Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Honda CR-V is showing extra vibration, clunks during acceleration, or unusual engine movement under load, replacing the passenger side engine mount can restore quiet operation and protect drivetrain components. Choosing the right passenger side engine mount matters because fit, material, and durability directly affect NVH, alignment, and longevity on this vehicle.This guide covers seven shortlisted passenger side engine mounts chosen for fitment and longevity on the Honda CR-V. We evaluate each option against common failure modes, installation practicality, and how well the mount controls vibration and movement under typical driving conditions.
Looking for other parts? See all Honda CR-V parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | BEBLEPANY 4‑Piece Engine and Transmission Mount Set for 2017–2022 Honda CR‑V |  |
| Best Quality Built to a higher standard if you want something more solid | Sixity Auto Right Hydraulic Engine Mount for Honda CR-V (2012–2016) |  |
| Best Value The sweet spot between price and what you get | Yllhaoyuan Complete 5-Piece Motor Mount Set for 2007–2011 Honda CR-V 2.4L |  |
| Best Budget The cheapest option that still gets the job done reliably | Marketplace Auto Parts Front Right Engine Mount for 2002–2006 Honda CR-V |  |
| Highest Rated A top-rated pick with lots of positive feedback | Kinwrdsn Engine Motor Mount Kit for Honda CR-V 2007–2011 (2.4L) |  |
| Most Popular A crowd favorite that many people choose with confidence | SHICHU 5-Piece Engine Motor Mount Set for 2007–2011 Honda CR-V 2.4L |  |
| Best Seller A high-volume bestseller chosen again and again | SHICHU Engine Motor Mount Set for 2002–2006 Honda CR-V 2.4L (4-piece) |  |
1. BEBLEPANY 4‑Piece Engine and Transmission Mount Set for 2017–2022 Honda CR‑V
| Compatibility | 2017–2022 Honda CR‑V 1.5L L4 Auto; 2017–2019 Honda CR‑V 2.4L L4 Auto |
|---|---|
| Set composition | 4 pieces (transmission mount + 3 engine mounts) |
| Manufacturer | BEBLEPANY |
| Model number | MY1K0258 |
This four-piece BEBLEPANY mount kit replaces the transmission mount and three engine torque/engine mounts on compatible Honda CR‑V models to restore stability and reduce vibration and shift clunking. Intended as a direct-replacement design, each part uses factory mounting points and original bolts for a straightforward bolt-on install during routine service. The set pairs reinforced steel brackets with rubber isolators engineered to balance durability and vibration damping; that helps quiet idling, smooth out gear engagement, and limit visible engine movement when accelerating or shifting. Because the kit replaces all major mounts at once, it evens load distribution so a single weak mount does not overload new parts. Expect typical aftermarket fitment variability: most buyers report easy install and immediate noise reduction while a minority report quality or longevity concerns compared with factory parts. This kit is a cost-effective option for restoring normal NVH and drivability on the passenger-side and related mounts, but those seeking longest-lasting, premium OE-matching components may prefer higher-end replacements.
Best for: Buyers looking for an affordable, complete replacement to stop engine movement and shifting clunks on a daily-driven Honda CR‑V and who prioritize restoring normal NVH and drivability over premium OEM longevity.
Less Ideal for: Drivers planning long-term, high-mileage ownership who prefer factory-quality, heavy-duty mounts or who need mounts rated for modified or high-performance engines.
- Vehicle-specific fitment for 2017–2022 CR‑V 1.5L and 2017–2019 CR‑V 2.4L reduces fitment guesswork
- Included set replaces both transmission and multiple engine mounts for balanced load distribution
- Direct-replacement design uses original hardware for a straightforward bolt-on installation
- Steel bracket construction combined with engineered rubber aims to reduce vibration and shift clunking
- Aftermarket build quality varies in user reports so longevity may be shorter than higher-end factory replacements
Verdict: A practical, cost-conscious complete mount kit that restores engine stability and reduces clunking for compatible Honda CR‑V models.
