Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your 1998-2002 Honda Accord is showing vibration, noise, or uneven tire wear, the wheel hub assembly is a likely culprit. Replacing the hub and bearing can restore smooth steering, eliminate grinding noises, and prevent premature tire and suspension damage. This guide focuses on the Accord produced between 1998 and 2002 and covers the practical considerations that matter for both front and rear hub applications.Below are the top shortlisted wheel hub assemblies chosen for this Accord. The selections emphasize correct fitment, bearing life, and ease of installation. Read on for the evaluation criteria and what to check before you buy or install a replacement hub assembly.
Looking for other parts? See all Honda Accord parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | TRQ 4-Piece Front Wheel Bearing and Hub Kit (direct-fit) |  |
| Best Quality Built to a higher standard if you want something more solid | MOOG 512179 Wheel Bearing and Hub Assembly |  |
| Best Value The sweet spot between price and what you get | TRQ Front Wheel Bearing and Hub Kit, 4-Piece for 1998–2002 Honda Accord |  |
| Best Budget The cheapest option that still gets the job done reliably | Autoround Front Wheel Hub and Bearing Assembly BR930591K for 1998–2002 Honda Accord 2.3L |  |
| Highest Rated A top-rated pick with lots of positive feedback | Detroit Axle Rear Wheel Bearing Hub Assembly Kit (pair) for 1998–2002 Honda Accord 2.3L, 4‑lug with ABS |  |
| Most Popular A crowd favorite that many people choose with confidence | Detroit Axle Wheel Bearing and Hub Kit for 1998–2002 Honda Accord (2 Front, 2 Rear) |  |
1. TRQ 4-Piece Front Wheel Bearing and Hub Kit (direct-fit)
| Quantity | 4 Piece |
|---|---|
| Bearing Type | Ball |
| Exterior | Machined |
| Manufacturer | TRQ |
| Model | TRQ BHA53198 4 Piece Wheel Bearing & Hub Kit |
This TRQ kit supplies two wheel bearings and two wheel hubs designed to replace worn front assemblies on compatible Hondas and Acuras. It is typically used by DIYers or independent shops performing front-end service on 1998–2002 Honda Accord V6 and other listed models; TRQ emphasizes pre-assembled, direct-fit components to speed installation and avoid machining. Notable features include ball-type bearings, machine-finished hubs, and a four-piece set that covers both sides so you can change bearings and hubs together. In practice the kit simplifies replacement and can restore wheel smoothness and reduce noise compared with a failing hub, and TRQ’s DIY video resources help with fitment and install steps. Limitations to keep in mind are occasional fitment inconsistencies reported on some model years and vehicle configurations, so confirming exact reference numbers or VIN fitment is important before ordering. This product is a practical, cost-conscious alternative to factory parts when the correct fit is verified.
Best for: Buyers looking for an affordable, ready-to-install replacement kit to refresh worn front wheel hubs and bearings on covered late 1990s to early 2000s Hondas and Acuras, and who prioritize straightforward DIY installation and value.
Less Ideal for: Drivers unwilling to verify exact VIN or reference numbers before purchase or those who need guaranteed factory-original parts and dealer-level warranty support.
- Includes both hubs and bearings so both sides can be replaced at once
- Pre-assembled, direct-fit design intended to reduce installation time
- Ball-type bearings and machined hubs for smooth operation
- TRQ provides DIY videos and compatibility guidance to aid installation
- Some buyers report fitment problems on certain model years or configurations requiring verification
Verdict: A complete, direct-fit hub and bearing kit that lets value-minded DIYers restore front-wheel smoothness on the specified 1998–2002 Honda Accord and similar models when fitment is confirmed.
