Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a Honda Civic Si and want a firmer, more controlled ride with a lower center of gravity, choosing the right lowering springs matters. The right springs change how your Civic Si turns, brakes, and looks without the complexity or cost of a full suspension overhaul. This guide covers seven shortlisted options tailored to the Civic Si and compares their expected drop heights, spring rates, and effects on ride comfort.You will find the top choices for street-focused handling and improved stance, plus practical notes on installation considerations and long-term wear. Use the criteria we outline to match a spring set to your driving priorities and local roads before you buy.
Looking for other parts? See all Honda Civic parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Truhart Lowering Springs for 2016+ Honda Civic |  |
| Best Quality Built to a higher standard if you want something more solid | Eibach PRO-KIT Lowering Coil Spring Kit for Honda Civic (2016–2021) |  |
| Best Value The sweet spot between price and what you get | maXpeedingrods Lowering Springs for Honda Civic (2016–2024) / Acura Integra (2023–2025) |  |
| Best Budget The cheapest option that still gets the job done reliably | AJP Distributors 1.5" Front & Rear Lowering Coil Springs for Civic Si (2006–2011) |  |
| Highest Rated A top-rated pick with lots of positive feedback | Godspeed Traction-S Lowering Spring Set for Honda Civic 2012–2015 |  |
| Most Popular A crowd favorite that many people choose with confidence | D2 Pro Lowering Springs for 2016–2025 Civic / 2017–2025 Civic Si / 2022+ Integra |  |
| Best Seller A high-volume bestseller chosen again and again | Touring Tech Performance Lowering Springs for 2016–2024 Honda Civic & 2017–2024 Civic Si |  |
1. Truhart Lowering Springs for 2016+ Honda Civic
| Material | 55 chrome silicon steel |
|---|---|
| Front Drop | ~1.7–2.0 inches |
| Rear Drop | ~1.9–2.0 inches |
| Fitment | 2016+ Honda Civic (Coupe, Sedan, Hatch) |
These Truhart lowering springs are built from 55 chrome silicon steel and designed to lower the front and rear of compatible 2016+ Civics by roughly 1.7 to 2.0 inches depending on body style. In everyday use they give a firmer ride and reduced body roll compared with stock springs, which sharpens turn-in and improves cornering for drivers who want a more engaging feel. Installation is a direct replacement for the factory springs and can be paired with upgraded shocks or Truhart sport dampers for best results. The springs include a lifetime unlimited mileage warranty, which helps if you plan to keep the car long term. Expect a firmer ride over rough roads and slightly reduced ground clearance, so be prepared for speed bumps and steep driveways. These are a balanced choice for drivers seeking improved handling and a lowered stance without extreme drop or track-only stiffness.
Best for: Buyers who want a balanced handling upgrade and a modest, sporty drop for a 2016+ Civic while keeping daily drivability as a priority.
Less Ideal for: Drivers who need maximum ride comfort over rough roads, frequent steep driveway clearance, or those seeking an aggressive track-only drop should consider alternatives.
- Constructed from 55 chrome silicon steel for durability and fatigue resistance
- Moderate drop (about 1.7–2.0 in) improves handling and stance without extreme lowering
- Direct-fit design for 2016+ Civic models simplifies installation
- Lifetime unlimited mileage warranty provides long-term coverage
- Produces a firmer ride and reduced ground clearance that may be uncomfortable on rough roads
Verdict: A practical lowering spring set that sharpens handling and gives a clean stance for 2016+ Civics while keeping daily usability in mind.
2. Eibach PRO-KIT Lowering Coil Spring Kit for Honda Civic (2016–2021)
| Brand | Eibach |
|---|---|
| Model | PRO-KIT |
| Compatibility | Honda Civic 2016-2021 |
| Exterior | Powder Coat |
The Eibach PRO-KIT is a factory-style lowering spring set intended to drop ride height while keeping a near-stock ride quality. Designed for 2016–2021 Honda Civic models, the kit replaces all four coil springs with progressive-rate units that reduce body roll and improve cornering response. In everyday use the springs give a noticeable visual drop and firmer feel without making the ride harsh for daily driving. They are powder-coated for corrosion resistance and marketed to improve handling and fuel economy by lowering the center of gravity. Expectations should be realistic: the rear drop on some sedan configurations is milder than front, so the overall stance can remain a bit higher in back. These springs are a straightforward bolt-in handling upgrade for drivers who want crisper steering and reduced wheel gap without the expense or complexity of coilovers, but drivers seeking maximum drop or adjustable ride height will need a different solution.
