Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Honda Fit is showing increased vibration or clunks during acceleration, replacing the engine mount can make a noticeable difference in ride comfort and drivetrain stability. Choosing the right mount matters because fit, material, and noise isolation all affect how the car feels and how long the mount lasts. This guide covers seven shortlisted engine mounts chosen for reliability and performance in common driving conditions. We evaluated each option for durability, vibration control, and ease of installation to help you find the best fit for your needs.
Looking for other parts? See all Honda Fit parts & accessories.
Top Picks at a Glance
1. Torchbeam Engine and Transmission Mount Kit for 2007–2008 Honda Fit (3-piece)
| Vehicle fitment | 2007–2008 Honda Fit |
|---|---|
| Included pieces | Front right motor mount, rear motor mount, transmission mount |
| OEM numbers referenced | AM500, A4537, EM9437 |
This Torchbeam kit provides the three primary mounts most commonly replaced on a 2007–2008 Honda Fit: the front right motor mount, rear motor mount, and transmission mount. It is built to mirror the factory design and uses metal components intended to improve durability and extend service life. The modular design and rubber sections are intended to absorb engine vibrations and reduce cabin noise, so you should notice smoother idling and less NVH after installation. Installation is typical for direct-replacement mounts and is suitable for DIY mechanics with basic tools or a professional shop. The kit is practical for restoring worn mounts and improving long-term stability, but it is a basic replacement rather than a performance upgrade; it will not eliminate vibration from other drivetrain issues. Fitment is limited to the specified model years and requires matching OEM part numbers for correct placement. If you need a torque-assisted or reinforced performance mount, look elsewhere, but for a reliability-focused restoration this kit covers the main mounting points affordably and with factory-style function.
Best for: Reliability-focused buyers who prioritize restoring factory-like smoothness and reducing cabin vibration on a 2007–2008 Honda Fit without chasing performance upgrades.
Less Ideal for: Drivers seeking hardened performance mounts for aggressive driving or installations on different vehicle years and models should consider alternative reinforced options.
- Three-piece kit replaces front right motor, rear motor, and transmission mounts for one-stop repair
- Designed to match original part layout for straightforward direct replacement fitment
- Modular design and rubber damping help reduce engine vibration and cabin noise
- Constructed from metal components intended to improve durability and service life
- Not a performance or reinforced mount option for high-torque applications
- Fitment limited to 2007–2008 Honda Fit and requires correct OEM part matching
Verdict A practical, factory-style three-piece mount kit aimed at reliability-focused Honda Fit owners who want to restore smoothness and reduce vibration.
2. PATEWIN Engine Mount Compatible with 2007–2008 Honda Fit 1.5L Automatic Transmission
| Compatibility | 2007-2008 Honda Fit 1.5L Automatic Transmission |
|---|---|
| Manufacturer | PATEWIN |
| Interchange Part No | AM500, A4552, A4537 |
| Construction | Rubber bonded to high-strength steel |
This PATEWIN engine mount is a direct-fit replacement intended for the 2007–2008 Honda Fit 1.5L with an automatic transmission. It replaces worn motor/transmission supports to reduce engine movement, vibration, and clunking during acceleration or gear changes. The part is built with rubber bonded to high-strength steel and claims factory-quality fit and finish for straightforward installation with factory mounting points. Buyers will appreciate that it targets a common cause of cabin vibration and can be installed as a single repair without modifying other components. Practical benefits include quieter operation, improved feel under throttle, and a plug-and-play fit for the specified Fit models. Limitations include mixed reports on long-term durability and occasional manufacturing defects like damaged threads or brittle plastic elements reported by some users, so inspect hardware before installation. A one-year warranty is offered by the seller, but users seeking OEM longevity may prefer factory replacements or higher-end aftermarket options.
Best for: Convenience-driven buyers who want a ready-to-install, vehicle-specific replacement that quickly restores ride comfort without sourcing OEM parts or extensive troubleshooting.
Less Ideal for: Drivers prioritizing long-term OEM-level durability or those who prefer validated heavy-duty aftermarket mounts for high-performance or high-mileage applications should consider alternatives.
