Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you own a 2013-2017 Honda Accord and want a lower stance, better cornering, and reduced body roll, choosing the right lowering springs matters. These springs change ride height, spring rate, and suspension geometry in ways that affect daily comfort, tire wear, and alignment needs. You need options that match your driving priorities whether you use the car for commuting, occasional spirited driving, or weekend autocross.This guide covers six shortlisted lowering springs designed for the 2013-2017 Accord. We evaluate each option for expected drop, ride quality, compatibility with factory shocks, and installation considerations to help you pick the right match for your goals. Next up: the top candidates and what makes each one suitable for this vehicle.
Looking for other parts? See all Honda Accord parts & accessories.
Top Picks at a Glance
| Best Quality Built to a higher standard if you want something more solid | Eibach PRO-KIT Lowering Coil Spring Kit (compatible with Honda Accord 2013–2017) | ![]() |
| Best Value The sweet spot between price and what you get | Truhart Lowering Springs for 2013+ Accord (2.0" Front / 2.1" Rear) | ![]() |
| Best Budget The cheapest option that still gets the job done reliably | BFC Manzo Performance Lowering Springs Kit LSAC-1316 for 2013–2016 Accord | ![]() |
| Highest Rated A top-rated pick with lots of positive feedback | D2 Pro Lowering Springs for 2013+ Accord (Lower, Progressive-Rate) | ![]() |
| Most Popular A crowd favorite that many people choose with confidence | Godspeed Traction-S Lowering Springs for 2013–2017 Honda Accord | ![]() |
1. Eibach PRO-KIT Lowering Coil Spring Kit (compatible with Honda Accord 2013–2017)
| Brand | Eibach |
|---|---|
| Model | PRO-KIT |
| Compatibility | Honda Accord 2013-2017 |
| Finish | Powder Coat |
| Item count | 4 Coil Springs |
The Eibach PRO-KIT lowering spring set replaces factory springs with a progressive-rate coil design to lower the vehicle and sharpen handling. Installed as a direct replacement, the springs reduce ride height to lower the center of gravity, improve body control through corners, and reduce nose dive under braking. The black powder-coat finish helps resist corrosion and keeps the springs looking tidy over time. For a performance-minded driver this kit pairs well with stock or upgraded dampers to deliver crisper steering response and flatter midcorner behavior during spirited driving. Expect a firmer ride compared with stock springs, particularly on rough roads, and some alignment adjustment will be required after installation. This is a spring-only kit, so dampers, top mounts, and alignment are separate considerations when aiming for a balanced setup.
Best for: Drivers who prioritize sharper handling and a lower center of gravity for spirited street driving or occasional track days and who plan to tune dampers and alignment to match the springs.
Less Ideal for: Drivers who want a plush, comfort-oriented daily ride or those unwilling to perform post-install alignment and potential damper upgrades.
- Progressive-rate design improves cornering stability and reduces body roll
- Direct-fit kit for 2013–2017 Honda Accord simplifies installation
- Durable black powder-coat finish resists corrosion
- Lowers center of gravity for improved steering response
- Springs are firmer than stock which increases ride harshness on rough surfaces
Verdict: Choose these Eibach PRO-KIT springs to lower your 2013–2017 Accord and gain noticeably sharper handling and reduced body roll for performance-focused driving.
2. Truhart Lowering Springs for 2013+ Accord (2.0" Front / 2.1" Rear)
| Position | Lower |
|---|---|
| Manufacturer Part Number | TH-H410 |
| Item Weight | 25 pounds |
| ASIN | B00LGLYHCO |
These Truhart lowering springs replace the factory coil springs to lower a 2013–2017 Accord by about 2.0 inches in front and 2.1 inches in the rear, giving the car a flatter stance and firmer handling. They are used as a direct replacement in the suspension assembly and are intended for owners who want improved cornering and reduced body roll without the complexity of adjustable coilovers. Customers report a noticeably sportier look and sharper turn-in, though the ride becomes firmer and transmits more road feedback than stock springs. Installation can be straightforward for the rear but the front fitment and compression require care or a professional installer to avoid damage to axles or mounting components. The springs are a budget-friendly way to lower the car and tighten handling, but they are not height-adjustable and will make the ride firmer than factory; pairing them with refreshed dampers or alignment is recommended for best results.