Best for: Drivers focused on improving cornering and reducing body roll while preserving a comfortable daily ride; ideal for enthusiasts who want a clean lowered look with reliable, bolt-on fitment.
Less Ideal for: Drivers seeking large ride-height reductions, adjustable suspension setup, or track-specific tuning should consider coilovers or adjustable spring options instead.
- Progressive-rate design balances sharper handling with comfortable daily ride.
- Full four-spring kit ensures consistent front and rear behavior.
- Black powder-coat finish offers corrosion protection for longer life.
- Direct replacement fitment for 2016–2021 Honda Civic models simplifies installation.
- Not the lowest possible drop on some sedan rear suspensions, so stance may remain uneven.
- No height adjustability compared with coilovers.
Verdict: Choose the Eibach PRO-KIT if you want a dependable, factory-friendly lowering spring that sharpens handling and cleans up the Civic's stance without sacrificing everyday comfort.
3. maXpeedingrods Lowering Springs for Honda Civic (2016–2024) / Acura Integra (2023–2025)
| Fitment | Honda Civic 2016-2024, Acura Integra 2023-2025 |
|---|---|
| Material | SAE 9254 cold-wound steel |
| Testing | 200,000-cycle fatigue; 720-hour salt spray |
| Installation | Direct bolt-on |
These maXpeedingrods lowering springs are a bolt-on option that reduce ride height to sharpen cornering and reduce body roll while retaining usable ride comfort for daily driving. Made from SAE 9254 cold-wound steel with an anti-corrosion coating, the springs are tested for fatigue and salt-spray resistance so they should hold up to repeated use and road moisture. Installation is straightforward for anyone comfortable with basic suspension work and the springs are compatible with factory or aftermarket dampers, which keeps upgrade paths open. On the road they lower the center of gravity and make steering responses feel more direct, though the ride becomes noticeably firmer compared with stock. These are aimed at buyers who want a measurable handling improvement and a cleaner stance without swapping to full coilovers. Expect good value for the price but understand the setup sacrifices some compliance and will change suspension tuning, which may require alignment after fitment.
Best for: Buyers who want a practical, cost-effective handling upgrade and a lower stance for spirited street driving while keeping daily usability.
Less Ideal for: Drivers who prioritize a plush, factory-like ride or who need fully adjustable suspension tuning for track-focused setups.
- Cold-wound SAE 9254 steel construction for durability
- Anti-corrosion coating and 720-hour salt spray testing for rust resistance
- Tested for 200,000-cycle fatigue for long-term reliability
- Direct bolt-on design compatible with factory and aftermarket shocks
- Stiffer ride quality compared with stock suspension
- Long-term durability on high-mileage cars not yet established
Verdict: A budget-conscious lowering spring that delivers clearer handling and a sportier look for daily-driven Civics while remaining a simple bolt-on upgrade.
4. AJP Distributors 1.5" Front & Rear Lowering Coil Springs for Civic Si (2006–2011)
| Compatible model years | 2006-2011 Civic Si |
|---|---|
| Lowering drop | 1.5" front / 1.5" rear |
| Manufacturer | AJP Distributors |
These AJP coil lowering springs are a simple, budget-friendly way to lower a 2006–2011 Civic Si by about 1.5 inches front and rear. Installed in place of the factory springs, they reduce ride height for improved looks and a slightly sharper turn-in feel at typical street speeds. The kit is compact and focused: there are no shocks or hardware included so installation requires either reusing factory struts or pairing with compatible dampers. Expect a firmer, sportier ride and reduced wheel gap; road harshness increases on rough surfaces and very low-speed compliance is diminished. For drivers prioritizing cost and appearance over a fully tuned suspension, these springs give an immediate visual and handling change without extensive modification. Professional installation is recommended if you do not have spring compressors and strut servicing experience.
