Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Mitsubishi Eclipse develops vibration, uneven tire wear, or a grinding sound from a wheel, replacing the wheel hub assembly can restore safe handling and ride quality. Choosing the right hub assembly matters because fitment, bearing life, and sealing determine how long the repair lasts and how the car behaves on the road.This guide presents seven shortlisted wheel hub assemblies that addressed the most common failure modes. We evaluated each option for fitment accuracy, bearing durability, and sealing performance to help you pick the right replacement. Read on for the key considerations and common symptoms to watch for before you commit to a repair.
Looking for other parts? See all Mitsubishi Eclipse parts & accessories.
Top Picks at a Glance
| Best overall The best all-around choice for most situations | TRQ 4-Piece Wheel Bearing & Hub Assembly Set (Front and Rear) |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Front Wheel Hub and Bearing Assembly Kit (2 pc) for Mitsubishi Eclipse 2006–2012 |  |
| Best Value The sweet spot between price and what you get | SCITOO Front Wheel Hub and Bearing Assembly (pair) |  |
| Best budget The cheapest option that still gets the job done reliably | PAROD Front Wheel Hub and Bearing Assembly 513219 |  |
| Highest Rated A top-rated pick with lots of positive feedback | TRQ Front Wheel Bearing & Hub Assembly Set, 2-Piece |  |
| Most popular A crowd favorite that many people choose with confidence | Detroit Axle Front Wheel Hub and Bearing Assembly for Mitsubishi Eclipse (2006–2012) — 5-Lug |  |
1. TRQ 4-Piece Wheel Bearing & Hub Assembly Set (Front and Rear)
| Quantity | 4 Piece |
|---|---|
| Bearing Type | Ball Bearing |
| Compatible Lubricant | Grease |
| Exterior | Machined |
This TRQ kit supplies two front and two rear pre-assembled wheel bearing and hub assemblies intended as direct replacements for compatible Mitsubishi Eclipse years and trims listed by the manufacturer. Installation is typical for hub swaps: remove the old hub, transfer any needed sensors or studs, and bolt the new assembly in place using factory torque values. Notable features include machined exterior surfaces, ball-type bearings pre-packed for grease compatibility, and TRQ’s DIY video resources to guide owners through installation. Practical benefits include saving time over bearing-and-race jobs because the assemblies arrive ready to install and aim to restore wheel smoothness, reduce noise, and maintain ABS tone wheel speed sensor function when fitment is correct. Limitations include occasional reports of fitment issues with wheel studs or early failures on some vehicle applications, so confirming compatibility for your specific Eclipse year and trim is important; some users also prefer premium-brand bearings for extreme-duty use. Overall the kit offers a convenient mid-range replacement option when the listed fitment matches your Eclipse.
Best for: Buyers who want a balanced, practical replacement that prioritizes convenience and value and who prefer a ready-to-install kit with supporting how-to resources.
Less Ideal for: Drivers who need heavy-duty or race-grade bearings or those unwilling to verify exact year/trim fitment should consider higher-end brands or professional-sourced alternatives.
- Complete four-piece kit includes both front and rear assemblies to replace all wheel hubs at once
- Pre-assembled units simplify installation and reduce labor compared with separate bearing/race jobs
- Machined exterior and ball-bearing construction aimed at restoring quiet operation and stability
- Manufacturer provides DIY installation videos to help independent installers
- Some buyers report incorrect or short wheel studs that required swapping from old hubs
- A few reviews describe early bearing noise or contamination on isolated units indicating variable quality control
- Not positioned as premium heavy-duty bearings for high-load or racing use
Verdict: A convenient, mid-range direct-fit hub and bearing kit that restores wheel function on compatible Mitsubishi Eclipse models while offering good value for DIY installers.
