Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Upgrading your Kia Soul door speakers can transform how music sounds in everyday driving, improving clarity, bass, and overall listening comfort. Picking the right speakers matters because fitment, power handling, and mounting depth affect installation ease and long-term performance. This guide presents seven shortlisted options that meet common fitment and performance needs. We evaluated each choice for power handling and installation compatibility, along with sound balance and durability. Read on to see which types and specifications match your goals before you open the doors for replacement.
Looking for other parts? See all Kia Soul parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | GM Genuine Parts 19116642 Front Door Speaker |  |
| Most Popular A crowd favorite that many people choose with confidence | BOSS Audio Systems NX654 6.5" Onyx Series Car Door Speakers (pair) |  |
| Best Quality Built to a higher standard if you want something more solid | H YANKA HCM-65 6.5 Component Car Speakers (Set) |  |
| Best Budget The cheapest option that still gets the job done reliably | Pyle 6.5" 3-Way Triaxial Car Speakers (pair) PL613BK |  |
| Most Sold A high-volume bestseller chosen again and again | Alphasonik AS265P 6.5" 3-Way Car Coaxial Speakers (4-Pack) |  |
| Best Value for Money The sweet spot between price and what you get | BOSS Audio Systems CH6530B 6.5" 3-Way Coaxial Car Speakers (Pair) |  |
| Best Overall The best all-around choice for most situations | Kenwood KFC-1666S 6.5" 2-Way Car Door Coaxial Speaker (pair) |  |
1. GM Genuine Parts 19116642 Front Door Speaker
| Speaker Type | Coaxial |
|---|---|
| Impedance | 4 Ohms |
| Speaker Size | 10.4 Inches |
| Power Source | Corded Electric |
| Audio Driver Type | Dynamic Driver |
This GM Genuine Parts front door speaker is a direct-replacement vehicle speaker engineered to match factory fit and sound. It is typically used as a plug-and-play replacement for a vehicle's front door speaker to restore audio clarity after a failed or degraded original unit. The speaker is a coaxial, dynamic-driver design with a 4 ohm impedance and a 10.4-inch woofer that reproduces midrange and bass from the factory audio system. Because it is built to GM factory specifications and branded by ACDelco/GM Genuine Parts, you get predictable fitment and straightforward installation without adapter plates or rewiring in supported vehicles. Practical benefits include reliable compatibility, conservative sound tuning that matches the vehicle's stock amplifier, and the backing of manufacturer validation. Limitations are that this part is a factory-style replacement rather than a performance upgrade, so it may lack the power handling, extended bass, or refined high-frequency detail audiophiles expect, and some users report shorter service life under heavy daily use.
Best for: Reliability-focused buyers who prioritize predictable, factory-quality replacements and minimal installation hassle for maintaining a dependable daily driver audio system.
Less Ideal for: Buyers seeking a high-performance audio upgrade, deep low-frequency bass, or long-term enthusiast-level durability should consider aftermarket speakers designed for higher power handling and sound refinement.
- Factory-validated fit and form for straightforward, plug-and-play installation
- Coaxial dynamic driver tuned for balanced, factory-style sound
- 4 ohm impedance matches common vehicle head units and amplifiers
- Manufactured by a recognized OEM supplier for consistent quality
- Designed as a stock replacement and not intended as a high-performance aftermarket upgrade
- Some customers report limited long-term durability with heavy daily use
Verdict A factory-quality, plug-and-play front door speaker best for drivers who want reliable, stock-like sound and fit rather than an aftermarket performance boost.
2. BOSS Audio Systems NX654 6.5" Onyx Series Car Door Speakers (pair)
| Speaker Size | 6.5 Inches |
|---|---|
| Impedance | 4 Ohms |
| Speaker Maximum Output Power | 400 Watts |
| Frequency Response | 45 Hz |
The BOSS NX654 speakers are a budget-friendly 6.5-inch coaxial set meant for door-mount replacement in everyday cars. They deliver a punchier sound than many factory units thanks to a claimed 400 watts max output per pair and a 4-way driver design that includes a tweeter for upper frequencies and a mid/woofer for lows. Typical use is as a direct upgrade to stock door speakers in compact vehicles; they will provide louder, more present midbass and clearer highs when paired with a head unit or modest amplifier. Notable features include a rubber surround, a 6.5-inch poly cone and a 4 ohm impedance that matches most factory wiring. Practical benefits are clearer vocals, stronger presence at low to mid volumes, and a straightforward install into common 6.5-inch door locations. Important limitations are variable build longevity and inconsistent quality control reported by users, and the max-power spec is marketing-oriented so they benefit from conservative amp matching rather than being overdriven. Fitment in some doors may require minor trimming or spacers due to magnet size.
