Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
When you drive a Nissan Titan, carrying extra fuel can extend range and reduce anxiety during long trips or remote work. Choosing the right jerry can matters because poor fitment, insecure mounting, or the wrong material can create safety hazards and handling problems. This guide highlights six shortlisted options that balance capacity, durability, and vehicle-specific mounting considerations. We evaluated build quality, mounting compatibility, and user handling to narrow the list to the top picks. Read on for the features and fitment details to consider before adding a jerry can to your Titan.
Looking for other parts? See all Nissan Titan parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Mayouko Lockable 20L Steel Jerry Can Holder Rack |  |
| Best Quality Built to a higher standard if you want something more solid | Smittybilt Jerry Can Holder (SB2798) |  |
| Best Budget The cheapest option that still gets the job done reliably | WINMAX Alloy Steel 5-Gallon Jerry Can Holder |  |
| Most Sold A high-volume bestseller chosen again and again | Atlantic British Valpro JC0010HV 2.5 gal (10 L) Jerry Can Holder |  |
| Best Value for Money The sweet spot between price and what you get | Racewill Lockable Jerry Can Mount Holder for 5-Gallon Cans |  |
| Best Overall The best all-around choice for most situations | Wavian USA 20L NATO-Style Metal Jerry Can with Spout |  |
1. Mayouko Lockable 20L Steel Jerry Can Holder Rack
| Capacity | 20 Liters |
|---|---|
| Manufacturer | Mayouko |
| Batteries required | No |
This Mayouko holder is a welded cold-rolled steel rack that secures a 20 L NATO-style jerry can with a top locking bar and pre-drilled mounting points. It is typically attached to a truck bed, cargo box, or trailer using the four or more mounting holes and upgraded stainless steel screws to resist rust. In real use it keeps a metal fuel can stable during highway runs and light off-road use and allows you to add a padlock to deter theft. Installation is straightforward and can be completed with basic hand tools in minutes. The unit is a practical choice when you want a factory-quality mount without fabric straps or clumsy brackets, but some buyers report the outer ring can deform under heavy off-road abuse and the holder does not include straps or a padlock. Expect a sturdy, simple way to carry a single NATO-style can on a Nissan Titan, but consider reinforcing the mount if you plan aggressive off-road use or heavy vibration conditions.
Best for: Reliability-focused buyers who prioritize a secure, factory-quality mounting solution for carrying a single 20 L steel jerry can on a Nissan Titan during road trips, work runs, or overland outings.
Less Ideal for: If you need a freestanding carrier, multi-can transport system, or plan sustained extreme off-road use without reinforcement, choose a heavier duty commercial mounting system instead.
- Made from cold-rolled steel for a secure, rigid frame
- Pre-drilled mounting points for straightforward installation on truck beds or cargo boxes
- Lockable top bar lets you secure the can with your own padlock
- Upgraded stainless steel screws reduce corrosion risk at mount points
- Not fully freestanding and may need additional bracing for heavy off-road use
- Does not include straps, padlock, or mounting hardware beyond screws
- Outer ring has bowed for some users under high stress, indicating limited heavy-duty resilience
Verdict A practical, lockable steel rack that reliably secures a 20 L NATO-style jerry can to a Nissan Titan but may need reinforcement for aggressive off-road duty.
2. Smittybilt Jerry Can Holder (SB2798)
| Material | Alloy Steel |
|---|---|
| Special Feature | Detachable |
| Finish Type | Powder Coated |
| Mounting Type | Floor Mount |
The Smittybilt Jerry Can Holder is a full-metal rack that secures a 5-gallon steel fuel can with a lockable top strap and multiple mounting holes for vehicle attachment. It is typically mounted to a spare-tire plate, bumper, ladder rack, or other Nissan Titan-compatible mounting point to extend range on long trips or remote work sites. Notable features include welded alloy-steel construction, a powder-coated finish to resist corrosion, rubber isolators to reduce metal-on-metal wear, and a detachable design for easy removal. In practice it holds a standard 5-gallon steel can securely and offers theft deterrence with the lockable strap, while the variety of mounting holes makes it straightforward to adapt to Titan mounting points. Limitations to expect are occasional fitment differences with nonstandard cans, some buyers report thin or weak welds at hinge points that may need reinforcement, and the rubber pads can come loose when removing the can frequently. For performance-focused Titan owners who carry extra fuel, this holder delivers a rugged, adaptable solution but may need minor user modifications for long-term durability or nonstandard containers.
Best for: Performance-oriented buyers who prioritize increasing driving range and reliability on long trips for their Nissan Titan and want a sturdy, adaptable mount for a metal 5-gallon fuel can.
Less Ideal for: Those seeking a maintenance-free, lifetime solution or a precise fit for every brand of plastic fuel container should consider purpose-built Titan-specific mounts or higher-end welded designs instead.
