Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If you want more ground clearance, a taller stance, or clearance to run larger tires on your Honda CR-V, choosing the right lift kit matters. The wrong choice can affect ride quality, alignment, and handling, so it is worth matching the kit to how you drive and what modifications you plan. This guide presents six shortlisted lift kits that represent common approaches for the CR-V, with notes on fitment, expected ride changes, and installation considerations. We evaluated each option for fit accuracy and how it impacts ride and steering. Read on to find the style of lift that suits your driving needs and goals.
Looking for other parts? See all Honda CR-V parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Truhart Rear Camber Kit for 1997–2001 Honda CR-V (Lifted Vehicles) |  |
| Best Quality Built to a higher standard if you want something more solid | Tema4x4 30mm Complete Lift Kit for Honda CR-V (2017–present) |  |
| Best Budget The cheapest option that still gets the job done reliably | DEALPARTS 1.2" Rear Strut Spacers Leveling Lift Kit for Honda CR-V |  |
| Most Sold A high-volume bestseller chosen again and again | DEALPAREX 1.2-inch Leveling Lift Kit for Honda CR-V (2006–2017) |  |
| Best Value for Money The sweet spot between price and what you get | maXpeedingrods Front & Rear Lift Spacer Kit for Honda CR-V (2002–2006) |  |
| Best Overall The best all-around choice for most situations | Tema4x4 30mm Strut Spacer Lift Kit for Honda CR-V |  |
1. Truhart Rear Camber Kit for 1997–2001 Honda CR-V (Lifted Vehicles)
| Auto Part Position | Rear |
|---|---|
| Automotive Fit Type | Vehicle Specific Fit |
| Set Name | Truhart Rear Camber Kit |
This Truhart rear camber kit is a vehicle-specific alignment component made for lifted 1997–2001 Honda CR-V models to restore proper rear wheel camber after a suspension lift. It installs in place of the factory rear camber link and provides adjustable range so you can dial in alignment to reduce uneven tire wear and improve tracking after raising ride height. Typical use is with a 2-inch or similar lift where stock geometry moves outside factory tolerances; installers will adjust the eccentric bolts or adjustable arm to achieve the desired camber setting and then torque to spec. The product’s vehicle-specific fit and focus on lifted setups make it straightforward to use with standard suspension work, and its relatively light package suggests easy handling during install. Limitations are that it is intended for lifted CR-Vs only and does not address front suspension geometry or provide ride-height change itself, so you still need appropriate lift springs or spacers and a full alignment after installation.
Best for: Reliability-focused buyers who want a dependable, vehicle-specific fix to restore rear alignment after lifting a 1997–2001 Honda CR-V and prioritize long-term tire and suspension health.
Less Ideal for: Drivers seeking a full suspension lift solution or front-end alignment parts should look elsewhere because this kit only adjusts rear camber.
- Vehicle-specific fit for 1997–2001 Honda CR-V simplifies installation
- Adjustable camber allows correcting alignment after a suspension lift
- Compact, lightweight kit that is easy to handle during install
- Designed specifically for lifted setups to reduce uneven tire wear
- Only corrects rear camber and does not address front-end geometry or provide lift
- Not suitable for non-lifted vehicles where stock geometry is already within spec
Verdict If you lifted a 1997–2001 Honda CR-V and need a straightforward, adjustable rear camber correction, this vehicle-specific kit is a reliable choice.
2. Tema4x4 30mm Complete Lift Kit for Honda CR-V (2017–present)
| Fitment | Honda CR-V 2017–present |
|---|---|
| Lift height | 30mm |
| Material | Polyurethane (PU) |
This Tema4x4 lift kit adds 30mm of front lift to 2017–present Honda CR-Vs using polyurethane strut and coil spacers. It is typically used to increase ground clearance for light off-road driving, improved approach over curbs, and to create room for larger aftermarket wheels and tires. The kit’s PU construction promises durability and resistance to road wear compared with softer materials, and the parts are simple enough for a professional shop or a competent DIYer with basic tools to install. Practical benefits include better clearance on dirt or snowy roads and a modest style lift without changing suspension geometry or spring rates. Limitations are that the kit only lifts the front by 30mm, so rear height will remain unchanged unless a complementary rear solution is fitted, and it does not alter damping or load capacity so ride feel and handling will be largely unchanged. Installation should follow vehicle-specific instructions to avoid alignment issues after fitting.
Best for: Performance-oriented buyers who want a reliable, factory-style front lift for a Honda CR-V to improve clearance and style without changing suspension tuning or ride height philosophy.
Less Ideal for: Drivers seeking full vehicle lift, significant off-road suspension upgrades, or changes to ride damping and handling should consider a complete suspension system instead.
