Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If you drive a Chevrolet Impala, the condition of your oil cooler lines matters for engine health and reliability. Worn, cracked, or leaking lines can reduce cooling efficiency and lead to higher oil temperatures, which stresses engine components and can shorten service intervals. This guide presents the top shortlisted oil cooler lines for the Chevrolet Impala, selected for fitment, construction, and leak resistance. We evaluated routing compatibility, connection fittings, and material durability to help you pick the right solution. Read on to see the top options and what to check before you replace your lines.
Looking for other parts? See all Chevrolet Impala parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | A-Premium Inlet Engine Oil Cooler Line Hose Assembly for Chevrolet Impala 2006–2011 3.9L |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium Engine Oil Cooler Line Hose Assembly |  |
| Best Budget The cheapest option that still gets the job done reliably | V VELAMEIS Transmission Cooler Line Quick Connector (2-pack) |  |
| Most Sold A high-volume bestseller chosen again and again | Generic 70" Stainless Steel Braided Transmission Cooler Hose Kit (6AN) |  |
| Best Value for Money The sweet spot between price and what you get | Generic 52" Stainless Steel Braided AN6 Transmission Cooler Line Kit |  |
| Best Overall The best all-around choice for most situations | DOVOSO Oil Cooler Hose Assembly for Cadillac Escalade / Chevrolet Silverado & Tahoe (Replace Part 20828695) |  |
1. A-Premium Inlet Engine Oil Cooler Line Hose Assembly for Chevrolet Impala 2006–2011 3.9L
| Fitment | Chevrolet Impala 2006-2011 V6 3.9L (Inlet) |
|---|---|
| Material | Steel |
| Fitment Type | Direct Replacement |
| Reference Numbers | 625-664, 5801113, 19129789 |
This inlet oil cooler line is a direct-replacement steel assembly intended to replace the factory line on Chevrolet Impala 2006–2011 3.9L V6 models. It connects the engine to the oil cooler to maintain proper oil flow and cooling; installation is typical for under-hood or underbody oil line swaps and should match factory routing. Notable features include corrosion-resistant steel construction and factory-fit reference numbers that simplify matching to the original part. In practice the line provides a robust, leak-resistant path for engine oil and is sized and shaped for direct fitment to the specified Impala application. Limitations are that fitment is specific to the listed model and engine only and an exact match should be confirmed before ordering, and the part is a single line so any additional seals or clamps from the original assembly may need to be reused or replaced separately. A one-year unlimited-mileage guarantee is offered by the brand for added confidence.
Best for: Buyers focused on reliability who prioritize restoring factory-level oil circulation on a Chevrolet Impala 2006–2011 3.9L V6 and prefer a straightforward, durable replacement part.
Less Ideal for: Drivers who need a universal or multi-vehicle solution or those replacing an entire cooler assembly including extra fittings and brackets should consider other options.
- Direct-replacement fitment for Chevrolet Impala 2006–2011 3.9L V6 which simplifies installation
- Steel construction offers improved resistance to corrosion and potential cracking versus softer materials
- Matches common OEM reference numbers to help ensure correct part selection
- Backed by a one-year unlimited-mileage guarantee from the manufacturer
- Only the inlet line is supplied so associated fittings or clamps from the original assembly may need to be sourced separately
- Fitment is limited to the specified model and engine, not universal
Verdict A sturdy, direct-replacement steel inlet line made for Impala 2006–2011 3.9L owners who want a reliable, factory-style oil cooler connection.