- Full metal alloy-steel construction for rugged use
- Powder-coated finish helps resist corrosion in outdoor conditions
- Lockable top strap provides basic theft deterrence
- Multiple mounting holes for flexible attachment to vehicle mounting points
- Detachable design allows removal when not needed
- Some customers report weak welds at hinge or strap points that may require reinforcement
- May not fit every plastic or nonstandard jerry can without modification
- Rubber isolator pads can fall out with frequent can removal
Verdict A rugged, adaptable steel holder that reliably carries a 5-gallon metal jerry can on a Nissan Titan but may need minor reinforcement or can-specific tweaks for long-term use.
3. WINMAX Alloy Steel 5-Gallon Jerry Can Holder
| Material | Alloy Steel |
|---|---|
| Capacity | 5 Gallons |
| Automotive Fit Type | Universal Fit |
This WINMAX holder is a simple, full-metal carrier designed to secure a 5-gallon steel jerry can to a vehicle. It bolts down using the pre-drilled base and holds the can with a lockable top strap, making it suitable for carrying an extra tank for longer trips or emergency reserve fuel. The powder-coated alloy steel construction resists corrosion better than bare metal and the heavy-duty base and strap keep the can stable under normal road conditions. Some users report fitment quirks with certain can designs and a handful of parts can be slightly out of square, so expect minor post-purchase adjustments when matching it to different jerry cans or mounting points. The universal mounting pattern gives flexibility for installing on bumpers or bed racks, but you may need to drill or re-space holes to align with Nissan Titan mounting locations. For the price this holder delivers rugged construction and theft-prevention capability, though it is not a precision, vehicle-specific accessory.
Best for: Practical, budget-conscious buyers who want an affordable, sturdy way to carry an extra 5-gallon fuel can on a Nissan Titan for extended trips or emergency reserve fuel.
Less Ideal for: Buyers seeking a vehicle-specific, drop-in solution or perfect factory-fit mounting should consider a Titan-dedicated bracket from the dealer or a precision aftermarket supplier.
- Powder-coated alloy steel construction improves corrosion resistance compared with unfinished metal
- Lockable top strap secures the can and deters theft
- Pre-drilled base and heavy-duty frame provide a stable mounting platform for road use
- Holds standard 5-gallon steel jerry cans and also fits some smaller NATO-style cans
- Not perfectly universal—some cans require strap or tab modification to latch correctly
- Pre-drilled hole spacing and welds can be out of square, requiring minor drilling or adjustment
- May show internal rust over long-term heavy exposure despite the coating
Verdict A tough, budget-friendly steel carrier that secures a 5-gallon jerry can for Nissan Titan owners who value cost and function over a perfect vehicle-specific fit.
4. Atlantic British Valpro JC0010HV 2.5 gal (10 L) Jerry Can Holder
| Fits jerry can | 2.5 gal (10 L) Wavian or NATO European cans |
|---|---|
| Material | Steel |
| Mounting | Predrilled screw holes for bolting |
| Exterior | Painted |
This steel Valpro jerry can holder is built to carry a 2.5 gallon (10 liter) Wavian or NATO European can and fastens to a rack or truck bed using predrilled screw holes. It holds the can by the sides with rubber/plastic bumpers to prevent scratching and dampen vibration, and a locking strap secures the handle and keeps the can from rocking during off-road travel. Installation is straightforward for anyone comfortable drilling and bolting to a Nissan Titan bed rack or crossbar, and the painted finish resists surface corrosion for typical outdoor use. The latch accepts a small padlock for basic deterrence but the strap and thin metal are not intended to resist a determined thief or heavy prying tools. Size and weight mean it is best mounted where there is adequate clearance; it is sturdy and stable when bolted down but not optimized for concealed or theft-proof storage. For everyday recovery fuel or oil carriage on a Titan, it is a practical, well-finished mounting solution with a simple, serviceable design.
Best for: A risk-averse mainstream buyer who wants a simple, factory-quality way to carry a small reserve can on a Nissan Titan for routine trips, overlanding, or emergency fuel without complicated installs.
Less Ideal for: Buyers who prioritize maximum theft protection or need a low-profile concealed fuel solution should consider heavier security mounts or lockable boxes instead.
- Made from steel with painted finish for durability in outdoor use
- Rubber/plastic bumpers prevent scratching and reduce rattling
- Predrilled mounting holes for direct attachment to a rack or truck bed
- Locking strap secures the can handle and helps keep the can stable on rough roads
- Locking strap and thin metal offer only basic theft deterrence and can be pried with tools
- Not suitable where strict theft resistance or concealed storage is required
Verdict A sturdy, easy-to-mount steel holder that securely carries a 10 L Wavian/NATO can on a Nissan Titan but provides only basic theft deterrence.