- Direct-fit design for 2007–2008 Honda Fit 1.5L automatic for straightforward installation
- Rubber bonded to steel construction aims to reduce vibration and engine movement
- Advertised to meet or exceed factory specifications for fit and finish
- Includes a one-year warranty for replacement if the part fails
- Some users reported manufacturing defects such as damaged threads and plastic failures
- Mixed durability reports compared with OEM mounts
Verdict A convenient, direct-fit replacement that restores comfort for 2007–2008 Honda Fit owners but inspect parts on arrival due to mixed durability reports.
3. PAROD 5‑Piece Engine Mount Kit for Honda Accord 2.4L (2013–2017)
| Vehicle fitment | 2013–2017 Honda Accord 2.4L L4, Automatic CVT Trans |
|---|---|
| Kit contents | Front, front-right, rear engine mounts; left lower and left upper transmission mounts |
| Manufacturer | PAROD |
This PAROD kit supplies the full set of engine and transmission mounts needed when replacing worn mounts on a 2013–2017 Honda Accord 2.4L with a CVT. It includes the front, front-right, rear, left lower transmission, and left upper transmission mounts, which makes it a convenient single-purchase solution for restoring engine support and reducing vibration transfer to the chassis. The listing states the mounts are made to factory-quality standards and vehicle-tested, so expect fitment that aligns with factory geometry and typical OEM-like performance in isolating engine movement. Practical benefits include replacing multiple aged mounts at once to resolve vibration, improve shifting stability, and protect drivetrain components. Limitations are that durability and noise isolation will still depend on installation quality and driving habits, and aftermarket parts can vary from factory parts in long-term wear characteristics despite similar initial fit and function.
Best for: Performance-oriented buyers who prioritize restoring tight engine control and minimizing driveline movement on a Honda Accord 2.4L CVT to preserve handling and shifting feel.
Less Ideal for: Shoppers seeking guaranteed factory-part longevity or extended proven lifetime data who prefer OEM replacement programs should consider factory-sourced options instead.
- Complete kit replaces all primary engine and transmission mounts in one purchase for the Accord 2.4L CVT.
- Advertised to match factory-quality fit and geometry for straightforward installation and alignment.
- Vehicle-tested claim suggests attention to fitment and initial durability across the listed model years.
- Long-term durability and NVH performance versus genuine factory parts is not independently verified.
- Kit covers only the specified Accord 2.4L CVT fitment and is not applicable outside those model years and drivetrain configurations.
Verdict A convenient, factory-quality replacement kit for restoring engine support and reducing vibration on 2013–2017 Honda Accord 2.4L CVT models, with typical aftermarket durability caveats.
4. RP Remarkable Power Front Upper Engine Torque Strut Mount A4543 for 2006–2011 Honda Civic 1.8L
| Fitment | 2006-2011 Honda Civic 1.8L |
|---|---|
| Package | 1pc A4543 Upper Front Right Mount |
| Material | High Quality Rubber |
| Manufacturer Part Number | A4543_GROUP1|RP |
This RP Remarkable Power front upper torque strut mount replaces the factory unit that helps keep the engine and transmission stable in the engine bay. Designed as a direct replacement, it installs in the upper front right position and is intended to reduce engine movement that causes vibration and drivetrain lash. The part is made with molded rubber and is offered as a single-piece package, so most buyers will use it during a like-for-like repair or when an old mount shows cracking or excessive play. Customers report straightforward installation and a snug fit on compatible Civics, and the mount restores comfort by reducing vibration and harshness transmitted to the chassis. Limitations are its single-piece sale rather than a multi-mount kit and that long-term durability may be lower than higher-end factory-quality mounts, so plan for inspection after heavy use. Professional installation is recommended if you lack experience shifting engine support safely.
Best for: Budget-conscious buyers who need an affordable, direct-replacement mount to restore comfort and reduce engine vibration on an older Honda Civic 1.8L and prefer a pragmatic repair over an expensive full-set replacement.
Less Ideal for: Drivers looking to replace multiple engine mounts at once or those who prioritize longest-term durability and factory-quality materials should consider higher-end complete kits or OEM parts.
- Made to directly replace the upper front right torque strut on compatible Civics for a straightforward swap
- Molded rubber construction that helps damp engine vibration and improve cabin comfort
- Compact, single-piece unit that is easy to handle and position during installation
- Sold as a single mount rather than a multi-piece engine/transmission mount kit
- Not guaranteed to match the longevity of premium or factory-quality mounts under heavy use
Verdict A cost-conscious direct-replacement upper front torque strut that restores stability and reduces vibration for compatible 2006–2011 Honda Civic 1.8L models, best when you need an affordable single-part fix.
