Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a 2017-2022 Honda CR-V and want more ground clearance or the ability to run larger tires, choosing the right lift kit matters. The wrong kit can hurt ride quality, steering feel, and suspension geometry, while the right one balances clearance, daily drivability, and long-term reliability. This guide covers six shortlisted lift kits that suit the 2017-2022 CR-V, focusing on how they affect ride comfort, handling, and fitment for larger tires. We evaluate each option for installation complexity and compatibility so you can pick the kit that matches your intended use. Read on for straightforward guidance before you inspect product specifics.
Looking for other parts? See all Honda CR-V parts & accessories.
Top Picks at a Glance
| Best Overall Lift Kit A well-rounded kit that balances performance, parts, and reliability | PRL Motorsports 1.6" Lift Kit for 2017-2022 Honda CR-V |  |
| Best Budget Lift Kit A low-cost lift solution that preserves basic functionality and safety | DEALPARTS 1.2" Polyurethane Leveling Lift Kit for Honda CR-V & Civic (Full Kit) |  |
| Best Premium Lift Kit Higher-end components and tuning for superior ride and longevity | maXpeedingrods Coilover Kit for Honda CR-V 2017–2022, 24-Position Adjustable Dampers |  |
| Best Complete Lift Kit A full kit with all necessary hardware and suspension components included | Tema4x4 20mm Front Strut and Rear Coil Spacer Lift Kit for Honda CR-V (Pair) |  |
| Best Easy-Install Lift Kit Designed for simple bolt-on installation with minimal specialty tools | DEALPAREX 1.2 inch Front Strut Spacers Leveling Lift Kit |  |
| Best Heavy-Duty Lift Kit Built with stronger materials for tougher driving and heavier loads | Tema4x4 30mm Complete Lift Kit for Honda CR-V (2017–present) |  |
1. PRL Motorsports 1.6" Lift Kit for 2017-2022 Honda CR-V
Best Overall Lift Kit
| Automotive Fit Type | Vehicle Specific Fit |
|---|---|
| Set Name | PRL Motorsports Honda CR-V 1.6" Lift Kit |
| Model Number | 2017-2022 Honda CR-V 1.5T |
| Maximum Lifting Height | 1.6 Inches |
This PRL Motorsports lift kit raises the 2017–2022 Honda CR-V by 1.6 inches (40 mm) to give extra ground clearance and room for larger wheels and tires. It is a vehicle-specific kit intended to be used as a center lift solution that maintains factory suspension geometry rather than replacing struts or springs. Typical use is mild off-road clearance, better approach/departure clearance, and clearing slightly larger tire sizes while keeping a near-stock ride feel. The main benefit is a modest, factory-minded lift that avoids radical suspension changes and preserves daily drivability. Installation is generally straightforward for a competent DIYer or a shop familiar with lift components because the kit is built for this model range, though some alignment and minor adjustments are required after fitting. Limitations are the modest height increase—it will not substitute for a full suspension overhaul for heavy off-road use—and the kit focuses on center lift components rather than a full system, so it may not address every desired handling or load-carrying change.
Best for: Buyers who want a conservative, factory-friendly lift to gain clearance and fit slightly larger wheels while keeping the CR-V comfortable for daily driving and occasional light off-road use.
Less Ideal for: Drivers planning heavy off-road use, large tire conversions, or those who want a full suspension overhaul with significant lift and long-travel components.
- Vehicle-specific fit tailored for 2017–2022 Honda CR-V for simpler installation
- Modest 1.6 inch lift improves ground clearance without dramatically changing ride quality
- Designed to preserve factory suspension geometry and daily drivability
- Height increase is limited to 1.6 inches and is not suitable for serious off-road requirements
Verdict: The best all-around lift kit that balances ride quality, durability, parts completeness, and ease of installation for most buyers.
2. DEALPARTS 1.2" Polyurethane Leveling Lift Kit for Honda CR-V & Civic (Full Kit)
Best Budget Lift Kit
| Maximum Lifting Height | 1.2 Inches |
|---|---|
| Material Type | Polyurethane |
| Auto Part Position | Front, Rear |
| Included Components | Strut spacers, coil spacers, fitting kit |
This DEALPARTS lift kit uses polyurethane strut and coil spacers to add 1.2 inches of lift to compatible Honda models. Installation is straightforward for a competent DIYer or an independent shop because the kit contains two strut spacers, two coil spacers, and a fitting kit for a vehicle-specific fit. The polyurethane construction is corrosion resistant and engineered for a long service life, so it will preserve clearance for larger wheels, light off-road use, and improved approach angles without replacing factory springs or shocks. Expect modest visual lift and better clearance rather than major off-road performance. Because this is a spacer-style kit, it keeps factory suspension geometry mostly intact but will not change spring rates or dramatically improve heavy-load handling. Use it if you want a low-cost, reversible way to raise ride height on 2016–2022 CR-Vs and compatible Civics; skip it if you need heavy-duty lift, improved damping, or a complete suspension overhaul.