- Adds a consistent 30mm front lift for improved ground clearance
- Polyurethane spacers for durable, wear-resistant performance
- Includes both coil and strut spacers so front lift is integrated
- Straightforward installation suitable for shops or experienced DIY mechanics
- Front-only lift — rear height is not addressed by this kit
- Does not change damping or suspension tuning, so handling characteristics remain similar
Verdict A durable, easy-to-install 30mm front lift for 2017+ Honda CR-Vs that improves clearance and appearance without altering suspension tuning.
3. DEALPARTS 1.2" Rear Strut Spacers Leveling Lift Kit for Honda CR-V
| Auto Part Position | Rear |
|---|---|
| Material | Polyurethane (PU) |
| Included Components | fitting kit |
| Maximum Lifting Height | 1.2 Inches |
| Automotive Fit Type | Vehicle Specific Fit |
This DEALPARTS rear strut spacer kit lifts the rear of compatible Honda CR-V models roughly 1.2 inches using high-density polyurethane spacers and a basic fitting kit. It installs between the coil spring and strut to raise rear ride height, which helps clear slightly larger tires and improve low-speed clearance for light off-road or rough-road use. The kit is sold as two spacers plus hardware and is vehicle-specific for older CR-V generations listed by the manufacturer. Polyurethane construction should resist compression and last longer than cheap foam or thin plastic spacers, while the small, bolt-on design keeps installation relatively straightforward for someone comfortable with spring compressors and basic suspension work. Important limits to note are the modest lift height, which is not a suspension overhaul, and the rear-only nature of the kit, so handling and ride balance can change unless the front height is addressed separately. This is a practical budget option if you want a small clearance increase without replacing springs or struts.
Best for: Budget-conscious Honda CR-V owners who want a low-cost, rear-only lift to gain a little extra clearance for light off-road use or larger tires without replacing springs or struts.
Less Ideal for: Drivers seeking major lift, extensive off-road capability, or a full suspension rebuild should look at full spring or strut replacement kits instead.
- Vehicle-specific fit for compatible Honda models reduces the need for modification
- Polyurethane spacers offer durability and resistance to compression compared with cheaper materials
- Includes fitting kit so you get the spacers and basic hardware needed for installation
- Modest 1.2 inch lift improves rear clearance without changing springs or struts
- Rear-only lift can alter vehicle balance if front height is not matched
- Requires use of spring compressors and moderate mechanical skill for safe installation
Verdict A low-cost, durable rear spacer kit that gives Honda CR-V owners about 1.2 inches of extra clearance without replacing springs, best for light-duty use and budget builds.
4. DEALPAREX 1.2-inch Leveling Lift Kit for Honda CR-V (2006–2017)
| Compatibility | Honda CR-V (RE2/RE3/RE4 2006–2012; RM1/RM4 2012–2017) |
|---|---|
| Material | Polyurethane (PU) |
| Maximum Lifting Height | 1.2 Inches |
| Included Components | 2 front spacers, 2 rear spacers, fitting kit |
This DEALPAREX lift kit is a set of polyurethane coil spring spacers and a fitting kit designed to lift Honda CR-V models from 2006 through 2017 by roughly 1.2 inches. Installation replaces the upper strut seat with the supplied spacers on both front and rear struts to gain extra clearance for snow, rough roads, or larger wheels and tires. The spacers are made from high-density polyurethane intended for durability and resistance to road grime and salt, and the kit is vehicle-specific so it matches the CR-V strut mounting points. Practical benefits include a modest lift without changing spring or shock components, easier fitment of bigger wheels, and a simpler, lower-cost way to improve approach clearance. Limitations are that the small lift will not substantially change suspension geometry, load capacity, or off-road articulation, and it does not address shocks, alignment needs, or long-term wear on factory suspension parts. Professional installation and a post-install alignment are recommended for predictable handling.
Best for: Risk-averse mainstream buyers who want a conservative, factory-style improvement in ground clearance for everyday driving and occasional rough roads without modifying springs or shocks.
Less Ideal for: Drivers seeking major off-road capability, large lifts, or who plan heavy towing and hauling should look at full suspension systems instead.
- Vehicle-specific fit for 2006–2017 Honda CR-Vs simplifies installation
- High-density polyurethane construction resists corrosion and adds durability
- Includes front and rear spacers plus fitting kit so you do not need additional parts
- Raises ride height about 1.2 inches to improve clearance for rough roads or larger wheels
- Small lift does not correct suspension geometry or increase load capacity
- Does not include shocks or components to address changed alignment requirements
Verdict A simple, vehicle-specific spacer kit that provides a modest, durable 1.2-inch lift for CR-V owners who want extra clearance without replacing springs or shocks.