2. Detroit Axle Front Wheel Hub and Bearing Assembly Kit (2 pc) for Mitsubishi Eclipse 2006–2012
| Fitment | Front left and right for listed Mitsubishi models (see description) |
|---|---|
| Lugs | 5 Bolts |
| ABS Type | Non-ABS |
| Quantity | 2 assemblies |
This Detroit Axle kit supplies two front wheel hub and bearing assemblies engineered as factory-style replacements for select Mitsubishi Eclipse, Galant V6, and Endeavor model years. Each assembly arrives preassembled to simplify installation and restore smooth wheel rotation, which makes this a typical repair when bearings are noisy, vibrating, or producing ABS warnings. The listing emphasizes premium bearing steel and high-frequency quenching for improved wear and corrosion resistance, and the hub is offered in a five-lug, non-ABS configuration; seller materials also describe impact and fatigue testing. For a performance-minded buyer the benefit is predictable fit and drivetrain feel after installation, plus the convenience of replacing both sides at once. Limitations include occasional reports of sensor compatibility or early failures on isolated units and the need to verify ABS/sensor requirements for your specific car since this kit is non-ABS and intended for the listed model variants only.
Best for: Performance-oriented owners who prioritize restoring precise wheel control and drivetrain feel with a factory-style replacement kit for specified Mitsubishi Eclipse and related V6 models.
Less Ideal for: Drivers who need ABS-equipped hubs, built-in wheel speed sensors, or who prefer OEM-branded parts and extended manufacturer-backed support should consider alternative factory-quality options.
- Preassembled hub and bearing for faster installation and reduced press-fit work
- Manufactured from high-quality bearing steel with heat treatment for improved wear and corrosion resistance
- Sold as a matched pair so both front sides can be serviced at once
- Built to match factory replacement form and function for the specified Mitsubishi models
- Non-ABS configuration limits fitment to vehicles without ABS tone ring requirements
- Some customer reports note occasional early failures or sensor incompatibility on certain vehicles
Verdict: A matched, preassembled front hub and bearing pair built to factory-style standards to quickly restore wheel performance on specified Mitsubishi Eclipse and V6 models.
3. SCITOO Front Wheel Hub and Bearing Assembly (pair)
| Bearing Type | Ball Bearing |
|---|---|
| Included Components | wheel hub |
| Material Type | Alloy Steel |
| Compatible Lubricant | Grease |
| Unit Count | 2.0 Count |
This SCITOO front wheel hub and bearing assembly is a direct-replacement style unit supplied as a two-pack for front left and right fitment on supported Mitsubishi vehicles. It combines a sealed ball bearing with an integrated hub flange and ABS tone ring where applicable, so installation replaces both the hub and bearing in one operation and restores wheel mounting and ABS sensor function. Typical use is a timed DIY or shop repair when a worn bearing makes noise, shows play, or triggers ABS faults; the preassembled design shortens labor versus pressing in a separate bearing. The listing highlights alloy steel construction, grease compatibility, a protective coating on hub bolts, and factory-spec verification steps claimed by the seller. Expect quieter operation and reduced vibration when the part matches the vehicle and is installed correctly, but some user reports note noise on a small number of units and long-term durability depends on installation and driving conditions. This product is a practical, cost-conscious replacement that favors convenience and lower upfront expense over premium-brand longevity claims.
Best for: Practical optimizers who want an affordable, ready-to-install replacement to restore wheel function and ABS operation without paying for premium aftermarket names; suited to DIYers or independent shops focused on value and quick turnarounds.
Less Ideal for: Buyers seeking a lifetime-grade or dealer-sourced factory replacement with extended durability guarantees should consider higher-end or factory-authorized parts instead.
- Supplied as a matched pair to replace both front hubs at once
- Preassembled hub and bearing reduces labor compared with separate bearing press jobs
- Includes ABS tone ring compatibility where applicable for plug-and-play ABS sensor output
- Alloy steel construction with grease compatibility for standard maintenance
- Some buyers reported loud bearing noise on delivery indicating variable quality control
- Not a branded OEM part so long-term durability can vary between units
Verdict: A cost-conscious, preassembled front hub-and-bearing pair that restores wheel mounting and ABS function with minimal installation effort.
