Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your 2013-2017 Honda Accord is showing signs of vibration, steering wander, or unusual noise from a wheel area, the wheel hub assembly is a common component to check. Replacing a worn hub assembly restores precise wheel alignment, reduces noise, and prevents further wear to the axle and braking system. This guide outlines the top shortlisted wheel hub assemblies suited to the Accord's suspension and load characteristics, with attention to front and rear fitment where applicable.We evaluated candidate parts for proper fitment to the 2013 through 2017 Accord chassis, bearing durability, and noise characteristics under typical driving loads. Below you will find our top picks and a practical breakdown of the features and specifications to consider when choosing a replacement hub assembly.
Looking for other parts? See all Honda Accord parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Detroit Axle Front Steering Knuckles & Wheel Bearing Hubs Kit (Pair) for 2013–2017 Honda Accord |  |
| Best Quality Built to a higher standard if you want something more solid | AISIN Front Left Steering Knuckle with Wheel Hub Bearing Assembly |  |
| Best Value The sweet spot between price and what you get | PHILTOP Rear Wheel Hub and Bearing Assembly (pair) 512544 |  |
| Best Budget The cheapest option that still gets the job done reliably | ECCPP 512544 Wheel Hub and Bearing Assembly, 5-Lug, Pre-Greased, Sealed |  |
| Highest Rated A top-rated pick with lots of positive feedback | MOOG 512544 Wheel Bearing and Hub Assembly |  |
| Most Popular A crowd favorite that many people choose with confidence | Detroit Axle Rear Wheel Hub and Bearing Assembly (BR930856) |  |
| Best Seller A high-volume bestseller chosen again and again | ApplianPar Front Driver and Passenger Wheel Hub Bearing Assembly for Honda Accord 2013–2017 |  |
1. Detroit Axle Front Steering Knuckles & Wheel Bearing Hubs Kit (Pair) for 2013–2017 Honda Accord
| Fitment | 2013-2017 Honda Accord (specified trims) |
|---|---|
| Kit contents | 2x Front Steering Knuckles & Wheel Bearing Hubs |
| Material | Cast iron knuckles |
This Detroit Axle kit supplies both front steering knuckles and pre-assembled wheel bearing hubs for the Accord model years indicated, so it replaces the knuckle and hub in one go. The assemblies arrive fully assembled, eliminating the need for a press or specialist bearing tools and making installation practical for a capable DIYer or shop. The knuckles are cast iron with an electrocoated backplate and Detroit Axle states the bearings are made from bearing-grade steel, which should improve corrosion resistance and long-term durability in typical road conditions. Functionally the parts are built to meet factory-quality fit, form, and function, so they restore steering stability and wheel support while reducing body shake from worn components. The main trade-offs are that these are aftermarket remanufactured-style parts rather than factory originals and installation still requires basic suspension disassembly and alignment afterward. For someone replacing both knuckles and hubs at once this kit saves time and avoids separate part sourcing, but buyers should plan for proper installation and alignment services.
Best for: Buyers seeking a complete, time-saving front hub and knuckle replacement for a 2013–2017 Accord who value straightforward installation and restored steering stability.
Less Ideal for: Those who prioritize an original factory part number or who want to replace only a single component at a time should consider alternative options.
- Comes as a pair of fully assembled knuckles and hub bearings so no press required
- Cast iron knuckles with electrocoated backplate for improved corrosion resistance
- Designed to meet factory-quality fit, form, and function for direct replacement
- Includes both driver and passenger side parts to replace the full front set at once
- Aftermarket remanufactured-style part rather than a factory original
- Installation still requires suspension disassembly and a wheel alignment service
Verdict: Choose this kit if you want a complete, pre-assembled front knuckle and hub pair that simplifies replacing both sides on a 2013–2017 Accord and restores steering stability quickly.
2. AISIN Front Left Steering Knuckle with Wheel Hub Bearing Assembly
| Position | Front Left |
|---|---|
| Material | Cast Iron |
| Hub Bearing Included | Yes |
| Dust Shield Included | Yes |
| Compatibility | Honda Accord 2013-2017 |
This AISIN assembly combines the steering knuckle and wheel hub bearing into a single, factory-replacement style unit for the front left side of 2013–2017 Honda Accord models. Intended as a direct fit, the cast iron knuckle arrives with the hub bearing and dust shield preinstalled to simplify installation and reduce press-fit work. Typical use is to replace a worn or damaged knuckle/hub when bearings are noisy, wheel play appears, or after collision damage. The included installation manual and plug-and-play fitment cut install time for a competent DIYer or independent shop. Because it is a full assembly, you avoid separate bearing presses and risk of improper seating, though the part is heavier than individual components and requires proper suspension alignment after replacement. This unit focuses on dependable, factory-quality steering geometry and bearing life rather than performance upgrades, so it is best when you want reliable road manners and OEM-like feel rather than lighter weight or sport-tuned components.