2. A-Premium Engine Oil Cooler Line Hose Assembly
| Material | Steel |
|---|---|
| Fitment Type | Direct Replacement |
| Reference Numbers | 625-300, 5801296, 10398398, 15808245, 625300 |
This engine oil cooler line replaces the factory oil cooler feed and return lines and is intended for direct-fit installation on compatible Chevrolet Express and GMC Savana V8 models. Constructed from steel with corrosion-resistant treatment, the line routes engine oil to and from the cooler to help maintain oil temperature under load. Typical use is a like-for-like replacement when a factory line corrodes, leaks, or is mechanically damaged. The product lists multiple factory reference numbers for fit checks and is sold as a complete assembled hose line to simplify installation. Practical benefits include a ready-to-install replacement, rust-resistant construction, and coverage backed by the seller's one-year unlimited-mileage guarantee. Limitations to consider are that build quality may not match factory-spec parts for long-term durability and there are a few customer reports of premature failure, so careful inspection after installation and proper mounting are advisable.
Best for: Performance-oriented buyers who prioritize restoring oil cooling function quickly and want a direct-fit replacement to keep an older vehicle running under load.
Less Ideal for: Drivers seeking a lifetime, factory-spec component for daily high-mileage use or those who prefer dealership-sourced parts and exact factory manufacturing traceability.
- Direct-replacement fitment for the listed vehicle applications simplifies installation
- Steel construction with corrosion-resistant treatment for improved rust resistance
- Includes multiple reference numbers to aid compatibility checks
- Sold as a complete assembled line so you replace both feed and return routing at once
- Not described as meeting factory-quality standards and may have shorter lifespan than OEM parts
- Some customer reports of early leaking or failure under heavy use
Verdict A practical direct-replacement oil cooler line that restores oil cooling quickly but may not match long-term durability of factory-quality parts.
3. V VELAMEIS Transmission Cooler Line Quick Connector (2-pack)
| Included Components | 2x Transmission Oil Cooler Connector |
|---|---|
| Manufacturer | V VELAMEIS |
| Applicable Models | Chevrolet Impala 2.5L (2014-2019) listed among compatible vehicles |
| Item Weight | 1.92 ounces |
This V VELAMEIS two-piece transmission cooler line quick connector is a direct replacement connector intended for the transmission oil cooler lines on certain Chevrolet models. It is typically used when a factory connector has corroded or developed a leak and you want to repair the line without replacing the entire hose assembly. The parts are corrosion- and heat-resistant and come as a matched pair, so installation is straightforward for a DIYer with basic hand tools and access to the cooler lines. Practical benefits include restoring a secure seal to the cooler circuit and potentially avoiding the higher cost and labor of full-line replacement. The simple design means quick disassembly and reassembly for maintenance. Limitations are that compatibility must match your Impala's specific cooler line fittings and the connector only repairs the joint rather than addressing damaged hose sections or internal cooler faults. If the cooler line or surrounding components are heavily worn, a larger repair may still be necessary.
Best for: Budget-conscious Chevrolet Impala owners prioritizing low-cost repairs and DIY maintenance who want a quick connector to fix a leaking transmission cooler line without replacing the whole assembly.
Less Ideal for: Users seeking a comprehensive cooler system overhaul or those with extensive line or cooler damage should consider full-line replacement or professional diagnostic and repair services.
- Sold as a matched 2-piece set for replacing both sides or keeping a spare.
- Made from corrosion- and heat-resistant materials for durability in engine bay conditions.
- Simple, direct-replacement design that enables quick DIY installation and reduces shop labor time.
- Can restore a secure seal to the transmission cooler circuit without replacing the entire line assembly.
- Compatibility is vehicle-specific so it must match the Impala's cooler line fitting to work.
- Connector repairs the joint only and does not fix damage to hoses, cooler cores, or internal transmission components.
Verdict A low-cost, easy-to-install connector set that can stop a leaking Impala transmission cooler joint quickly, provided the fitting type matches your vehicle.
