Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
When a tail light assembly fails or looks worn, it affects visibility, safety, and the overall appearance of your Chevrolet Impala. Choosing the right assembly matters because the correct unit restores proper signaling, ensures a secure fit, and resists moisture and vibration over time. This guide covers the top shortlisted tail light assemblies for the Chevrolet Impala, chosen for dependable fitment and solid construction. We evaluated each option for aspects like physical compatibility, ease of installation, and build quality to help you pick the right replacement. Read on to see the top picks and what to look for when replacing a Chevrolet Impala tail light assembly.
Looking for other parts? See all Chevrolet Impala parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | ACANII Tail Light Assembly for 2014–2020 Chevy Impala, Left Driver Side |  |
| Most Popular A crowd favorite that many people choose with confidence | Nilight Taillight Assembly for 2006–2016 Chevrolet Impala (Drive & Passenger Side) |  |
| Best Quality Built to a higher standard if you want something more solid | Dorman 1611328 Passenger Side Tail Light Assembly for Chevrolet Impala |  |
| Best Budget The cheapest option that still gets the job done reliably | Dorman 1611615 Right Passenger Tail Light Assembly for Chevrolet HHR (select years) |  |
| Most Sold A high-volume bestseller chosen again and again | TYC Left Tail Light Assembly for 2006–2013 Chevrolet Impala |  |
| Best Value for Money The sweet spot between price and what you get | Lochnchn Rear Right Tail Light Assembly for Chevy Impala 2014–2020 |  |
| Best Overall The best all-around choice for most situations | JSBOYAT Headlight and Tail Light Assembly Pair for 2006–2013 Chevrolet Impala |  |
1. ACANII Tail Light Assembly for 2014–2020 Chevy Impala, Left Driver Side
| Vehicle Fit | 2014–2020 Chevy Impala 4-Door Sedan |
|---|---|
| Position | Rear Left (Driver Side) |
| Lens Material | Polycarbonate |
| Special Feature | Waterproof |
| Regulatory | DOT and SAE stamped |
This ACANII tail light assembly replaces the left driver-side rear lamp on 2014–2020 Chevy Impala sedans and is sold as the housing and lens only. It is intended as a factory-style replacement that meets DOT and SAE markings, with a polycarbonate lens for UV and impact resistance and a butyl seal to keep out moisture and debris. Typical use is to restore damaged or missing rear lighting after collision or seal failure; the part installs into the factory opening and uses the vehicle-specific mounting points. Practical benefits include a close visual match to the original, stamped regulatory markings for street legality, and a waterproof design that reduces the chance of condensation inside the housing. Important limitations are that bulbs and installation instructions are not included and some buyers report that access requires removing the wheel or working from underneath the car, so professional installation may be easier for less experienced owners.
Best for: Buyers who prioritize a reliable, factory-style replacement for restoring rear lighting on a Chevy Impala and who value parts that reduce the risk of water intrusion and interior damage.
Less Ideal for: Drivers who want a plug-and-play kit with bulbs and detailed step-by-step installation guidance or those seeking a cosmetic upgrade beyond a stock-equivalent appearance.
- Designed to match factory fitment for 2014–2020 Chevy Impala left-side replacement
- Polycarbonate lens with UV protection and impact resistance
- Butyl seal and waterproof construction to minimize condensation and debris entry
- Meets DOT and SAE regulations for legal road use
- Does not include bulbs or installation instructions
- Installed access can be difficult and may require wheel removal or work from under the vehicle
Verdict A dependable, factory-style left tail light replacement for 2014–2020 Chevy Impala owners who need a durable, waterproof assembly but are prepared to supply bulbs and handle a more involved installation.
2. Nilight Taillight Assembly for 2006–2016 Chevrolet Impala (Drive & Passenger Side)
| Compatibility | 2006–2013 Chevy Impala; 2014–2016 Chevrolet Impala Limited (4-door sedan halogen only) |
|---|---|
| Lens material | Polycarbonate |
| Special feature | Dustproof, Waterproof |
| Mounting | Vehicle specific fit, plug-and-play sockets |
| Compliance | DOT & SAE compliant |
This Nilight taillight assembly replaces the rear lamp on Chevy Impala 4-door sedan halogen models and is offered for both driver and passenger sides. It installs with the factory sockets in a plug-and-play manner so you can swap it into the original mounting locations without drilling or modification, and bulbs are included. The housing is described as impact-resistant with UV-resistant polycarbonate lens and sealed silicone and one-way vents to keep moisture and dust out, which helps prevent yellowing and water intrusion seen in older units. It is DOT and SAE compliant for road use, and users report the fit is generally accurate for Impala applications. Expect straightforward DIY installation if you are comfortable removing the tail panel, but some buyers have reported imperfect seals or alignment that required minor adjustments or additional sealant. This unit upgrades the look and restores nighttime visibility but, like many aftermarket assemblies, occasional quality-control or fitment tweaks may be necessary for a perfect factory-like fit.