Best for: Buyers who need a reliable, factory-quality replacement that restores proper steering geometry and bearing function with minimal installation complexity.
Less Ideal for: Drivers seeking lightweight or performance-enhancing suspension components or custom track-focused upgrades should look at specialty performance parts instead.
- Complete hub and bearing preinstalled for faster, simpler installation
- Cast iron knuckle built to match factory steering geometry
- Includes dust shield to protect bearing from road debris
- Direct replacement fitment for 2013–2017 Honda Accord front left reduces modification or machining needs
- Heavier than separate lightweight or performance-oriented knuckles, so no weight savings
- Not designed as a performance upgrade; no material or design changes to improve track performance
Verdict: Choose this AISIN front-left knuckle assembly when you want a direct-fit, factory-quality replacement that simplifies installation and restores reliable steering and bearing performance.
3. PHILTOP Rear Wheel Hub and Bearing Assembly (pair) 512544
| Bearing Number | 512544 |
|---|---|
| Material Type | 55# Steel and GCr15 Steel |
| Unit Count | 2.0 Count |
| Compatible Lubricant | Grease |
This PHILTOP kit supplies two rear wheel hub and bearing assemblies intended as a direct replacement for worn or noisy rear hubs on compatible Honda Accord and Acura TLX FWD cars. Each assembly integrates the bearing and hub with five wheel studs so installation replaces multiple aging components at once and restores wheel mounting accuracy and ABS tone wheel input where applicable. The hubs are made from bearing-grade steels and ship with installation instructions and factory-style dimensions intended to match the original fit. For routine street driving the parts offer a cost-effective way to remove play, vibration, or noise caused by failed bearings. Expect a straightforward swap when you confirm vehicle fitment and have basic shop tools or a mechanic do the press and torque steps. These are aftermarket units, so buyers should budget for professional installation if they lack a hydraulic press or hub-pull tools and verify bearing/ABS tone ring compatibility during fitment checks.
Best for: Buyers who want a practical, budget-conscious replacement to restore rear wheel stability and eliminate bearing noise on compatible Accord or TLX FWD cars and who prioritize cost and fit accuracy over OEM branding.
Less Ideal for: Drivers seeking a brand-certified factory replacement or those planning to install without access to a press or professional tools should consider alternatives or professional fitting services.
- Sold as a matched pair to replace both rear hubs at once
- Integral hub and bearing design simplifies replacement of multiple worn parts
- Constructed from bearing-grade steel for corrosion resistance and load capacity
- Includes installation instructions to aid correct fitment
- Aftermarket unit may require tool-dependent installation and professional press work
- Fitment must be confirmed by vehicle selection; not universal across other models
Verdict: A cost-effective matched pair of rear hub assemblies that restores wheel stability and replaces both rear bearings for 2013–2015 and 2018–2020 Honda Accord and 2015–2020 Acura TLX FWD vehicles.
4. ECCPP 512544 Wheel Hub and Bearing Assembly, 5-Lug, Pre-Greased, Sealed
| Bearing Number | 512544 |
|---|---|
| Bearing Type | Ball Bearing |
| Unit Count | 1.0 Count |
| Material Type | beaded |
| Compatible Lubricant | Grease |
This ECCPP 512544 wheel hub assembly is a ready-to-install, sealed unit intended as a direct replacement for rear left or right positions on compatible Acura TLX and Honda Accord models. It arrives pre-greased with a high-temperature grease formulation rated to perform from sub-freezing to very hot conditions, so you do not need to repack or service the bearing in normal use. The 5-lug design and sealed construction simplify installation and help keep contaminants out, which is useful for drivers who want a straightforward OEM-style swap. ECCPP backs the unit with a two-year unlimited-mileage warranty and offers short-term technical support for fitment questions. Keep in mind this is an aftermarket part from a third-party brand, so finish and long-term durability can vary compared with factory parts, and you should verify exact fitment for your model year before ordering. For routine street driving and budget repairs it provides a practical, low-cost alternative to dealer replacement.