4. PAROD Front Wheel Hub and Bearing Assembly 513219
| Manufacturer | PAROD |
|---|---|
| Manufacturer Part Number | 513219 |
| Vehicle Fitment | Mitsubishi Eclipse 2006-2012; Endeavor 2004-2008, 2010-2011; Galant 2004-2012 |
This PAROD front wheel hub and bearing assembly is a direct replacement unit intended for front axle use on specific Mitsubishi Eclipse, Endeavor, and Galant models. It integrates the bearing and hub into a single ready-to-install unit so you can replace a worn or noisy hub without pressing bearings separately. The listing emphasizes factory-quality performance at a lower cost and several buyer reports note straightforward installation and improved ride smoothness after swap. The assembly is vehicle-tested for fit, and the design supports normal driving loads while restoring wheel alignment and rotation guidance. Limitations to consider are that fasteners are not included so you may need to reuse original bolts or source replacements, and aftermarket fit and long-term durability can vary compared with higher-end parts. For a budget repair this hub offers a practical, easier-to-install solution but those wanting the longest service life or professional-grade longevity may prefer a higher-priced option.
Best for: Budget-conscious buyers looking for an affordable, quick front hub replacement for older Mitsubishi Eclipse-era vehicles who prioritize cost and ease of DIY installation.
Less Ideal for: Drivers seeking a longest-life, heavy-duty or performance-oriented hub solution should consider higher-tier or professional-grade assemblies instead.
- Direct replacement hub-and-bearing unit simplifies installation compared with separate bearings
- Designed and vehicle-tested to match factory fit for listed Mitsubishi front applications
- Lower-cost aftermarket option compared with higher-priced brands
- Users report reduced wheel noise and smoother ride after installation
- Mounting bolts are not included with the assembly
- Long-term durability may be less predictable than premium brands
Verdict: A cost-effective, vehicle-tested front hub-and-bearing assembly that restores smooth wheel operation for listed Mitsubishi models but ships without mounting bolts and may not match premium longevity.
5. TRQ Front Wheel Bearing & Hub Assembly Set, 2-Piece
| Included Components | 2 Piece Wheel Bearing & Hub Assembly Set |
|---|---|
| Bearing Type | Ball Bearing |
| Brand Name | TRQ |
| Specification Met | ISO 16949 |
This TRQ kit supplies both front driver and passenger wheel bearing and hub assemblies as a direct-fit replacement intended for older Mitsubishi Eclipse and related models. Each hub comes pre-assembled with ball bearings designed to reduce noise and vibration and to restore front-end stability and wheel alignment. Typical use is a like-for-like repair when worn bearings cause rumble, play, or ABS warning codes; the pair format saves a second purchase when both sides need service. Notable features include pre-assembled components for quicker installation, ISO 16949 specification compliance, and a broad compatibility list that covers many mid-1990s to mid-2000s platforms. Practical benefits are time saved in the shop or DIY bay, eliminated bearing press work, and the inclusion of both sides in one kit. Limitations to consider are mixed long-term durability reports in some user feedback and the ABS sensor is not included so the vehicle's original sensor must be reused or sourced separately.
Best for: Reliability-focused owners who prioritize restoring safe, quiet front-end operation with a pre-assembled, direct-fit repair and prefer minimizing shop time and complexity.
Less Ideal for: Buyers who need a replacement that includes new ABS sensors or who prefer parts with long-term proven service history from a dealer-sourced hub should consider other options.
- Sold as a driver and passenger pair so both sides can be serviced at once.
- Pre-assembled hub assemblies speed up installation and avoid bearing press work.
- Meets ISO 16949 specification indicating factory-level quality processes.
- Multiple fitment references cover common Mitsubishi Eclipse and similar late 1990s to mid-2000s models.
- ABS sensor is not included and must be transferred from the old unit or purchased separately.
- Some reviewers report early failures on a minority of units, indicating variable long-term durability.
Verdict: A ready-to-install, ISO-rated two-piece front hub and bearing set that gets aging Mitsubishi Eclipse front hubs replaced quickly and affordably.