Best for: Buyers who prioritize convenience and want a direct, mostly plug-and-play replacement to restore rear lighting and appearance on a Chevrolet Impala with minimal fuss.
Less Ideal for: Shoppers seeking an exact factory-quality fit without any possibility of minor adjustment or those who prefer preinstalled upgraded LED lighting should consider higher-end or OEM replacements instead.
- Vehicle-specific fit for 2006–2016 Chevrolet Impala 4-door sedan halogen models
- Plug-and-play connection with factory-style sockets for easy installation
- Impact-resistant polycarbonate lens with UV-resistant material to reduce yellowing
- Sealed design with one-way venting intended to limit moisture and dust ingress
- DOT and SAE compliance for legal road use
- Some buyers report inconsistent sealing or assembly quality requiring additional sealing or minor alignment work
- Bulbs included are standard and higher-quality aftermarket bulbs may be needed for improved brightness
Verdict A convenient, vehicle-specific taillight replacement that restores appearance and function for Impala sedans with mostly easy installation but may need small seal or fit tweaks for a perfect fit.
3. Dorman 1611328 Passenger Side Tail Light Assembly for Chevrolet Impala
| Vehicle fit | Chevrolet Impala 2006-2008 |
|---|---|
| Position | Passenger side (right) |
| Wattage | 35 watts |
| Lens material | Glass |
This Dorman passenger side tail light assembly replaces a damaged or faded factory unit and is built to match the stock fit and function on select Chevrolet Impala models. It ships with bulbs preinstalled so installation is usually a quick swap at the rear of the vehicle with no special tools required. The assembly uses a clear red lens and factory-style mounting points so it lines up with the original housing for a seamless appearance. Buyers will appreciate the durable construction intended to hold up against weather and road exposure, and many users report fast, trouble-free installs. A few customers noted gasket or seal placement issues that needed minor adjustment during installation, so expect a brief check of the seal before final mounting. If you want a reliable, performance-oriented replacement that restores original lighting function without returning to the dealer, this is a practical choice.
Best for: A performance-oriented buyer who wants a high-quality, close-to-factory replacement that restores lighting function quickly and keeps the Impala looking and performing like stock.
Less Ideal for: If you want an exact original manufacturer part or certified dealer replacement, consider sourcing a factory-sourced assembly instead.
- Designed to match factory fit and appearance for a seamless replacement
- Preinstalled bulbs reduce installation time
- Durable lens and housing for resistance to weather and road conditions
- Many users report quick, straightforward installation
- Some units have arrived with the rubber seal or gasket mispositioned requiring manual adjustment
- Not a brand-new OEM unit so minor fitment tweaks may be needed during installation
Verdict A cost-effective, factory-style passenger tail light that restores Impala functionality and appearance with fast, mostly trouble-free installation.
4. Dorman 1611615 Right Passenger Tail Light Assembly for Chevrolet HHR (select years)
| Vehicle fit | Chevrolet HHR (select years) |
|---|---|
| Position | Passenger side, right |
| Wattage | 35 watts |
| Lens material | Plastic |
This Dorman tail light assembly replaces a damaged passenger-side unit with a part intended to match factory fit and function on the specified Chevrolet HHR model years. It ships preassembled with the bulb installed and uses rigid plastic construction to withstand road and weather exposure. Installation is straightforward for a DIYer familiar with basic rear trim removal, and multiple owners report it lines up and secures like the original. As a budget-focused aftermarket option, it offers reliable illumination and an OEM-style appearance without the dealer markup. Limitations to consider are that it is a vehicle-specific fit for certain HHR years only, so you must confirm trim and year compatibility before buying, and the finish and sealing may differ subtly from a factory part, which could require minor adjustments to achieve a perfect flush fit. For routine tail light replacement this unit delivers comparable performance at a lower cost than factory parts.