2. Sixity Auto Right Hydraulic Engine Mount for Honda CR-V (2012–2016)
| Vehicle fitment | Honda CR-V 2012–2016 Right (FWD/AWD) |
|---|---|
| Mount type | Hydraulic engine mount |
| Brand | Sixity Auto |
This Sixity Auto hydraulic engine mount replaces the passenger-side mount on 2012–2016 Honda CR-Vs and is intended as a direct factory-quality swap. It installs where the original hydraulic mount isolates engine vibration and controls fore-aft and rotational movement, so drivers should notice restored smoothness and reduced transmission of engine shake to the cabin compared with a worn mount. The part lists as compatible with both FWD and AWD CR-Vs and arrives with original-style packaging and hardware for bolt-in installation. For performance-minded buyers this mount retains the stock hydraulic damping that helps maintain predictable engine movement under load and during gear changes, which supports consistent throttle response and shifting feel. Limitations are that it is a replacement hydraulic unit rather than a stiffer performance or solid mount, so it does not increase engine rigidity or offer the harsher feel some tuners prefer. Buyers should also confirm exact fitment before ordering and follow torque specs during installation.
Best for: Owners who want a factory-style passenger-side replacement that restores stock vibration control and maintains predictable engine movement for everyday and spirited driving.
Less Ideal for: Drivers seeking a stiffer performance or solid mount to minimize engine movement for track use or heavily modified engines should consider aftermarket performance mounts instead.
- Direct replacement designed for passenger/right side fitment on 2012–2016 Honda CR-Vs.
- Hydraulic design preserves factory vibration damping for a smoother cabin and consistent shift feel.
- Includes original-style packaging and hardware for straightforward bolt-in installation.
- Not a performance or solid mount so it will not increase engine stiffness or reduce drivetrain movement for aggressive driving.
Verdict: Choose this hydraulic replacement when you want a factory-style passenger-side mount that restores stock vibration damping and consistent drive feel.
3. Yllhaoyuan Complete 5-Piece Motor Mount Set for 2007–2011 Honda CR-V 2.4L
| Fitment | 2007–2011 Honda CR-V 2.4L L4 |
|---|---|
| Pieces included | 5 motor/transmission mounts |
| Manufacturer | Yllhaoyuan |
This kit supplies all five critical engine and transmission mounts for a full drivetrain refresh on 2007–2011 CR-Vs with the 2.4L L4. It replaces the front and rear motor mounts, upper and lower torque strut mounts, and the transmission mount so you can swap the entire mounting system at once rather than piecemeal. The parts are marketed as direct factory-fit replacements with cross-referenced part numbers, and customer reports show many installs bolt up with no modification and noticeably reduce vibration, harsh idling, and engine movement. Construction is described as reinforced for SUV duty, which should help heat and road-stress resistance compared with softer aftermarket mounts. Expect this as a practical DIY option or a quick shop job since replacing the full set avoids repeated labor. Quality appears mixed in reviews: several buyers praise fit and durability while a minority report fitment or manufacturing defects on individual pieces, so careful inspection at installation is advised.
Best for: A practical buyer who wants to eliminate persistent engine vibration by replacing the entire mounting system at once and prefers a DIY-friendly, factory-fit solution that minimizes future shop visits.
Less Ideal for: Not the best choice for someone who only needs a single mount replaced and wants an exact OEM-sourced part with guaranteed factory inspection before delivery.
- Complete five-piece kit covers all major engine and transmission mounting points for a one-step vibration fix
- Designed to match factory mounting points with listed cross-reference part numbers for direct bolt-on fit
- Reinforced construction aims to improve resistance to heat and road stress for SUV use
- Reduces cabin vibration, harsh idling, and driveline movement when all mounts are replaced together
- Some buyers reported manufacturing defects or incorrect dimensions on individual pieces requiring rework or replacement
- Fitment is mixed across reports so parts should be inspected before installation
Verdict: Replace all five mounts with this complete kit to quickly and cost-effectively eliminate the vibration and driveline movement common to 2007–2011 CR-V 2.4L models.
4. Marketplace Auto Parts Front Right Engine Mount for 2002–2006 Honda CR-V
| Fitment | 2002-2006 Honda CR-V |
|---|---|
| Position | Front right passenger side |
This front right engine mount is a direct replacement part made to fit 2002–2006 Honda CR-Vs and restores the engine's proper positioning while reducing vibration and noise felt in the cabin. It is typically used during routine maintenance or when worn mounts cause excessive movement, clunking, or driveline vibration. The product listing highlights fitment for the passenger side and includes the mounting points needed to swap with the original unit. For a budget-focused repair this mount provides a straightforward way to get a worn or failed mount back to service without modifying other components. Expect standard installation steps: lifting the engine slightly, removing fasteners, and transferring the new mount into place. Limitations are that this is a single passenger-side unit so the driver-side or rear mounts may still be worn, and buyers should verify exact fit with their vehicle's VIN or parts diagram before installation.
