Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you own a 2007-2011 Honda CR-V and want more ground clearance or the ability to fit larger tires, choosing the right lift kit matters. The wrong kit can upset suspension geometry, produce harsh ride quality, or create premature wear on steering components. This guide narrows the field to the top shortlisted lift kits that suit the CR-V chassis from 2007 through 2011, explaining how each option addresses ride comfort, alignment limits, and installation complexity.Below we summarize the main tradeoffs owners face and the evaluation criteria used to select these seven top choices, then cover practical installation and compatibility considerations to help you pick the best kit for your needs.
Looking for other parts? See all Honda CR-V parts & accessories.
Top Picks at a Glance
| Best Overall Lift Kit The best all-around choice balancing performance, fit, and reliability | maXpeedingrods 2" Front & Rear Lift Spacer Kit for Honda CRV 2007-2016 |  |
| Best Budget Lift Kit A low-cost lift solution that keeps expenses down without failing | 0.8 in / 20 mm Rear Strut Spacers Leveling Lift Kit for Honda CR-V & Odyssey |  |
| Best Complete Lift Kit A full kit with all required parts for a complete installation | Protune Suspension 2" Front & Rear Leveling Kit for Honda CRV 2007-2016 |  |
| Best Spacer Lift Kit Simple strut or coil spacers for a modest lift with minimal changes | Tema4x4 40mm Rear Strut Spacers Lift Kit for Honda CR-V (Pair) |  |
| Best Adjustable Lift Kit Height-adjustable components for tuning ride height and stance | maXpeedingrods 1.5" Lift Leveling Kit for Honda CR-V 2007–2016 with Adjustable Camber Arm |  |
1. maXpeedingrods 2" Front & Rear Lift Spacer Kit for Honda CRV 2007-2016
Best Overall Lift Kit
| Fitment | Honda CRV 2007-2016 |
|---|---|
| Maximum Lifting Height | 2 Inches |
| Included Components | Front Coil Spring Spacer, Strut Spacers, Installation Guide |
| Automotive Fit Type | Vehicle Specific Fit |
This maXpeedingrods lift spacer kit raises a 2007–2016 Honda CR-V by about 2 inches at both front and rear using steel spacers that bolt onto the existing suspension. It is intended for owners who want modest ground clearance gains for rough roads or larger tires without replacing springs or struts. Installation is relatively straightforward for a competent DIYer and the kit comes with a basic installation guide. The steel construction and factory-style coating aim to resist corrosion and provide durable support, while the modest lift helps retain a comfortable everyday ride and steering feel. Some buyers report fitment issues at the rear that require minor trimming or additional parts such as camber arms and adjustable sway links to restore alignment and anti-roll geometry. If you stick to the specified vehicle years and follow fitment notes, the kit is a cost-effective way to lift the CR-V with minimal drivetrain or suspension changes, but budget for an alignment and potential small modifications to fully finish the installation.
Best for: Buyers who want an affordable, mostly bolt-on way to raise a 2007–2016 Honda CR-V by a small amount while keeping street-friendly ride quality and doing the work themselves.
Less Ideal for: Drivers who need large lifts, heavy off-road use, or want a fully bolt-in suspension overhaul should look at complete lift kits with new springs and shocks instead.
- Bolt-on spacer design enables relatively quick installation without spring or strut replacement.
- Provides a modest 2-inch lift that improves ground clearance and allows slightly larger tires while retaining everyday ride comfort.
- Constructed from high-strength steel with a protective coating to resist corrosion.
- Vehicle-specific fit for Honda CR-V 2007–2016 simplifies part selection and reduces guesswork.
- Some users reported rear spacer fitment problems requiring trimming or additional hardware to achieve proper fastening and alignment.
Verdict: The best all-around lift kit that balances ride quality, durability, ease of installation, and overall value for typical DIY installers.