Best for: Drivers who need an affordable, installation-ready rear wheel hub for a 2013–2017 Accord or compatible TLX and prioritize a low-cost, quick repair over buying dealer parts.
Less Ideal for: Buyers seeking factory-identical finishes, long-term guaranteed longevity, or those who prefer purchasing parts directly from the vehicle manufacturer.
- Pre-greased and sealed for maintenance-free installation
- Wide-temperature grease formulated to resist breakdown from -40°F to 300°F
- Designed as a direct-fit 5-lug replacement for listed Acura and Honda rear-wheel applications
- Two-year unlimited-mileage warranty with US-based technical support
- Aftermarket build quality may differ from factory replacements
Verdict: A budget-friendly, pre-greased sealed rear hub assembly that lets you replace a worn unit quickly without re-lubrication or extra preparation.
5. MOOG 512544 Wheel Bearing and Hub Assembly
| Brand | MOOG |
|---|---|
| Material | Alloy Steel |
| Bearing Number | 512544 |
| Bearing Type | Wheel Bearing |
| Compatible Lubricant | Grease |
The MOOG 512544 is a complete wheel bearing and hub assembly built for direct replacement on specified Honda Accord and Acura TLX years. It comes preassembled with the bearing, quad lip seals, and coated studs so installation is straightforward and you avoid pressing bearings in and out. MOOG highlights a precision roll-form raceway and an application-specific design intended to reduce heat and stress for longer service life, while the quad lip seal and machined exterior help keep water and road debris out. In practice this means quieter operation and fewer premature failures compared with older, worn hubs. The coated wheel studs make future removal and torqueing easier by resisting rust. Expect a typical DIY or shop install to be fast, but confirm vehicle fitment before ordering and plan for ABS sensor removal during replacement. The unit is focused on compatibility and durability rather than cosmetic details, so buyers should not expect extra accessories or installation hardware beyond the hub itself.
Best for: Buyers who prioritize a durable, factory-style replacement that installs quickly and reduces the risk of repeat failures; good for DIYers and technicians who want a ready-to-install hub that focuses on longevity.
Less Ideal for: If you need a universal hub for multiple vehicle makes or are looking for performance-upgrade bearings beyond factory-spec, choose a different, model-specific or performance part.
- Preassembled hub and bearing simplifies replacement and avoids bearing press work
- Quad lip seal design helps keep moisture and debris out for longer life
- Application-specific raceway and roll-form design aim to reduce heat and wear
- Coated wheel studs resist rust to make future removal and torqueing easier
- Compatibility limited to specific Accord and TLX model years so fitment must be verified before purchase
Verdict: Choose the MOOG 512544 when you want a ready-to-install, reliability-focused replacement hub that minimizes rework and helps prevent premature bearing failure.
6. Detroit Axle Rear Wheel Hub and Bearing Assembly (BR930856)
| Position | Rear |
|---|---|
| Lugs | 5 Bolt |
| ABS Type | Encoder |
| Fitment | 2015-2020 Acura TLX (FWD); 2013-2015, 2018-2020 Honda Accord |
This Detroit Axle rear wheel hub and bearing assembly is a ready-to-install replacement for the rear position on compatible Accord and TLX FWD models. It comes as a complete hub with integrated bearing, a 5-lug flange and an ABS encoder so you do not need to press in a separate bearing. The unit is intended for simple swap-ins during routine rear hub replacement and works with the factory 4-bolt square flange and 4.50 in. bolt circle diameter used on the listed vehicles. Detroit Axle highlights high-frequency quenching and premium bearing steel for improved wear and rust resistance, which should increase service life compared with cheaper reman units. Installation is straightforward for a home mechanic with basic tools or a professional installer. Practical limitations are that this is a vehicle-specific aftermarket assembly so fitment must match the listed years, engine types, and FWD configuration, and it does not include wheel studs beyond the hub itself if your application requires different hardware. For buyers focused on dependable, factory-quality replacements backed by broad user feedback, this is a solid option.
Best for: Buyers who prioritize a reliable, ready-to-install factory-style replacement and want a product proven by other users rather than experimenting with unknown brands.
Less Ideal for: People who need a universal hub for multiple vehicles or who require custom or performance-modified hubs; those buyers should look for application-specific or performance parts instead.