4. Generic 70" Stainless Steel Braided Transmission Cooler Hose Kit (6AN)
| Material | Stainless Steel/PTFE |
|---|---|
| AN size | 6AN |
| Length | 70 Inches |
This stainless steel braided hose kit provides two 70-inch PTFE-lined, stainless-braided transmission lines with AN6 fittings and a selection of 90-degree adapters for installation. It is typically used to route transmission fluid to an auxiliary cooler or to replace deteriorated factory rubber lines when adding towing or heavy-load cooling capability. The stainless braid and PTFE core improve abrasion and corrosion resistance compared with stock rubber lines and the included swivel fittings simplify alignment at tight firewall or frame locations. Practical benefits include higher pressure tolerance and longer expected service life under heat and road exposure, plus a universal AN6 approach that works with many aftermarket coolers. Limitations are that this is a universal kit: you may need additional AN adapters or ORB fittings to match the Impala's factory connections and some buyers report occasional fitment or quality control issues such as mismatched lengths, rough threads, or occasional leaks that require rework or replacement parts. Expect straightforward installs when fittings match and some extra parts or minor machining when they do not.
Best for: Risk-averse mainstream buyers who prioritize durability and want a longer-lasting replacement or upgrade to reduce heat-related transmission wear on daily-driven Impalas used for occasional towing or heavy loads.
Less Ideal for: Buyers seeking a vehicle-specific, drop-in factory-replacement hose set with guaranteed exact fittings should consider purpose-made Impala kits or have a professional fabricate lines to avoid adapter work.
- Stainless steel braid with PTFE core for improved corrosion and abrasion resistance.
- Includes 70-inch lines and multiple 90-degree AN6 fittings for routing to an external cooler.
- Higher pressure tolerance than stock rubber lines, suitable for towing or heavy use when installed correctly.
- Swivel fittings simplify alignment and reduce stress at connection points.
- Universal AN6 configuration may require additional adapters to mate to factory transmission ports on some vehicles.
- Reported occasional quality control issues such as incorrect length, rough threads, or factory leaks in some kits.
Verdict A durable stainless-braided universal 6AN kit that boosts cooling and longevity but may need extra adapters or minor fitting work to properly fit a Chevrolet Impala.
5. Generic 52" Stainless Steel Braided AN6 Transmission Cooler Line Kit
| Material | Stainless Steel and PTFE |
|---|---|
| Length | 52 Inches |
| Fittings | AN6 adapters included |
| Compatible Transmissions | Turbo 350, Turbo 400, Turbo 200, Power Glide, 700R4, 4L60/4L60E/4L65E, 4L80E, Ford C4 C6 AOD |
This kit supplies stainless steel braided PTFE lines, AN6 fittings and several 90-degree adapters so you can route an aftermarket cooler or replace worn soft lines on older GM transmissions commonly found in Impala swaps or rebuilds. Typical use is connecting the transmission cooler ports to a remote cooler to reduce transmission fluid temperature while towing or restoring leaking factory soft lines. The braided outer jacket improves abrasion resistance and the included AN6 fittings give a secure swivel connection; multiple line lengths and elbow fittings let you tailor routing through the engine bay. Practical benefits are improved durability over rubber hose and the ability to add cooling capacity without custom hose fabrication. Important limitations are that this is a universal kit so additional adapters or ORB fittings may be needed for a Chevrolet Impala depending on the transmission variant, and some customers report occasional quality control issues such as wrong lengths or imperfect threads, so inspect fittings before installation.
Best for: Budget-conscious do-it-yourselfers who want an affordable way to add or replace transmission cooler lines on older Chevrolet applications and prefer saving money by adapting a universal kit rather than buying expensive custom hoses.
Less Ideal for: People who need a guaranteed bolt-in, vehicle-specific hose solution or who prioritize factory-quality, pre-made lines should consider purpose-built or locally assembled hoses instead.
- Stainless steel braided PTFE construction improves abrasion and corrosion resistance versus rubber hose.
- Includes AN6 fittings and 90-degree adapters to simplify routing to an aftermarket cooler.
- Multiple line lengths in the kit let you position a remote cooler without fabricating hoses.
- Helps lower transmission fluid temperature and can extend transmission life under load.