2. MOOG 512179 Wheel Bearing and Hub Assembly
| Included Components | Wheel Bearing and Hub Assembly |
|---|---|
| Bearing Type | Ball Bearing |
| Material Type | Metal |
| Compatible Lubricant | Grease |
The MOOG 512179 is a preassembled front wheel bearing and hub unit intended as a direct replacement for specified Honda Accord and Acura TL applications. It combines a precision ball bearing with a sealed hub to provide smooth rotation and minimize noise under normal driving and highway speeds. MOOG highlights a quad lip seal and corrosion-resistant studs, which help keep moisture and debris out and simplify future removal. Installation is straightforward for a mechanic or competent DIYer because the unit comes complete with the bearing and studs already fitted, reducing press-fit steps. The design emphasizes durability and a quieter ride rather than high-performance racing use, so drivers seeking improved handling through lighter or sport-specific hubs will not find those features here. For routine and spirited street driving the MOOG unit delivers reliable, long-lived service and maintains factory steering and ABS sensor integration where applicable.
Best for: A buyer who wants a reliable, factory-quality replacement that restores quiet, predictable wheel rotation and keeps maintenance simple for street and spirited driving on 1998–2002 Honda Accords.
Less Ideal for: Drivers seeking a lightweight or track-focused hub upgrade or those planning extreme performance modifications should consider dedicated performance parts instead.
- Direct-fit preassembled unit simplifies installation and avoids press-fit bearing work
- Sealed bearing and quad lip seal help keep out water and road debris
- Coated wheel studs resist corrosion for easier future removal and torqueing
- Designed to minimize noise for a quieter ride and preserve ABS/traction sensor function
- Not engineered for weight savings or high-temperature race conditions
Verdict: Choose the MOOG 512179 if you want a quiet, durable direct-fit hub assembly that restores factory-like performance and simplifies installation for 1998–2002 Honda Accord applications.
3. TRQ Front Wheel Bearing and Hub Kit, 4-Piece for 1998–2002 Honda Accord
| Position | Front |
|---|---|
| Bearing Type | Ball |
| Quantity | 4 Piece |
| Manufacturer | TRQ |
| Model | TRQ BHA53172 |
This TRQ kit supplies two front wheel bearings and two front wheel hubs intended as direct replacements for 1998–2002 Honda Accord L4 2.3L front applications. It is packaged as a 4-piece set with pre-assembled hubs to simplify installation and reduce the need for pressing bearings into place. Typical use is a front hub/bearing replacement when you hear humming, experience wheel play, or are servicing brakes and suspension; the machined exterior and ball bearing design aim to restore factory-like fit and function. Buyers will appreciate shrink-wrapped bearings and clear fitment references that match multiple OEM part numbers, which helps confirm compatibility. Reviewers report a mix of outcomes: many note good initial fit and noise elimination while some experienced premature failure or missing parts on arrival, so careful inspection on receipt and professional installation are advised. This kit is best when you want a straightforward, direct-fit replacement that speeds a DIY or shop job, but expect variable longevity compared with higher-end OE-level options.
Best for: Buyers who prioritize a practical, cost-effective direct-fit replacement to get a 1998–2002 Accord back on the road quickly without fabrication or modification.
Less Ideal for: Drivers seeking the longest-life, premium factory-quality bearing assemblies or those who prefer guaranteed commercial warranties should consider higher-tier alternatives or dealer parts.
- Direct-fit design with pre-assembled hubs to simplify installation
- Includes both bearings and hubs so fronts are replaced as a matched set
- Matches multiple OEM reference numbers for straightforward fit confirmation
- Shrink-wrapped packaging protects bearings from contamination during storage and transit
- Some customers reported premature failure after limited mileage, indicating variable long-term durability
- A few orders arrived with missing components requiring returns or replacements
Verdict: A convenient, direct-fit four-piece front hub and bearing kit that lets practical DIYers or shops replace both bearings and hubs on 1998–2002 Honda Accords quickly.