- Complete hub-and-bearing assembly with ABS encoder eliminates need to press in a separate bearing
- Manufactured with high-frequency quenching and bearing-grade steel for improved wear and corrosion resistance
- Designed to match factory flange pattern and bolt circle for direct fit on specified vehicles
- Market-tested product with strong user feedback and ratings
- Fitment is vehicle- and configuration-specific so incorrect selection will not work
- Does not include additional hardware such as replacement wheel studs or bolts beyond the assembly
Verdict: A reliable, vehicle-specific rear hub assembly that delivers a factory-style, plug-and-play replacement with strong real-world user confidence.
7. ApplianPar Front Driver and Passenger Wheel Hub Bearing Assembly for Honda Accord 2013–2017
| Fitment | Honda Accord 2013-2017; Acura TLX 2015-2020 |
|---|---|
| Set Name | 2 |
| Bearing Type | Ball Bearing |
| Material Type | Alloy Steel |
| Compatible Lubricant | Grease |
These ApplianPar hub bearing assemblies are a direct-fit replacement intended for the front driver and passenger sides of the 2013–2017 Honda Accord. Sold as a two-piece set, each assembly uses alloy steel ball bearings prepacked for use with grease, and the part number matches common factory replacement references. Installation is the same as a standard hub swap and is suitable for routine repairs when a worn or noisy wheel bearing is diagnosed. Because they are built to match the factory specification listed, they restore wheel mounting, ABS tone ring alignment, and smooth wheel rotation without requiring vehicle modification. Buyers should be prepared to follow torque and installation procedures or have a shop handle the mount to ensure correct preload and ABS sensor function. This product focuses on basic, reliable replacement rather than performance upgrades, so drivers seeking heavy-duty or high-mileage aftermarket upgrades may look elsewhere.
Best for: A risk-conscious buyer who wants a straightforward, factory-matching replacement to stop noise or play in the front hubs and return the car to normal driving behavior.
Less Ideal for: Drivers seeking upgraded durability for towing, track use, or extended high-mileage service should consider heavy-duty or performance-specific hub assemblies instead.
- Direct-fit design for front left and right positions on specified Accord years
- Includes a pair for replacing both sides at once
- Alloy steel construction with grease-compatible bearings for typical road use
- Matches the listed factory part number for straightforward replacement
- Not marketed as a heavy-duty or performance upgrade compared with premium aftermarket hubs
Verdict: A factory-matching, two-piece front hub assembly set that provides a dependable, direct-fit replacement to restore normal wheel operation on 2013–2017 Honda Accords.
Choosing the Right 2013-2017 Honda Accord Wheel Hub Assembly: Key Factors to Consider
Fitment and Compatibility
Correct fitment is the first priority because the Accord's steering knuckle, axle spline, and ABS tone ring must align precisely. A hub that does not match the factory bolt pattern or tone ring position can cause ABS faults, wheel vibration, and uneven tire wear. Always confirm the hub references the 2013-2017 Accord chassis and any model-specific differences across those years.
Compatibility also includes whether the assembly is intended for front or rear installation. Front wheel hub assemblies often accommodate drive axle splines or steering-related loads and may have different sealing and preload requirements than rear hubs. Selecting the correct location-specific hub ensures proper load distribution and avoids premature bearing failure.
Bearing Design and Sealing
The bearing type and internal preload determine how the hub handles radial and axial loads from cornering, braking, and bumps. Look for assemblies with well-specified bearing preload and a robust internal design rather than generic, underspecified bearings. Bearings with higher quality race finishing and precise tolerances typically run cooler and last longer.
Effective sealing is equally important. Seals that keep grease in and contaminants out extend service life, especially in regions with road salt or heavy rain. Evaluate the seal arrangement and whether the bearing uses single or double lip seals, as this impacts resistance to water ingress and road grime.
Durability and Corrosion Resistance
Hubs are exposed to the elements and road chemicals, so finishes and materials matter. Corrosion-resistant coatings on the hub flange and studs reduce the risk of seized nuts or stud corrosion that complicates future maintenance. Hardened or treated wheel studs resist stretching and galling during wheel installation.
Durability also covers the hub's capability to withstand repeated loading cycles without developing noise or play. Look for assemblies with heat-treated races and studs, and protective coatings on machined surfaces. A more durable hub reduces the chance of repeat replacement within a few years.