Best for: Buyers who need the most affordable, factory-friendly way to add about an inch of clearance to a 2016–2022 Honda CR-V or compatible Civic while keeping installation simple and reversible.
Less Ideal for: Drivers seeking a heavy-duty lift, improved load-carrying suspension, or significant off-road capability should consider a full suspension kit instead.
- Vehicle-specific fit with included fitting kit simplifies installation
- Polyurethane spacers resist corrosion and are marketed for long service life
- 1.2 inch lift provides usable extra ground clearance for larger wheels and light off-road use
- Spacer-style design does not change spring rates or shock performance
Verdict: The best low-cost lift kit for buyers prioritizing price while still getting a safe, reliable height increase and acceptable component quality.
3. maXpeedingrods Coilover Kit for Honda CR-V 2017–2022, 24-Position Adjustable Dampers
Best Premium Lift Kit
| Fitment | Honda CR-V 2017–2022 |
|---|---|
| Damping adjustment | 24 levels |
| Spring rate (front/rear) | 6 kg/mm (336 lbs/in) |
| Ride height adjustment | 1–3 inches |
This coilover kit replaces the CR-V's stock struts with threaded, height-adjustable units that let you lower the vehicle and fine-tune ride feel. It targets street performance with upgraded aluminum top plates, an easier-to-use damper knob, and high-tensile springs stress tested for longevity. Riders can choose from 24 damping positions to tailor comfort versus control and set 1 to 3 inches of ride-height change for a more aggressive stance. In everyday use the kit sharpens steering response and reduces squat under acceleration when dialed in, but softer rear settings can feel bouncy so some tuning is required. Installation may require minor adjustments to supplied sway bar end links and accessing the rear adjuster on a CR-V needs removing a brace, so professional installation or mechanical experience is recommended. Build quality and the tuning range make this a strong option for buyers seeking a sportier, durable setup, though expect extra setup time to achieve the best balance between comfort and firmness.
Best for: Drivers who prioritize a premium, tunable suspension for improved handling and a sportier look and are willing to invest time or professional labor to dial in settings.
Less Ideal for: Buyers who want a simple, drop-in replacement with factory ride height or those unwilling to adjust damping and hardware during installation.
- 24-position adjustable damper lets you dial comfort versus control for different driving conditions
- Upgraded full-aluminum top plates and improved damper knob for easier adjustment
- High-tensile springs tested for fatigue resistance to maintain spring shape over time
- Threaded ride-height adjustment provides 1–3 inches of lowering for a sportier stance
- Rear dampers can feel bouncy on soft settings and may require firm tuning
- Some supplied hardware like sway bar end links may need modification for correct fit
Verdict: The best premium lift kit for buyers willing to pay more for superior materials, refined suspension tuning, and long-term durability.
4. Tema4x4 20mm Front Strut and Rear Coil Spacer Lift Kit for Honda CR-V (Pair)
Best Complete Lift Kit
| Lift height | 20 mm (0.79 in) |
|---|---|
| Compatibility | Honda CR-V 2017–present |
| Material | Polyurethane |
| Included components | Front strut spacers, rear coil spacers, fitting kit |
| Warranty | 2 Year Manufacturer Warranty |
This Tema4x4 kit provides a simple, vehicle-specific way to raise a 2017–present Honda CR-V by 20 mm front and rear. It includes matching front strut spacers and rear coil spacers plus a fitting kit so installation uses factory mounting points and factory hardware. The polyurethane components are automotive grade and rated to resist UV, ozone, oils, and compression set across a wide temperature range, which helps maintain ride height and durability for light off-road use or when adding modest tire clearance. Expect a 2 to 3 hour bolt-on install for both axles when you have basic tools and a jack. The kit does not include shocks or new mounts, so it is best for owners who want a modest, affordable lift without changing damping; drivers seeking larger lifts or improved ride control will need additional suspension upgrades. The kit is compact, vehicle-specific, and backed by a two year manufacturer warranty for peace of mind.
Best for: Buyers who want a single, vehicle-specific package to add a small, consistent lift to a 2017–2022 Honda CR-V using factory mounting points and minimal extra parts. Ideal for owners looking for modest tire clearance or a slightly taller stance without a full suspension overhaul.
