Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you own a Honda Fit, a failing valve cover gasket can mean oily deposits, burning smells, and potential engine performance issues. Choosing the right Honda Fit valve cover gasket helps prevent leaks, protects nearby components, and reduces the need for repeat work. This guide covers the top shortlisted gaskets selected for fit and sealing performance, and it explains the evaluation criteria we used, including material type and sealing reliability. Read on for practical guidance that prepares you to pick the right gasket for routine maintenance or repairs.
Looking for other parts? See all Honda Fit parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | DNJ Valve Cover Gasket for 2015-2020 Honda Fit 1.5L L4 (L15B1) |  |
| Best Quality Built to a higher standard if you want something more solid | Honda Genuine 2-Pack Valve Cover Gasket (12391-ZE2-020) |  |
| Best Value The sweet spot between price and what you get | X AUTOHAUX Valve Cover Gasket for Honda Fit / CRZ (12341-RB0-003) |  |
| Best Budget The cheapest option that still gets the job done reliably | INFINAUTO Valve Cover Gasket 12341-RB0-003 for Honda Fit/CR-Z (2009–2014) |  |
| Highest Rated A top-rated pick with lots of positive feedback | X AUTOHAUX Valve Cover Gasket Replacement 12341-PWC-000 for Honda Fit 2007-2008 |  |
| Most popular A crowd favorite that many people choose with confidence | Beck/Arnley Valve Cover Gasket Set |  |
| Best Seller A high-volume bestseller chosen again and again | A-Premium Valve Cover Gasket Compatible with Honda Fit 2009-2014 and CR-Z 2011-2016 1.5L |  |
1. DNJ Valve Cover Gasket for 2015-2020 Honda Fit 1.5L L4 (L15B1)
| Fitment | 2015-2020 Honda Fit 1.5L L4 L15B1 |
|---|---|
| Manufacturer | DNJ ENGINE COMPONENTS |
| Model | Valve Cover Gasket VC248 |
| Warranty | 12-month or 12,000-mile limited |
This DNJ valve cover gasket is a direct replacement designed to restore a proper seal on 2015–2020 Honda Fit 1.5L L4 (L15B1) engines. Typically used during valve cover removal for maintenance or when diagnosing oil leaks, the gasket matches the factory profile so it seats cleanly in the valve cover channel and helps stop seepage around the top of the engine. The part comes new with a limited 12-month or 12,000-mile warranty and is sold under DNJ Engine Components, a brand known for aftermarket engine parts. Its practical benefit is straightforward: a correct-fit gasket reduces the need for additional sealants and simplifies reassembly after routine work like spark plug or ignition coil service. Trade-offs to consider are typical of aftermarket gaskets — long-term durability can vary with installation cleanliness and torque procedure, and buyers should follow Honda torque specs and use a clean mating surface to avoid future leaks.
Best for: Balanced owners who prioritize a reliable, factory-style replacement when servicing a 2015–2020 Honda Fit and want a straightforward part that simplifies routine engine maintenance.
Less Ideal for: Do not choose this if you need a performance or upgraded sealing solution for extreme-duty use or if you require a multi-vehicle universal gasket.
- Engine-specific fit for 2015–2020 Honda Fit 1.5L L4 (L15B1) for straightforward replacement
- New part from a specialist engine parts brand with a limited warranty
- Ships ready to install which reduces need for additional sealants when installed correctly
- Helps eliminate valve cover area oil leaks and simplifies engine maintenance access
- Long-term lifespan depends on proper installation and cleaning of mating surfaces
- Limited warranty covers replacement only and is time/mileage capped
Verdict: A practical, engine-specific replacement gasket that restores a factory-style seal on 2015–2020 Honda Fit 1.5L engines to stop oil leaks and simplify maintenance.
2. Honda Genuine 2-Pack Valve Cover Gasket (12391-ZE2-020)
| Brand Name | Honda |
|---|---|
| Part Number | 12391-ZE2-020 |
| Material Type | Oem |
This is a genuine Honda valve cover gasket sold in a two-pack for direct replacement on compatible Honda engines. It is intended for use when a leaking valve cover needs a factory-quality seal; installers simply remove the valve cover, replace the aged gasket, and refit the cover to stop oil seepage. Being an OEM part, the gaskets arrive in Honda packaging and match factory contours and bolt patterns so fitment is precise when the correct part number is used. The practical benefit is reliable sealing that reduces repeat leaks and the need for extra sealant or trimming. The main limitation is strict fitment: this part fits specific Honda configurations and will not suit engines with different valve cover styles, so verifying model and engine serial details before purchase is required. Replacement buyers who prioritize a factory match and long-term leak prevention will find this preferable to generic aftermarket alternatives.