Best for: Buyers who want a practical, cost-effective way to lower a 2013–2017 Accord and improve handling and appearance without investing in adjustable suspension.
Less Ideal for: Drivers who prioritize a plush daily ride or need adjustable ride height for track or mixed use should consider adjustable coilovers or a different suspension solution.
- Vehicle-specific fitment for 2013+ Accord simplifies installation planning
- Noticeable drop and improved stance for a sportier appearance
- Tighter handling and reduced body roll compared with stock springs
- Affordable alternative to adjustable coilovers
- Not height-adjustable so final ride height is fixed
- Stiffer ride and increased road harshness compared with factory springs
Verdict: If you want a straightforward, budget-friendly lowering solution to sharpen handling and give a 2013–2017 Accord a low, sporty stance, these Truhart springs are a practical choice.
3. BFC Manzo Performance Lowering Springs Kit LSAC-1316 for 2013–2016 Accord
| Placement | Front and Rear |
|---|---|
| Approx. Drop | Front 1" / Rear 1.2" |
| Spring Rate | Front 189 lbs / Rear 214 lbs |
| Exterior | Powdercoated |
| Model | LSAC-1316 |
These Manzo (BFC) lowering springs are a direct bolt-on replacement for 2013–2016 Accord front and rear springs, offering roughly a 1.0 inch drop up front and 1.2 inches in the rear. Constructed from cold wound steel with a phosphate powder coat, the springs are marketed to resist sagging and pair with factory shocks for improved cornering response, a lower center of gravity, and a sportier stance. For everyday drivers the claimed spring rates and modest drop should sharpen handling without making the ride harsh, and the kit keeps ground clearance reasonable to avoid frequent bottoming on typical streets. Expect the practical benefits to be better body control and a cleaner look with minimal modification. Trade-offs are typical of lowering springs: ride firmness will increase compared with stock, and long-term durability depends on road conditions and installation quality; shocks may eventually need replacing if they are worn. Fitment is limited to the specified Accord model years and requires basic suspension installation tools or a shop visit.
Best for: Buyers who want an affordable, factory-compatible lowering kit to sharpen handling and improve stance on a 9th-generation Accord while keeping installation simple.
Less Ideal for: Drivers seeking aggressive track-focused drops or those who prioritize the softest possible ride; also not for owners of other vehicle years or models.
- Direct bolt-on replacement for 2013–2016 Accord suspension with specified front and rear drop
- Cold wound steel construction with phosphate powder coat for corrosion resistance
- Modest drop and matched spring rates intended to improve handling without extreme harshness
- Compatible with factory shocks so initial installation can often use existing dampers
- May increase ride firmness compared with stock springs
- Long-term sag and durability can vary with road conditions and driving style
Verdict: A cost-conscious, factory-compatible lowering spring kit that tightens handling and improves the Accord's stance with a modest, streetable drop.
4. D2 Pro Lowering Springs for 2013+ Accord (Lower, Progressive-Rate)
| Material | High Tensile Chrome Silicon Steel |
|---|---|
| Fitment | Direct OE replacement |
| Drop | Lowers 1.8" front / 1.4" rear |
| Spring Design | Progressive-rate coils |
| Manufacturing | Cold-wound and heat-treated |
These D2 Pro lowering springs are a direct-fit replacement designed to lower 2013–2017 Accord models and tighten handling without a full suspension overhaul. Built from high-tensile chrome silicon steel with a cold-wound, heat-treated process and a corrosion-resistant finish, the springs use a progressive coil rate to reduce body roll, lower the center of gravity, and give the car a more aggressive look. Typical use is street driving where improved cornering and reduced lean are desired; installation is a mechanical job that many DIYers complete with basic tools but having help and proper spring compressors speeds the job. Real-world benefits reported by owners include a noticeable drop (around 1.4–1.8 inches), firmer yet still livable ride quality, and durable finish and spring-rate consistency from testing and factory-controlled manufacturing. Limitations are a firmer ride over rough roads compared with factory springs and occasional clearance issues with larger wheels and certain tire sizes that may need alignment or minor trim adjustments.