2. 0.8 in / 20 mm Rear Strut Spacers Leveling Lift Kit for Honda CR-V & Odyssey
Best Budget Lift Kit
| Lift height | 0.8 inch (20 mm) |
|---|---|
| Included components | Rear strut spacers 2 pcs |
| Material Type | Aluminum |
| Auto Part Position | Rear |
These rear strut spacers are a simple, low-cost way to add about 0.8 inch of lift to the rear of compatible Honda CR-V and Odyssey models. The kit includes two aluminum spacers and mounting hardware intended for bolt-in installation at the rear struts, so it is typically used by owners who want a small, quick increase in ground clearance or a slightly more level stance. Aluminum construction keeps weight down while resisting corrosion, and the universal fit claim plus included hardware aims to simplify fitting without major suspension changes. Practical benefits are clearer obstacle clearance, a marginally improved stance for light off-road use, and an installation that a competent DIYer or local shop can complete in a short time. Limits are that this is a rear-only spacer set providing modest lift rather than a full suspension lift, so it will not increase wheel travel or change front ride height and it is not a solution for heavy-duty off-road use or major tire upgrades.
Best for: Buyers who need the cheapest practical way to raise the rear of a 2007–2011 Honda CR-V slightly for improved clearance or a more level look and who value straightforward DIY installation.
Less Ideal for: Drivers seeking a full lift, significant off-road capability, larger tire fitment, or a matched front-and-rear suspension solution should choose a complete lift system instead.
- Adds a modest 0.8 inch rear lift to improve ground clearance and stance
- Aluminum construction for corrosion resistance and light weight
- Includes hardware for bolt-in installation to simplify fitting
- Designed to match rear strut position so no major suspension disassembly is required
- Rear-only spacers do not raise the front or increase suspension travel
- Universal fit claim may require minor adjustments for exact model compatibility
Verdict: The best budget lift kit for buyers prioritizing low upfront cost while still delivering acceptable fit, basic durability, and straightforward installation.
3. Protune Suspension 2" Front & Rear Leveling Kit for Honda CRV 2007-2016
Best Complete Lift Kit
| Brand Name | Protune Suspension |
|---|---|
| Included Components | Strut Spacers, Installation Guide |
| Automotive Fit Type | Vehicle Specific Fit |
| Set Name | 2" Front & Rear Leveling Kit (4-Piece) for Honda CRV 2007-2016 |
| Material Type | Alloy Steel |
This Protune Suspension 2" leveling kit raises the front and rear of a 2007–2016 Honda CR‑V using four alloy steel spacers that bolt onto the existing strut mounts. It is intended as a simple bolt-on solution that increases ground clearance without replacing springs or struts. The kit ships with front and rear spacers and a digital installation guide so a competent DIYer with basic tools can complete the install; alignment is recommended afterward. The supplier says the spacers are powder-coated solid steel and designed to preserve factory ride quality because the original suspension components remain in use. Practical benefits include a quick install window compared with full suspension replacement and a modest, even lift front-to-rear suitable for clearing larger tires or improving stance. Limitations are that this is a spacer-style leveling kit only, so it will not change spring rates, provide additional damping, or address heavy-load sag, and some installations may require alignment or minor adjustments for proper geometry.
Best for: DIY-minded owners who want a single, bolt-on kit to raise ride height on a CR‑V without swapping springs or struts and who prioritize a straightforward install over changing ride dynamics.
Less Ideal for: Drivers seeking a full suspension upgrade to improve load carrying, off-road articulation, or damping should consider a complete spring and shock kit instead.
- True bolt-on design that uses spacers for a fast, relatively simple install
- Includes front and rear spacers plus an installation guide for a single-purchase solution
- Powder-coated alloy steel spacers offer corrosion resistance and durability
- Preserves factory springs and dampers so ride comfort should remain similar to stock
- Does not include replacement springs, shocks, or hardware to change suspension tuning
Verdict: The best complete lift kit for DIYers who want a single purchase that includes all necessary components and hardware for a full, worry-free install.
4. Tema4x4 40mm Rear Strut Spacers Lift Kit for Honda CR-V (Pair)
Best Spacer Lift Kit
| Fitment | Honda CR-V (RE2) 2007-2011, CR-V (RM1) 2012-2016 |
|---|---|
| Rear lift | 40mm (1.57 inches) |
| Material | Automotive-grade polyurethane |
| Included components | 2 × Rear Strut Spacers; Fitting Kit |
| Manufacturer warranty | 2 Year Manufacturer Warranty |
This rear strut spacer kit raises the rear of compatible Honda CR-V models by 40mm (about 1.57 inches) using polyurethane spacers that mount to the factory strut using existing hardware. It is designed as a bolt-on solution that keeps the original strut and uses factory mounting points, so installation typically takes an hour or two per axle and does not require cutting or welding. The polyurethane material is described as automotive-grade with resistance to compression set, UV, ozone, and oils, offering a firmer feel than rubber while avoiding the noise and weight of metal spacers. Practical benefits include increased ground clearance for light off-road use or to level a vehicle carrying a load, and preservation of factory ride characteristics compared with full-length suspension swaps. Limitations are that it only lifts the rear 40mm, so front and rear ride heights will need separate attention to balance stance, and alignment should be checked after installation; this is not a replacement for upgraded shocks or a full lift if you need significant travel or heavy-duty off-road capability.