6. Detroit Axle Front Wheel Hub and Bearing Assembly for Mitsubishi Eclipse (2006–2012) — 5-Lug
| Position | Front Left or Right |
|---|---|
| Lugs | 5 Bolts |
| ABS Type | Non-ABS |
| Flange | 4-Bolt Square |
This Detroit Axle front wheel hub and bearing assembly replaces the complete front hub on 2006–2012 Mitsubishi Eclipse V6 models and comes preassembled with the bearing and studs. Installation is straightforward for a DIYer or independent shop because the unit drops in where the original hub was mounted and uses the vehicle's factory bolt pattern and five lugs. Notable features include a preinstalled bearing to avoid pressing operations, a 4-bolt square flange, and non-ABS fitment for the listed models. In practice the assembly quiets steering and wheel noise immediately and restores proper wheel runout without having to service the old bearing. Users report reliable factory-quality fit and long-term durability after installation, though some buyers have had issues with packaging and sensor connector protection during shipping. Expect to follow factory torque specs and basic wheel-bearing removal steps; this product simplifies replacement but does not remove the need for correct installation practice.
Best for: Convenience-minded buyers who want a ready-to-install, factory-replacement front hub for a Mitsubishi Eclipse V6 so they can complete the job quickly with minimal additional machining or press work.
Less Ideal for: Drivers who need an ABS-equipped hub or workshops that require remanufactured cores and exact OEM sensor integration should consider a different hub option.
- Preassembled hub and bearing eliminates the need for pressing in a new bearing
- Direct-fit replacement for 2006–2012 Mitsubishi Eclipse V6 front with factory-style 5-lug pattern
- Restores quiet operation and corrects wheel play and runout
- Backed by long-term warranty coverage from the brand
- Non-ABS version only, so it will not fit vehicles that require an ABS-equipped hub
- Occasional reports of inadequate packaging that can damage connectors during transit
Verdict: A convenient, preassembled front hub that restores quiet, solid wheel operation on 2006–2012 Mitsubishi Eclipse V6 models, provided your car uses a non-ABS front hub.
Choosing the Right Mitsubishi Eclipse Wheel Hub Assembly: Key Factors to Consider
Fitment and Mounting Compatibility
Accurate fitment is essential because a hub assembly must align precisely with the spindle, knuckle, and brake rotor. Mismatched bolt patterns, bearing offset, or improper mounting flange thickness can cause rotor runout and uneven brake wear.
Confirming bolt pattern, mounting hole locations, and integrated sensor provisions ensures the replacement seats the same way as the factory unit. Proper fitment reduces the need for additional machining or adapters and helps maintain steering geometry and wheel alignment.
Bearing Type and Load Rating
The bearing inside the hub assembly carries vehicle loads and transmits torque during acceleration, braking, and cornering. Bearings with higher load ratings and robust internal design typically last longer under normal driving and resist fatigue.
Look for specifications on dynamic and static load capacity and whether the assembly uses tapered rollers, ball bearings, or an integrated hub bearing cartridge. Bearing choice affects noise, longevity, and how the assembly handles repeated stresses.
Seal and Contaminant Protection
Effective seals keep water, road salt, and grit away from the bearing surfaces. Once contaminants enter a bearing, lubrication breaks down and wear accelerates, which often leads to noise and premature failure.
Assess the quality of lip seals, shield placement, and whether the assembly comes pre-lubricated and sealed from the factory. Good sealing reduces maintenance needs and helps maintain consistent bearing performance across varied driving conditions.
Pre-assembled Vs Serviceable Design
Pre-assembled hub assemblies come with the bearing pressed in and typically ready for direct installation. This reduces install time and the need for specialized pressing tools. Serviceable designs allow bearing replacement or reuse but may require more mechanical skill and tooling.
Consider your access to tools and whether you prefer a quick swap or a rebuildable option. For many owners, pre-assembled units minimize installation risk and ensure correct bearing pre-load and torqueing without specialized equipment.
ABS Sensor Integration and Wiring
Many modern hub assemblies include provision for an ABS sensor or an integrated tone ring. Proper sensor alignment and signal clarity are necessary to avoid ABS or traction control warnings and ensure reliable wheel speed data.
