Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Accord is showing vibration through the steering, uneven tire wear, or a humming noise from the rear, the rear wheel hub assembly is a likely culprit. Choosing the right Honda Accord rear wheel hub assembly matters because fitment, bearing quality, and serviceability directly affect road noise, wheel alignment, and vehicle control.This guide shortlists six top rear assemblies chosen for durability, accurate fitment, and straightforward installation for the Accord. Below you will find practical guidance on what makes a reliable hub assembly, the tradeoffs to expect, and the specific criteria we used to evaluate each option before the product list.
Looking for other parts? See all Honda Accord parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Detroit Axle Rear Wheel Bearing and Hub Assembly, pair (5‑lug) |  |
| Best Quality Built to a higher standard if you want something more solid | TRQ Rear Wheel Bearing and Hub Assembly Set (2-piece) |  |
| Best Value The sweet spot between price and what you get | PHILTOP Rear Wheel Hub and Bearing Assembly (Pair) 512544 |  |
| Best Budget The cheapest option that still gets the job done reliably | A-Premium Rear Wheel Bearing and Hub Assembly, 5-Lug |  |
| Highest Rated A top-rated pick with lots of positive feedback | Detroit Axle Rear Wheel Hub and Bearing Assembly (BR930856) |  |
| Most Popular A crowd favorite that many people choose with confidence | Detroit Axle Rear Wheel Bearing and Hub Assembly (5-Lug) for Honda Accord 2008–2012 / Acura TSX 2009–2014 |  |
1. Detroit Axle Rear Wheel Bearing and Hub Assembly, pair (5‑lug)
| Compatible Position | Rear Left and Right |
|---|---|
| Lug Count | 5 Bolt |
| ABS Type | Encoder |
| Material Type | Alloy Steel |
| Unit Count | 2.0 Count |
These Detroit Axle rear wheel bearing and hub assemblies replace the rear left and right hubs on compatible Accord and TLX models and are supplied as a two-piece kit. They arrive preassembled with the bearing, flange, and ABS encoder integrated, so installation is similar to swapping a factory hub and typically requires basic mechanic tools and standard hub removal steps. Built from alloy steel and described as original equipment style, the assemblies are intended for routine replacement after wear or failure and are suitable for street driving and everyday loads. Buyers will appreciate the 5-lug fitment, encoder for ABS compatibility, and the included pair for doing both sides at once. Expect a straightforward install and quiet operation when properly cleaned and fitted. These are aftermarket parts rather than factory-brand units, so longevity may vary compared with OEM hubs and some users recommend preparing the hub bore before installation to ensure a snug, rust-free fit.
Best for: Buyers who want a balanced, cost-conscious replacement that fits like the factory hub and keeps daily driving reliable without overspending on branded OEM parts.
Less Ideal for: Drivers seeking the absolute longest-lasting, factory-branded replacement or those who need heavy-duty or performance-specific hubs should consider other options.
- Sold as a matched pair so both rear hubs can be serviced at once
- Factory-style construction with alloy steel and integrated ABS encoder
- Preassembled hub and bearing reduces install time compared with separate components
- Multiple customer reports of good fit and quiet operation after installation
- Aftermarket unit so long-term durability may be shorter than factory-brand hubs
Verdict: A practical, factory-style pair of rear hub assemblies that lets you replace both sides quickly while keeping costs down.
2. TRQ Rear Wheel Bearing and Hub Assembly Set (2-piece)
| Included Components | 2 Piece Wheel Bearing & Hub Assembly Set |
|---|---|
| Material Type | Alloy Steel |
| Bearing Type | Ball Bearing |
| Warranty Description | 2 years |
This TRQ kit provides two rear wheel bearing and hub assemblies intended as direct-fit replacements for the specified Honda Accord and Acura TSX rear positions. It installs like a factory replacement and is typically used to restore rear wheel stability, eliminate bearing noise, and correct wheel play that affects handling. The assemblies are alloy steel with ball bearings and come as a two-piece set covering driver and passenger sides, and TRQ supplies installation videos to simplify DIY or shop installs. In practice the kit reduces vibration and helps return consistent wheel alignment under load, which matters for drivers chasing a tighter, more controlled rear end. The parts carry a two year warranty and meet factory-spec performance claims, but buyers should confirm vehicle fitment with the vehicle compatibility chart before ordering and expect professional press or torque tools for proper installation rather than a basic socket-only job.
Best for: Drivers focused on restoring or improving rear-end stability and steering feel who prefer a direct-fit, factory-quality replacement and are comfortable with a workshop or competent DIY installation process.