Best for: Buyers looking to repair vibration or engine movement on a 2002–2006 Honda CR-V without spending on dealer parts and who prioritize a straightforward, budget-friendly replacement.
Less Ideal for: Shoppers wanting a full-engine-mount overhaul or heavy-performance upgrades should consider a complete set or reinforced mounts instead.
- Made specifically to fit 2002–2006 Honda CR-V front right passenger side
- Restores engine alignment and reduces vibration and cabin noise
- Simple direct-replacement design compatible with standard installation procedures
- Lower-cost option suitable for budget-conscious repairs
- Sold as a single passenger-side mount so additional mounts may still need replacement
Verdict: A cost-conscious, vehicle-specific front right replacement that gets a 2002–2006 CR-V back to normal ride feel without complicating the repair.
5. Kinwrdsn Engine Motor Mount Kit for Honda CR-V 2007–2011 (2.4L)
| Fitment | Honda CR-V 2007–2011 2.4L L4 |
|---|---|
| Kit contents | Front right motor mount, front upper torque strut, front lower torque strut, transmission mount, rear differential mount |
| Material Type | Metal |
| Manufacturer Warranty Description | 30 days from date of purchase |
This Kinwrdsn kit supplies the front right motor mount plus upper and lower torque strut mounts, a transmission mount, and a rear differential mount tailored for Honda CR-V 2007–2011 2.4L engines. It is intended to replace worn rubber and metal mounts that cause vibration, engine movement, and added stress to drivetrain components. Typical use is a full front-side mount refresh during a repair or when multiple mounts show age-related deterioration; installing all five pieces together helps rebalance engine positioning and reduce vibration felt in the cabin. The kit lists multiple interchange numbers so it matches factory mounting locations, and the metal construction suggests a durable, serviceable part. Limitations include a 30-day manufacturer warranty and the need to verify fitment against exact vehicle details before ordering. Buyers should also plan for professional installation or access to proper tools since mount replacement requires lifting and alignment steps.
Best for: Buyers who prioritize restoring stable, low-vibration operation and want a coordinated set of mounts to replace aging or failing components on a 2007–2011 CR-V. This fits owners who prefer addressing multiple related mounts at once for a reliable driving feel.
Less Ideal for: Drivers looking for a single, one-off replacement part or those wanting extended manufacturer support should consider alternatives; this kit also is not aimed at cosmetic updates or performance-modified engines.
- Complete five-piece kit covers front right motor mount, upper and lower torque struts, transmission mount, and rear differential mount
- Matches multiple OEM interchange part numbers for direct fitment to specified CR-V years
- Metal construction intended to restore solid engine support and reduce vibration transmission to the cabin
- Manufacturer warranty period is short at 30 days
- Installation requires lifting the engine or vehicle and alignment skills not suitable for a basic DIY without tools
Verdict: Choose this five-piece kit when you want a coordinated, factory-aligned replacement that restores stable engine support and reduces vibration on a 2007–2011 Honda CR-V.
6. SHICHU 5-Piece Engine Motor Mount Set for 2007–2011 Honda CR-V 2.4L
| Compatible models | 2007–2011 CR-V 2.4L |
|---|---|
| Set contents | Front right, transmission, rear differential (4WD), 2 torque strut mounts |
| Material Type | Alloy Steel, Aluminum, Carbon Steel |
| Unit Count | 5.0 Count |
| Manufacturer Model Number | CF4595 |
This SHICHU 5-piece engine motor mount set replaces the major mounts that secure and isolate the engine in 2007–2011 CR-V 2.4L models. The kit includes a front right mount, a transmission mount, a rear differential mount specified for 4WD, and two torque strut mounts to restore engine stability and reduce vibration. In real use the alloy steel, aluminum, and carbon steel construction appears durable and many buyers report straightforward fitment and noticeably reduced engine movement after installation. Because it is a complete set you can replace all worn mounts at once rather than mixing old and new pieces, which helps restore ride comfort and drivetrain alignment. Some buyers found small dimensional differences or missing studs compared with factory parts that required minor adjustments during install, so expect possible extra fitting or hardware work on vehicles with tight clearances. For a DIYer or independent shop this kit is a practical, cost-effective alternative to buying individual factory mounts.