Best for: Buyers who prioritize a reliable, factory-quality lowering solution that sharpens handling and keeps long-term consistency without needing full coilovers or track-focused hardware.
Less Ideal for: Drivers who want a plush, stock-like ride or who frequently drive on very rough roads where a softer suspension is preferred.
- Direct-fit for 2013+ Accord models so bolt-on installation with no custom cutting
- Progressive-rate design improves cornering and reduces body roll compared with stock springs
- Cold-wound, heat-treated chrome silicon steel construction for consistent spring rate and durability
- Durable surface finish for corrosion resistance and long-term appearance
- Noticeably firmer ride over rough surfaces compared with factory springs
Verdict: If you want a dependable, factory-style lowering spring that sharpens cornering and holds its rate over time for 2013–2017 Accords, these D2 Pro springs are a practical choice.
5. Godspeed Traction-S Lowering Springs for 2013–2017 Honda Accord
| Fitment | Honda Accord 2013-2017 |
|---|---|
| Avg. Drop (F/R) | 1.1" / 1.3" |
| Spring Rate (F/R) | 3.39 kg/mm / 3.83 kg/mm |
| Material | SAE 9254 steel |
The Godspeed Traction-S lowering springs are a budget-friendly option that drops a 2013–2017 Honda Accord a small amount front and rear to tighten handling and reduce body roll. They are cold-wound from SAE 9254 steel, multi heat treated and powder coated to resist sag and corrosion, and are intended to work with factory shocks or upgraded performance dampers. In everyday use they give quicker turn-in and a firmer feel without making the ride harsh for most drivers, and reported drop figures are mild so ground clearance and daily comfort remain reasonable. Installation requires coil spring knowledge or a shop and pairing with worn shocks may expose the need for damper replacement to avoid premature wear. Fitment is specific to Accord models in the 2013–2017 range and they are best used by drivers who want a street-oriented lowering rather than an aggressively slammed look.
Best for: Buyers who want a conservative, street-oriented lowering for improved cornering and steering feel while keeping daily comfort and reliability in mind; they value real-user feedback and lower-risk modifications.
Less Ideal for: Drivers seeking extreme drop heights, show-stanced looks, or a full performance suspension upgrade including matched shocks and tuning should consider other options.
- Designed from SAE 9254 cold-wound steel and multi heat treated for reduced sag over time
- Powder coat finish provides corrosion resistance for longer service life
- Modest drop (about 1.1" front, 1.3" rear) tightens handling while retaining daily comfort
- Engineered to minimize rattling, clunking, and rubbing when installed correctly
- Not a complete kit with shocks so matching dampers may be needed for optimal performance
Verdict: A mild, well-built lowering spring set that sharpens handling on 2013–2017 Accords while preserving daily comfort and peace of mind.
Choosing the Right 2013-2017 Honda Accord Lowering Springs: Key Factors to Consider
Expected Drop and Vehicle Stance
How much the springs lower the car directly affects appearance, aerodynamics, and suspension geometry. For the 2013-2017 Accord, typical lowering ranges fall into mild to moderate drops; choosing a drop that is too aggressive can introduce rubbing, increased scrub, and altered bump steer.
Consider the balance between looks and function. A modest drop preserves ground clearance for speed bumps and driveways while delivering a noticeable reduction in body roll. A larger drop may look more aggressive but often requires alignment adjustments, possible fender rolling, and attention to tire clearance.
Spring Rate and Ride Quality
Spring rate determines how firm or soft the suspension feels and how the car responds under cornering, braking, and acceleration. Linear rates offer predictable behavior across travel, while progressive rates change stiffness as the spring compresses, often improving comfort for daily driving while still offering increased support in heavier maneuvers.
For Accord owners, choosing an appropriate spring rate minimizes harshness on rough roads while still reducing dive and roll. Keep in mind that stiffer springs can highlight worn shocks or bushings, so inspect related components before installation.