Best for: Buyers looking for an inexpensive way to lower their Civic Si for improved appearance and a firmer street feel who are comfortable reusing existing suspension components or adding compatible dampers.
Less Ideal for: Drivers seeking a fully balanced suspension overhaul, maximum ride comfort, or track-focused damping should consider complete spring-and-shock kits or performance coilovers instead.
- Specifically calibrated for an approximate 1.5 inch drop front and rear for a uniform lowered stance
- Simple swap-in design that works with existing struts so no full suspension replacement is required
- Affordable option for drivers who want lowered stance and firmer handling without major expense
- Does not include shocks or strut hardware so matching dampers may be needed for optimal performance
Verdict: AJP's 1.5 inch lowering springs deliver a clear, affordable stance and firmer street handling for 2006–2011 Civic Si owners who want a low-cost visual and performance upgrade.
5. Godspeed Traction-S Lowering Spring Set for Honda Civic 2012–2015
| Fitment | Honda Civic 2012–2015 (FG/FB) |
|---|---|
| Spring wire | SAE 9254 |
| Average drop | Front 1.4" Rear 1.5" |
| Intended use | Designed to work with factory shocks |
Godspeed Traction-S lowering springs are cold-wound from SAE 9254 spring wire and heat treated to resist sag and keep spring rates consistent over time. They are intended to be used with the Civic's factory shocks but pair well with upgraded performance dampers for firmer control. Installation is straightforward for a competent DIYer or shop and gives a noticeable stance change of roughly 1.4 inches front and 1.5 inches rear, with many owners reporting slightly deeper drops. In use the springs tighten body roll and improve turn-in while maintaining a ride that is close to stock comfort rather than harsh track stiffness. Build details such as multi-step heat treatment and precision testing aim to reduce premature sag and maintain ride height. Limitations to expect are the usual compromises of lowering springs: you get improved handling but not the tunable damping or corner-weighting of coilovers, and front spring labeling or minor drop variance has been reported so checking orientation and ride height after install is wise.
Best for: Buyers who prioritize durable, reliable lowering with improved handling but still want a comfortable daily-driving experience on a 2012–2015 Civic Si.
Less Ideal for: Drivers seeking fully adjustable suspension, track-focused corner tuning, or a customizable ride height should consider coilovers or a matched shock and spring kit instead.
- Cold-wound SAE 9254 spring wire with heat treatment for greater tensile strength and reduced sag risk
- Designed to work with factory shocks while being compatible with aftermarket performance dampers
- Noticeable, street-friendly drop that sharpens handling without making the ride overly harsh
- Precision tested and inspected to provide consistent spring rates across the set
- Does not include upgraded shocks or adjustable damping so suspension tuning is limited to spring change
- Reported small inconsistencies in front spring labeling and slight variance from advertised drop heights
Verdict: A durable, street-friendly lowering spring set that sharpens handling and resists sag, ideal for Civic owners who want reliable daily-driven performance without swapping shocks.
6. D2 Pro Lowering Springs for 2016–2025 Civic / 2017–2025 Civic Si / 2022+ Integra
| Material | Chrome Silicon Steel |
|---|---|
| Manufacturing | Cold-wound and heat-treated |
| Spring design | Progressive-rate coils |
| Fitment | Direct factory replacement |
| Certification | ISO 9001; TÜV |
The D2 Pro lowering springs are a direct-fit spring kit designed to lower the car, reduce body roll, and sharpen cornering response for street and light-track use. Built from high-tensile chrome silicon steel with cold-wound, heat-treated manufacturing and a corrosion-resistant finish, the springs use a progressive-rate coil design that firms up under compression to improve mid-corner control while retaining a reasonable ride on daily roads. Installation is straightforward for someone with basic mechanical skill and typical tools though front strut work takes more time and help is recommended. Real-world owner feedback matches the spec sheet: roughly 1.5 to 2 inches of drop, a noticeably firmer ride over bumps, and improved visual stance and handling. Some wheel sizes and aggressive offsets can cause rubbing, so check tire and wheel clearance before buying. The springs are bench-tested and made in a certified facility, which supports long-term durability, but they will make rough surfaces feel firmer than stock and are not a substitute for adjustable coilovers if you need track-level tunability.