5. Racewill Lockable Jerry Can Mount Holder for 5-Gallon Cans
| Mounting Type | Wall Mount, Corner Mount |
|---|---|
| Finish Type | Powder Coated |
| Manufacturer | Racewill |
| Fits | 5 Gallon Jerry Can |
This Racewill jerry can mount is a steel rack that holds a single 5-gallon NATO-style can and uses a U-bayonet lock and tamper-resistant stainless screws to deter theft. It installs on flat surfaces such as a truck bed wall or corner and is intended for permanent or semi-permanent mounting. The powder-coated finish helps resist corrosion and the reinforced welds give it a solid feel in daily use. Practical touches include a detachable top retainer so you can remove the can without unbolting the whole frame and a compact footprint that saves bed space. Limitations: hardware is not included in the kit so you need to supply bolts and possibly threadlocker, and some buyers report the sheet metal around bolt holes can be thin and tricky to align when drilling in non-flat locations. Fit can also vary between can brands so expect minor adjustments for a snug closure. For mounting in a Nissan Titan bed, plan the hole locations, use stout fasteners, and check clearance with any bed accessories before final installation.
Best for: A practical optimizer who wants a secure, low-cost way to carry an extra 5-gallon fuel or water can on a Nissan Titan and values theft protection and compact storage over a finished turnkey mounting kit.
Less Ideal for: Buyers seeking a ready-to-install solution with included hardware or those who prefer an adjustable universal carrier for multiple can sizes should consider other options.
- Lockable U-bayonet and stainless screws provide theft deterrence for mounted 5-gallon cans
- Powder-coated cold-rolled steel construction with reinforced welds for corrosion resistance and strength
- Detachable top retainer allows quick removal of the can without unbolting the frame
- Compact, space-saving design suitable for truck bed mounting
- Mounting hardware is not included so bolts and fasteners must be provided separately
- Some customers report thin metal around bolt holes and difficult alignment during installation
- May require minor modification to fit certain can brands tightly
Verdict A budget-friendly, lockable steel rack that secures a 5-gallon can in a Nissan Titan bed but requires you to supply hardware and may need slight adjustments for perfect fit.
6. Wavian USA 20L NATO-Style Metal Jerry Can with Spout
| Capacity | 20 Liters |
|---|---|
| Fuel Type | Gasoline |
| Exterior | Powder coat paint |
| Manufacturer | Wavian USA |
The Wavian USA 20L jerry can is a heavy-duty, NATO-style metal fuel container built for long-term use and secure fuel transfer. Made from cold-rolled steel with an anti-corrosive powder coat, it holds roughly five gallons and uses a bayonet-style quick-release nozzle with a safety lock to reduce spills. In practice this can sits well during offroad trips in a truck bed or mounted to a carrier and resists denting and corrosion better than plastic alternatives. The spout is self-venting which speeds pours, though some users find the included plastic pour adapter and storage clip fiddly or short for certain fill points. The can can become slightly pressurized in changing altitude so open it slowly to avoid spurting. EPA and CARB compliance make it legal for road use. For running long distances or emergency fuel for a Nissan Titan, it is dependable, but expect to buy a longer or improved spout and possibly a better nozzle clip if you need easier pouring into tight filler necks.
Best for: Balanced buyers who want a durable, road-legal metal jerry can that will stand up to offroad use and provide reliable emergency fuel for a Nissan Titan.
Less Ideal for: If you need an ultra-lightweight or single-handed portable solution for small errands, a compact plastic container or purpose-built portable fuel tank may be a better fit.
- Robust 0.9mm cold-rolled steel construction with anti-corrosive powder coat for long service life
- Bayonet-style quick-release spout and safety lock for spill-reduced transfers
- EPA and CARB compliant for legal on-road fuel transport
- Self-venting nozzle speeds pours and helps prevent glugging during transfer
- Included plastic pour adapter and storage clip are flimsy and may require replacement
- Spout length may be short for some vehicle filler locations, so an aftermarket longer spout can be necessary
- Can build internal pressure with altitude change so it must be opened carefully to avoid splashing
Verdict A rugged, factory-quality 20L metal jerry can that is ideal for reliable long-range or emergency fuel storage for a Nissan Titan, but plan to upgrade the spout or clip for easier pours.
Choosing the Right Nissan Titan Jerry Can: Key Factors to Consider
Capacity and Range
Capacity determines how far the extra fuel will extend your driving range and affects weight and handling when mounted on a Nissan Titan. Larger cans increase range but add significant weight that affects mounting choices, center of gravity, and ease of removal. Choose a capacity that matches typical trip lengths and the lifting ability of those who will handle the can. Consider whether you prefer multiple smaller cans for flexibility or a single larger can for maximum range. Also think about usable volume versus rated volume, since some practical loss occurs during pouring and due to internal baffling.