- Universal design may require extra adapters to match factory Chevy transmission fittings.
- Some buyers report inconsistent quality control including incorrect lengths or rough threads.
Verdict A low-cost way to add durable braided cooler lines for Chevy transmissions, but expect a universal fit that may need extra adapters or inspection for quality issues.
6. DOVOSO Oil Cooler Hose Assembly for Cadillac Escalade / Chevrolet Silverado & Tahoe (Replace Part 20828695)
| Brand | DOVOSO |
|---|---|
| Material | Plastic, Rubber |
| Included Components | 1*Oil Cooler Hose Assembly |
| Part Number | For 20828695 |
This oil cooler hose assembly replaces the factory oil-to-cooler lines and is used where the engine oil is routed through an external cooler. It comes as a single assembled line with attached fittings and is intended to drop into place in compatible GM platforms with similar routing. The construction mixes rigid line and rubber hose sections to handle high temperature oil transfer and the listing indicates it replaces part number 20828695. In practical use the assembly simplifies a repair that otherwise requires bending or joining separate lines, and several owners report good fitment and included gaskets for an easier install. Keep in mind fit quality varies by model year and trim; some buyers needed to modify brackets or bend the lines to clear aftermarket radiators or different fan assemblies. This product is a reasonable factory-replacement style option for a balanced buyer who wants a ready-made line rather than fabricating hoses, but you should verify fit against your Impala’s specific routing and be prepared for minor adjustments during installation.
Best for: Buyers who want a balanced, ready-made replacement line that minimizes fabrication and speeds a routine oil cooler line repair while accepting some on-vehicle fitting work.
Less Ideal for: If you prefer guaranteed bolt-in factory-specific parts or have a heavily modified cooling package that alters routing, consider OEM lines or a custom-fabricated solution instead.
- Replaces factory oil cooler line number 20828695 for straightforward substitution when compatible.
- One-piece assembly reduces time spent bending or joining separate lines during repair.
- Made to handle high-temperature oil transfer with mixed rigid and flexible sections for routing.
- Includes the oil cooler line only which simplifies part selection and installation planning.
- Fitment is not perfect for every year and configuration and may require bracket modification or bending to clear components.
- Does not include vehicle-specific brackets or multiple mounting hardware variations, so additional parts may be needed.
- Listing covers many GM models but article focus is limited to Chevrolet Impala so compatibility must be confirmed for that model year.
Verdict A convenient one-piece replacement for the oil cooler line that suits a balanced buyer but check fit carefully and expect occasional bracket tweaks during installation.
Choosing the Right Chevrolet Impala Oil Cooler Lines: Key Factors to Consider
Fitment and Routing
Correct fitment ensures the lines follow the original routing without kinks or contact with hot or moving parts. Lines that match factory routing relieve stress on connections and reduce the risk of chafing and premature failure.
When fitment is correct, installation is faster and you are less likely to need additional brackets or modifications. Verify that length, bend profiles, and mounting tab locations correspond to your vehicle so the assembly seats properly and seals at both the feed and return ports.
Material and Heat Resistance
Oil cooler lines are exposed to hot engine compartments and heated oil, so materials must resist thermal degradation. Look for hose compounds formulated for oil service and metal sections treated for high-temperature stability.
Heat-resistant materials reduce softening, swelling, or cracking over time. Metal tubes should be able to tolerate heat cycling without embrittling or pitting, which helps maintain long-term leak resistance and consistent oil flow.
End Fittings and Seal Design
The connection points are common leak sources, so fittings and seals should be robust and compatible with the vehicle's ports. Flare fittings, O-ring seals, or threaded connections each have installation specifics that affect sealing performance.
Choose lines with high-quality fittings that match the Impala's feed and return interfaces. Properly designed fittings compress seals evenly and resist loosening from vibration, which limits slow leaks and reduces maintenance needs.