Best for: Performance-oriented buyers who demand factory-spec replacement parts to restore or maintain engine sealing and reliability during spirited driving or regular high-load use.
Less Ideal for: Budget-focused DIYers looking for a universal or low-cost aftermarket gasket option or shoppers who need multi-vehicle compatibility.
- Genuine Honda OEM part for factory-accurate fit and sealing
- Sold as a two-pack so you have a spare or can service two covers
- Simple direct replacement that eliminates common valve cover oil leaks
- Only fits specific Honda valve cover configurations so fitment must be confirmed
Verdict: Choose this genuine Honda 2-pack valve cover gasket when you want a factory-fit replacement that reliably stops valve cover oil leaks.
3. X AUTOHAUX Valve Cover Gasket for Honda Fit / CRZ (12341-RB0-003)
| Fitment | Honda CRZ 2009-2014, Honda Fit 2009-2014 |
|---|---|
| OE Number | 12341-RB0-003 |
| Material | Rubber |
| Condition | New |
This X AUTOHAUX valve cover gasket is a direct-replacement rubber seal intended to stop oil leaks from the valve cover on 2009–2014 Honda Fit and CRZ models. It installs in the same location as the factory gasket and is used when oil seepage or burning-oil smells indicate a failing seal. Made from heat- and oil-resistant rubber, the gasket aims to restore a tight seal and prevent oil from contaminating the valve train. The product is sold as one piece with the listed OEM number to help confirm fitment and the manufacturer says it is a non-OEM aftermarket part. Practical benefits include simple, bolt-on installation and a material choice that resists aging and oil exposure for routine driving conditions. Limitations are that this is a single gasket piece rather than a full gasket set and it is an aftermarket part so fit and long-term durability may vary compared with factory-quality replacements.
Best for: Practical optimizers looking to fix a leaking valve cover on a Honda Fit or CRZ without paying for a full dealer repair; ideal for DIYers prioritizing immediate, cost-effective repairs.
Less Ideal for: Buyers seeking a full gasket overhaul with all ancillary seals included or those who prefer only factory-brand replacement parts should consider alternatives.
- Direct-fit design for 2009–2014 Honda Fit and CRZ with OEM reference number for verification
- Rubber construction formulated for heat and oil resistance to address common valve cover leaks
- Simple direct-replacement installation suitable for DIY repairs
- Single-piece supply useful when only the valve cover gasket needs replacement
- Aftermarket part so long-term fit and durability may not match factory-quality replacements
- Sold as one gasket only rather than a complete valve cover gasket kit with ancillary seals
Verdict: A straightforward, budget-minded rubber valve cover gasket that restores a leak-free seal on 2009–2014 Honda Fit and CRZ engines.
4. INFINAUTO Valve Cover Gasket 12341-RB0-003 for Honda Fit/CR-Z (2009–2014)
| Fitment | Honda Fit 2009-2014; Honda CR-Z 2009-2014 |
|---|---|
| OE Number | 12341-RB0-003 |
| Material | Rubber |
| Condition | New |
This INFINAUTO valve cover gasket is a budget-focused replacement designed to restore a leaking valve cover seal on Honda Fit and CR-Z models from 2009 to 2014. Made from molded rubber, it resists heat and oil and is sold as one gasket sized to match OE number 12341-RB0-003 for direct replacement. Typical use is straightforward: remove the old gasket, clean the valve cover mating surface, and install the new gasket in the valve cover groove to stop oil seepage and the associated oil smell or low-oil symptoms. The product emphasizes durability for everyday driving and claims compatibility with the listed Honda models. Limitations are that this is a non‑OEM aftermarket part so fitment can be sensitive to installation technique and slight dimension variances, and buyers should confirm the OE number before purchase. It ships as a single gasket only, so additional seals or hardware may be needed depending on the service.
Best for: Budget-conscious owners looking for an inexpensive, no-frills replacement to stop valve cover leaks on a Honda Fit or CR-Z and who prioritize affordability over brand-new factory parts.
Less Ideal for: Owners seeking a factory-brand gasket, precision-fit restoration, or a comprehensive gasket kit that includes additional seals and hardware should consider higher-end or OEM options.
- Direct replacement matching OE number 12341-RB0-003 for specified Honda models
- Molded rubber construction offers heat and oil resistance for typical engine conditions
- Simple single-piece design makes installation faster for routine valve cover service
- Aftermarket non‑OEM part so exact fit can vary and careful installation is required
Verdict: A low-cost, direct-fit rubber valve cover gasket that restores a leaking valve cover on 2009–2014 Honda Fit and CR-Z models.