4. Autoround Front Wheel Hub and Bearing Assembly BR930591K for 1998–2002 Honda Accord 2.3L
| Position | Front |
|---|---|
| Lug count | 4 Lugs |
| ABS | Non-ABS |
| Manufacturer part number | BR930591K |
This Autoround front wheel hub and bearing assembly is a direct replacement unit designed for 1998–2002 Honda Accord 2.3L models. It combines the hub and bearing into a single preassembled piece so you can swap it into the front left or right position without pressing bearings separately. The unit is 4-lug and non-ABS, so it fits Accord configurations that do not use an ABS tone ring. In practice the assembly simplifies installation for DIYers and independent shops because it reduces steps and bench time compared with rebuilding a hub and bearing separately. Autoround states the part is quality tested to meet or exceed factory performance and the listing notes a three year QA support period. Limitations to keep in mind are compatibility only with the specified model years and engine, and the non-ABS design means it will not work on vehicles that require an ABS-equipped hub. For budget-focused buyers who need a straightforward replacement hub for a compatible Accord, this offers a cost-effective, ready-to-install option.
Best for: Buyers seeking an affordable, ready-to-install front hub for a 1998–2002 Honda Accord 2.3L who prioritize straightforward replacement and lower parts cost over advanced features.
Less Ideal for: Drivers whose vehicles use ABS-equipped front hubs or those who want a hub specified for multiple vehicle models or years beyond the Accord 1998–2002 2.3L scope.
- Preassembled hub and bearing reduces installation time and avoids bearing press work
- Listed specifically for 1998–2002 Honda Accord 2.3L so fitment is clear
- 4-lug non-ABS design matches non-ABS Accord configurations
- Manufacturer states quality testing and offers three years of QA support
- Not compatible with ABS-equipped front hubs
- Fitment limited to the listed year range and engine size
Verdict: A budget-friendly, preassembled front hub for 1998–2002 Honda Accord 2.3L that simplifies installation for non-ABS applications.
5. Detroit Axle Rear Wheel Bearing Hub Assembly Kit (pair) for 1998–2002 Honda Accord 2.3L, 4‑lug with ABS
| Fitment | 1998–2002 Honda Accord 2.3L rear, 4‑lug, 4‑wheel disc brakes |
|---|---|
| Kit contents | 2x rear wheel bearing hubs (left and right) |
| ABS Type | Tone ring |
This Detroit Axle kit supplies two rear wheel hub and bearing assemblies built to match factory fit and function for 1998–2002 Honda Accord 2.3L models with 4‑lug rear wheels and ABS tone rings. Each assembly arrives as a complete hub with bearing preinstalled, which simplifies installation because you do not need to press bearings in and out. The listing highlights forged bearing steel and high‑frequency quenching for improved wear resistance and corrosion protection, which should extend service life under normal driving conditions. Use is straightforward for a mechanic or competent DIYer replacing noisy or worn rear hubs; the assemblies bolt to the knuckle and accept the existing brake and wheel hardware. Limitations include that this is an aftermarket remanufactured-style part rather than a factory-branded hub, so final finish and absolute precision can vary compared with new factory units. Also the kit is specific to the 2.3L Accord rear 4‑lug disc configuration, so it will not fit other brake or lug arrangements.
Best for: Buyers who prioritize long-lasting, reliable repairs for an older Accord and want a ready-to-install hub pair that reduces install time and rework.
Less Ideal for: Drivers who need hubs for a different brake or lug configuration or those who require an OEM-branded new hub for showroom‑original restoration projects.
- Sold as a complete pair with bearings preinstalled for faster, cleaner installation
- Manufactured with high‑grade bearing steel and heat treatment for improved wear and rust resistance
- Designed to meet factory replacement fit and function for the specified Accord rear hub configuration
- Aftermarket remanufactured-style part so surface finish and tolerances may differ from new factory-brand hubs
Verdict: Choose this kit when you want a dependable, ready-to-install pair of rear hub assemblies that restore reliable wheel bearing performance on 1998–2002 Accord 2.3L rear 4‑lug disc models.