Less Ideal for: People who need a universal or multi-vehicle hub solution or those without access to a press or a mechanic for correct installation.
- Direct-fit replacement for the listed Honda Accord and Acura TSX rear positions
- Alloy steel construction with ball bearing design for durability and smooth rotation
- Includes both driver and passenger rear assemblies so both sides can be serviced at once
- Manufacturer provides step-by-step installation videos to aid DIYers
- Installation requires proper press tools or a shop for reliable seating and torque, not ideal for basic home toolkits
Verdict: Choose this TRQ rear hub and bearing kit when you want a direct-fit, factory-quality replacement to restore rear stability and handling on the specified Honda Accord and Acura TSX models.
3. PHILTOP Rear Wheel Hub and Bearing Assembly (Pair) 512544
| Bearing Number | 512544 |
|---|---|
| Bearing Type | Ball Bearing |
| Material Type | 55# Steel and GCr15 Steel |
| Unit Count | 2.0 Count |
This PHILTOP rear wheel hub and bearing assembly is a direct-fit replacement intended for the rear of specified Honda Accord and Acura TLX FWD years. It combines a steel hub with a GCr15 steel ball bearing and ships as a pair with basic installation instructions. In use it restores wheel centering and bearing function so you can remove play, stop grinding noises, and reestablish a secure wheel mounting surface. The listed bolt circle, pilot and flange dimensions show it is meant to match factory mounting points, and the assemblies come preassembled to speed installation. Built from hardened bearing steel and specified to use grease, these hubs aim for long service life and corrosion resistance. Expect a straightforward swap for a technician or a competent DIYer, though wheel bearing installation still requires proper torque, press or hub removal tools and verification of ABS tone ring fit where applicable. There is a two-year parts guarantee limited to the item cost but no labor coverage.
Best for: Buyers who want a practical, factory-style replacement to restore rear wheel stability and eliminate bearing noise without overpaying, and who are comfortable having a shop or experienced DIYer perform the install.
Less Ideal for: People seeking upgraded performance hubs, hub units with longer manufacturer-backed warranties, or those who need coverage for installation and labor costs.
- Sold as a pair with installation instructions for rear axle replacement
- Constructed from 55# steel and GCr15 bearing steel for corrosion resistance
- Preassembled hub and bearing format simplifies replacement and reduces shop time
- Includes matching bolt circle and pilot diameters to fit listed vehicle mounting points
- Two-year guarantee covers only the part cost and excludes labor or related expenses
Verdict: A cost-conscious, factory-fit replacement pair that restores rear wheel fitment and bearing function for the specified Honda Accord and Acura TLX FWD models.
4. A-Premium Rear Wheel Bearing and Hub Assembly, 5-Lug
| Fitment | Honda Accord 2008-2012, Acura TSX 2009-2014 |
|---|---|
| Wheel Studs | 5-Lug |
| Pre-Greased | Yes |
| Material Type | GCr15 Steel and 65Mn Steel |
| Position | Rear Left or Right Side |
This A-Premium rear wheel hub assembly replaces the rear left or right hub and bearing with a pre-greased, ready-to-install unit. It is designed for routine street use and restores a rusted or noisy hub by supplying a new bearing cage, seals, and wheel studs sized to match factory fitment. Installation is typical for hub assemblies: remove the old unit, transfer any reusable parts as needed, and torque the new hub to factory specifications. The assembly does not include a speed sensor and is intended for vehicles that do not require one. Materials are listed as GCr15 and 65Mn steels, and the unit ships pre-lubricated, which reduces initial service steps. Practical benefits include straightforward replacement of worn hubs and a one-year unlimited-mileage parts guarantee. Expect this to serve well for budget repairs, though buyers should verify exact fitment against the vehicle reference numbers before ordering and plan for professional installation if not comfortable with wheel-bearing service.
Best for: Buyers looking for an economical, ready-to-install rear hub replacement to repair noise, vibration, or grease-leak issues on affected Accords or TSX models and who prioritize cost-effective parts over premium branded units.
Less Ideal for: Drivers who need a hub with an integrated ABS speed sensor or who prefer OEM-branded replacement parts and vendor-backed installation support should consider other options.
- Pre-greased, integrated hub and ball bearing for simpler replacement
- Wheel studs match factory 5-lug configuration for direct rotor and wheel fitment
- Constructed from hardened steels intended for standard driving loads
- Includes sealing components and bearing cage to address common failure modes
- Backed by a one-year unlimited-mileage parts guarantee
- Does not include a wheel speed sensor so not suitable if your vehicle requires an integrated sensor
Verdict: A cost-conscious, pre-greased rear hub assembly that restores worn bearings and wheel studs for specified Accord and TSX years, making it a practical choice for budget repairs.