Best for: Buyers who prioritize social proof and want a full replacement set that other owners have used successfully to reduce vibration and restore engine stability, and who are comfortable doing or overseeing installation with occasional minor adjustments.
Less Ideal for: If you want an exact factory-identical part with guaranteed bolt-for-bolt match or you prefer a single OEM replacement piece, this aftermarket kit may not be the best choice.
- Complete five-piece set replaces all main engine and torque strut mounts for one coordinated repair
- Materials include alloy steel, aluminum, and carbon steel for solid construction
- Many users report good fit and reduced engine vibration after installation
- Includes a rear differential mount option for 4WD applications so kit is more comprehensive
- Some units may differ slightly from factory dimensions or lack certain studs requiring minor modification or extra fasteners during installation
- Rear differential mount is specified as 4WD only, so fitment varies by drivetrain configuration
Verdict: A practical, value-oriented five-piece mount kit that many owners report fits well and noticeably reduces engine vibration when replacing all worn mounts at once.
7. SHICHU Engine Motor Mount Set for 2002–2006 Honda CR-V 2.4L (4-piece)
| Unit Count | 4.0 Count |
|---|---|
| Manufacturer | SHICHU |
| Size | 2002-2006 CR-V 2.4L |
| Part Number | CF4504 |
This SHICHU kit supplies the four mounts commonly replaced together when engine movement or vibration becomes noticeable on an early 2000s CR-V. The set includes front right, front, rear engine mounts and the left transmission mount sized for the 2.4L automatic, so you can swap all aging rubber mounts at once rather than replacing items piecemeal. Install is typical for engine mounts: access under the hood and chassis, support the engine, unbolt the old mounts and fit the new cast pieces. Buyers report correct fits for most cars and straightforward installs when bolts line up, though a few users had to tweak fasteners or replace bolts where threads differed. The parts appear to restore firmness and reduce play compared with worn originals, and the kit covers all mounting points a DIYer or independent shop would replace in one service. Expect the benefits of a complete refresh but be prepared to check bolt compatibility and alignment during installation since fitment can vary slightly on some cars.
Best for: A cautious CR-V owner who values replacing all aging mounts at once to eliminate engine vibration and avoid repeated trips to the shop; this kit suits DIYers and independent mechanics who will verify fitment and fasteners before final torquing.
Less Ideal for: Not the best choice for someone who wants an exact factory-branded part or guaranteed bolt interchangeability without any adjustment; professional dealers seeking OEM-labeled replacements should look elsewhere.
- Complete four-piece set covers front right, front, rear engine mounts and left transmission mount so all common mounting points are refreshed at once
- Sold as vehicle-specific fitment for 2002–2006 CR-V 2.4L automatic transmissions which simplifies selection
- Multiple buyers report straightforward installation and restored engine stability compared with worn mounts
- Some users reported imperfect alignment or different thread sizes requiring new bolts or minor modification
- Quality and fit vary slightly between units so careful inspection and trial fit are advisable
Verdict: Buy this kit if you want a complete, vehicle-specific set to restore engine stability on a 2002–2006 CR-V 2.4L without replacing mounts one at a time.
Choosing the Right Honda CR-V Passenger Side Engine Mount: Key Factors to Consider
Fitment and Bolt Pattern
Correct fitment is essential because the passenger side engine mount must align precisely with the CR-V's factory mounting points. A mismatched bolt pattern or incorrect bushing offset can cause misalignment, accelerated wear on adjacent mounts, and increased drivetrain stress.
When evaluating fitment, confirm the mount's bolt hole spacing, stud diameter, and whether any alignment dowels match the vehicle. For many owners, a direct-fit mount that requires no modification or additional brackets reduces installation time and the risk of vibration caused by poor seating.
Bushing Design and NVH Control
The bushing design—solid rubber, hydraulic, or urethane—determines how well the mount isolates engine movement and absorbs vibration. Passenger side mounts often bear lateral and fore-aft loads, so the right compound and geometry will reduce engine movement during acceleration and minimize cabin vibration.