6. Detroit Axle Wheel Bearing and Hub Kit for 1998–2002 Honda Accord (2 Front, 2 Rear)
| Position | Rear Left or Right |
|---|---|
| Lugs | 4 Bolt |
| ABS Type | Tone Ring |
| Vehicle Fit | 1998–2002 Honda Accord 2.3L, 4-wheel disc |
This Detroit Axle kit supplies two front wheel bearings and two rear hub bearing assemblies designed for 1998–2002 Honda Accord 2.3L cars with 4-wheel disc brakes and 4-bolt lugs. It installs like a direct factory-replacement set and includes tone-ring rear hubs for vehicles with ABS. The parts are tested for impact, wear, and fatigue which suggests decent durability for daily driving and light towing. Typical use is to renew noisy or loose bearings, restore smooth rolling, and eliminate ABS tone-ring related faults on the rear hubs. Expect straightforward fitment where the factory-style mounting and lug pattern match. Limitations are that the kit targets a specific Accord engine and brake configuration only and does not include hardware like bolts or additional seals beyond the hub assemblies, so you may need to reuse or separately source fasteners during installation. For buyers who value parts that match factory fit and come from a recognizable aftermarket brand, this kit covers the full axle set in one purchase.
Best for: Buyers who want a full axle replacement that matches factory fit and prefer a tested aftermarket brand with substantial customer feedback to reduce risk.
Less Ideal for: If you prefer fully preassembled hub units with all new mounting hardware or need fitment outside the specified Accord 2.3L with 4-wheel disc brakes, look at other options.
- Complete 4-piece kit covers both front and rear replacements in one purchase
- Includes rear hubs with tone ring for ABS compatibility
- Designed for direct factory-style fitment to the specified Accord years and configuration
- Kit does not list included mounting hardware or seals, so additional parts may be required for installation
Verdict: A convenient, brand-backed four-piece bearing and hub kit that replaces front and rear factory-style assemblies for 1998–2002 Accord 2.3L cars, ideal for buyers who want a complete, tested aftermarket swap.
Choosing the Right 1998-2002 Honda Accord Wheel Hub Assembly: Key Factors to Consider
Fitment and Mounting Pattern
Correct fitment is the single most important factor when replacing a wheel hub assembly on a 1998-2002 Honda Accord. The assembly must match the Accord's wheel bolt pattern, hub flange diameter, and mounting bolt spacing so that it mates cleanly to the knuckle without requiring modification. Improper fitment can cause uneven torque on wheel studs, abnormal vibration, and premature component wear.
When evaluating fitment, confirm the assembly is specified for the 1998-2002 Accord year range and the exact position — front or rear. Also check if the assembly is intended for the specific drivetrain and brake configuration of your Accord to avoid interference with dust shields, ABS tone rings, or brake hardware.
Bearing Type and Preload
Wheel hubs use either pressed-in bearing units or integrated hub-bearings. For the 1998-2002 Accord, the bearing type affects serviceability and long-term preload stability. Proper bearing preload reduces play and minimizes noise and vibration during operation. A hub assembly that arrives with the bearing preinstalled and torqued to the correct specification eliminates guesswork and reduces the risk of incorrect bearing preload during installation.
Consider whether the hub's bearing seals and tolerances meet expected road conditions. Higher-quality bearings generally use tighter tolerances and better heat-treated races to resist wear, which translates to longer service life under city and highway driving.
Sealing and Corrosion Resistance
Seals keep contaminants out of the bearing and retain lubrication. On a vehicle like the 1998-2002 Accord that may see wet roads, salt, or gravel, effective sealing extends bearing life and helps prevent grinding noises. Look for assemblies with durable rubber or multi-lip seals and protective coatings on exposed metal surfaces.
Corrosion-resistant finishes on the hub flange and mounting surfaces reduce the chance of stuck bolts during future service and help maintain good electrical grounding paths when required. Good sealing and corrosion protection lower long-term maintenance needs and the risk of early failure.
ABS Tone Ring and Sensor Compatibility
Many Accord models in the 1998-2002 range use an ABS tone ring or integrated reluctor for wheel speed sensing. Replacement hubs should preserve the ABS sensor position and tone ring geometry to prevent false readings or ABS faults. If the hub assembly replaces or includes the tone ring, ensure the ring's tooth count and spacing match the original specification.