Less Ideal for: Drivers seeking a larger lift, improved ride damping, or a complete suspension overhaul should choose a kit that includes shocks, mounts, or matched damping components instead.
- Complete front and rear spacer set designed for balanced 20 mm lift
- Vehicle-specific fit uses factory mounting points and hardware for straightforward bolt-on installation
- Polyurethane construction resists UV, ozone, oils and compression set for long-term height retention
- Includes fitting kit and is backed by a 2 year manufacturer warranty
- Does not include shocks, strut mounts, or other damping components so ride quality and control are unchanged
Verdict: The best complete lift kit for buyers who want every required part—mounts, shocks/struts, spacers, and hardware—delivered in one package for a single installation.
5. DEALPAREX 1.2 inch Front Strut Spacers Leveling Lift Kit
Best Easy-Install Lift Kit
| Fitment | CR-V 2017-present, Civic 2016-2021, Breeze 2019-present, Insight 2018-2022, UR-V 2017-present |
|---|---|
| Lift Height | 1.2 inch (30 mm) |
| Position | Front |
| Material Type | Polyurethane |
| Included Components | 2 strut spacers, fitting kit |
This DEALPAREX leveling kit uses two polyurethane strut spacers and a fitting kit to raise the front of compatible Honda models by about 1.2 inches. It is a bolt-on style spacer that installs on top of the front strut assembly, so installation is generally a simple removal and reassembly of the strut mount with the spacer inserted between components. The high-density polyurethane material is corrosion-resistant and should resist road grime better than metal alternatives. Practical benefits include a modest increase in ground clearance to fit slightly larger wheels and tires and improved approach angles for light off-road or snowy conditions. Because it only lifts the front by a small, vehicle-specific amount, it preserves stock suspension geometry and ride quality more than larger lift systems, but it will not add heavy-duty wheel travel or change rear ride height. This kit is intended for DIYers with basic tools and a willingness to follow instructions; professional installation could still be preferable if you are uncomfortable disassembling struts or lack a spring compressor. The package includes spacers and a fitting kit but does not include additional hardware for rear lift or extended bump stops.
Best for: DIY-minded Honda owners who want a straightforward, bolt-on front lift to gain modest ground clearance and run slightly larger wheels without changing suspension tuning.
Less Ideal for: Drivers seeking large lifts, full suspension upgrades, or significant off-road performance should look at dedicated lift systems with new shocks and rear components.
- Vehicle-specific fit for selected Honda models simplifies selection and fitment.
- Simple bolt-on strut spacer design enables installation with basic garage tools.
- High-density polyurethane resists corrosion and should hold up to road exposure.
- Small 1.2 inch lift preserves original ride quality and steering geometry better than large lifts.
- Only lifts the front and does not address rear ride height or balance.
- Not a replacement for upgraded shocks or heavy-duty suspension for serious off-road use.
Verdict: The best easy-install lift kit for DIYers who want straightforward bolt-on components and clear instructions to complete the job with basic garage tools.
6. Tema4x4 30mm Complete Lift Kit for Honda CR-V (2017–present)
Best Heavy-Duty Lift Kit
| Lift height | 30mm |
|---|---|
| Material | Polyurethane (PU) |
| Included components | coil spacers, front strut spacers, strut spacers |
| Auto part position | Front |
This kit raises the front of a 2017–present Honda CR-V by 30mm using polyurethane strut spacers and coil spacers to increase ground clearance and allow larger wheels and tires. Installation is straightforward for a shop or a competent DIYer since it mounts as a spacer on the existing strut and coil assemblies rather than replacing the entire suspension. The polyurethane parts are more durable than basic plastic spacers and resist compression under load, which helps maintain the added ride height when you carry gear or encounter rough roads. Practical benefits include easier parking at high curbs, improved approach clearance on rough terrain, and a lifted look without changing suspension geometry drastically. Limitations are that this is a body/strut spacer-style lift only: it does not include reinforced control arms, extended brake lines, or heavy-duty hardware specifically rated for extreme towing or heavy commercial loads. Buyers wanting a full suspension upgrade for very heavy duty use will need a more comprehensive kit with reinforced components.
Best for: Buyers who want a straightforward, durable front lift to improve clearance and stance on a 2017–present CR-V and who prioritize rugged spacer materials over a full suspension overhaul.
Less Ideal for: Drivers who plan heavy towing, carry consistently large loads, or need a complete heavy-duty suspension rebuild should choose a kit with reinforced control arms and heavy-duty hardware instead.