5. Detroit Axle Rear Wheel Hub and Bearing Assembly (BR930856)
| Position | Rear |
|---|---|
| Lugs | 5 Bolt |
| ABS Type | Encoder |
| Flange Type | 4-Bolt Square |
| Manufacturer Part Number | BR930856 |
This Detroit Axle rear wheel hub and bearing assembly replaces the rear hub on select 2013–2020 Honda Accord and 2015–2020 Acura TLX FWD models. It arrives as a complete hub-and-bearing unit with a 5-bolt lug pattern and an ABS encoder built in, so installation typically means swapping the old assembly for this one without pressing bearings. The listing emphasizes high-frequency quenching and premium bearing steel for improved wear and corrosion resistance, which matters for long-term reliability and consistent wheel alignment. In use the part functions as a factory-style replacement for a failed or noisy bearing, restoring steering feel and preventing ABS faults tied to the encoder. Expect straightforward bolt-on installation for mechanically competent DIYers or a quick shop job. Limitations are that fitment is specific to the listed Accord and TLX engines and years, and you must confirm bolt circle and ABS type before ordering; this is a single-side hub so you may need two if both sides require service.
Best for: Buyers who prioritize long-term, dependable replacement parts and want a factory-style hub assembly that restores wheel bearing performance with minimal fuss.
Less Ideal for: Drivers who need a multi-vehicle universal hub solution or who are unsure about bolt circle and ABS sensor compatibility should look for alternatives or verify fitment first.
- Complete hub-and-bearing assembly simplifies replacement and eliminates bearing press work
- Built-in ABS encoder keeps wheel speed sensing integrated for vehicles with ABS
- Manufacturer describes heat-treated premium bearing steel for improved wear and corrosion resistance
- 5-bolt flange and matching bolt circle provided for direct fit on listed models
- Fitment limited to the specific Accord and TLX model years and bolt circle sizes listed
Verdict: Choose this Detroit Axle rear hub assembly when you need a direct factory-style replacement that restores wheel bearing reliability and ABS function for the specified Accord and TLX models.
6. Detroit Axle Rear Wheel Bearing and Hub Assembly (5-Lug) for Honda Accord 2008–2012 / Acura TSX 2009–2014
| Bearing Number | 512353 |
|---|---|
| Bearing Type | Ball Bearing |
| Included Components | Wheel Bearing and Hub Assembly |
| Material Type | Alloy Steel |
| Compatible Lubricant | Grease |
This Detroit Axle rear wheel hub assembly replaces the bearing and hub as a single unit for 2008–2012 Honda Accord and 2009–2014 Acura TSX with 5-lug rear hubs. It ships as a complete bolt-on assembly with studs pressed in plus an ABS encoder and wiring/retainer clips so you can swap it in without pressing bearings. Typical use is to eliminate humming, play, or ABS faults caused by a worn rear bearing. The unit is alloy steel, comes pre-greased, and Detroit Axle reports impact and fatigue testing along with a long spare-part availability window. Most buyers will appreciate the straightforward install and included ABS pigtail that avoids extra wiring work. Caveats: aftermarket quality varies by application and some users report premature play on high-mileage installs, so double-check fitment and inspect mounting points during installation. If you prefer fully remanufactured factory units, consider that this is an aftermarket option rather than a factory-sourced reman.
Best for: Buyers who want a ready-to-install replacement to stop rear hub noise or ABS faults quickly and who value visible user reviews and proven fit for the specified Accord/TSX years.
Less Ideal for: If you prioritize an OEM-refurbished hub or need guaranteed factory-identical longevity, this aftermarket assembly may not meet those expectations.
- Complete bolt-on assembly with studs, ABS encoder and wiring included for faster installation
- Made from alloy steel and pre-packed with grease for immediate service after install
- Designed specifically for listed Accord and TSX model years to reduce fitment guesswork
- Undergoes impact and fatigue testing and has long spare-part availability
- Some reports of premature play on certain vehicles, indicating variable long-term durability
- Aftermarket design differences may require careful verification of mounting pattern before ordering
Verdict: A practical, ready-to-install aftermarket rear hub assembly for 2008–2012 Honda Accord and 2009–2014 Acura TSX that speeds repairs by including studs and ABS hardware.