Best for: Buyers who want a quick, low-cost way to raise the rear of a 2007–2016 Honda CR-V to improve clearance or level a loaded vehicle while keeping factory suspension components and a simple install.
Less Ideal for: Drivers seeking large lifts, increased suspension travel, or heavy off-road performance should consider full suspension upgrades or longer-travel kits instead.
- Provides a modest 40mm rear lift to increase ground clearance and reduce rear sag
- Bolt-on installation using factory mounting points with no cutting or welding required
- Polyurethane construction resists compression set, UV, ozone, and oils for durable performance
- Only raises the rear axle by 40mm so it does not provide a full-vehicle lift or increased suspension travel
Verdict: The best spacer lift kit for owners seeking a modest ride height increase with minimal modification, quick installation, and lower cost than full suspension swaps.
5. maXpeedingrods 1.5" Lift Leveling Kit for Honda CR-V 2007–2016 with Adjustable Camber Arm
Best Adjustable Lift Kit
| Fitment | Honda CR-V 2007-2016 |
|---|---|
| Maximum Lifting Height | 1.5 Inches |
| Auto Part Position | Front, Rear |
| Material Type | High Tensile Strength Carbon Steel |
This maXpeedingrods 1.5" lift leveling kit raises a 2007–2016 Honda CR-V by 1.5 inches using front and rear spacers and adds an adjustable camber arm for alignment correction. It is installed as a bolt-on kit that keeps the factory struts and shocks in place, so you can increase ride height and get a more commanding stance without replacing major suspension components. The adjustable camber arm's 227–277 mm range and greaseable poly bushing make it straightforward to dial in camber after lifting, which helps preserve tire wear and handling. Made from high tensile strength carbon steel, the kit is built for durability, and the included hardware simplifies installation for a competent DIYer or a local shop. Limitations are that this is a mild 1.5-inch lift intended for leveling and light clearance gains rather than heavy off-road use, and it does not change damping or ride quality because existing shocks and struts remain unchanged.
Best for: Buyers who want a simple, reversible way to raise and level a 2007–2011 Honda CR-V and who plan to fine-tune alignment rather than replace the entire suspension.
Less Ideal for: Drivers seeking large lifts, serious off-road capability, or improved damping and load-handling from new shocks should choose a more comprehensive suspension upgrade.
- Bolt-on front and rear spacers let you raise ride height without replacing struts or shocks
- Adjustable camber arm (227–277 mm) allows fine tuning of wheel alignment after lift
- High tensile strength carbon steel construction for durability
- Greaseable poly bushing with zerk fitting simplifies maintenance and reduces bushing wear
- Only a 1.5-inch lift so it offers limited additional ground clearance compared with bigger kits
- Does not include upgraded shocks or struts, so ride damping and heavy-load handling are unchanged
Verdict: The best adjustable lift kit for buyers who want flexibility to fine-tune ride height and balance load-handling without replacing major suspension parts.
Choosing the Right 2007-2011 Honda CR-V Lift Kit: Key Factors to Consider
Lift Height and Intended Use
Decide how much lift you need based on how you use the CR-V. A 1 to 2 inch lift typically clears slightly larger tires and improves ground clearance for light trails while preserving near-stock handling. Taller lifts may allow more aggressive tires but increase suspension leverage and stress on steering and drivetrain components.
Consider the tradeoff between off-road capability and on-road comfort. Small lifts are better for daily-driven CR-Vs that occasionally encounter rough roads. Larger lifts can require additional changes such as longer brake lines, track bar adjustments, or revised alignment settings to maintain safe steering geometry.
Shock And Spring Compatibility
A lift kit must match or include shocks and springs rated for the extra ride height. Using stock dampers with a significant lift can lead to poor damping, top-out, or bottoming. Kits that include matched shock absorbers or clearly specify compatible aftermarket shocks help maintain ride control and handling balance.