Best for: Convenience-driven buyers who want an easy, affordable sound upgrade for their Kia Soul without complex tuning or extensive system changes; ideal for drivers who prioritize clearer music and louder volume from factory door locations.
Less Ideal for: Audiophiles seeking precise, reference-level sound or anyone planning to push very high continuous power should consider higher-end speakers and a matched amplifier instead.
- 6.5-inch full-range 4-way design offers better high and mid detail than many stock speakers
- Rubber surround and stamped basket help durability and reduce resonance
- 4 ohm impedance matches standard car head units without rewiring
- Sold as a pair for straightforward two-door or front-door replacement
- Compatible with added amplification for improved bass and volume control
- Reported variability in long-term reliability and occasional failures under heavy use
- Power ratings are peak/max figures and not a reliable indicator of continuous performance
Verdict A cheap and simple front-door upgrade for a Kia Soul that delivers louder, clearer sound than stock speakers but favors affordability over long-term audiophile-grade reliability.
3. H YANKA HCM-65 6.5 Component Car Speakers (Set)
| Speaker Type | 6.5 Component Car Speakers |
|---|---|
| Impedance | 4 Ohms |
| Sensitivity | 92dB (1W/1M) |
| Frequency Response | 50Hz-20kHz |
| Tweeter Type | Silk dome tweeters |
The H YANKA HCM-65 is a 6.5-inch component speaker kit intended to replace factory door speakers and deliver a noticeable step up in clarity, imaging, and low-end presence. The set includes two midrange woofers, silk-dome tweeters, and inline two-way crossovers so you can mount mids in the Kia Soul door locations and position the tweeters for a wider soundstage. Fiberglass cones, butyl rubber surrounds, large neodymium magnets, and a coil cooling system aim to keep mid-bass tight under higher power. With a stated 300W RMS (600W peak) and 50Hz to 20kHz response, these will sound punchy on pop and electronic music and articulate on vocals when paired with a decent head unit or small amplifier. Installation is typical for 6.5 component kits but may require adapter plates or minor trimming to match Kia Soul door depth and mounting points. The included crossovers simplify setup, though users planning heavy amplification should consider heavier gauge wiring and a quality amplifier to fully realize the speakers' potential. These deliver high-end performance for a door upgrade but benefit from careful installation and proper power.
Best for: Performance-oriented buyers who prioritize clearer imaging, stronger bass, and an upgradeable system for their Kia Soul and are prepared to pair the speakers with a proper head unit or amplifier.
Less Ideal for: Buyers seeking a simple, no-modification drop-in replacement or those unwilling to install adapter plates or source heavier wiring and amplification should consider a different option.
- Component design with separate tweeters and crossovers improves imaging and soundstage compared with coaxial factory speakers
- Fiberglass cones, butyl rubber surrounds, and neodymium magnets for stronger bass response and long-term durability
- Broad frequency response (50Hz–20kHz) and 92dB sensitivity make them responsive with both factory head units and aftermarket amps
- Includes crossovers and mounting options for easier setup during a door speaker upgrade
- Speaker wires supplied for tweeters and woofers are thin and may need replacement for high-power installs
- May require adapter plates or minor trimming to fit Kia Soul door depths and mounting points exactly
Verdict A performance-focused 6.5 component kit that brings clearer highs and punchier mids to a Kia Soul door upgrade but performs best with careful installation and proper power.
4. Pyle 6.5" 3-Way Triaxial Car Speakers (pair) PL613BK
| Speaker Size | 6.5 Inches |
|---|---|
| Impedance | 4 Ohms |
| Power Handling | 150 W RMS / 300 W Peak |
| Sensitivity | 89 dB |
| Mounting Depth | 2.13 Inches |
These Pyle 6.5" 3-way triaxial speakers are a low-cost, drop-in option for replacing factory door speakers in a Kia Soul. They combine a 1" neodymium midrange, 3/4" piezo tweeters, and a 6.5" woofer to broaden the frequency coverage compared with single-cone stock speakers. The package includes grills, wiring, and mounting hardware for a straightforward door installation and the 2.13" mounting depth keeps fitment simple in most door locations. In use the speakers can play loudly and clearly for casual listening and benefit from a claimed 150 W RMS/300 W peak handling and 89 dB sensitivity, so they respond well even to modest factory head units. Important limitations are variable long-term durability and bass depth compared with higher-end options, and some users report inconsistent quality control and occasional early failures when driven hard. Expect a clear, affordable upgrade for daily listening but not the deep low-end or refinement of premium component systems.