Choosing the Right Honda Accord Rear Wheel Hub Assembly: Key Factors to Consider
Fitment Accuracy
Correct fitment is essential because the rear hub assembly must align precisely with the Accord's hub flange, axle splines, and wheel studs. Misalignment can cause abnormal tire wear, wheel vibration, and uneven brake loading.
Look for assemblies that reference exact Accord chassis and trim fitment in their documentation and include an ABS tone ring where applicable. Fitment that requires machining or adapter plates increases installation complexity and risk, so prioritize direct-replacement assemblies that match factory mounting interfaces.
Bearing Design and Durability
The internal bearing design and the materials used determine how well the assembly handles radial and axial loads over time. High-quality rollers, hardened races, and precision preloads reduce the chance of premature wear and lower the chance of noise or roughness developing.
Durability also depends on proper seals and grease retention. Assemblies with robust seals keep contaminants out and grease in, extending service life, especially if you drive in wet or salty conditions.
ABS Tone Ring and Sensor Compatibility
Many Honda Accord models use an ABS sensor that reads a tone ring integrated into the hub. Tone ring alignment and tooth profile must match the sensor to prevent false wheel speed readings, ABS faults, or traction control issues.
Confirm the assembly supports the Accord's ABS configuration and that the tone ring is correctly positioned. An incorrectly matched tone ring can trigger dashboard warnings and require additional troubleshooting even if the bearing itself functions correctly.
Sealing and Corrosion Resistance
Seals protect the bearing from water, road grime, and salt while retaining lubricant. Poor sealing leads to contamination, accelerated wear, and early failure. Materials and coatings on the hub body and studs also affect long-term resistance to rust and galling.
For Accords driven in regions with winter salt or high humidity, choose assemblies with advanced seals and corrosion-resistant finishes on the hub and mounting surfaces to reduce the chance of seizure and simplify future servicing.
Installation and Included Hardware
Ease of installation affects labor time and the likelihood of installation errors. Assemblies that include new mounting nuts, washers, and wheel studs eliminate the need to reuse worn components and ensure correct torque application.
Clear installation guidance and torque specs reduce the risk of over- or under-torquing. Also consider whether the assembly allows retaining the parking brake and brake hardware without modification to preserve brake system integrity during replacement.
Noise, Vibration, and Harshness Performance
NVH characteristics are a major reason owners replace rear hub assemblies. Bearing preload, internal tolerances, and seal drag influence humming, grinding, or rumbling noises that vary with speed and load. An assembly built to tighter tolerances typically produces less noise and smoother operation.
Assess noise performance through manufacturer-supplied vibration ratings or documented service life expectations. Reducing NVH also helps preserve cabin comfort and can mask developing issues earlier, prompting timely maintenance before safety is affected.
Common Symptoms Of Rear Hub Issues On The Accord
Several telltale signs point to a failing rear wheel hub assembly on a Honda Accord. Typical symptoms include a constant humming or growling noise that changes with vehicle speed, vibration felt through the steering wheel or floor, and uneven tire wear concentrated on the rear edges.
You may also notice ABS warning lights or intermittent traction control faults if the ABS tone ring is damaged or misaligned. In advanced cases, play in the wheel bearing produces looseness at the wheel that affects braking feel and cornering stability.
- Humming or grinding noises that vary with speed
- Vibration or looseness at the rear wheel
- ABS or traction control warnings tied to wheel speed sensors
- Uneven rear tire wear or sudden tire cupping
How Proper Torque Specs Affect Hub Performance
Applying the correct torque when mounting the hub and wheel nuts is critical. Under-torquing can allow movement that accelerates bearing wear and creates noise, while over-torquing can preload or distort bearing components and shorten service life.
Torque values for the hub and axle nut should match the vehicle specifications. When performing installation, use a calibrated torque wrench and follow the prescribed sequence to maintain even clamp loads and prevent stress concentrations that lead to premature failure.
- Always use a calibrated torque wrench
- Tighten hardware in the manufacturer-recommended sequence
- Replace any stretched or damaged fasteners rather than reusing them
Tools And Preparation For Replacing A Rear Hub Assembly
Preparing properly for the job reduces install time and avoids surprises. Typical tools include a quality torque wrench, impact or breaker for stubborn fasteners, a hub puller if the old assembly is seized, and a dial indicator to check runout if needed.
Clean mating surfaces and inspect the axle splines and wheel studs before installing the new assembly. If the ABS sensor or wiring shows damage, address that before final assembly to avoid false faults after replacement.
- Torque wrench and breaker/impact tools
- Hub puller and penetrating lubricant
- Cleaning brushes and anti-seize for stud threads
Preventive Maintenance To Extend Hub Life
Regular inspections during tire rotations or brake service can catch early signs of hub wear. Check for play by lifting the rear wheel and oscillating it by hand; any noticeable movement or noise suggests bearing wear.
