Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Replacing the oil pump on a Chevrolet Impala is one of the most effective ways to protect engine components and maintain steady oil pressure. If you experience low pressure, unusual noises, or fluctuating gauges, selecting the right pump can prevent further wear and costly repairs. This guide highlights the top shortlisted options for the Impala and explains the key factors that matter for fitment, flow, and longevity. Read on to see which features we prioritized when evaluating the best oil pumps for this vehicle.
Looking for other parts? See all Chevrolet Impala parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Melling M55 Replacement Oil Pump |  |
| Most Popular A crowd favorite that many people choose with confidence | Dorman 926-238 Variable Oil Pump Control Valve |  |
| Best Quality Built to a higher standard if you want something more solid | Dexonu Engine Oil Pump (fits Chevrolet Impala 2.4L) |  |
| Best Budget The cheapest option that still gets the job done reliably | chefull M77HV High-Volume Cast Iron Oil Pump (M77HV) |  |
| Most Sold A high-volume bestseller chosen again and again | A-Premium Oil Pump for Chevrolet V6 Engines (Standard Volume) |  |
| Best Value for Money The sweet spot between price and what you get | AULINK M349 Engine Oil Pump (Fits Chevrolet Impala 2.0L/2.2L/2.4L) |  |
| Best Overall The best all-around choice for most situations | YzusGomumu M295HV High-Volume LS Oil Pump Kit with Gaskets and Balancer Bolt |  |
1. Melling M55 Replacement Oil Pump
| Fit type | Vehicle Specific |
|---|---|
| Housing Material | Cast Iron |
| Grade Type | Regular |
| Gasket Or Seal Included | No |
The Melling M55 replacement oil pump is a direct-fit internal wet-sump pump intended for small-block Chevy engines and used to restore reliable oil pressure in rebuilds or repairs. In typical use it replaces a worn or damaged pump during an engine rebuild or as a like-for-like service part; installers report straightforward fitment and included drive-shaft bushing that simplifies installation. Notable features are its machined exterior and cast iron housing, which provide durability and a factory-quality feel, plus standard volume flow suitable for street engines. In practice the pump yields noticeably higher idle and running oil pressures on stock small-block Chevy builds, which helps protect bearings and reduce risk of oil starvation. Limitations are that it is a standard-volume pump rather than a high-volume/performance unit, so it is not intended for high‑rev or heavily modified engines that need increased flow, and gaskets or seals are not included so additional parts may be required at installation.
Best for: Reliability-focused buyers who prioritize a durable, factory-quality replacement to restore correct oil pressure in small-block Chevy Impala engine rebuilds or routine repairs.
Less Ideal for: Drivers planning high-performance builds or requiring higher-than-stock oil flow should consider a dedicated high-volume pump or performance-oriented option.
- Direct replacement designed for small-block Chevy engines for straightforward fitment
- Cast iron housing and machined exterior for durable, factory-quality construction
- Includes drive shaft bushing which simplifies installation
- Standard-volume flow restores solid oil pressure for stock street engines
- Does not include gasket or seals so additional parts may be needed at installation
- Standard-volume design is not suitable for high-rev or heavily modified engines requiring increased flow
Verdict A dependable, factory-quality replacement that reliably restores oil pressure on stock small-block Chevy Impala engines but is not aimed at high-performance builds.
2. Dorman 926-238 Variable Oil Pump Control Valve
| Manufacturer | Dorman Products |
|---|---|
| Model | Dorman 926-238 |
| Manufacturer Part Number | 926-238 |
| OEM Part Number | 12632008; 12658750; 12665170; 12670746; 25202542 |
This Dorman 926-238 variable oil pump control valve replaces a clogged or damaged factory control valve to restore oil flow regulation for variable timing systems. It installs in place of the original valve and is typically used when a check engine light or timing-related fault codes indicate low or erratic oil pressure to the timing system. The part is built from durable materials and Dorman reports quality testing and try-on verification for fit. In practice it offers a cost-effective alternative to a factory part and can clear timing oil pressure codes quickly when the original valve is the issue. Buyers should confirm vehicle trim fitment before ordering because proper function depends on correct application, and a replacement valve will not fix unrelated oil pump or sensor failures. Installation requires basic mechanical access and may need a scan tool to clear or verify stored codes after fitting.