Best for: Buyers who want a reliable, factory-fit lowering spring that improves handling and stance for daily-driven Civic Si vehicles while prioritizing proven performance and community feedback.
Less Ideal for: Drivers seeking adjustable ride height or track-only suspension tuning should consider coilovers or more adjustable systems instead.
- Progressive-rate design improves corner control while keeping daily comfort reasonable
- Cold-wound, heat-treated chrome silicon steel construction for consistent spring-rate output
- Direct fit for specified Honda Civic and Integra models so installation follows factory points
- Durable surface finish and factory-tested manufacturing with ISO 9001 and TÜV involvement
- Firmer ride over bumps compared with stock springs, which may feel harsh on rough roads
- Potential for wheel or tire rubbing with certain wheel sizes and offsets
Verdict: A proven, factory-fit lowering spring kit that sharpens handling and stance for daily-driven Civic Si owners who value reliable, community-backed upgrades.
7. Touring Tech Performance Lowering Springs for 2016–2024 Honda Civic & 2017–2024 Civic Si
| Maximum Lifting Height | 1.5 Inches |
|---|---|
| Included Components | Lift Springs |
| Automotive Fit Type | Vehicle Specific Fit |
| Brand | Touring Tech |
These Touring Tech Performance lowering springs replace the factory front springs to lower compatible Honda Civic and Civic Si models roughly 1.5 inches. Built from 55 chrome silicon steel, they are intended to give a firmer, more planted feel and reduced body roll for spirited street driving and cornering. Installation is typical for a spring swap and is usually done with strut disassembly or at a shop; after installation you can expect a lower center of gravity, crisper turn-in, and a sportier appearance. The springs are vehicle specific which simplifies fitment and they include a lifetime unlimited mileage warranty. Because they are progressive-rate performance springs, ride quality will be firmer than stock and road harshness over severe bumps is possible, so they are best if you prioritize handling and stance over a plush ride. These springs cover compatible Civic model years listed by the manufacturer and exclude convertible variants, and they do not include strut or shock upgrades which some buyers pair with lowering springs for best results.
Best for: Buyers who want a reliable, factory-fit lowering solution that sharpens handling and improves stance while preferring a conservative, proven upgrade path and warranty protection.
Less Ideal for: Drivers who want a softer, comfort-focused ride or who plan to lower the car dramatically and need a full suspension kit with matched shocks and alignment parts.
- Vehicle-specific fit for 2016–2024 Civic and 2017–2024 Civic Si simplifies selection and installation planning
- Constructed from 55 chrome silicon steel for strength and durability above typical factory spring material
- Designed to lower the front about 1.5 inches for improved handling and reduced body roll
- Includes a lifetime unlimited mileage warranty for long-term peace of mind
- Only front lowering springs are listed and shocks or struts are not included so additional suspension upgrades may be needed for optimal performance
Verdict: A conservative, vehicle-specific lowering spring set that improves handling and stance while giving risk-averse buyers a durable, warrantied upgrade.
Choosing the Right Honda Civic Si Lowering Springs: Key Factors to Consider
Drop Height and Visual Stance
Drop height directly affects the Civic Si's visual stance and handling characteristics. A modest drop of one to two inches usually tightens body roll and lowers the center of gravity without creating excessive tire rub or ground-clearance problems on common roads. Larger drops can improve cornering in controlled settings but increase the chance of scraping on driveways and curbs.
Consider how the chosen drop interacts with wheel and tire size because the combination changes fender clearance and may necessitate minor alignment tweaks. Also think about load conditions such as passengers and cargo since a rated static drop can compress differently under weight, altering both appearance and contact patch behavior.
Spring Rate and Handling Tradeoffs
Spring rate is perhaps the single most important technical factor for handling and ride quality. Higher rates reduce body motion during cornering and braking but transmit more road feedback to the cabin, which can feel harsh on rough surfaces. Lower rates improve comfort but may allow excessive roll and delayed steering response.
Match spring rates to your driving priorities. If you do occasional spirited driving, choose rates that firm up roll without upsetting front-to-rear balance. For daily commuting on varied pavement, favor springs with progressive characteristics that provide compliance for small bumps and stiffer resistance when cornering.