Noise, Vibration, and Harshness (NVH) Control
Wheel hub assemblies influence NVH characteristics felt at the steering wheel and cabin. Bearings with consistent preload and properly machined mounting surfaces minimize humming, grinding, or rumbling that can develop as wear progresses. Some assemblies include pre-pressed bearings with optimized internal tolerances that reduce early-life noise.
NVH performance affects driver confidence because persistent noise or vibration can mask other faults and lead to unnecessary diagnostic work. Prioritize hubs that specify noise reduction features or have documentation showing tight runout and balanced construction.
ABS Tone Ring and Sensor Compatibility
Many 2013-2017 Accord models use wheel speed sensors that rely on a tone ring integrated into the hub. The tone ring position and tooth profile must match the vehicle's sensor to avoid ABS or traction control warnings. Replacing a hub without the correct tone ring alignment can trigger system faults even if mechanical fitment is correct.
If the replacement hub does not include a tone ring, ensure the original ring can be transferred intact and that the replacement hub provides exact mounting points. Confirm whether the hub is sold as a sensor-ready assembly for the Accord years covered to simplify installation.
Serviceability and Installation Requirements
Consider how the hub installs on the Accord's knuckle and whether special tools are needed. Some assemblies are direct-replacement units that bolt to the knuckle and reuse factory hardware, while others require pressing the old bearing out or replacing additional components. Choosing a hub that matches factory installation steps reduces labor time and the risk of installation errors.
Also check torque specifications, recommended fastener practices, and whether the assembly allows reuse of original axle nuts or requires a new spindle nut. Good documentation that accompanies the part simplifies correct torquing and final checks during installation.
Identifying Wheel Hub Symptoms on the 2013-2017 Accord
Early recognition of hub-related symptoms helps prevent collateral damage to tires, brakes, and axles. Common signs include a growling or humming noise that changes with vehicle speed, increased play in the wheel when rocked by hand, or a loose feeling in steering at certain speeds. These symptoms usually progress slowly, so checking for them during routine tire rotation or brake service can catch issues before failure.
Some owners experience irregular ABS or traction control lights when a tone ring has shifted or a sensor loses accurate wheel speed readings. Grinding noises under load or a distinct change in noise when turning left or right are strong indicators of a failing hub bearing. Conducting a quick road and hands-on inspection narrows down whether the hub assembly is the likely culprit.
- Humming or rumbling that varies with speed
- Play or looseness when the wheel is rocked back and forth
- ABS or traction control alerts without other obvious faults
- Noise that changes when turning left versus right
Front Vs Rear Hub Considerations for Accord Owners
Front and rear hubs face different loads. Front hubs absorb steering inputs, braking torque, and possibly drive torque on equipped models. They therefore often require bearings with higher axial load capacity and may include provisions for integrated tone rings. Rear hubs typically handle fewer steering-related forces but still contend with braking and vertical loads.
When selecting a hub, verify the unit is specified for the front or rear position. Installation steps and torque specs can differ between locations, and mixing them up can cause premature wear or handling issues. Buying the correct location-specific hub reduces the chance of incorrect installation and assures proper vehicle dynamics after replacement.
- Front hubs handle steering and braking loads
- Rear hubs often have simpler bearing requirements
- Confirm front or rear specification before purchase
Torque Specs and Fastener Best Practices
Correct torque on hub mounting bolts, axle nuts, and wheel lug nuts is essential for bearing life and safe operation. Under-torquing can allow movement that accelerates wear, while over-torquing may preload the bearing incorrectly or stress studs. Use a calibrated torque wrench and follow the manufacturer-specified values for the 2013-2017 Accord when installing hubs and wheels.
When reinstalling hardware, observe thread condition and replace any damaged studs or nuts. Use proper anti-seize or thread locker as recommended for the vehicle's service manual and torque the fasteners in the correct sequence to ensure even clamp load across the hub flange.
- Always use a calibrated torque wrench
- Replace damaged studs or nuts before final torque
- Follow the specified torque sequence for the hub flange
Maintenance and Longevity Tips
Regular inspections during tire rotations or brake service can extend the life of a hub assembly. Check for grease leakage, visible seal damage, and wheel play. Addressing small leaks or replacing a marginal hub early prevents damage to the axle and knuckle.
Avoid high-pressure wash directly on hub seals and avoid aggressive curb impacts. Clean and lightly grease exposed studs during service to minimize corrosion. Keeping brake components in good condition reduces contamination and uneven loading on the hub bearing, helping it reach expected service life.