Best for: Buyers who value convenience and want a ready-made replacement that saves time versus sourcing dealer parts, ideal for DIYers or shops needing a quick fix for timing oil pressure control issues.
Less Ideal for: Drivers who prefer dealer-original parts or who suspect broader oil system failures should consider a full diagnostic and alternative repair paths rather than just replacing the control valve.
- Direct replacement designed to match fit and function of the original control valve.
- Durable construction with manufacturer testing for fit and long service life.
- Compatible with a wide range of GM models, simplifying parts sourcing for common engines.
- Cost-effective alternative to factory replacement parts.
- Must verify exact trim and year fitment before purchase since compatibility varies by vehicle.
- Does not address failures caused by the oil pump, wiring, or unrelated sensors.
Verdict A practical, budget-friendly factory-replacement control valve that quickly restores oil pressure control for compatible Chevrolet Impala applications when the valve itself is the problem.
3. Dexonu Engine Oil Pump (fits Chevrolet Impala 2.4L)
| Brand | Dexonu |
|---|---|
| Item model number | XLB-1169-S-JL |
| Manufacturer Part Number | XLB-1169-S-JL |
| Compatible engine | 2.4L l4 |
This Dexonu engine oil pump is a direct-replacement unit intended to restore proper oil circulation and pressure on compatible Chevrolet Impala 2.4L engines. It installs in place of the factory pump and is used when the original pump is worn, noisy, or causing low oil pressure. The listing highlights compatibility with several GM 4-cylinder applications and lists multiple replacement part numbers for cross-reference. In practice the pump's construction is aimed at durability and consistent lubrication to protect bearings and valvetrain components. Buyers can expect a ready-to-install aftermarket unit that brings oil pressure back to factory-like levels when paired with correct gaskets and installation procedures. Limitations include reliance on correct fitment confirmation for the Impala 2.4L and the usual risks of aftermarket variation in tolerances compared with factory-quality parts, so professional installation and pressure testing after fitment are recommended.
Best for: Performance-oriented buyers who prioritize restoring reliable oil pressure and protecting an Impala 2.4L engine after a failing pump, and who plan professional installation and testing.
Less Ideal for: Buyers seeking a guaranteed factory-quality, dealer-sourced replacement or those unwilling to verify fitment for the Impala 2.4L should consider alternatives.
- Direct-replacement design intended to restore oil pressure and lubrication
- Cross-referenced to multiple OEM part numbers for easier fit confirmation
- Designed for durability to protect engine bearings and valvetrain when installed correctly
- Aftermarket tolerances may differ from factory-quality parts requiring careful fit verification
- Fitment must be confirmed specifically for the Impala 2.4L before purchase
Verdict A performance-focused aftermarket replacement to restore oil pressure on Chevrolet Impala 2.4L engines, but verify fitment and plan professional installation.
4. chefull M77HV High-Volume Cast Iron Oil Pump (M77HV)
| Material | Cast Iron |
|---|---|
| Oil Pump Volume Type | High Volume |
| Oil Pump Pressure Type | Standard Pressure |
| Mounting Hole Quantity | 2 |
| OEM Part Number | M77HV, SKPM77HV, 98337 |
This chefull M77HV oil pump is a straightforward replacement designed to restore oil circulation on compatible classic Chevrolet Impala engines. It installs where the factory pump lives and is marketed as a direct replacement with cast-iron housing and a high-volume, standard-pressure design. In practice the high-volume profile can help maintain stronger oil flow at higher rpms or in modified engines that need extra capacity, while the cast-iron construction aims for durability. Installation is typical for engine front-end oil pumps and will require matching the pickup tube and bolt pattern to the engine. Important limitations for Impala buyers: the pump uses a specific pickup-tube location and mounting pattern, so some early small-block pickup tubes may not align and could require a different tube or modification. Gasket is not included, so plan to source a proper seal and follow torque and clearance checks during fitment. For budget-focused Impala restorers or mild performance builds this pump gives increased flow without a big cost, but check pickup compatibility before ordering.
Best for: Budget-conscious Impala owners restoring or mildly upgrading older V8 engines who prioritize affordable parts that increase oil flow without major engine changes.
Less Ideal for: Owners seeking a guaranteed bolt-in solution for highly modified or unusual pickup-tube arrangements, or buyers who want a complete installation kit with seals included.