Best for: Budget-conscious buyers who want an easy, noticeable upgrade from factory door speakers in a Kia Soul without adding an external amplifier or complex installation.
Less Ideal for: Audiophiles seeking deep bass, maximum clarity, or long-term high-power reliability should consider higher-end component speakers and a dedicated amplifier instead.
- Designed to fit standard 6.5" door locations for simple replacement
- Includes grills, cables, and mounting hardware for plug-and-play installation
- 3-way triaxial design (woofer, midrange, tweeter) improves clarity over typical stock speakers
- Relatively high power handling for the price, so it can play loud with factory head units
- Piezo tweeters and plastic construction limit high-frequency fidelity compared with true silk or metal dome tweeters
- Shallow bass response and less low-end impact than larger or component speakers
- Mixed long-term reliability reported when pushed at high volumes
Verdict A wallet-friendly, easy-to-install door speaker upgrade for Kia Soul owners who want louder, clearer sound without upgrading their amplifier.
5. Alphasonik AS265P 6.5" 3-Way Car Coaxial Speakers (4-Pack)
| Speaker Type | Coaxial 3-way |
|---|---|
| Speaker Size | 6.5 Inches |
| Impedance | 4 Ohms |
| Tweeter Diameter | 1 Inches |
| Sensitivity | 92 dB |
The Alphasonik AS265P is a 3-way, four-speaker package intended as a direct-style replacement for factory door speakers. Each 6.5" speaker uses a polypropylene cone with a 1" polyetherimide tweeter and a ferrite magnet to deliver a claimed 35 watts RMS (350 watts peak per speaker) and a sensitivity around 92 dB, which helps them play louder from a stock head unit. Installation is straightforward for a typical door swap and the kit includes grilles, mounting hardware, and pigtails to simplify wiring. In practice these speakers give noticeably clearer mids and highs than many base-model door speakers and hold up well at moderate volumes without harsh distortion. Limitations are expected: bass depth is limited compared with larger woofers or a subwoofer, and the ferrite magnet design increases magnet size which can cause fitment constraints in very shallow door pockets. They are not a high-end audiophile upgrade but they are a practical, reliable step up over stock units for everyday driving with modest power sources.
Best for: A risk-averse mainstream buyer seeking a dependable, factory-style sound upgrade for daily driving who prioritizes ease of installation and predictable, balanced performance.
Less Ideal for: Audiophiles chasing deep low-end or maximum power handling and anyone planning a high-power amplified system without upgrading to speakers designed for that use.
- Includes four 6.5" speakers with grilles and mounting hardware for a complete door replacement set
- Polypropylene cone and polyetherimide tweeter combination delivers clear mids and defined highs
- High sensitivity (about 92 dB) makes them louder from a factory head unit without an amplifier
- Universal mounting holes and included pigtails simplify installation in many vehicles
- Bass output is limited compared with dedicated subs or larger woofers
- Ferrite magnet design can be bulky and may require checking clearance in tight door spaces
Verdict A practical, easy-to-install door speaker kit that reliably improves clarity over stock speakers but will not replace a sub or a high-end component system.
6. BOSS Audio Systems CH6530B 6.5" 3-Way Coaxial Car Speakers (Pair)
| Speaker Size | 6.5 Inches |
|---|---|
| Impedance | 4 Ohms |
| Speaker Type | Coaxial |
| Tweeter Diameter | 0.5 Inches |
| Surround Sound Channel Configuration | 3.0 |
The BOSS CH6530B is a 6.5-inch, 3-way coaxial speaker pair intended as a straightforward door-speaker upgrade. It uses a poly injection woofer with a rubber surround, a polyimide midrange and a 0.5-inch piezo tweeter to extend clarity across mids and highs while remaining an affordable, easy-to-install wired replacement. Typical use is direct swap into door locations with common adapter rings and standard wiring from a factory head unit. Buyers will notice clearer vocals and treble compared with worn factory speakers and a sensitivity that plays reasonably loud from an unamplified head unit. Important limitations are its economy construction and piezo tweeter design, which deliver good value but will not match the refinement or deep low-bass of higher-end component systems, and longevity can vary depending on installation and power levels. For Kia Soul door upgrades where you want a clear, low-cost step up from stock speakers, these offer an effective improvement with simple installation.
Best for: Practical optimizers who want the most audible upgrade per dollar for their Kia Soul doors and prefer simple, largely DIY installation over expensive component systems.