- Inspect seals and wheel play during routine services
- Protect seals from high-pressure washing and impacts
- Keep studs clean to prevent corrosion and difficult removal
Common Installation Pitfalls to Avoid
A frequent mistake is attempting to reuse a hub that has visible play or noise. Press-fit bearings are delicate, and reusing questionable components often leads to early failure. Another pitfall is improper torqueing of the axle nut or hub bolts, which can either loosen over time or overstress the bearing.
Failing to transfer or align the ABS tone ring correctly will cause sensor errors and unpredictable vehicle stability system behavior. Finally, do not neglect to inspect adjacent suspension and brake parts; worn control arm bushings or loose caliper hardware can mimic hub symptoms and should be addressed concurrently.
- Do not reuse hubs with play or noise
- Follow axle nut and hub bolt torque specs precisely
- Ensure ABS tone ring is correctly aligned and installed
Still looking for the perfect fit?
Select your Honda Accord configuration to see the most relevant Wheel Hub Assemblies recommendations
How We Chose the Best 2013-2017 Honda Accord Wheel Hub Assembly
We selected wheel hub assemblies based on a mix of fitment accuracy, bearing design, corrosion resistance, and serviceability. Priority went to units that match the 2013-2017 Honda Accord wheel bearings and bolt pattern to ensure proper alignment and ABS tone ring positioning where required. Bearing design and grease sealing were evaluated for expected service life under normal commuting and occasional highway driving. Corrosion protection and finish treatments were considered because the hub face and studs are exposed to road salt and moisture, which affects longevity and removal at future service.We also assessed noise and vibration control features, such as pre-loaded bearings and quality hub machining, which reduce grinding or humming sensations as mileage increases. Ease of installation was judged by how many original fasteners and press-fit operations are needed, and whether the hub allows reuse of the factory knuckle and suspension hardware. Exclusions included units lacking clear fitment data for the 2013-2017 Accord or those that required unspecified machine work to install. The final list emphasizes direct-fit assemblies that balance long-term durability with straightforward installation.
Our full evaluation process is outlined in our review methodology.
FAQ
How long does a wheel hub assembly typically last on a 2013-2017 Accord?
Service life often depends on driving conditions, but many hub assemblies last well over 60,000 miles under normal use. Exposure to road salt, heavy loads, or frequent short trips can shorten lifespan, so inspect hubs during regular maintenance.
Can I replace just the bearing in the hub or should I change the whole assembly?
While bearings can sometimes be pressed out and replaced, full assemblies reduce labor and alignment risk because they arrive as a complete unit. For the Accord, a direct-fit assembly simplifies installation and ensures correct bearing preload and seal condition.
What noise indicates a failing wheel hub on this Accord generation?
A humming, growling, or grinding noise that increases with vehicle speed is typical. If the noise changes when turning left or right, it often points to a wheel bearing within the hub beginning to fail.
Will a bad wheel hub affect ABS or traction control on my Accord?
Yes. If the hub's ABS tone ring or sensor alignment is compromised, wheel speed readings can be incorrect and trigger ABS or traction control warnings. Ensuring the replacement hub matches the tone ring configuration avoids these issues.
Are there special tools needed to replace the wheel hub assembly on a 2013-2017 Accord?
Basic automotive tools and a torque wrench are required, and some jobs may need a press or slide-hammer if the old bearing is stubborn. Direct-fit assemblies that bolt to the knuckle reduce the need for heavy pressing equipment.
How can I check for wheel hub play on my Accord?
Safely lift and support the vehicle, then grasp the tire at 12 and 6 o'clock and rock it. Any noticeable free play or clunk usually indicates hub or bearing wear. Also listen for noises while rotating the wheel by hand.
Final Verdict
When selecting a wheel hub assembly for a 2013-2017 Honda Accord, prioritize proper fitment for front or rear application, bearing design, and seal quality. These factors most directly affect NVH, ABS compatibility, and longevity. Tradeoffs usually involve ease of installation versus the perceived robustness of the bearing and corrosion protection.Focus on direct-fit assemblies that match the Accord's tone ring and bolt pattern, use correct fastener torque, and follow installation best practices. Doing so provides reliable steering feedback, reduces noise, and minimizes repeat service, helping you get the best long-term value from a wheel hub replacement.
Explore More:
- Check out all Honda Accord parts & accessories
- Explore Wheel Hub Assemblies Maintenance & Repair Guides
- Explore Wheels & Tires
- Browse all Auto Parts