Compatibility With Stock Dampers
Many lowering springs are designed to work with the Accord's factory shock absorbers, but compatibility varies by how much the car is lowered and the spring rates chosen. Springs that are significantly stiffer than stock can accelerate wear on OEM dampers or produce a choppy ride.
If the springs' drop or rate exceeds recommended tolerances for stock shocks, plan for upgraded dampers or valving changes. Verifying the manufacturer's guidance on pairing springs with stock or aftermarket shocks helps avoid compromised handling and premature component failure.
Progressive Versus Linear Spring Design
Progressive springs change stiffness through travel, offering a softer initial rate for comfort and a firmer rate under heavy compression for control. Linear springs maintain a constant rate, which can deliver sharper handling feel but at the cost of a firmer everyday ride.
Deciding between progressive and linear designs depends on how you use the Accord. For a daily-driven car that also sees spirited driving, progressive springs often provide the best compromise. For track-focused use, linear springs with matched dampers typically give more predictable responses.
Installation Complexity and Alignment Needs
Installing lowering springs is a moderate-level job that usually requires spring compressors and care handling strut assemblies. On the 2013-2017 Accord, reassembly tolerances and correct top mount torque are important to preserve steering feel and trim fitment.
After installation, a complete wheel alignment is essential to correct camber, toe, and thrust angle changes caused by altered ride height. Factor in the tools, mechanical skill, or shop time required, and verify whether the springs include hardware or require additional components such as extended bump stops or camber kits.
Durability and Corrosion Resistance
Lowering springs are exposed to road salt, grit, and the elements, so protective coatings and quality finishes matter for long-term ride height retention and appearance. Springs that rust can suffer from coating flaking and eventual structural degradation.
Choose springs with durable powder coatings or specialized anti-corrosion treatments. Also consider manufacturing quality controls and material specifications, as consistent winding and heat treatment help maintain spring rates over time for the Accord's expected service life.
How Much Lowering Springs Typically Lower the Accord
Lowering springs for the 2013-2017 Accord commonly deliver a front drop in the range of about 1.0 to 1.8 inches and a slightly smaller rear drop, depending on the kit. The exact numbers depend on spring rates and whether the design is progressive or linear.
These drops change the car's roll center and scrub radii, so the visual drop may differ slightly between static measurements and perceived stance. Expect modest reductions in ground clearance that make a noticeable difference in handling without dramatically compromising daily usability when you choose moderate drops.
- Typical front drop: roughly 1.0 to 1.8 inches
- Typical rear drop: slightly less than front for balanced rake
- Larger drops may require alignment corrections and clearance checks
Coilover Vs Lowering Springs: When Each Makes Sense
Lowering springs are a focused, cost-effective way to lower ride height and improve handling while retaining much of the factory suspension's characteristics. They are generally simpler to install than a full coilover kit and are a good fit when you want a fixed, lowered height without height adjustability.
Coilovers provide adjustable ride height and damper tuning, which is valuable if you need precise corner balancing or plan to frequently change ride height. For most Accord owners seeking a one-time drop with an emphasis on daily comfort and improved body control, lowering springs are often the more practical choice.
- Lowering springs: simpler, less adjustable, typically retains factory damping
- Coilovers: adjustable height and damping, better for dedicated track use or frequent setup changes
Installation Tips for 2013-2017 Accord Owners
Prepare by inspecting strut mounts, sway bar links, and shock condition before removing the old springs. Worn mounts and shocks can worsen ride and handling after swapping springs, so replace those items if they show wear.
Use proper spring compressors and follow torque specs when reassembling struts. After installation, schedule a full alignment and re-check wheel clearances. Test for any noises or binding during initial miles and re-torque fasteners after a short break-in period.
- Check and replace worn mounts, shocks, and bump stops as needed
- Use proper tools and torque values when compressing and reinstalling springs
- Always perform a complete wheel alignment after lowering
What To Expect From Progressive Lowering Springs
Progressive springs offer variable stiffness that helps soften small bumps while providing firmer support under load. For the Accord, this often translates to a daily-drive friendly ride that still reduces body roll during spirited driving.