Consider whether a stiffer urethane bushing is acceptable for your driving preferences. Stiffer mounts improve engine control but can transmit more vibration. Hydraulic or calibrated rubber bushings typically provide a better balance for daily driving and long-distance comfort on the CR-V.
Durability and Resistance to Contaminants
Engine mounts can fail prematurely if rubber compounds degrade from oil exposure, coolant leaks, or high underhood temperatures. A mount rated for oil resistance and constructed from higher-grade materials will generally outlast basic replacements.
Think about the vehicle's service history. If your CR-V has had minor leaks or operates in hot climates, choose a mount with proven resistance to heat and fluids to avoid early separation, cracking, or collapse of the bushing material.
Installation and Required Tools
Installation complexity affects both cost and the likelihood of correct installation. Some passenger side mounts are accessible and replaceable with standard hand tools and a torque wrench, while others require engine support or additional clearance removal.
Assess whether the mount requires engine support, specialty pullers, or access from under the vehicle. Availability of clear installation instructions, included hardware, and standard torque specifications will reduce installation time and the chance of improper tightening that can cause noise or premature failure.
Load Capacity and Bracket Strength
The passenger side mount must handle the engine's static and dynamic loads without excessive deformation. Bracket thickness, weld quality, and mounting thread integrity are all important because a weak bracket can bend or crack under torque events.
Look for mounts with reinforced brackets and corrosion-resistant coatings. Strong mounting hardware ensures the mount transfers loads properly and preserves engine alignment, which affects drivetrain wear and transmission shift quality.
Longevity and Warranty Support
Warranty length and the manufacturer's stated lifespan are useful indicators of expected reliability. A longer warranty suggests confidence in the mount's construction and can provide peace of mind for owners planning to keep the CR-V long term.
Review warranty terms for coverage of material failure and installation defects. Keep in mind that proper installation and addressing underlying issues like oil leaks are necessary to realize the warranty's benefit and prolong the mount's service life.
Common Symptoms That Point to a Bad Passenger Side Mount
Several driveability and noise symptoms typically indicate the passenger side engine mount is compromised. Owners often notice increased vibration at idle, a clunk or bang when accelerating or shifting into gear, and visible engine movement when revving the motor with the vehicle in park.
Vibrations are often felt through the floor or passenger side of the cabin and may be more noticeable during cold starts. Intermittent noises that change with engine load or when transitioning from idle to throttle are also common signs that the mount is no longer controlling motion as designed.
- Vibration felt through passenger footwell or dash at idle
- Clunking or banging during acceleration or gear changes
- Visible engine rock or movement when revving in park
- Noise that varies with engine load and disappears when unloaded
Diagnosing Mount Condition on a Honda CR-V
A basic diagnosis can be done visually and with a few simple tests. Inspect the mount for torn rubber, crushed bushing material, or fluid leaks around hydraulic-style mounts. Check for loose or missing mounting bolts and any deformation of the metal bracket.
Operational checks include applying moderate throttle while the vehicle is safely secured and observing engine movement, or using a pry bar to apply slight leverage to the engine near the mount while watching for excessive play. If you are unsure about torque specs or safety procedures, stop and consult a repair manual or professional.
- Visual check for torn rubber, cracked bushings, and bracket damage
- Observe engine movement under controlled throttle to reveal excess play
- Verify all mount bolts are torqued to specification and not loose
When To Replace Versus When To Inspect Other Causes
Replacement is justified when the passenger side mount shows clear physical damage, significant fluid loss from a hydraulic mount, or when diagnostic checks reveal more than minimal engine movement. In those cases, the mount is unlikely to recover and replacement prevents collateral damage to other mounts or drivetrain parts.
However, some symptoms may be caused by adjacent issues such as misfires, transmission mounts, or exhaust hangers. If the mount shows only minor surface cracking but symptoms are severe, inspect for oil leaks, engine misfire codes, or loose accessories that can mimic mount failure.
- Replace when bushing is torn, fluid is leaking, or movement exceeds normal limits
- Inspect for oil leaks and misfires before replacing an otherwise intact mount
- Consider replacing companion mounts if the vehicle has high mileage or multiple failing points
Maintenance Tips to Prolong Mount Life
Regular underhood inspections and prompt repair of oil or coolant leaks will prevent premature bushing degradation. Keep mount hardware clean and ensure mounting bolts remain torqued to specification during routine maintenance intervals.