- High-volume design increases oil flow for higher rpm or mildly modified engines.
- Cast iron housing for robust, long-wearing construction.
- Sold as a direct replacement for older Chevrolet V8 engines to simplify installation.
- Pickup-tube hole location may not match every Impala small-block configuration and can prevent fitment without modification.
- Gasket is not included, so additional parts are required for installation.
Verdict A low-cost, high-volume replacement for classic Chevrolet Impala engines that improves oil flow but requires checking pickup-tube compatibility and buying a gasket separately.
5. A-Premium Oil Pump for Chevrolet V6 Engines (Standard Volume)
| Housing Material | Cast Iron |
|---|---|
| Oil Pump Volume Type | Standard Volume |
| Oil Pump Pressure Type | Standard Pressure |
| Mounting Hole Quantity | 1 |
This A-Premium oil pump is a direct replacement-style unit intended for Chevrolet V6 engines such as the Impala 3.4L and similar GM applications. It provides standard volume and standard pressure performance in a cast-iron housing and is supplied without an O-ring, so installation requires the correct seal and attention to mating surfaces. Typical use is as a repair or refresh when the factory pump fails or oil pressure drops; installers report straightforward fitment to the pump bolt pattern and acceptable cold oil pressure after installation. The pump includes the OEM reference numbers for cross-checking fitment and is sold with a one-year warranty. Expect a basic, functional unit that restores oil circulation and pressure, but be prepared for some installation work like pressing the pickup tube into place and confirming sealing components since those are not included. This is a practical replacement for getting an older Impala back into service without upgrading to a high-volume or high-pressure aftermarket pump.
Best for: Risk-averse mainstream buyers looking to restore reliable oil pressure on a Chevrolet Impala without changing engine characteristics, prioritizing a straightforward factory-style replacement.
Less Ideal for: Drivers building performance engines or those who need increased oil flow or pressure should choose a high-volume or high-pressure upgrade instead.
- Cast-iron housing for durability in regular engine use
- Standard-volume and standard-pressure design matches factory performance
- Includes OEM reference numbers for straightforward compatibility checks
- One-year warranty included for peace of mind
- Does not include an O-ring so buyer must supply correct seal during install
- Standard performance only no increased flow or pressure for performance builds
Verdict A practical, factory-style cast-iron replacement that restores standard oil pressure on compatible Chevrolet V6 engines but does not boost performance.
6. AULINK M349 Engine Oil Pump (Fits Chevrolet Impala 2.0L/2.2L/2.4L)
| Manufacturer | AULINK |
|---|---|
| Item model number | M349 |
| Lift Type | Mechanical |
| OEM Part Number | M349,OP314,12582069,12584621,12606580,12637040,24434092,24446417,24450057,90537586,90537914 |
This AULINK M349 oil pump is a direct-fit replacement intended for Chevrolet Impala 2.0L/2.2L/2.4L engines and installs like a factory-style mechanical pump. It supplies engine oil pressure to lubricate bearings, camshafts, and other moving parts, so it is typically used during timing-cover or top-end repairs where the original pump is worn or leaking. Notable features from the listing include full function and leak testing, a claimed fit kit with necessary hardware, and manufacturing in TS16949 certified facilities. In practice this means the pump should bolt in without modification and deliver the oil pressure the engine needs to run safely. Buyers get a cost-effective aftermarket alternative to a factory replacement, with multiple user reports of trouble-free fitment and performance. Important limitations are typical for aftermarket pumps: long-term durability versus a factory-quality unit is uncertain and one reviewer noted the pump shipped without a gasket, so confirm what seals are included before installation. Have a professional check clearances and torque specs during replacement to avoid issues.
Best for: Practical optimizers who want a reliable, budget-conscious replacement that restores oil pressure and avoids the premium of dealer parts while keeping repair costs low.
Less Ideal for: Buyers who prioritize a factory-branded part or require extended proven longevity without any risk should consider a dealer or OEM replacement instead.
- Designed to fit Chevrolet Impala four-cylinder 2.0L/2.2L/2.4L engines for direct replacement.
- Function and leak tested at the factory to reduce risk of early failure.
- Manufactured in TS16949 certified facilities, indicating automotive production standards.
- Multiple customer reports confirm straightforward installation and proper oil pressure restoration.