- Adds a solid 30mm of front lift for increased ground clearance and room for larger wheels and tires
- Polyurethane spacers offer better durability and resistance to compression than basic plastic alternatives
- Simple spacer-style installation that can be completed by a shop or experienced DIYer without replacing struts
- Does not include reinforced suspension components or upgraded hardware for heavy towing or extreme off-road loads
Verdict: The best heavy-duty lift kit for buyers who need rugged components and reinforced hardware to handle heavier loads, rough roads, or more demanding use.
Choosing the Right 2017-2022 Honda CR-V Lift Kit: Key Factors to Consider
Lift Height and Intended Use
Choosing the right lift height determines what you can accomplish with your CR-V. A modest 1 to 1.5 inch lift mainly improves ride height for visual stance and slightly larger tires without drastically altering suspension geometry. Taller lifts, often 2 inches or more, provide room for significantly larger tires and extra ground clearance but increase the risk of affecting alignment and CV joint angles.
Think about where you will drive most often. If you commute and occasionally encounter rough gravel or snow, a smaller lift preserves ride comfort and steering predictability. If you plan regular light off-road use, a higher lift may be useful but expect more changes to handling and possible additional modifications such as extended bump stops or adjustable alignment components.
Compatibility With Larger Tires
One common reason CR-V owners lift their SUV is to fit wider or taller tires. Not all lifts create the same amount of usable clearance at the wheel opening. Some lift kits raise only the body or use spacers that change track width in different ways, while others include coil spring or strut modifications that alter suspension travel.
You need to match tire size goals to the actual clearance gained after installation. Also consider fender geometry and whether trimming or minor body modifications will be required. Proper fitment planning helps avoid rubbing under full lock or on compression, and reduces the need for repeated adjustments after alignment.
Ride Quality and Suspension Tuning
Lift changes the suspension's resting position, which can alter spring rates and damping characteristics. Kits that retain factory springs and shocks but add spacers can raise the ride height with minimal change in ride feel, though they may reduce suspension travel. Full coil spring or strut-based lifts replace or retune components and can maintain more consistent damping and articulation.
Consider how much on-road comfort you need. If the CR-V remains a daily driver, prioritize kits engineered to preserve the original ride balance. For heavier duty or off-road-oriented use, you may accept a firmer or more controlled feel in exchange for better wheel travel and resistance to bottoming out.
Installation Complexity and Tools Needed
Installation difficulty ranges from simple bolt-on spacer kits to systems requiring strut removal, spring compression, or specialized alignment work. Simpler kits may be installable with common hand tools and a weekend in the driveway. More involved kits often require spring compressors, a lift or jack stands, and alignment after installation.
Plan realistically for the time and tools you have. If you are doing the job yourself, choose a kit within your mechanical comfort level and follow torque and safety procedures closely. If professional installation is likely, factor in installation-related adjustments such as sway bar end link modifications and toe/camber correction into your decision.
Impact On Steering, Alignment, And Drivetrain
Raising the height of a unibody SUV like the CR-V influences steering geometry, driveshaft and CV joint angles, and alignment specs. Even modest lifts can change camber and toe settings, which may increase tire wear if not corrected. Some kits include components to compensate for these changes; others require aftermarket adjustable parts or a professional alignment.
Understand whether the kit maintains factory mounting points for steering and suspension components or if it necessitates supplementary corrective parts. Where drivetrain angles are affected significantly, you may notice vibrations or accelerated wear if the issue is not addressed.
Durability And Corrosion Resistance
Road salts, gravel, and moisture can accelerate wear on suspension components. Quality lift kits use durable materials and coatings to resist corrosion and mechanical fatigue. Fasteners, brackets, and spacer pieces should be finished to prevent early rusting, particularly in climates with harsh winters.
Examine the expected lifespan of components and whether replacement parts are readily available. Durable hardware and protective coatings reduce long-term maintenance and preserve the value of the CR-V's suspension investment.
How Lift Affects Daily Driving On The CR-V
Even modest lifts change handling characteristics on the CR-V. Higher center of gravity can lead to slightly increased body roll, and steering feedback may feel different if suspension heights or spring rates are altered. For everyday commuting, prioritize kits that keep damping and spring behavior close to stock so lane changes and highway stability remain predictable.
- Expect marginally reduced fuel economy with larger tires
- Check ride height impact on garage and driveway clearances
- Plan for a professional alignment after installation
Choosing Between Spacer, Coil Spring, And Strut-Based Kits
Spacer kits are the simplest option and can provide a quick height boost with minimal component replacement. Coil spring and strut-based kits often offer better long-term ride quality and articulation because they are designed to work with the suspension travel envelope. The choice should reflect your tolerance for complexity and how much off-road performance you need.