5. YEOPGYEON Engine Motor Mount Set for Honda Fit 2007–2008 (Set of 3)
| Compatible vehicle | Honda Fit 2007-2008 L4 1.5L Auto Transmission |
|---|---|
| Included parts | AM500 (front right), A4537 (transmission), A4552 (rear) |
| Material | Rubber & Steel |
| Treatment | Heat Treated |
This engine motor mount set replaces the front right, transmission, and rear mounts on a Honda Fit 2007–2008 with the 1.5L automatic. Made from heat-treated steel and rubber, the kit is intended to damp engine movement, lower vibration and noise, and restore the factory mounting geometry for smoother driving. Installation is straightforward for a competent DIYer or a shop using basic tools since the parts are described as direct-fit with no modification required. The set lists multiple interchange numbers so it can match factory locations, and the rubber durometer is tuned for vehicle application to control NVH. Expect improved comfort and reduced engine movement under acceleration, though longevity will depend on driving conditions and installation quality. One limitation is fitment is limited to the specified Fit model years and transmission; also some buyers reported receiving incorrect pieces so checking each part against your old mounts before install is advisable.
Best for: Risk-averse mainstream buyers who prioritize restoring factory-like ride comfort and minimizing vibration after worn mounts, and who prefer a complete kit to replace all major mounts at once.
Less Ideal for: Enthusiasts seeking performance-oriented stiffer mounts or owners of Fits outside the specified years and transmission types should look elsewhere.
- Direct-fit replacement for Honda Fit 2007–2008 automatic 1.5L applications.
- Set includes front right, transmission, and rear mounts so all major engine support points are addressed.
- Heat-treated steel and rubber construction aimed at durable vibration damping.
- Multiple interchange part numbers increase the chance of correct fitment.
- Compatibility limited strictly to 2007–2008 Honda Fit 1.5L automatic; not suitable for other years or transmissions.
- Some buyers reported receiving incorrect-sized pieces, so part verification is necessary before installation.
Verdict A practical, complete replacement mount kit for 2007–2008 Honda Fit automatics that restores factory-style stability but requires careful part verification on arrival.
6. zaygyize 3-Piece Engine and Transmission Mount Kit for 2007-2008 Honda Fit 1.5L Automatic
| Compatible Models | 2007-2008 Honda Fit 1.5L Automatic |
|---|---|
| Included Parts | Front right motor mount, rear motor mount, transmission mount |
| Manufacturer | zaygyize |
| Item model number | QF1K0133 |
This three-piece kit supplies the front right motor mount, rear motor mount, and transmission mount needed to replace worn mounts on a 2007–2008 Honda Fit 1.5L automatic. Installation is the typical bolt-on swap for engine and transmission mounts and is commonly done during routine engine work or when vibration and noise increase. The listing includes multiple part numbers that match common factory replacements, which helps confirm fitment before buying. In use the components aim to stabilize the engine, reduce driveline vibration, and quiet cabin noise compared with degraded mounts. The kit is positioned as a durable, budget-focused option and appears to offer straightforward fit without modification. Limitations are that you must verify the part numbers against your vehicle and expect aftermarket materials and finish that may not match higher-end factory-quality replacements; long-term durability can vary with driving conditions. For someone replacing all mounts at once, this kit is a convenient, cost-conscious solution that restores support and reduces engine movement.
Best for: Practical optimizers who want a complete, affordable replacement kit to restore ride comfort and reduce vibration without overspending on premium parts.
Less Ideal for: Buyers seeking a factory-quality or performance-grade mount for high-mileage, heavy-duty use should consider higher-end alternatives tailored to longevity or track use.
- Includes the three commonly replaced mounts (front right, rear, and transmission) for a single purchase
- Lists multiple matching part numbers to help confirm vehicle fitment
- Designed to reduce engine vibration and cabin noise compared with worn mounts
- Economical kit that lets you replace all key mounts at once rather than buying individually
- Aftermarket construction may not match long-term durability of higher-end factory-quality mounts
- Fitment still requires checking part numbers or VIN confirmation before purchase
Verdict A cost-effective, three-piece mount kit that restores engine stability and reduces vibration for 2007–2008 Honda Fit 1.5L automatics if you confirm part-number fitment.