Material and Corrosion Resistance
The construction material affects durability, compatibility with different fuels, and long-term corrosion resistance in outdoor conditions. Metal cans are typically robust and resist impact, but they must be properly coated or treated to avoid rust, especially if exposed to moisture or road salt. Plastic fuel cans resist corrosion and are lighter, though they must be made from fuel-resistant polymers to avoid degradation over time. Assess the tradeoff between impact resistance and corrosion maintenance based on how and where you store the can on your Titan.
Mounting and Fitment
How the can mounts to your truck is critical for safety and convenience. Look for attachment options that match your Titan's bed, tie-down points, or roof rack configuration to prevent shifting under load. Secure mounting reduces the chance of leaks, minimizes movement during off-road travel, and makes filling procedures safer. Consider whether you need quick-release brackets for frequent removal or welded mounts for a permanent installation. Verify clearance, orientation, and access to the spout once mounted to ensure practical use.
Spout, Pouring, and Venting Design
A well-designed spout and venting system makes refueling safer, faster, and less messy. Look for features that provide controlled flow and reduce splashing when transferring fuel into a vehicle tank. Built-in venting or pressure-relief mechanisms help maintain steady flow and reduce glugging, which shortens fill time and lowers spill risk. Consider whether included accessories like flexible spouts or fuel transfer nozzles meet your needs, and whether they store securely on the can to prevent damage or contamination.
Seal Integrity and Safety Features
Reliable seals and closures prevent leaks and vapors from escaping, which is essential for safe vehicle mounting and transport. Inspect closure mechanisms for robust threads, gasket quality, and secondary locking features that keep caps sealed under vibration. Safety features such as flame mitigation devices, child-resistant closures, and clear fill indicators can add protection and convenience. Prioritize cans with proven sealing designs to reduce maintenance and the risk of fuel odor or loss.
Handling and Ergonomics
Ergonomics determine how easily you can carry, position, and pour the can by yourself. Handle placement, grip shape, and weight distribution when full all influence how manageable a can is during routine use. Look for designs with multiple handles or molded grips that aid lifting and two-person handling if needed. Consider the can's dimensions relative to storage locations on the Titan to ensure you can remove and replace it without awkward maneuvers.
FAQ
Can I mount a jerry can inside my Nissan Titan bed safely?
Yes, you can safely mount a jerry can in the truck bed provided you use a proper mounting system designed for vehicle use. Ensure the mount secures the can from movement, keeps the spout covered, and maintains ventilation. Position the can to avoid contact with sharp edges and check seals regularly to prevent leaks.
Are metal jerry cans better than plastic for truck use?
Metal cans are often more impact resistant and may handle rough use well, while plastic cans resist corrosion and are lighter. The best choice depends on how you plan to use and store the can on your Titan, and whether you need extra impact durability or easier handling when lifting and mounting.
How do I prevent fuel vapors when storing a jerry can on my vehicle?
To minimize vapor release, choose a can with a reliable sealing cap and a venting system that controls pressure without allowing continuous leakage. Store the can upright and secure it to reduce vibration. Inspect seals periodically and replace any degraded gaskets to maintain an airtight closure.
What spout features should I look for on a portable fuel container?
Look for spouts that offer controlled flow, a secure attachment to the filler opening, and an integrated vent or anti-glug feature. Flexible spout extensions help reach awkward filler necks, and spout storage that latches to the can keeps debris out. A design that prevents dripping during stowage is also helpful.
Is it better to carry multiple small cans or one large jerry can?
Multiple smaller cans offer flexibility, easier lifting, and redundancy if one is damaged, while a single larger can provides more range but is heavier and harder to handle. Consider how often you will remove the cans, how much spare capacity you need, and the mounting options available on your Titan when deciding.
How We Chose the Best Nissan Titan Jerry Can
To assemble this list we focused on jerry cans that meet the practical needs of Nissan Titan owners on and off-road. Key evaluation criteria included capacity options suitable for truck use, mounting and attachment systems compatible with common truck racks and bed configurations, construction material and corrosion resistance for long-term durability, fuel-safe fittings and spouts for controlled pouring, and ease of handling including grip and weight distribution when full. We also considered spill prevention features and ventilation design to reduce vapor buildup and make filling safer. Exclusions: we excluded containers that lack clear vehicle-mounting options, models without secure sealing mechanisms, and items intended only for single-use or non-vehicle storage. The resulting shortlist favors cans that combine secure mounting, safe fuel handling, and durable materials appropriate for repeated road and off-road use.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right Nissan Titan jerry can means balancing capacity, construction, and how you intend to mount and handle the can. Prioritize secure mounting and reliable seals first, since these directly affect safety and daily usability. Then weigh material, pouring features, and ergonomics based on whether you need maximum range, easier handling, or long-term corrosion resistance.
Explore More:
- Check out all Nissan Titan parts & accessories
- Explore Exterior Accessories
- Browse all Accessories