Avoid driving through deep water or areas with heavy road salt when possible, and address any grooves or damage to wheel studs promptly. Scheduled inspections and prompt replacement at the first signs of failure reduce the risk of secondary damage to brakes or suspension components.
- Inspect wheel play during routine service
- Keep hub and mounting surfaces free of heavy corrosion
- Replace assemblies at first sign of persistent noise or ABS faults
Fitment Notes Specific To Different Accord Configurations
Honda Accord trim and axle configurations may affect whether an assembly includes an integrated ABS tone ring or specific wheel stud patterns. Confirm the assembly documentation lists compatibility with your exact Accord configuration before purchase.
Some assemblies are built for fully assembled plug-and-play replacement while others assume reuse of certain factory components. Double-check whether the unit includes wheel studs and hardware to avoid additional parts during installation.
- Verify ABS tone ring inclusion for your trim
- Confirm wheel stud count and thread pitch match the vehicle
- Check whether parking brake components interface with the hub design
Still looking for the perfect fit?
Select your Honda Accord configuration to see the most relevant Wheel Hub Assemblies recommendations
How We Chose the Best Honda Accord Rear Wheel Hub Assembly
We selected rear wheel hub assemblies for the Honda Accord by focusing on criteria that influence long-term performance and installation reliability. Key evaluation points included bearing design and preload specifications to assess durability under the vehicle's expected loads, and fitment accuracy against manufacturer mounting points and ABS tone ring alignment to ensure plug-and-play installation and correct wheel speed sensor operation.We also considered corrosion resistance and sealing to judge how well the assembly withstands road salt and moisture, plus bearing preload tolerances and noise ratings to estimate NVH characteristics. Ease of service and included hardware were evaluated to reduce installation time and potential for technician error. Finally, we reviewed available warranty coverage and manufacturing traceability as indicators of quality control.Excluded from the shortlist were units that required hub machining, custom modification, or non-standard wheel bearing preloads that deviate from Honda Accord specifications. We avoided options with unclear fitment documentation or missing ABS tone ring compatibility. The resulting list prioritizes assemblies that match factory torque and mounting interfaces while offering reliable bearing performance and corrosion protection.
Our full evaluation process is outlined in our review methodology.
FAQ
How can I tell if the rear wheel hub assembly needs replacing?
Listen for humming, growling, or grinding noises that change with vehicle speed and feel for play at the wheel by rocking it side to side. ABS or traction control warnings related to a wheel sensor can also indicate a damaged tone ring or hub.
Is it safe to drive with a failing rear hub assembly?
Driving with a worn hub can increase vibration, reduce braking stability, and lead to sudden bearing failure. It is usually advisable to limit driving and arrange replacement promptly to avoid damage to brakes or suspension components.
Can I replace the rear hub assembly myself?
Owners with moderate mechanical skill can replace a rear hub if they have the right tools, such as a torque wrench and hub puller. Follow proper torque specs and ensure ABS tone ring alignment; otherwise, consider professional installation.
Will a noisy hub always show an ABS warning light?
Not always. Noise can result from bearing wear without affecting the ABS tone ring or sensor. Conversely, tone ring damage may trigger a warning even if the bearing noise is minimal. Inspect both the mechanical bearing and the tone ring when diagnosing.
Do I need to replace wheel studs when installing a new hub?
It depends on their condition. Replace studs that show thread damage, corrosion, or stretch. Some replacement hubs include new studs and mounting hardware, which simplifies installation and ensures correct torqueing.
How long should a rear wheel hub assembly last on an Accord?
Service life varies with driving conditions and maintenance. Under normal conditions a quality assembly often lasts many tens of thousands of miles, but exposure to moisture, road salt, or heavy loads can shorten life and lead to earlier replacement.
Final Verdict
When selecting a rear wheel hub assembly for a Honda Accord, prioritize accurate fitment, proper ABS tone ring compatibility, and durable bearing design. Good sealing and corrosion-resistant finishes reduce the chance of early failure, while correct torqueing and included hardware simplify installation.Balance NVH performance against long-term durability based on your driving conditions. If you need predictable service life and quiet operation, choose assemblies that match factory mounting interfaces and specify robust seals and bearing preloads to ensure confident, long-lasting results.
Explore More:
- Check out all Honda Accord parts & accessories
- Explore Wheel Hub Assemblies Maintenance & Repair Guides
- Explore Wheels & Tires
- Browse all Auto Parts