Incorrect ABS fitment can trigger error lights, alter braking system responses, and require additional diagnostic work. Confirm compatibility with the specific ABS arrangement on your Accord before purchasing to avoid extra labor.
Ease of Installation
Installation complexity matters for owners planning DIY work or for minimizing shop labor. Assemblies that come preassembled with bearings and seals reduce presses and specialized tooling. Check whether the hub requires removal of the knuckle or can be replaced while the knuckle remains mounted, and whether common tools suffice for the job.
Also consider access to torque values and recommended procedures for the 1998-2002 Accord. A hub that simplifies alignment of the drive flange, wheel studs, and ABS wiring will save time and reduce the chance of installation errors that can lead to noise or premature wear.
Durability and Warranty
Durability expectations affect long-term ownership costs. Evaluate materials used for the hub flange, bearing race hardness, and the quality of grease supplied with the bearing. Hubs built with robust metallurgy and factory-correct heat treatments resist wear and maintain preload.
A clear warranty or stated expected service life provides additional assurance. While warranty terms vary, knowing what is covered and for how long helps set expectations and can indicate manufacturer confidence in the component's durability.
Common Symptoms of a Failing Hub Assembly on These Accords
Recognizing early symptoms can prevent more costly damage to tires and suspension components. Typical signs include a growling or grinding noise that changes with vehicle speed, pronounced vibration in the steering wheel, uneven or accelerated tire wear, and wheel play felt when the vehicle is lifted and the wheel is rocked by hand.
Noise that increases during turns often points to a front hub bearing losing lubrication or developing play. Rear hub issues may present more as humming or vibration through the floor rather than steering wheel feedback. Address symptoms promptly to avoid cascading failures to wheel studs, brake rotors, or suspension arms.
- Grinding or growling that varies with speed
- Looseness when rocking the wheel on a jack
- ABS warning light or intermittent ABS faults
- Uneven tire wear focused on one corner
Front Vs Rear Hub Considerations for 1998-2002 Accord
Front and rear hub assemblies have different loading and installation characteristics. Front hubs on the Accord typically experience higher steering and lateral loads and may integrate features for ABS or the drive axle on certain models. Rear hubs often encounter braking and longitudinal loads and sometimes differ in bearing size or seal design.
When choosing a replacement, confirm whether the hub is manufactured for front or rear placement. The expected service life and failure modes can differ, so match the part to the specific position to ensure correct bearing preload and longevity.
- Front hubs: higher lateral and steering loads
- Rear hubs: different bearing sizes and seal priorities
- Confirm front/rear designation before purchase
Preparing for Installation
Before starting, gather the service manual torque specs and recommended tools for the 1998-2002 Accord. Common preparatory steps include safely lifting and supporting the vehicle, removing the wheel, caliper, and rotor if necessary, and inspecting the knuckle and spindle surfaces for damage or excessive corrosion.
Clean mating surfaces thoroughly and verify that wheel studs and mounting bolts are in good condition. Replace any damaged fasteners and apply thread locker or anti-seize only where specified by the repair procedure. Having a torque wrench and an alignment layout plan will help you achieve correct final assembly.
- Have factory torque specs on hand
- Inspect knuckle and hub mating surfaces
- Replace damaged wheel studs or mounting bolts
Maintenance Tips to Extend Hub Life
Routine visual inspections can catch seal deterioration or contamination before the bearing fails. Check for grease leakage, rust on the flange, or wobble during periodic tire rotations. Keeping brake components in good condition reduces contamination risk from failing seals or heat damage.
Avoid repeated high-load situations like aggressive cornering or frequent heavy towing that accelerate bearing wear. If you drive in salted or wet conditions often, consider more frequent inspections and use corrosion-resistant hardware to prolong hub and bearing life.
- Inspect seals and flange for rust or grease leakage
- Rotate tires and check for uneven wear patterns
- Address brake system heat and contamination sources
How to Confirm Correct Fitment
Fitment confirmation begins with matching part specifications to the 1998-2002 Accord's axle and brake setup. Cross-check hub bolt pattern, flange diameter, ABS tone ring presence, and overall unit height. Measure or reference the OEM part dimensions when possible to ensure the replacement sits flush against the knuckle.