7. A-Premium Engine and Transmission Mount Kit (4 pieces) for Honda Civic 2006–2011 1.8L Manual
| Vehicle fitment | Honda Civic 2006–2011 L4 1.8L manual petrol |
|---|---|
| Set contents | Front motor, transmission, front upper torque strut, front lower torque strut |
| Manufacturer part number | APEM023 |
| Reference part numbers | 50890SNAA02, 50880SNAA02, 50820SNAP01, 50850SNAA82 |
This four-piece kit replaces the front motor mount, transmission mount, and upper and lower torque strut mounts that secure the engine and gearbox. It is intended to restore factory-style engine positioning, reduce vibration and drivetrain movement, and improve smoothness during gear changes. Installation is a standard DIY or shop job; buyers report the pieces fit without major modification though alignment and some maneuvering are required around the transmission. The listing emphasizes materials tested to meet or exceed factory-quality specifications and the set includes parts referenced to multiple Honda part numbers for straightforward swapping. Practical benefits include noticeably reduced vibration and improved shifting feel when worn mounts are swapped out. Limitations: the kit is listed for Civic 2006–2011 L4 1.8L manual petrol applications only, so it is not appropriate for other engines or automatics, and one review notes the engine damper in some sets failed early while other mounts held up, so occasional quality variance is possible.
Best for: Balanced buyers looking for a comprehensive, factory-replacement style mount kit to restore ride comfort and drivetrain control on a 2006–2011 Honda Civic 1.8L manual who value a full refresh over piecemeal repairs.
Less Ideal for: Drivers who need mounts for other engine types or automatic transmissions, or those who prefer heavy-duty performance mounts for aggressive driving should consider alternatives.
- Complete four-piece kit covers motor, transmission and both torque mounts for a full replacement.
- Formatted to match factory part references for straightforward fitment to the listed Civic application.
- Reported to noticeably reduce vibration and improve shift smoothness when original mounts are worn.
- Materials and testing are described as meeting or exceeding factory-quality standards.
- Fitment is specific to 2006–2011 1.8L manual petrol Civics and will not suit other engines or automatic transmissions.
- Some customers reported early failure of the engine damper in a minority of sets, indicating possible quality variability.
Verdict A convenient factory-style four-piece mount kit that reliably restores NVH and shift feel for the specified Honda Civic manual 1.8L, with occasional variability in one damper part.
Choosing the Right Honda Fit Engine Mount: Key Factors to Consider
Material and Construction
The materials used in an engine mount determine how well it absorbs vibration and withstands wear. Mounts commonly use bonded rubber, hydraulic fluid chambers, or polyurethane; each has tradeoffs in comfort, durability, and noise transfer. Better bonding between rubber and metal reduces the risk of delamination, which can lead to premature failure.
Metal components should resist corrosion and maintain structural integrity under engine torque. Pay attention to the quality of welds, bushings, and fasteners because those details influence long-term reliability and service life.
Vibration Damping Performance
How a mount manages engine vibration affects cabin comfort and perceived refinement. A mount with effective damping reduces harshness from idling, acceleration, and gear changes, improving driver comfort and reducing fatigue on nearby components.
Consider how the mount performs across different RPM ranges and driving conditions. Some designs damp low-frequency shaking better, while others focus on high-frequency noise. Choose a mount that matches the typical use case for your vehicle, such as daily commuting or spirited driving.
Fitment and Compatibility
Accurate fitment is essential to ensure the mount aligns with engine and chassis mounting points. A correct fit minimizes installation time and prevents undue stress on bolts, brackets, and the drivetrain. Even small deviations in hole placement or thickness can affect torque transfer and introduce unwanted movement.
Verify that the mount matches the Honda Fit’s model year and engine configuration. Hardware completeness and clear fitment instructions reduce the chance of errors during replacement and help achieve the intended performance.
Durability and Environmental Resistance
Engine mounts face heat, oil, road grime, and mechanical load cycles, so resistance to environmental factors is important. Materials that degrade quickly when exposed to oil or extreme temperatures will shorten service life and lead to repeat replacements.