Also check whether the kit uses spacer-style lifts, new coil springs, or strut housings. Coil spring lift kits usually provide better ride quality for the CR-V than simple spacers because they maintain spring preload and suspension travel more consistently.
Alignment And Steering Geometry Effects
Raising the vehicle changes suspension angles and affects toe, camber, and caster settings. Even modest lifts can introduce alignment variables that increase tire wear or change steering feel. Choose a kit designed to limit geometry changes or plan for a professional alignment after installation.
Some kits include correction components such as extended control arms or adjustable alignment links to restore closer-to-factory geometry. If the kit does not, budget for alignment adjustments and inspect tie rod ends, ball joints, and steering boots after installation for abnormal wear.
Tire Clearance And Wheel Fitment
One common reason to lift a CR-V is to fit larger-diameter or wider tires. Check the maximum tire size that a kit supports without trimming or rubbing in full lock and suspension compression. Wheel offset and backspacing play a big role in fitment, so review recommended wheel specs alongside tire dimensions.
Also evaluate whether the kit affects fender gap and whether fender trimming or aftermarket flares might be required for aggressive setups. A well-documented kit will list compatible wheel and tire ranges for the CR-V's suspension travel and steering sweep.
Installation Complexity And Required Modifications
Assess whether you will install the kit yourself or use a shop. Some kits are bolt-on and straightforward for a competent DIYer with basic tools and a spring compressor. Others require cutting, welding, or replacement of control arms and bump stops, which increases labor and expertise needs.
The kit should come with clear hardware and instructions. If extra components like extended brake lines, sway bar links, or alignment hardware are necessary, factor those into the total time and effort. Consider how easy it will be to service the modified suspension in the future.
Durability, Corrosion Resistance, And Warranty
The CR-V often sees snow, road salt, and wet environments, so coating, plating, and corrosion-resistant fasteners matter for long-term durability. Look for kits with powder coating, galvanized components, or stainless hardware where possible to reduce rust-related failures.
Also review available warranty coverage and how the vendor handles fitment issues for this specific model range. A robust warranty and responsive technical support can make it easier to resolve issues after installation without leaving you with retrofit headaches.
How Much Lift Is Safe For The 2007-2011 CR-V
For the 2007-2011 CR-V, modest lifts in the 1 to 2.5 inch range are the most practical and safest for everyday driving. This amount typically preserves steering geometry and avoids the need for extensive driveline or steering modifications while still providing meaningful clearance for rough roads or larger tires.
Higher lifts increase the chances of altered handling, increased wear on ball joints and tie rods, and may require additional parts to maintain proper alignment. If your goal is light off-road access and improved approach clearance, aim for the lower end of the lift spectrum and prioritize kits that specify safe ranges for this chassis.
- 1.0 to 1.5 in: minimal change, good for slightly larger tires and rough roads
- 1.5 to 2.5 in: better clearance and compatible with many 215/70-16 or similar tires with proper wheel offset
- Above 2.5 in: often needs extra steering or brake line modifications and careful alignment
Installation Tips For DIYers
Prepare by collecting all required tools, a reliable jack and stands, spring compressor if needed, and the torque specs for suspension fasteners. Work on a flat surface and take photos of the original layout before disassembly to help with reassembly.
Follow the kit instructions step by step and do not skip recommended hardware swaps such as new sway bar links or bump stop extensions. After installation, torque all fasteners to spec, then test-drive slowly to confirm there are no unusual noises or handling changes before regular driving.
- Always get a professional alignment after lifting the vehicle
- Check brake line slack and steering boot condition during reassembly
- Inspect clearances at full lock and full suspension travel
What Changes To Expect In Ride Quality
A well-chosen lift that includes matched springs and appropriate shocks should maintain a comfortable ride for daily driving. Spacer-only lifts are more likely to change spring rate and reduce available travel, which can produce a firmer, less controlled ride.
Expect slightly higher center of gravity and potential increase in body roll. Damping choices matter more after a lift. If shocks are not included, select absorbers tuned for the lifted height to reduce pogoing or increased harshness.