Verify whether the assembly includes an ABS tone ring, the correct sensor mounting, or a compatible wiring connector. Mismatches here can lead to dashboard warnings or require additional adaptors and reprogramming in some vehicles.
Durability and Warranty Coverage
Durability considerations include material quality of the hub flange and bearing components, corrosion resistance, and manufacturer warranty or support. A longer warranty often indicates greater confidence in manufacturing quality.
Check for corrosion-resistant coatings, hardened bearing surfaces, and any stated expected service life. Warranty terms and what they cover can affect long-term ownership costs and give insight into expected reliability under normal driving.
How We Chose the Best Mitsubishi Eclipse Wheel Hub Assembly
We prioritized parts that match the Mitsubishi Eclipse chassis and suspension mounting points to ensure straightforward fitment and consistent alignment. Our editorial filters focused on fitment fidelity, bearing construction and load rating, seal quality against contaminants, and ease of installation including pre-assembled versus serviceable designs. We also considered available information on expected service life under typical driving conditions and any included hardware or instructions that reduce installation errors.We excluded assemblies that lacked clear fitment documentation for the Mitsubishi Eclipse or had ambiguous bearing specifications. Also omitted were options with known warranty or manufacturing quality concerns. The resulting shortlist reflects components that meet measurable mechanical criteria relevant to hub assemblies rather than marketing claims.
Our full evaluation process is outlined in our review methodology.
FAQ
What symptoms indicate my Mitsubishi Eclipse needs a wheel hub assembly replacement?
Common signs include a grinding or growling noise from a wheel that changes with vehicle speed, vibration through the steering or floor, uneven tire wear, or a loose feeling at the wheel. You may also see an ABS warning if the tone ring or sensor is damaged. Symptoms usually develop gradually and often worsen over time.
Can I replace just the bearing or should I replace the entire hub assembly?
It depends on the design. Some hubs are serviceable and allow bearing replacement, but many modern assemblies are pre-assembled and sealed. Replacing the entire hub assembly can be faster and avoids the need for pressing tools, while a rebuildable approach can save cost if you have the necessary tools and experience.
How can I tell if the hub noise is from the bearing or another component?
Bearing-related noise usually correlates with vehicle speed and may change character when turning left or right. Other sources like tires, brakes, or suspension can create similar noises. A controlled test drive and lifting the vehicle to spin the wheel by hand while listening and checking for play can help isolate the hub bearing as the source.
Are there installation tips specific to hub assemblies I should follow?
Ensure proper torque on axle nuts and mounting bolts to obtain correct bearing preload and secure mounting. Use the vehicle manufacturer torque specifications where available and replace any single-use fasteners. Clean mating surfaces, inspect the knuckle and studs for damage, and avoid hammering on the bearing race to prevent premature failure.
Will replacing a single hub assembly affect wheel alignment or handling?
Replacing a single hub assembly should not inherently alter wheel alignment if the new unit matches original fitment and mounting surfaces are clean and undamaged. However, if the hub replacement corrects worn components, you may notice improved handling. It is a good practice to check alignment after any suspension or hub service.
How long does a typical wheel hub assembly last on a vehicle like the Mitsubishi Eclipse?
Lifespan varies with driving conditions, maintenance, and seal effectiveness. Under normal driving, a properly installed, quality hub assembly often lasts many years or tens of thousands of miles, but exposure to water, road salt, or rough roads can shorten service life. Regular inspections for play and noise help catch issues early.
Conclusion
When choosing a Mitsubishi Eclipse wheel hub assembly, prioritize accurate fitment, bearing load capacity, and robust sealing to ensure long service life and reliable handling. Decide between a pre-assembled unit for ease of installation or a serviceable design if you have the tools and prefer a rebuildable option.Balance durability and installation practicality against the likely driving conditions the vehicle will see. Paying attention to ABS integration, correct torque procedures, and warranty terms will help you select a hub assembly that minimizes downtime and delivers consistent performance.
Explore More:
- Check out all Mitsubishi Eclipse parts & accessories
- Explore Wheel Hub Assemblies Maintenance & Repair Guides
- Explore Wheels & Tires
- Browse all Auto Parts