Progressive Versus Linear Design
Progressive springs change stiffness as they compress, offering a softer initial stroke for comfort and increasing firmness deeper in the travel for control. Linear springs maintain a consistent rate through the travel, giving predictable handling and easier setup for track work or aggressive street driving.
For the Honda Civic Si, progressive springs are a good choice if you want reduced NVH and comfortable daily driving with improved cornering when pushed. Linear springs suit owners focused on consistent handling and precise feedback, but they often require careful matching with dampers to avoid an overly harsh ride.
Ride Quality and NVH
Lowering springs change how road noise and vibration reach the cabin because they alter suspension dynamics and spring isolation. Firmer springs reduce body motion but can amplify pothole impacts and increased vibration at resonance frequencies. That tradeoff affects long trips and daily comfort more than peak lap times.
Consider how often you encounter rough pavement. If you live where roads are uneven, prioritize springs designed to retain some compliance. Also plan for an alignment after installation since incorrect camber or toe will worsen tire wear and perceived harshness.
Fitment and Installation Considerations
Correct fitment for the Civic Si is essential to avoid clearance issues and to maintain safe suspension geometry. Springs must be specified for the model and trim to ensure proper seat engagement and ride height control. Some springs can require additional components like extended top mounts, updated bump stops, or slight fender rolling on heavily lowered setups.
Installation typically involves disassembling struts and springs, which requires a spring compressor and alignment afterward. Factor in the labor, the need for quality replacement hardware, and whether the springs come with installation guidance specific to the Civic Si.
Durability and Corrosion Protection
Springs are subject to repeated compression cycles and environmental exposure, so coatings and heat treatment matter for long-term performance. Good corrosion protection helps prevent pitting and loss of preload that can change ride height and ride quality over time.
Inspect warranty coverage and stated material processes where available. Durable finishes and consistent manufacturing tolerances reduce the chance of premature sag or uneven settling between corners, maintaining handling balance for the Civic Si.
How Lowering Springs Change Civic Si Handling
Lowering springs reduce the Civic Si's center of gravity and reduce body roll, which changes the car's weight transfer during cornering and braking. That translates into crisper turn-in and a more planted feel when the springs are matched to appropriate dampers.
The net effect depends on drop height, spring rates, and whether the springs are progressive or linear. Small, well-chosen drops often yield the most useful handling gains for everyday driving because they maintain usable suspension travel and reduce the need for other suspension modifications.
- Reduced body roll for more stable cornering
- Sharper steering response due to altered roll center behavior
- Potentially higher contact patch consistency under load
Matching Springs to Damping
Springs and dampers work together; installing lower springs without compatible dampers can leave the Civic Si feeling unsettled or bouncy. Some springs are tuned to work with the stock dampers within a certain drop range, while others perform best with upgraded shocks or struts.
If you plan to keep stock dampers, choose springs that specify compatibility with factory damping. For more aggressive spring rates, expect to pair them with stronger damping to control rebound and compression and to preserve ride quality across different road surfaces.
- Check manufacturer guidance on damper compatibility
- Consider shock valving that matches spring rate increases
- Expect improved cornering with matched spring-damper pairs
Installation Practicalities for Civic Si Owners
Replacing springs on the Civic Si is a common DIY job for experienced enthusiasts but it requires proper tools and safety procedures. The work involves compressing springs, disassembling strut assemblies, and reinstalling components in the correct orientation with new mounts or hardware if recommended.
Plan for a professional alignment after installation to correct camber and toe. Also inspect bump stops and fender clearance during a test drive and make small adjustments to prevent rubbing or premature wear.
- Use a quality spring compressor and torque specifications
- Re-check wheel alignment and inspect for tire rub
- Allow for a break-in period as springs and bushings settle
Maintenance and Long-Term Considerations
Over time, springs can settle slightly, especially if exposed to corrosive environments. Regular visual inspections for damage or rust are important to maintain consistent ride height and handling balance. If you notice uneven ride height between corners, have the suspension checked.