5. maXpeedingrods Front & Rear Lift Spacer Kit for Honda CR-V (2002–2006)
| Fitment | Honda CR-V 4WD 2002-2006 |
|---|---|
| Lift height | 2.5" front & 3" rear |
| Material | Alloy Steel |
| Included components | Front coil spring spacer, strut spacers, installation hardware |
| Manufacturer | maXpeedingrods |
This maXpeedingrods lift spacer kit is a simple, bolt-on solution to raise a 2002–2006 Honda CR-V 4WD without replacing struts or springs. It installs as front coil spring and strut spacers plus rear lift spacers and includes hardware for a straightforward DIY or shop fitment. Made from alloy/carbon steel with a protective coating, the kit is intended to add roughly 2.5 inches front and 3 inches rear of clearance to fit larger tires and reduce the factory nose-down rake while preserving the vehicle's factory ride feel. Benefits include durable construction, vehicle-specific fitment that simplifies installation, and the ability to run taller tires up to the listed fitment. Limitations are that spacers do not change suspension damping or geometry beyond ride height, so alignment and possible additional camber/camber arm adjustments may be required for optimal tire wear and handling. This is a budget-friendly route to lift a CR-V but not a replacement for a full suspension overhaul if you need improved off-road articulation or heavy-load capability.
Best for: Practical optimizers looking to raise a 2002–2006 Honda CR-V 4WD on a budget and keep most of the factory ride characteristics while fitting larger tires.
Less Ideal for: Drivers seeking full suspension performance upgrades, heavier load carrying, or serious off-road articulation should consider complete strut or lift systems instead.
- Vehicle-specific design for 2002–2006 Honda CR-V 4WD reduces fitment guesswork
- Adds significant ground clearance and levels factory rake with 2.5" front and 3" rear lift
- Made from high-strength alloy/carbon steel with a protective coating for corrosion resistance
- Includes installation hardware so you get a complete kit ready for fitment
- Does not alter damping or suspension geometry beyond height so handling changes may occur
- May require alignment or camber adjustments after installation to prevent uneven tire wear
Verdict A practical, vehicle-specific spacer kit that gives a 2002–2006 Honda CR-V 4WD noticeable lift at a budget price while keeping installation simple.
6. Tema4x4 30mm Strut Spacer Lift Kit for Honda CR-V
| Lift height | 30mm |
|---|---|
| Material | Polyurethane (PU) |
| Auto Part Position | Front |
| Included Components | strut spacers |
This Tema4x4 lift kit uses polyurethane strut spacers to add approximately 30mm of front lift to a Honda CR-V, improving ground clearance and giving a slightly taller, more rugged stance. Installation replaces the strut top with the spacer between the strut and mounting point, a job a competent DIYer or independent mechanic can complete with basic tools. The kit’s polyurethane construction resists corrosion better than bare metal spacers and keeps the spacer lightweight and durable for everyday driving and light off-road use. Practical benefits include easier clearance over curbs and rough roads and the option to fit larger rims or tires with less rubbing. Limitations are that the lift is modest and focused on the front only, so it will not transform off-road capability or curing major suspension geometry issues. Expect possible minor height tuning at installation and to pair this kit with appropriate wheel alignment afterward to avoid uneven tire wear.
Best for: Balanced buyers who want a practical, factory-quality-looking lift to improve clearance and appearance without major suspension changes or complex modifications.
Less Ideal for: Drivers seeking a full suspension overhaul, large lifts, or serious off-road upgrades should choose a multi-component lift or professional suspension system instead.
- Adds a measurable 30mm of front clearance to reduce curb and trail scraping
- Polyurethane material resists corrosion compared with bare metal spacers
- Relatively simple replacement-style installation that a competent DIYer can perform
- Improves vehicle stance and allows fitting slightly larger wheels or tires
- Front-only lift so rear ride height and suspension geometry remain unchanged
- Modest lift amount not intended for serious off-road articulation or heavy-duty use
Verdict A straightforward 30mm polyurethane front spacer kit that raises clearance and improves stance for CR-V owners who want a modest, easy-to-install lift.
Choosing the Right Honda CR-V Lift Kit: Key Factors to Consider
Lift Height And Intended Use
The amount of lift you choose directly affects how the vehicle behaves and what it can clear. Small lifts are mainly for fitting slightly larger tires and improving ground clearance over obstacles encountered in light off-road use. Larger lifts increase capability but often change steering feel and require additional modifications.
Consider your typical driving conditions before selecting height. If most driving is on paved roads, a modest lift that preserves alignment and handling is usually better. For more aggressive off-road use, allow for the increased need for driveline and suspension adjustments when choosing taller kits.
Suspension Type And Ride Quality
Different lift kits use different suspension strategies, such as spacer lifts, coil spring replacements, or complete suspension systems. Each approach alters spring rates and damping characteristics, which in turn affect ride quality and handling.