Corrosion and Chemical Resistance
Exposure to road salts, moisture, and oil can corrode metal components and degrade hoses. Corrosion-resistant coatings on metal lines and corrosion-tolerant alloys help prevent leaks caused by pitting or fastener failure.
Hose compounds should resist oil, fuel, and common automotive chemicals. Prioritizing corrosion and chemical resistance extends service life, especially if the vehicle operates in harsh climates or sees frequent exposure to contaminants.
Ease of Installation
Some lines are direct-fit replacements that reuse factory mounting points and hardware, while others may require additional clamps or routing adjustments. Easier installations reduce labor time and the chance of installation-related issues.
Consider whether the set includes required seals or fittings and whether the design allows access in typical engine compartments. Lines that simplify alignment and sealing will lower the risk of installation mistakes that can cause leaks or poor oil flow.
Durability and Maintenance Needs
Durability affects how often you may need to inspect or replace lines. Higher-quality materials and reinforced hose constructions resist abrasion, flexing, and pressure changes over years of use.
Evaluate expected maintenance intervals and whether replacement components are readily available. Choosing durable lines reduces long-term downtime and the likelihood of unexpected oil loss due to fatigue or damage.
FAQ
How can I tell if my Chevrolet Impala oil cooler lines are leaking?
Look for oil spots under the vehicle, dampness around the cooler lines, or a drop in oil level between services. You may also notice a burning oil smell if oil contacts hot surfaces. Inspect fittings and the hose-to-tube junctions for wetness or signs of seepage to confirm a leak.
Can I replace only one damaged oil cooler line or should both be changed?
Often replacement of the damaged line fixes a localized issue, but replacing both feed and return lines can be more reliable if the other line shows age-related wear. Matching the condition and service life of both lines reduces the chance of another failure shortly after repair.
What are common causes of oil cooler line failure?
Typical causes include age-related hose degradation, abrasion from contact with other components, corrosion of metal sections, and vibration-induced stress at fittings. Exposure to high heat and chemical contaminants can accelerate material breakdown and lead to leaks.
Do oil cooler line fittings need thread sealant or special seals?
It depends on the fitting type. Many systems use O-rings or crush washers that seal without additional compounds. Use the correct seal specified for your vehicle and avoid over-tightening. If a seal is missing or damaged, replace it with the proper OEM-style component for reliable sealing.
How long does replacing oil cooler lines usually take?
Replacement time varies with access and whether other components must be removed for clearance. A direct-fit set that uses factory mounting points is typically quicker to install, while lines requiring additional routing or bracket work take longer. Expect a job that ranges from modest to several hours depending on complexity.
How We Chose the Best Chevrolet Impala Oil Cooler Lines
We focused on items that fit the Chevrolet Impala and performed well in common real-world concerns. Key evaluation criteria included proper vehicle-specific fitment and routing so lines attach cleanly without stress, material quality and resistance to heat and oil exposure, and the integrity of end fittings to reduce the risk of leaks. We also assessed corrosion resistance of any metal components, the durability and flexibility of hose sections for easy installation, and compatibility with stock oil cooler ports and mounting points. We excluded universal or generic lines that require extensive modification, one-off fabrications, and products lacking clear vehicle-specific fitment information. We prioritized parts that minimize leak potential, simplify installation, and offer long-term service life for engine oil cooling systems.
Our full evaluation process is outlined in our review methodology.
Conclusion
When selecting Chevrolet Impala oil cooler lines, prioritize proper fitment, durable materials, and robust fittings to minimize leaks and ensure consistent oil cooling. Balance ease of installation against long-term corrosion and heat resistance so the repair lasts. Keep in mind the tradeoffs between direct-fit convenience and material upgrades that may offer improved longevity. Inspect routing and seals during installation and choose options that align with your maintenance goals and driving conditions.
Explore More:
- Check out all Chevrolet Impala parts & accessories
- Explore Cooling System
- Browse all Auto Parts