If the replacement includes a tone ring or is designed to work with ABS sensors, confirm the ring geometry and sensor gap meet the vehicle's requirements. Incorrect clearance can cause ABS chatter or sensor faults. When in doubt, consult the repair manual's exploded diagrams to verify mating points.
- Compare bolt pattern and flange dimensions to OEM specs
- Verify tone ring geometry for ABS-equipped hubs
- Measure overall assembly height relative to knuckle
Still looking for the perfect fit?
Select your Honda Accord configuration to see the most relevant Wheel Hub Assemblies recommendations
How We Chose the Best 1998-2002 Honda Accord Wheel Hub Assembly
We prioritized fitment accuracy for the 1998-2002 Honda Accord chassis and looked for hub assemblies designed to match factory mounting points and wheel bearing specifications. Durability was the next filter, favoring units with bearings and seals specified for long life under normal driving loads and resistant to water and road contaminants. We also evaluated serviceability: assemblies that reduce labor by coming pre-pressed with bearings and seals score higher because they minimize shop time and the chance of installation errors. Noise and vibration control were considered by checking design features that reduce play and rotational roughness. Corrosion resistance and finish were reviewed to ensure hubs hold up in varied climates and road conditions.Excluded items included hub components that require extensive machine work, partial kits that do not include the bearing, and parts with unclear fitment documentation for the 1998-2002 Accord. Final selections balanced reliable mechanical fit, bearing preload consistency, sealing quality, and ease of installation to reflect what typical Accord owners need when replacing hubs.
Our full evaluation process is outlined in our review methodology.
FAQ
How long should a wheel hub assembly last on a 1998-2002 Accord?
It often depends on driving conditions and maintenance, but many hub assemblies last well over 80,000 miles under normal driving. Exposure to water, road salt, or heavy loads can shorten service life, so periodic inspection is advisable.
Can I drive my Accord with a failing wheel hub assembly?
Driving with a failing hub bearing is risky. You may experience increased vibration, reduced steering control, and potential loss of wheel retention in severe cases. It is best to limit driving and have the assembly inspected and replaced promptly.
Does replacing the hub assembly require special tools on these Accords?
Basic hub replacements often require common tools and a torque wrench, but pressed-in bearings or seized components sometimes need a hydraulic press or puller. Choosing a preassembled hub reduces tool requirements and simplifies installation.
Will a bad wheel hub assembly trigger the ABS light on a 1998-2002 Accord?
Yes, if the hub assembly affects the ABS tone ring or the sensor signal, it can cause intermittent or persistent ABS warnings. Faults can arise from missing ring teeth, incorrect spacing, or sensor misalignment rather than the bearing itself.
Should I replace wheel studs or bolts when installing a new hub assembly?
Inspect studs and mounting bolts for stretch, rust, or damaged threads and replace any that are compromised. Reusing damaged fasteners can prevent proper torque application and lead to unsafe conditions.
How can I tell if the front or rear hub is the problem?
Front hub failures usually present as steering wheel vibration, growling during turns, or play when rocking the front wheel. Rear hub issues more commonly cause humming or vibration felt through the vehicle body and may not affect steering feel.
Final Verdict
For the 1998-2002 Honda Accord, prioritize correct fitment and bearing preload when selecting a wheel hub assembly. Confirm front or rear designation, ABS compatibility, and the presence of robust seals to avoid premature failure. Ease of installation and corrosion resistance will reduce labor and long-term maintenance.Balance these priorities based on how you drive the car and whether you plan to install the part yourself. Choosing a hub that matches the Accord's specifications and offers reliable sealing and bearing construction will deliver the most consistent results and peace of mind.
Explore More:
- Check out all Honda Accord parts & accessories
- Explore Wheel Hub Assemblies Maintenance & Repair Guides
- Explore Wheels & Tires
- Browse all Auto Parts