Spacer-style lifts can maintain much of the stock spring behavior but may transmit more NVH. Replacing coil springs lets you tune for weight and load but requires correct matching with shocks. Full suspension kits give the most comprehensive improvement in performance but add complexity.
Alignment And Geometry Impacts
Raising the vehicle changes wheel alignment settings and can affect camber, toe, and caster angles. These changes influence tire wear, steering response, and directional stability. Some lift solutions keep geometry within acceptable ranges while others necessitate additional adjustable components to restore correct alignment.
Plan for alignment after installation and verify whether the kit requires adjustable control arms, camber kits, or extended brake lines to maintain safe, predictable handling.
Tire And Wheel Clearance
One of the main reasons people fit lift kits is to accommodate larger tires. Lift height, wheel offset, and fender clearance all determine what tire size will fit without rubbing. Also consider suspension travel and articulation; a tire that fits at static ride height may still rub under compression or full steering lock.
Measure carefully and allow margin for wheel movement. You may also need different wheel backspacing or minor trimming to gain acceptable clearance without affecting suspension components.
Installation Complexity And Requirements
Kits vary from simple spacer installs to full suspension overhauls. Installation complexity affects time, tools, and whether you can perform the work yourself. Some kits require spring compressors, torque specs and alignment afterward, while others may need specialized tools or the removal of steering components.
Be realistic about your mechanical ability and workshop resources. If you plan to install the kit yourself, choose one with clear instructions and commonly available tools, and factor in an alignment appointment after installation.
Durability, Corrosion Resistance, And Maintenance
Lift kit components are exposed to road grime, water, and stresses from altered suspension geometry. Materials, protective finishes, and the quality of fasteners influence long-term reliability. Better corrosion resistance reduces the chance of seized hardware and prolongs service life.
Also consider maintenance needs such as periodic torque checks, bushing wear inspection, and how easy it is to replace consumable parts like bushings or shocks. Durable designs reduce lifetime ownership hassle.
FAQ
Will lifting a Honda CR-V affect fuel economy?
Lifting a vehicle can change aerodynamics and increase rolling resistance if larger tires are used, which often leads to a modest decrease in fuel economy. The exact effect depends on lift height, tire size, and driving style. Smaller lifts with minimal tire changes usually have a smaller impact than larger modifications.
How hard is it to install a lift kit on a Honda CR-V?
Installation difficulty depends on the kit type. Spacer installs and basic spring swaps are typically manageable for experienced DIYers with standard tools. More comprehensive kits that change shocks, control arms, or require reindexed mounting points are more complex and may be better handled by a professional. An alignment is recommended after installation in most cases.
Do I need to change shocks when I lift my CR-V?
Changing shocks is often advisable because stock dampers are tuned for specific spring rates and ride height. Lifting without adjusting damping can lead to poor control or premature wear. Some kits include compatible shocks or recommend upgraded dampers to match the new suspension characteristics.
Can I fit larger tires with a small lift?
A modest lift frequently provides enough clearance for slightly larger tires, but fit depends on tire width, wheel backspacing, and steering geometry. It is important to check for rubbing during full suspension travel and steering lock. Planning for wheel offset and possibly minor trimming can help achieve a proper fit.
Will a lift kit change my vehicle warranty or insurance?
Modifications can affect warranty coverage and insurance in some situations, depending on the policies in place. It often depends on whether the modification causes a failure or is related to a claim. Check your vehicle warranty terms and insurance policy or talk to your provider for specifics before proceeding.
How We Chose the Best Honda CR-V Lift Kit
We prioritized kits that maintain safe suspension geometry for the Honda CR-V and minimize adverse effects on steering and driveline angles. Our evaluation criteria included fitment accuracy to CR-V mounting points, impact on ride comfort and handling, the type of lift hardware used, and how the kit affects tire clearance and wheel offset. We also considered ease of installation and the typical tools or additional parts required for a complete, reliable installation. Durability of components and corrosion resistance were included as longevity filters. Kits were excluded if they required extensive, irreversible cutting of unibody structure or if installation routinely necessitated professional frame modification. We did not include options that focused solely on cosmetic spacers without addressing alignment or control arm geometry. The final list emphasizes solutions that balance on-road manners with increased clearance for light off-pavement use.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right lift kit for a Honda CR-V is about balancing the clearance and tire size you want with acceptable changes to ride, steering, and alignment. Prioritize options that preserve suspension geometry, match the intended driving use, and include clear installation requirements. Plan for any secondary changes such as shock upgrades, alignment, or wheel backspacing. By matching lift height and kit type to your driving needs, you can gain capability while keeping handling and long-term reliability in balance.
Explore More:
- Check out all Honda CR-V parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