Less Ideal for: Audiophiles seeking deep bass and studio-level accuracy or owners planning to drive high-power aftermarket amplifiers should consider higher-end component speakers instead.
- Three-way coaxial design provides clearer treble and midrange than basic two-way door speakers
- Straightforward 6.5-inch form factor fits common door locations with adapter rings
- Relatively high sensitivity performs well with a factory head unit without extra amplification
- Lightweight, easy-to-handle speakers simplify DIY installation
- Poly piezo tweeter and budget materials limit high-end detail and soundstage refinement
- Not optimized for strong low-bass response compared with dedicated woofers
Verdict A budget-friendly direct door upgrade for Kia Soul owners who want noticeably clearer mids and highs without adding an amplifier, but not a substitute for a premium component system.
7. Kenwood KFC-1666S 6.5" 2-Way Car Door Coaxial Speaker (pair)
| Speaker Size | 6.5 Inches |
|---|---|
| Speaker Type | Coaxial 2-way |
| Impedance | 4 Ohms |
| Frequency Response | 40 – 22000 Hz |
| Sensitivity | 90dB |
These Kenwood 6.5" KFC Series two-way coaxial speakers are a straightforward door upgrade that brings clearer vocals and brighter highs compared with many factory speakers. They pair a polypropylene woofer with a 1" balanced dome tweeter and a ferrite motor structure, so they reproduce mid and high frequencies with good clarity and handle modest power without distortion. Typical use is replacing stock front or rear door speakers in a Kia Soul to improve overall clarity and midrange presence while keeping installation simple thanks to the shallow top-mount depth. Practical benefits include a 4 ohm impedance that works with most factory head units and a sensitivity around 90dB for acceptable loudness without an amplifier. Important limitations are limited bass extension compared with larger woofers or powered systems and a discontinued model status that may make finding matching pairs or accessories harder. Fitment may require adapter plates or trimming for exact hole alignment in some door panels.
Best for: Balanced buyers seeking a straightforward, no-nonsense speaker upgrade for daily driving in a Kia Soul who prioritize clearer vocals and treble detail over heavy bass.
Less Ideal for: Audiophiles chasing deep, punchy bass or owners who want a full bass upgrade without adding a powered subwoofer should look at component systems or larger woofer options instead.
- Balanced two-way design with dome tweeter for clear highs and vocals
- Shallow top-mount depth suited to tight door cavities
- 90dB sensitivity and 4 ohm impedance work well with factory head units
- Polypropylene cone and treated cloth surround resist common door moisture and wear
- Not designed to deliver deep bass without a subwoofer or amplifier
- Discontinued model which could limit availability of replacement units or accessories
Verdict A practical, easy-to-install 6.5" two-way speaker that noticeably improves clarity in Kia Soul doors but will need a subwoofer for strong bass.
Choosing the Right Kia Soul Door Speakers: Key Factors to Consider
Fitment and Mounting Depth
Fitment determines whether a speaker will physically install in the Kia Soul door without major modification. Measure mounting diameter, mounting bolt pattern, and depth to ensure the speaker clears the window mechanism and door skin. If a speaker is too deep it may contact internal components or require trimming, while a too-large diameter often needs adapter brackets.
Consider the speaker’s mounting flange profile and whether adapter rings are commonly available. Speakers designed with shallow-mount profiles reduce the need for cutting or relocation of factory wiring and make installation cleaner and faster. Always verify screw locations and grille clearance to avoid rattles and fitment surprises.
Power Handling and RMS Rating
Power handling, expressed as RMS and peak wattage, indicates how much continuous power a speaker can accept. Matching RMS to your head unit or amplifier output helps prevent distortion and overheating. A speaker with too low RMS will underperform or be damaged when paired with a stronger amp, while an extremely high-rated speaker may be inefficient with a weak factory stereo.
Consider conservative RMS figures and realistic speaker sensitivity to balance loudness and reliability. If you plan an amplifier upgrade, choose speakers with headroom to handle higher outputs without breakup. Look for honest RMS numbers rather than marketing peak claims.
Speaker Type: Coaxial Vs Component
Coaxial speakers have the tweeter mounted over the woofer and are a compact, cost-effective solution for door upgrades. They simplify installation because a single speaker fits in the factory location and delivers both highs and lows. Coaxial models are ideal when you want a straightforward swap with minimal extra components.
Component sets separate tweeters and woofers, allowing better placement of high-frequency drivers and improved imaging. While components can offer superior clarity and staging, they often require mounting the tweeters in sail panels or A-pillars and may need crossovers and additional wiring. Choose component door speakers only if you are prepared for the extra installation steps and placement considerations.