They tend to be forgiving over potholes and urban surfaces compared with aggressively linear springs, making them a sensible choice for owners who want lowered stance without sacrificing long-distance comfort.
- Softer initial rate for comfort, firmer later for control
- Good compromise for daily-driven Accords that see occasional spirited use
Addressing Clearance and Tire Fitment
Lowering changes wheel-to-fender clearances and can affect recommended wheel offset and tire size. When lowering the 2013-2017 Accord, check that your wheel and tire setup maintains sufficient fender gap to avoid rubbing during suspension compression and full steering lock.
If you plan to change wheels or fit wider tires, anticipate additional checks for rubbing and consider minor trim or fender work only when necessary. Proper alignment helps control camber changes that could otherwise accelerate inner tire wear.
- Recheck wheel offset and tire width after lowering
- Perform dynamic checks for rubbing during full steering travel and suspension compression
Still looking for the perfect fit?
Select your Honda Accord configuration to see the most relevant Lowering Springs recommendations
How We Chose the Best 2013-2017 Honda Accord Lowering Springs
We selected lowering springs for the 2013-2017 Honda Accord by applying practical, vehicle-specific filters that matter to owners. First, compatibility with the Accord chassis across the 2013 through 2017 model years was mandatory. We prioritized springs with documented drop ranges and published spring rates so buyers can predict handling and ride changes. Ride quality reports and spring design (progressive versus linear) were weighed to balance comfort and performance. Durability and corrosion resistance were considered to ensure springs hold ride height and appearance over time. We also looked for options that work well with the Accord's factory dampers or have clear recommendations when shock upgrades are advisable.Excluded from the shortlist were springs without reliable fitment information, products lacking technical specs, and options that require extensive suspension modification beyond typical owner capabilities. Our evaluation focused on measurable attributes: nominal front and rear drop, spring rates or progressive profiles, ride height retention, installation complexity, and overall suitability for common Accord uses like commuting and occasional spirited driving.
Our full evaluation process is outlined in our review methodology.
FAQ
How much will lowering springs affect ride comfort on my Accord?
It depends on the spring rate and design. Mild, progressive springs usually keep a comfortable ride with reduced body roll, while stiffer linear springs make the ride firmer and more responsive under cornering.
Do I need new shocks when I install lowering springs?
Often stock shocks are acceptable for moderate drops, but if the springs are significantly stiffer or lower the car beyond recommended ranges, upgraded dampers are advisable to maintain ride control and prevent premature wear.
Will lowering springs change my Accord's alignment specs?
Yes. Lowering alters camber and toe, so a full alignment is required after installation to restore proper tire wear and handling characteristics.
Can I install lowering springs myself on a 2013-2017 Accord?
If you have mechanical experience and the right tools, installing springs is possible, but it requires spring compressors and careful strut reassembly. Many owners prefer having a workshop handle the job to ensure safety and correct torque procedures.
Are progressive lowering springs better for daily driving?
Progressive springs typically offer a better balance between comfort and performance for daily-driven cars, since they soften minor impacts while firming up under heavier loads.
Will lowering springs increase tire wear on my Accord?
They can if the alignment is not corrected or if drop-induced negative camber is excessive. Proper alignment and occasional checks on toe and camber help minimize uneven tire wear.
Final Verdict
Prioritize the drop amount, spring rate, and compatibility with your Accord's dampers when choosing lowering springs. For most 2013-2017 Accord owners a moderate drop with progressive rates gives a strong balance of daily comfort and improved handling, while more aggressive setups demand attention to shocks, alignment, and clearance.Decide based on how you use the car: choose comfort-oriented progressive springs if you commute and occasionally push the car, or select firmer, linear springs only if you plan to support them with upgraded dampers and accept a firmer ride. Proper installation and alignment are essential to get the anticipated benefits and avoid secondary issues.
Explore More:
- Check out all Honda Accord parts & accessories
- Explore Lowering Springs Maintenance & Repair Guides
- Explore Suspension & Steering
- Browse all Auto Parts