- Spacer kits: easier install, limited travel preservation
- Coil spring kits: more balanced ride and travel retention
- Strut-based kits: often best for larger lifts and heavier loads
Preparing Your CR-V For Installation
Before installing a lift, inspect suspension components for wear including bushings, ball joints, and struts. Replacing worn parts at the same time reduces the chance of handling issues after lifting. Ensure you have a proper jack, jack stands, torque wrench, and any recommended specialty tools if the kit requires spring removal.
- Replace worn rubber bushings before lifting
- Document factory alignment specs for reference
- Have replacement hardware and corrosion-resistant fasteners on hand
Tire And Fender Considerations For Taller Setups
Fitting larger tires often requires checking fender clearance at full compression and lock. You may need slight fender rolling or trimming to avoid rubbing during suspension articulation. Also consider wheel offset and backspacing when selecting wheels to ensure the tire sits correctly within the well without overstressing bearings or wheel studs.
- Measure clearance with full steering lock and suspension compression
- Consider narrower tire profiles to reduce rubbing risk
- Maintain appropriate load ratings for heavier tires
Legal And Safety Notes Specific To The 2017-2022 CR-V
Lift regulations vary by jurisdiction; verify allowable vehicle height and headlamp aim requirements where you live. Changes in ride height can affect bumper and sensor positions, and you should confirm that any modifications do not interfere with safety systems or violate local rules. Keep documentation of the installed kit and alignment for inspections.
- Check local vehicle height laws before modifying
- Verify sensor and headlamp functionality after installation
- Retain installation records for resale or inspections
Still looking for the perfect fit?
Select your Honda CR-V configuration to see the most relevant Lift Kits recommendations
How We Chose the Best 2017-2022 Honda CR-V Lift Kit
We focused on lift kits designed specifically for the 2017-2022 Honda CR-V and evaluated them across multiple practical criteria owners care about. Key evaluation factors included lift height and how it affects alignment and steering geometry, compatibility with larger tires, installation complexity and required tools, and the kit's impact on ride comfort and handling during everyday driving. We also considered component durability for road salt and rough roads, warranty coverage or manufacturer support, and whether the kit preserves factory mounting points and sensor functionality. Kits that required extensive cutting, custom fabrication, or changes to critical steering components were excluded unless they offered clear benefits for off-road capability. We prioritized options that balance improved clearance with predictable on-road manners and realistic installation requirements.
Our full evaluation process is outlined in our review methodology.
FAQ
Will a small lift void my 2017-2022 CR-V warranty?
Minor lift kits that do not directly alter covered components typically do not automatically void a vehicle warranty, but warranty coverage can depend on what fails and why. If a modification is found to cause damage to a warranty-covered part, that specific repair could be denied. Keep records of installation and consult your warranty terms if in doubt.
Can I install a lift kit at home or should I use a shop?
It depends on the kit and your experience. Spacer-style lifts with basic tools are often DIY-friendly. Kits requiring strut removal, spring compression, or alignment adjustments are safer with a professional installer who has proper tools and alignment equipment. Consider your comfort level and safety when deciding.
How does lifting affect alignment and tire wear?
Lifting changes ride height and can alter toe and camber settings, which may increase uneven tire wear if not corrected. A professional alignment after installation helps restore proper geometry and reduces the risk of premature tire wear.
Will lifting my CR-V improve off-road ability?
A lift can help clear obstacles and fit larger tires, which improves capability on mild off-road routes. The CR-V is a compact SUV with limited heavy-duty off-road design, so larger lifts may provide marginal gains but also increase the likelihood of chassis limitations and handling compromises.
Do I need new shocks with a lift kit?
Some kits are designed to work with factory shocks for small lifts, while larger lifts usually pair better with upgraded shocks or strut assemblies to maintain appropriate damping and travel. Check the kit requirements and your driving needs before deciding.
How much does lift kit installation typically affect center of gravity and rollover risk?
Any lift raises the center of gravity slightly, which can increase body roll and affect emergency handling. The extent depends on lift height and tire size. Modest lifts result in small changes, while larger lifts have more noticeable effects. Drive conservatively and consider suspension tuning to mitigate handling changes.
Final Verdict
For 2017-2022 Honda CR-V owners, the right lift kit balances the clearance and tire-fit gains you want with minimal compromise to ride comfort and steering predictability. Prioritize options that match your daily driving needs and the specific tire sizes you intend to run, and plan for a professional alignment and inspection after installation. Ultimately, choose a kit that provides the required clearance while keeping suspension geometry and drivetrain angles within safe limits. That approach delivers the best mix of capability and long-term reliability for your CR-V.
Explore More:
- Check out all Honda CR-V parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