Avoid prolonged aggressive driving and hard launches when possible, because repeated high-torque events accelerate wear. If you notice shifting behavior or unusual noises after a recent service, recheck mount torque and installation to catch early issues.
- Check for fluid leaks at every oil change
- Inspect mounts visually at routine service intervals
- Torque mount bolts to specified values after any removal or service
Installation Considerations and Torque Guidance
Passenger side engine mount replacement typically requires supporting the engine and removing a small number of bolts. Follow the vehicle-specific torque specs and tightening sequence to ensure proper seating and avoid introducing preload or misalignment. Improper torque can lead to noise or premature failure.
If you plan to install the mount yourself, have a good jack or engine support, correct torque wrench, and clear access to the fasteners. When in doubt, consult the CR-V service manual for thread sizes and torque values.
- Support the engine before removing mount bolts to prevent stress on other mounts
- Use a calibrated torque wrench and follow the specified tightening sequence
- Inspect threads and hardware; replace any corroded bolts or captured nuts
Still looking for the perfect fit?
Select your Honda CR-V configuration to see the most relevant Engine Mounts recommendations
How We Chose the Best Honda CR-V Passenger Side Engine Mount
We focused on criteria that matter for passenger side engine mounts on the Honda CR-V, prioritizing fitment, material construction, vibration control, installation practicality, and longevity. Fitment was verified against factory mounting points and common CR-V model years to ensure bolt pattern and bushing geometry match the vehicle. Material construction assessed rubber compound or hydraulic bushing design and mounting bracket quality to predict NVH performance and resistance to oil or heat degradation.Durability considerations included expected service life under mixed city and highway driving and resistance to common failure causes such as oil contamination or cracked bushings. Installation practicality covered bolt access, required torque specifications, and whether the mount supports straightforward replacement with common hand tools. Warranty and manufacturing quality control were used as proxies for consistency.We excluded options with unclear fitment, ambiguous materials, or lacking basic hardware necessary for a direct swap. We did not include comparative performance testing figures but used the criteria above to select mounts likely to deliver reliable, quiet operation for CR-V owners.
Our full evaluation process is outlined in our review methodology.
FAQ
How long does a passenger side engine mount usually last on a CR-V?
Mount life depends on driving conditions and exposure to contaminants, but they commonly last many years or tens of thousands of miles. Severe oil leaks, aggressive driving, or cold climates can shorten service life, so inspect mounts periodically.
Can I drive with a failing passenger side mount?
You can drive short distances carefully, but continued use risks additional damage to other mounts and drivetrain components. Excessive engine movement may affect transmission shift feel and exhaust alignment, so schedule a replacement when feasible.
Are aftermarket passenger side mounts as reliable as factory-style units?
Aftermarket mounts vary in design and material quality. Some aftermarket units match factory specifications closely and perform well, while lower-quality options may use inferior materials. Evaluate construction, material ratings, and warranty when choosing.
Will replacing just the passenger side mount fix vibration issues?
Replacing a worn passenger side mount often reduces vibration, but vibration can have multiple causes. If other mounts are near end of life or there are engine performance issues, you may need additional repairs to fully resolve NVH.
Do I need special tools to replace the passenger side mount on a CR-V?
Most jobs require an engine support or jack and a set of standard hand tools plus a torque wrench. Some installations are straightforward, but restricted access or seized fasteners can increase complexity and require additional tools.
What symptoms indicate a hydraulic mount has failed versus a solid rubber mount?
Hydraulic mount failure often shows as increased low-frequency vibration and may include visible fluid leaks, while a solid rubber mount typically shows torn or cracked material and more abrupt clunking during torque events. Both types degrade and produce similar movement symptoms.
Final Verdict
When selecting a passenger side engine mount for your Honda CR-V, prioritize correct fitment, bushing design that matches your comfort preferences, and materials that resist oil and heat. Factor in installation complexity and whether companion mounts should be inspected or replaced at the same time.Balancing durability and NVH control will deliver the best real-world outcome: reduced vibration, stable engine alignment, and fewer follow-up repairs. Choose a mount that meets the CR-V's specifications and offers clear installation guidance so you can be confident in the repair.
Explore More:
- Check out all Honda CR-V parts & accessories
- Explore Engine Mounts Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