- Long-term durability compared with factory-quality pumps is not proven by the listing.
- At least one buyer reported the part shipped without a gasket, so installers may need to source seals separately.
Verdict AULINK M349 is a cost-effective, function-tested replacement that restores oil pressure on compatible Chevy Impala four-cylinder engines, but confirm gasket inclusion and accept some uncertainty on long-term durability.
7. YzusGomumu M295HV High-Volume LS Oil Pump Kit with Gaskets and Balancer Bolt
| Compatible engines | 4.8L, 5.3L, 5.7L, 6.0L, 6.2L GM V8 |
|---|---|
| OEM part numbers | M295HV, 12696357, 12586665, 224-43645, 601-2106 |
| Claimed flow increase | ~18% higher volume |
| Claimed pressure change | ~10% higher pressure relief setting |
The M295HV kit replaces the factory oil pump on compatible GM small-block V8s and bundles gaskets and a harmonic balancer bolt to simplify installation. It is marketed as a high-volume unit with roughly 18% more flow and a slightly higher pressure relief setting, which helps improve lubrication and cold-start pressure in engines that run low on oil pressure. Typical use is direct replacement during an engine rebuild or when low oil pressure is diagnosed; buyers report noticeable jumps in idle and cold-start PSI after installation. The kit includes the pump, gaskets, and hardware so you do not need to source parts separately, but some customers noted missing bolts or extra springs in a few shipments so check the kit contents before assembly. Expect a solid performance boost for street and towing use, but installation requires standard engine disassembly and correct torqueing of the pump and balancer bolt to avoid leaks or premature wear.
Best for: A balanced, practical buyer who wants a straightforward performance and reliability upgrade for a Chevrolet LS-series V8 rather than a race-only pump.
Less Ideal for: Drivers seeking a race-spec, high-RPM-only pump or those unwilling to perform engine-level installation should consider purpose-built performance units or professional installation services.
- Higher volume pump increases oil flow compared with a standard pump.
- Includes gaskets and a balancer bolt to simplify a single-shop install.
- Higher pressure relief setting can improve idle and cold-start oil pressure.
- Multiple reported installs confirm tangible pressure gains on 5.3L and 6.0L engines.
- Some buyers received kits with missing or extra small parts and minimal documentation.
- Not a direct fit for every Chevrolet V8 variant—confirm OEM part numbers before purchase.
Verdict A practical, full-kit high-volume replacement that raises oil flow and idle pressure for compatible Chevrolet V8s, but verify part numbers and check kit contents before installation.
Choosing the Right Chevrolet Impala Oil Pump: Key Factors to Consider
Flow Rate and Pressure Output
Flow rate and pressure output determine how quickly and consistently oil circulates through the engine, which affects bearing lubrication and component cooling. A pump that provides steady pressure across the engine's operating range helps reduce metal-to-metal contact and supports hydraulic lifters and variable valve mechanisms.
Look for pumps with documented performance curves or manufacturer specifications that match the Impala's engine requirements. Overly high or unstable pressure can stress seals and gaskets, while insufficient flow increases wear. Consider how the pump performs at cold start and at higher rpm to ensure adequate protection in all conditions.
Fitment and Compatibility
Correct fitment ensures the pump mates with the Impala's pickup tube, housing, and oil pan without modification. A pump that matches factory mounting points, gasket surfaces, and shaft engagement reduces installation time and leak risk. Compatibility also affects pickup placement which influences suction and cavitation resistance.
Confirm the pump specifies Chevrolet Impala compatibility for the correct engine family and model years. Pumps requiring minor machine work or nonstandard adapters can add complexity and potential failure points, so prioritize units designed for direct replacement when possible.
Materials and Build Quality
Materials and manufacturing tolerance influence wear resistance, internal clearances, and longevity. Hardened gears, quality bearings, and corrosion-resistant coatings extend service life and maintain performance under heat and contamination.
Inspect whether the pump uses precision-machined components and durable finishes. Poor casting, loose tolerances, or substandard fasteners can lead to premature wear or sudden failure. Durable construction also helps maintain pressure stability as parts wear over time.
Pickup and Gasket Interface
The pickup screen and gasket interface control how effectively oil is drawn from the pan and sealed at the mounting surface. A well-designed pickup minimizes air ingestion and debris buildup, which preserves pump priming and reduces noise. Proper gasket sealing prevents leaks that can drop pressure.