Sensitivity and Loudness
Sensitivity, measured in dB at 1 watt/1 meter, predicts how loud a speaker will play with a given power input. Higher sensitivity speakers will sound louder from the same amplifier power, which is useful when retaining a stock head unit. Lower sensitivity models may require more amplifier power to reach similar volumes and can strain a weak source.
Consider typical listening levels and whether you plan to run an external amplifier. Sensitivity interacts with power handling and frequency response; a well-balanced speaker with moderate sensitivity often provides the best real-world performance without demanding significant power.
Frequency Response and Sound Balance
Frequency response indicates the range of audio a speaker can reproduce and gives clues about tonal balance. For door speakers, expect limited low-bass capability due to small enclosure volume; prioritize a flat midrange and clear highs for vocals and instruments. A wide, even frequency response helps ensure natural sound and good detail.
If stronger bass is important, plan for a subwoofer or bass-focused upgrades since door-mounted speakers seldom provide deep bass on their own. Also consider whether the speaker’s midrange is forward or relaxed, as this affects perceived vocal clarity in the car cabin.
Durability and Materials
Doors expose speakers to moisture, temperature swings, and vibration, so materials matter. Look for cones made from treated paper, polypropylene, or composite materials that resist warping. Tweeter domes should be durable and able to handle humidity without degrading.
Check that surround materials and suspension parts are robust for repeated use. Corrosion-resistant mounting hardware and quality wiring terminals improve long-term reliability. Durable construction reduces the chance of failures that lead to rattles or distortion over time.
FAQ
Will replacing door speakers improve bass in my Kia Soul?
Replacing door speakers can improve midbass and clarity but rarely adds deep, subsonic bass because door cavities are small. For noticeably stronger low-frequency output you will usually need a dedicated subwoofer or bass enclosure alongside upgraded door speakers.
Can I install new door speakers without modifying the doors?
Often you can install new speakers if you choose models with compatible mounting diameters and shallow depths. Some aftermarket speakers are designed for factory openings and bolt patterns. If a speaker is too deep or has a different flange, you may need adapter rings or minor trim, but full door modification is not always required.
Should I choose coaxial or component door speakers for the Kia Soul?
Coaxial speakers are a practical choice when you want a straightforward swap because they combine tweeter and woofer in one unit. Component sets can offer better imaging and clarity, but they typically require additional mounting for the tweeters and possibly crossovers, which increases installation complexity. Your choice depends on your priority for sound staging versus installation simplicity.
How important is speaker sensitivity when using a factory head unit?
Sensitivity is quite important with a stock head unit because it affects loudness for a given power level. Speakers with higher sensitivity will generally sound louder and more dynamic without extra amplification. If you plan to keep the factory radio, prioritize moderate-to-high sensitivity to achieve satisfying volume and presence.
Do I need to replace wiring when upgrading door speakers?
Replacing wiring is not always necessary, but it can be beneficial. Upgrading to heavier-gauge speaker wire reduces voltage drop and preserves signal quality, especially if you plan to add an amplifier later. Inspect existing clips and connectors for corrosion and replace or adapt as needed for secure, low-resistance connections.
How We Chose the Best Kia Soul Door Speakers
Our selection process focused on the technical and practical factors that matter for door speaker swaps in the Kia Soul. We prioritized speakers with documented fitment dimensions and mounting configurations that match typical Kia Soul door openings, and we looked for models offering reliable power handling that pairs well with factory or upgraded amplifiers. Sound balance was assessed by considering nominal sensitivity and frequency range to ensure usable midrange and bass from a door location. Build quality and materials were considered to predict longevity in a car environment exposed to temperature changes and vibration. Ease of installation was another filter, favoring speakers with common mounting patterns and reasonable depth to avoid extensive door panel modification. We excluded products lacking clear fitment specs or that require custom fabrication beyond simple adapter rings. We also excluded speakers intended only for marine or non-automotive use. Final selections balanced compatibility, expected sound performance, and installation practicality to provide realistic upgrade paths for typical Kia Soul owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right Kia Soul door speakers comes down to matching fitment, power handling, and desired sound character to your installation skill level. Prioritize accurate fitment and reasonable RMS ratings to avoid installation headaches and ensure reliable daily performance. Decide whether you want a simple coaxial swap for ease, or a component set for better imaging and clarity, and plan for a subwoofer if deep bass matters. Balance sensitivity, frequency response, and build quality to find the best long-term fit for your listening goals.
Explore More:
- Check out all Kia Soul parts & accessories
- Explore Electronics
- Browse all Accessories