- Matched springs and shocks = smoother transition and controlled body motion
- Spacer lifts = cheaper but can sacrifice travel and comfort
- Plan for a brief break-in and re-torque of hardware after initial miles
Common Additional Parts You May Need
Depending on lift height and kit completeness, you might need extended sway bar end links, shortened or extended brake lines, new bump stops, or alignment correction components. These parts ensure safe operation and preserve steering function at the new ride height.
Review the kit contents carefully before purchase so you know what is included and what you will have to source separately. Getting the right supplemental parts upfront reduces installation delays and the risk of leaving the vehicle in a compromised state.
- Sway bar links for full suspension travel
- Brake line extensions or flexible lines if required
- Bump stop extensions to avoid premature top-out
Legal And Practical Considerations
Local vehicle regulations may limit permitted lift heights or require inspections. Before modifying your CR-V, check state or regional laws on suspension modifications and headlight aim changes that could result from raising the front end.
Additionally, consider the impact on fuel economy and daily drivability. Larger tires increase rolling resistance and may reduce highway MPG. Confirm that the lift does not interfere with other vehicle systems such as ABS sensors or emissions-related components.
- Verify local regulations on maximum lift height
- Confirm headlight alignment after modification
- Monitor fuel economy and tire wear for the first few hundred miles
Still looking for the perfect fit?
Select your Honda CR-V configuration to see the most relevant Lift Kits recommendations
How We Chose the Best 2007-2011 Honda CR-V Lift Kit
We prioritized lift kits that provide safe, predictable fitment for the 2007-2011 Honda CR-V chassis and that address the common goals owners have for this generation: modest ride height gain, compatibility with larger tires, and minimal negative impact on handling. Our selection criteria focused on real-world durability under mixed pavement and light off-road use, how the kit affects suspension geometry, and the inclusion of necessary components to avoid additional parts orders.Concretely, we evaluated kits on ride quality and damping compatibility, clear instructions and installation complexity, parts completeness (bushings, shocks, control arm allowances), fitment tolerances for common tire sizes, and corrosion resistance for longevity. We also considered vendor technical support and documented user fitment reports for this model years' mounting points.Excluded were kits designed for extreme lift heights beyond what the CR-V chassis can safely accept, universal or multi-vehicle kits without model-specific brackets, and options that require extensive fabrication. The final picks balance practical lift height with vehicle dynamics and installation feasibility for typical DIYers and independent shops.
Our full evaluation process is outlined in our review methodology.
FAQ
How large a tire can I fit on a lifted 2007-2011 CR-V?
It depends on the lift height, wheel offset, and tire width. Modest lifts in the 1 to 2.5 inch range commonly accept slightly taller tires without rubbing, but you should consult the kit documentation and check wheel backspacing. Always test full-lock and full-compression clearances before committing to a tire size.
Will lifting my CR-V void the warranty or cause inspection issues?
Warranty and inspection rules vary by region. Lifting can affect warranty claims if a lift contributes to a failure, and some local regulations restrict maximum lift heights. Check your vehicle warranty terms and local laws before proceeding.
Can I install a lift kit myself on the 2007-2011 CR-V?
Many kits are bolt-on and within the ability of experienced DIYers with proper tools and a safe workspace. However, kits that require spring compressors, cutting, or welding are better handled by a professional. Plan for a post-installation alignment regardless of who performs the work.
Do I need new shocks when I lift the CR-V?
Often yes. The stock shocks are tuned for the factory ride height and may not control the altered suspension motion after a lift. Kits that include matched shocks or specify compatible replacements help maintain ride quality and handling.
How does a lift affect fuel economy and handling?
A lift raises the vehicle center of gravity and can increase aerodynamic drag and rolling resistance, especially with larger tires, which may slightly reduce fuel economy. Handling changes include more body roll and a different steering feel; proper damping and alignment help mitigate these effects.
Final Verdict
Prioritize a lift height and kit design that match how you use your 2007-2011 Honda CR-V. For daily-driven vehicles that occasionally see rough roads, modest lifts that include matched springs or clearly specify compatible shocks offer the best balance of clearance and predictable handling. If you need more tire capacity or off-road capability, accept the tradeoffs of additional hardware, alignment work, and potential changes in ride quality.Focus on kits that document fitment for this model years' mounting points, include necessary supplemental parts, and minimize changes to suspension geometry. With the right choice and proper installation, a lift can expand capability while keeping the CR-V safe and dependable.
Explore More:
- Check out all Honda CR-V parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