Retain any original hardware removed during installation in case you revert to stock. Keep records of drop specifications and alignment settings to aid future adjustments or repairs.
- Inspect springs annually for corrosion or cracking
- Monitor ride height and handling feel over the first few thousand miles
- Replace worn mounting hardware to maintain secure fitment
Legal and Practical Road Use
Lowering the Civic Si alters ground clearance and can affect compliance with local vehicle regulations. Check local rules regarding minimum ride height or vehicle modifications before installing any springs that substantially reduce clearance.
Practically, consider common terrain such as speed bumps, driveways, and parking ramps. A moderate drop preserves usability across most everyday situations, while extreme lowering may require route planning to avoid scraping.
- Confirm local modification regulations
- Anticipate clearance limits on steep driveways
- Balance aesthetics with everyday practicality
Still looking for the perfect fit?
Select your Honda Civic configuration to see the most relevant Lowering Springs recommendations
How We Chose the Best Honda Civic Si Lowering Springs
We prioritized lowering springs that deliver predictable handling and consistent ride quality for the Honda Civic Si across everyday and spirited driving. Our editorial filters focused on concrete, vehicle-specific performance metrics and real-world fitment considerations. We evaluated listed drop height and spring rate ranges to estimate changes in handling balance, checked recommended corner weight or spring matching guidance where available, and assessed claims about progressive or linear spring behavior to understand mid-stroke compliance.Durability and materials were another key axis: we favored springs with corrosion resistance treatments and consistent manufacturing tolerances that help maintain ride height over time. Ride comfort was judged by stated spring rates and design intent, distinguishing street-oriented progressive springs from firmer performance-oriented options. Installation and serviceability also mattered, so we looked for springs that do not normally require additional modifications such as camber kits or extended bump stops on the Civic Si.We excluded any product lacking explicit Honda Civic Si fitment data or that required major suspension changes to avoid unexpected alignment or clearance issues. Finally, we emphasized options that strike a balance between lowering, handling improvement, and daily drivability for this specific model.
Our full evaluation process is outlined in our review methodology.
FAQ
How much lower will lowering springs drop my Civic Si?
Typical lowering springs for the Civic Si reduce ride height by about 1 to 2 inches, though exact numbers vary by product. Drop height depends on spring length and design, and heavier loads or worn components can slightly alter measured height.
Will lowering springs affect alignment and tire wear?
Yes. Lowering changes suspension geometry and usually increases static negative camber, which can accelerate inner tire wear if not corrected. A professional alignment after installation is important to set camber and toe within recommended ranges.
Are lowering springs difficult to install on a Civic Si?
Installation requires strut disassembly and a spring compressor, so experienced DIYers can complete the job but many owners prefer a shop for safety and to ensure correct torque and reassembly. Plan for a post-installation alignment regardless of who installs them.
Can I keep my stock shocks with lowering springs?
It depends on the spring drop and rate. Mild drops are often compatible with stock dampers, but more aggressive or stiffer springs usually benefit from upgraded shocks to control rebound and maintain ride quality.
Do progressive springs give a more comfortable ride on the Civic Si?
Progressive springs typically offer a gentler initial stroke, which can improve comfort over small bumps while still providing stiffer resistance under heavier compression. For owners prioritizing daily comfort and occasional spirited driving, they are often a sensible choice.
Will lowering springs change my Civic Si's warranty or inspections?
Modification impacts on warranties and inspections vary by jurisdiction and warranty terms. Lowering springs are a common modification, but you should confirm how aftermarket suspension changes affect any remaining coverage and local inspection requirements.
Final Verdict
Choosing lowering springs for your Honda Civic Si is about balancing the visual and handling benefits against ride comfort and everyday practicality. Prioritize a drop height and spring rate that fit your usual roads and driving style, and match springs to damping capability to avoid an unsettled ride.Focus on options that provide corrosion protection and clear Civic Si fitment information, and plan for proper installation and alignment. With the right compromise between drop, rate, and durability, you can achieve a sharper stance and more confident handling without sacrificing daily usability.
Explore More:
- Check out all Honda Civic parts & accessories
- Explore Lowering Springs Maintenance & Repair Guides
- Explore Suspension & Steering
- Browse all Auto Parts