Best for: Budget-conscious owners seeking a low-cost, DIY-friendly replacement that restores factory-style function and appearance on a qualifying Chevrolet HHR.
Less Ideal for: Drivers who need an exact factory-matched finish or who prefer OEM-sourced parts and dealer support should consider dealer replacement options.
- Designed to match factory fit for a seamless replacement on compatible Chevrolet HHR models
- Arrives preassembled with bulb installed for faster installation
- Rigid plastic housing resists weather and road conditions
- Vehicle-specific fit reduces need for modifications during install
- Fits only select Chevrolet HHR years and trims so compatibility must be confirmed before purchase
- Finish and weatherstripping may sit slightly proud and require minor trimming or adjustment
Verdict A practical, wallet-friendly right tail light replacement for compatible Chevrolet HHRs that restores function and fit for less than dealer parts.
5. TYC Left Tail Light Assembly for 2006–2013 Chevrolet Impala
| Specific Uses For Product | Tail Light |
|---|---|
| Auto Part Position | Rear |
| Special Feature | Waterproof |
| Automotive Fit Type | Vehicle Specific Fit |
This TYC left tail light assembly is a direct-fit replacement designed for the 2006–2013 Chevrolet Impala. It arrives as a complete rear lamp so you replace the whole assembly rather than individual bulbs, and the unit is built to meet SAE/DOT photometric and safety guidelines for road use. Typical installation is straightforward for a DIYer or technician because the part is vehicle-specific and requires no assembly; many buyers report quick bolt-in installation and that needed hardware and bulbs are included. The lens has a protective coating to resist hazing and fading, which keeps illumination consistent over time, and the housing is specified as waterproof for weather resistance. Limitations are that this is an aftermarket replacement rather than factory-brand and one reviewer noted minor fitment variation on one unit, so check alignment at install and expect occasional adjustment. If you want a lower-cost replacement that largely mirrors factory performance, this is a practical option.
Best for: Risk-averse mainstream buyers who prioritize restoring factory-like function and safety at lower cost than dealership parts and prefer a straightforward, drop-in replacement.
Less Ideal for: Buyers seeking an exact factory-branded unit for concours-level originality or those who need guaranteed long-term parts availability should consider alternatives.
- Vehicle-specific design for direct-fit installation on 2006–2013 Chevrolet Impala
- Meets SAE/DOT standards for photometric and safety compliance
- Protective lens coating to reduce hazing and fading over time
- Waterproof housing helps resist weather-related damage
- Often includes bulbs and mounting hardware for faster replacement
- Aftermarket part so fit and finish may vary slightly compared with factory-brand units
- Manufacturer appears to have discontinued the model, which could affect long-term availability
Verdict A cost-effective, vehicle-specific replacement that restores safe rear lighting for 2006–2013 Impala owners but may show minor fitment differences versus factory-brand parts.
6. Lochnchn Rear Right Tail Light Assembly for Chevy Impala 2014–2020
| Vehicle Service Type | Chevy Impala 2014-2020 |
|---|---|
| Auto Part Position | Rear Right |
| Lens Material | Polycarbonate |
| Special Feature | Waterproof |
This right-side outer taillight assembly replaces the factory unit on Chevy Impala model years 2014–2020 and comes with bulbs installed for a direct-fit replacement. It is built from polycarbonate and ABS-grade components and marketed as waterproof and dustproof, so it is intended to handle normal driving exposure and deliver bright brake and running light performance. Installation is plug-and-play for mechanics and experienced DIYers, though several reviewers note that disassembling trim and access panels can take time and basic troubleshooting may be required since no printed instructions are included. The light matches factory appearance closely and uses the listed replacement part numbers for compatibility, so it is a practical way to restore a damaged or fogged original lens without paying dealer prices. Be aware this is an aftermarket assembly from a third-party brand rather than a factory part, so long-term fitment and finish may vary slightly versus a factory-quality unit.
Best for: Practical optimizers who want a cost-effective, vehicle-matching replacement to restore function and appearance without paying dealer prices; suitable for owners comfortable with routine trim removal or paying a local shop for installation.
Less Ideal for: Buyers seeking guaranteed factory-quality parts with manufacturer-backed fitment confidence or those unwilling to handle moderate installation work should consider dealership replacements instead.