Look for mounts made from compounds or coatings designed to resist heat cracking, ozone, and chemical exposure. Durable mounts save time and labor over the long run and maintain consistent performance in varied climates.
Noise and Harshness Tradeoffs
Some mounts prioritize isolation and comfort, while others emphasize stiffness for better engine control. Softer mounts reduce noise and harshness but may allow more engine movement, whereas stiffer mounts improve response but can transmit more vibration into the cabin.
Consider the typical driving environment and your tolerance for noise. If cabin quiet is a priority, choose a mount designed for superior damping. If you prioritize drivetrain precision, a firmer mount may be preferable despite slightly higher noise transfer.
Installation and Serviceability
Ease of installation affects total downtime and the likelihood of correct replacement. Mounts that include necessary bolts, bushings, and clear instructions reduce the chance of missing pieces or improper torque. Accessibility of mounting points on the Honda Fit also factors into how complex the job will be.
If you plan to have a technician perform the work, confirm that the mount’s design does not require specialized tools. Consider whether future maintenance or removal will be straightforward to minimize labor costs and effort.
FAQ
What are common symptoms of a failing engine mount on a Honda Fit?
Common signs include increased vibration at idle, clunking or banging during acceleration or shifting, and engine movement noticeable when revving. You may also detect unusual noise or a change in engine position under load. These symptoms often vary with driving conditions and the mount’s degree of wear.
Can I perform an engine mount replacement myself?
Replacing an engine mount is often doable for someone with basic mechanical skills and the right tools, but it depends on access to mounting points and required torque procedures. Some mounts need the engine supported safely during removal. If you are unsure about safe jacking or torque specifications, professional installation is a safer choice.
How long do engine mounts typically last on a Honda Fit?
Lifespan varies with driving style, environment, and mount materials. Many mounts last several years under normal driving, but exposure to oil, harsh climates, or heavy loads can shorten life. Regular inspection for cracking, excessive movement, or fluid leaks helps catch issues before failure.
Will a stiffer mount reduce engine movement but increase vibration?
Yes, firmer mounts generally limit engine movement and can improve throttle response and perceived control. However, they often transmit more vibration and noise into the cabin. Choosing a mount involves balancing the need for control with acceptable levels of comfort.
How can I tell if vibration is caused by the engine mount or another issue?
Start by noting when the vibration occurs. If it is most pronounced at idle or during acceleration and corresponds with visible engine movement, the mount is a likely cause. Other sources include drivetrain components, wheel balance, or suspension issues. A visual inspection and targeted tests, such as supporting the engine to see if vibration changes, can help narrow the cause.
Are there maintenance steps to extend engine mount life?
Regular visual checks for cracks, oil contamination, or excess movement help catch wear early. Avoiding prolonged high-revving and minimizing exposure to oil leaks or contaminants can also extend life. Addressing adjacent component leaks and ensuring correct installation torque reduces undue stress on the mount.
How We Chose the Best Honda Fit Engine Mount
To assemble this list we focused on attributes that matter for Honda Fit engine mounts in real-world use. Primary criteria included material quality and construction, since rubber density and metal reinforcement determine longevity and vibration isolation. We also weighed durability under typical city and highway loads, looking at fatigue resistance and resistance to oil or heat degradation. Mount geometry and fitment accuracy were evaluated because correct alignment reduces stress on adjacent components. Noise isolation and vibration damping were assessed to prioritize quieter, smoother operation. Ease of installation and hardware completeness were considered to reflect what drivers can expect during replacement. We excluded items lacking clear fitment data for the Honda Fit or those with insufficient user feedback on longevity. The final selection balances proven materials, reliable vibration control, and practical installation considerations.
Our full evaluation process is outlined in our review methodology.
Conclusion
Selecting the right Honda Fit engine mount requires balancing durability, vibration control, and installation practicality. Prioritize mounts with suitable materials and proven damping characteristics for your driving style, and confirm precise fitment to avoid added stress on the drivetrain. Remember that stiffer designs trade comfort for control, while softer mounts favor quietness and isolation. Use the factors above to weigh the tradeoffs and choose the option that best matches how you use your Honda Fit.
Explore More:
- Check out all Honda Fit parts & accessories
- Explore Engine
- Browse all Auto Parts