Check that replacement pumps include or match the correct pickup length and gasket shape for the Impala. Consider whether the pump uses an integrated gasket, O-ring, or separate seal and how that choice affects ease of service and leak resistance.
Noise and Vibration Characteristics
Excessive noise or vibration from the oil pump can indicate cavitation, misalignment, or internal wear and may precede failure. Pumps designed with tight tolerances and balanced rotors tend to run quieter and reduce NVH transmitted through the engine.
Consider reported noise levels and whether the design reduces pulsation that can affect oil pressure sensors. Quieter operation often correlates with smoother flow and better longevity, which is particularly important for daily-driven Impala vehicles.
Warranty and Support
Warranty length and manufacturer support reflect confidence in the product and can reduce ownership risk if a defect appears. A clear warranty policy that covers manufacturing faults and premature failure provides reassurance for a critical engine component.
Look for documented coverage terms and an accessible support channel. Extended or transferable warranties may indicate higher expected durability, and prompt technical support can be helpful if installation questions or fitment issues arise.
FAQ
What are common symptoms of a failing oil pump in a Chevrolet Impala?
Common signs often include a persistent low oil pressure reading, unusual whining or grinding noises from the engine, and illuminated pressure warning lights. You may also notice increased engine wear or lifter noise over time. These symptoms usually appear gradually but can accelerate if left unaddressed.
Can I replace the oil pump myself on an Impala?
Many mechanically skilled owners can perform a pump replacement, but it depends on the engine layout and tools available. Proper torque, seal installation, and pump priming are important to avoid leaks or air pockets. If you are unsure about drain and refill procedures or pressure testing after installation, consult a professional.
How long does an oil pump typically last in regular driving?
An oil pump often lasts many years under normal driving, commonly matching major engine life if the oil is changed regularly and the engine is well maintained. Longevity depends on factors such as oil quality, contamination, and operating conditions. Regular inspection and addressing low pressure signs early can extend service life.
Will switching to a high-pressure oil pump benefit my Impala?
A high-pressure pump can raise system pressure, which may help in certain high-load scenarios, but it can also increase stress on seals and components. For routine street use, matching the pump's output to the engine's design is usually preferable. Consult engine specifications and consider potential tradeoffs before selecting higher pressure.
What should I check after installing a new oil pump?
After installation, confirm correct gasket seating and torque, refill with the proper oil grade, and prime the pump if recommended. Start the engine and monitor oil pressure gauge and look for leaks at the pump and pan. Allow the engine to reach operating temperature and recheck pressure and fastener torque as needed.
How do oil pump gasket seals affect performance?
Gasket seals prevent external leaks and ensure the pump can build and maintain pressure. A compromised seal can allow air ingress or oil loss, reducing effective pressure and potentially causing pump cavitation. Choosing the correct gasket type and ensuring proper installation is essential for reliable pump operation.
How We Chose the Best Chevrolet Impala Oil Pump
We focused on criteria that directly affect lubrication performance and engine longevity for the Chevrolet Impala. Primary factors included measured flow rate across engine rpm, pressure stability under load, and materials or coatings that resist wear and corrosion. We also evaluated mechanical tolerances and manufacturing consistency to infer long-term reliability. Ease of installation and compatibility with factory pickup and gasket interfaces were considered to ensure straightforward replacement. Warranty terms and documented durability guidance helped gauge manufacturer confidence. We excluded parts that lacked clear fitment data for the Impala or that required unspecified modifications. We also set aside pumps designed solely for racing or extreme high-performance engines when they compromised daily drivability or compatibility. The final shortlist contains pumps that balance reliable pressure delivery, durability, and practical installation for street-driven Chevrolet Impala models.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right oil pump for a Chevrolet Impala means balancing reliable flow and pressure with correct fitment and durable construction. Prioritize pumps that document flow and pressure performance, match the vehicle's pickup and gasket interfaces, and use quality materials to minimize wear. Keep in mind the tradeoffs between higher pressure and seal stress, and factor in ease of installation and warranty support when deciding. Addressing early symptoms and choosing a pump aligned with the engine's design will help preserve lubrication and extend engine life.
Explore More:
- Check out all Chevrolet Impala parts & accessories
- Explore Engine
- Browse all Auto Parts