- Vehicle-specific fit for Chevy Impala 2014–2020 using listed replacement part numbers
- Comes with bulbs pre-installed for quicker installation
- Waterproof and dustproof construction aimed at longer service life
- Polycarbonate lens and ABS materials that closely match the original appearance
- No printed installation instructions included, which can lengthen DIY fitment time
- Aftermarket part may show minor fit or finish differences compared with factory-quality assemblies
Verdict A practical, budget-friendly right taillight assembly that restores factory look and function for 2014–2020 Impalas but is an aftermarket unit that may require careful installation.
7. JSBOYAT Headlight and Tail Light Assembly Pair for 2006–2013 Chevrolet Impala
| Vehicle Service Type | 2006-2007 Monte Carlo, 2006-2013 Chevrolet Impala, 2014-2016 Chevrolet Impala Limited |
|---|---|
| High Beam Bulb Type | H9 (not included) |
| Low Beam Bulb Type | H11 (not included) |
| Taillight Bulbs Included | 3057 and 921 bulbs (specified) |
This set replaces both the headlights and taillights on compatible Chevrolet Impala models with plug-and-play assemblies intended as direct factory-quality replacements. Installation is described as bolt-on with no drilling required, so a DIYer can swap the housings and reuse or install the listed bulbs for each function. The headlights feature micro-prism reflectors and chrome internal finishes to improve reflectivity, and the taillights ship with brake, tail, and turn bulbs included. The housings advertise dustproof, waterproof, UV protection, and shock resistance for longer life in wet or salty conditions. Customer feedback shows generally good fit and improved appearance, and a straightforward installation for most owners, though a few buyers reported fitment tightness around certain bulb sockets and isolated durability issues such as clearcoat peeling or internal electrical faults. If you want a full front-and-rear lighting refresh that looks like factory equipment and can be installed at home, these assemblies deliver that at a practical level, but monitor finish and electrical reliability over time.
Best for: Buyers wanting a balanced, full lighting replacement that improves appearance and function without professional installation, and who value a practical, cost-effective OEM-style swap.
Less Ideal for: Drivers looking for long-term premium durability guarantees or those unwilling to inspect and troubleshoot occasional fit or finish issues after installation should consider higher-end or dealer options.
- Vehicle-specific plug-and-play fit for 2006–2013 Impala and 2014–2016 Impala Limited models.
- Headlights use micro-prism reflectors and chrome finish to enhance light reflectivity.
- Taillights include brake, tail, and turn bulbs out of the box for a more complete replacement.
- Housings claim dustproof, waterproof, UV protection, and shock resistance for improved durability.
- Direct bolt-on installation requires no modification for most vehicles.
- Some users reported clearcoat peeling and occasional internal electrical issues after months of use.
- Certain bulb sockets fit tightly and may require extra effort to install bulbs or minor adjustment.
- Fitment can be near-perfect but not universally flawless, requiring some on-vehicle tweaking in a few cases.
Verdict A practical, plug-and-play full front-and-rear lighting replacement for Impala owners who want factory-style looks and easy installation but should watch for occasional finish or electrical issues.
Choosing the Right Chevrolet Impala Tail Light Assembly: Key Factors to Consider
Fitment and Mounting
Accurate fitment matters because tail light assemblies must align with factory mounting points and electrical connectors to avoid gaps that let in water or cause vibration. A poor fit often leads to additional drilling, filler work, or adapter brackets that increase installation time and risk damage to the vehicle body.
Check that the assembly uses the same bolt pattern, tab locations, and connector type as the original Impala component. Confirming fitment up front reduces the chance of returns and ensures the assembly sits flush with the body for correct light projection and a finished appearance.
Lens Material and Optical Clarity
The lens and housing quality directly affects light output and visibility. Look for materials resistant to yellowing, cracking, and clouding from UV exposure and road chemicals, since optical degradation reduces signal brightness and increases stopping distances.
A clear, well-formed lens also maintains correct beam patterns and ensures brake, turn, and running lights are visible from the required angles. Consider the manufacturing tolerances around the lens edge to ensure a uniform seal with the housing and body.
Sealing and Moisture Protection
Good seals and gaskets prevent water and humidity from entering the assembly, which can corrode sockets, fog lenses, and short circuits. Assemblies with robust sealing features reduce the need for frequent resealing or internal repairs.
Inspect the design for continuous gasket material, properly routed venting to equalize pressure, and secure fasteners that maintain clamp load over time. Proper moisture protection also protects bulbs or LED electronics from premature failure.
Electrical Compatibility and Bulb Options
Tail light assemblies must match the Impala's electrical system and socket types to work without additional adapters. Confirm whether the unit accepts the same bulb types or includes compatible LED modules, and whether resistors or wiring harness changes are needed to maintain correct flash rates and brightness.
For LED upgrades, check that the assembly addresses vehicle indicators like load detection or includes circuitry to prevent hyperflashing. Electrical compatibility minimizes wiring complexity and preserves factory safety features.
Durability and Build Quality
A durable assembly withstands temperature swings, vibration, and road debris without cracking or losing alignment. Materials, reinforcement ribs in the housing, and corrosion-resistant fasteners all contribute to longer service life.
Consider the expected lifespan of the lens and housing materials, the quality of internal sockets and wiring, and how well the assembly resists common failure modes like mounting-tab breakage or seal compression over time.
Ease of Installation and Serviceability
An assembly that installs with minimal tools and without body modifications saves time and reduces installation risk. Features like preinstalled gaskets, labeled connectors, and access ports for bulb replacement make future service easier.
Serviceability also includes whether bulbs or LED modules can be replaced separately and how accessible mounting hardware is when the vehicle is on a lift or jack stands. Prioritizing ease of installation reduces labor and helps preserve the vehicle's finish.
FAQ
How do I confirm a tail light assembly fits my Chevrolet Impala?
Match the assembly's listed fitment information to your Impala's model year and check mounting hole patterns and connector types. Reviewing dimensional drawings or fitment diagrams helps, and confirming that the bolt locations and electrical plugs match reduces the chance of unexpected modifications.
Can I switch from incandescent bulbs to LED modules in my Impala tail lights?
You can often upgrade to LED modules, but compatibility depends on socket types and the vehicle's electrical detection systems. Some LED installs require resistors or a dedicated module to maintain correct flash rates and prevent warning indicators, so verify electrical compatibility before making the swap.
What should I inspect for when replacing a tail light lens and housing?
Check the lens for optical clarity, uniformity, and absence of stress cracks, and ensure the housing has intact mounting tabs and secure gasket surfaces. Confirm that vents, seals, and wiring passages are properly formed to prevent moisture intrusion and that replacement bulbs can be accessed without removing the entire assembly.
How do I troubleshoot moisture inside a tail light assembly?
Start by checking seals and gasket seating for gaps or damage and inspect vents for blockages. If the assembly is otherwise intact, remove and dry the interior, then refresh or replace the gasket and ensure fasteners are torqued to maintain even pressure. Persistent moisture may indicate a crack or poor fit that requires a replacement assembly.
Will a replacement tail light assembly affect my Impala's electrical system?
A properly matched assembly should integrate without altering the electrical system. Mismatches in socket type or LED upgrades without proper load simulation can change current draw and trigger warnings or hyperflash. Always confirm electrical compatibility to avoid unintended effects.
How long should a quality tail light assembly last on a Chevrolet Impala?
Lifespan depends on material quality, exposure to UV, and driving conditions, but a well-made assembly typically provides several years of service. Regular inspection of seals, lenses, and mounting hardware helps identify wear early so you can address issues before they affect functionality.
How We Chose the Best Chevrolet Impala Tail Light Assembly
We focused on factors that matter specifically for Chevrolet Impala tail light assemblies to create a practical, reliable shortlist. Primary evaluation criteria included fitment accuracy to the Impala mounting points and connector types, material durability to resist UV, moisture, and road vibration, and optical clarity of the lens and housing for consistent signaling. We also considered installation complexity, the availability of replacement bulbs or LED modules, and the quality of seals and gaskets that prevent water intrusion. Units that required significant body modification or extensive wiring changes were excluded. We did not include assemblies with unclear fitment information, unverified durability claims, or those lacking basic sealing and mounting hardware. The resulting list prioritizes assemblies that balance reliable physical compatibility, straightforward installation, and long-term durability.
Our full evaluation process is outlined in our review methodology.
Conclusion
When replacing a Chevrolet Impala tail light assembly, prioritize accurate fitment, reliable sealing, and durable lens materials to maintain visibility and prevent moisture-related failures. Electrical compatibility and ease of installation are also key tradeoffs: assemblies that fit without modification save time, while LED upgrades may require additional wiring considerations. Balance your priorities between longevity and serviceability, and focus on assemblies that match Impala mounting and connector specifications to reduce installation complexity and long-term maintenance.
Explore More:
- Check out all Chevrolet Impala parts & accessories
- Explore Lighting
- Browse all Auto Parts