5. X AUTOHAUX Valve Cover Gasket Replacement 12341-PWC-000 for Honda Fit 2007-2008
| Manufacturer | X AUTOHAUX |
|---|---|
| Material | Rubber |
| OE Number | 12341-PWC-000 |
| Fitment | Honda Fit 2007-2008 |
This X AUTOHAUX valve cover gasket is a direct-replacement rubber seal made to fit Honda Fit 2007-2008 with OE number 12341-PWC-000. It is used to stop oil from leaking out of the valve cover area and to keep oil from contaminating other engine components. The gasket is molded from heat- and oil-resistant rubber intended for long service life and is sold as a single piece for straightforward swap-in installation. In practice the part installs like a factory replacement and helps eliminate low-oil conditions and burning-oil smells that result from a failed seal. Because it is a non-OEM aftermarket part, fitment checks are recommended before installation, and careful seating is required to avoid over-compression which can reduce sealing performance. For routine maintenance or a targeted leak repair on the specified Honda Fit years, this gasket offers a cost-effective path to restore engine sealing without modifying the engine.
Best for: Reliability-focused owners who prioritize fixing oil leaks with an affordable, function-first replacement part and want a straightforward repair that restores normal engine sealing.
Less Ideal for: Buyers seeking an OEM-branded part, a multi-piece gasket kit, or those who prefer one-stop kits that include fasteners and sealants should consider other options.
- Made from rubber formulated for heat and oil resistance to withstand engine conditions
- Direct replacement fit for Honda Fit 2007-2008 using OE number 12341-PWC-000
- Simple one-piece design that makes installation straightforward for routine gasket replacement
- Helps stop oil leaks that cause low oil level and burning-oil odors
- Aftermarket non-OEM part so fit and finish can vary compared with factory parts
- Sold as a single gasket without additional seals or hardware that some repair jobs require
Verdict: A cost-effective rubber replacement gasket made to restore a reliable valve cover seal on Honda Fit 2007-2008 models.
6. Beck/Arnley Valve Cover Gasket Set
| Brand | Beck/Arnley |
|---|---|
| Model | Valve Cover Gasket Set |
| Material | Plastic |
| Manufacturer | Beck/Arnley |
This Beck/Arnley valve cover gasket set supplies all the gaskets and seals needed when replacing a leaking valve cover on a Honda Fit. Packaged so you can see each component, the kit is application specific and intended to install like a factory-quality replacement. In practice it is used during valve cover removal to replace the main cover gasket and spark plug tube seals, and reviewers report straightforward fitment and long-term leak-free service when installed carefully without stretching the rubber pieces. The manufacturer emphasizes matching factory form, fit, and function and the kit includes grommets and seals that save a trip to the parts store. Limitations are minimal but include the need to follow correct installation steps such as using RTV where required and handling the gasket gently to avoid deformation; the listing does not include vehicle-specific instructions, so referencing a Honda Fit service manual is still recommended. For routine valve cover gasket replacements on a Honda Fit, this set offers a convenient, dependable option.
Best for: Convenience-driven DIYers who want a ready-to-install, factory-quality gasket kit that minimizes additional trips for missing parts and simplifies a routine valve cover service on a Honda Fit.
Less Ideal for: Those who prefer a parts kit with step-by-step vehicle-specific instructions or technicians who need a manufacturer-backed service guide should consider alternatives with detailed install documentation.
- Complete kit includes valve cover gasket, spark plug tube seals, and grommets for a full installation
- Engineered to match factory form, fit, and function for a straightforward replacement
- Packaged in clear plastic so components are easy to identify before installation
- Reputable brand with multiple user reports of long-term, leak-free performance
- No vehicle-specific installation instructions included in the listing
- Requires careful handling and use of RTV in specified spots to ensure a proper seal
Verdict: A convenient, factory-quality valve cover gasket kit that simplifies replacing a leaking valve cover on a Honda Fit if you follow proper installation steps.
7. A-Premium Valve Cover Gasket Compatible with Honda Fit 2009-2014 and CR-Z 2011-2016 1.5L
| Vehicle fitment | Honda Fit 2009-2014, CR-Z 2011-2016 1.5L |
|---|---|
| Material | NBR/ACM Rubber |
| Operating temperature | -20°C – 150°C |
| Oil resistance | Resists high and low viscosity oil |
This valve cover gasket kit is a direct replacement designed to stop oil leaks at the valve cover on 1.5L Honda Fit and CR-Z engines. It is made from NBR/ACM rubber formulated for oil resistance and rated to operate between -20°C and 150°C, so it is suitable for normal road use and typical engine temperatures. The kit claims precise OEM-fit dimensions and lab testing to ensure a reliable seal against uneven surfaces, which makes installation straightforward for a mechanically competent DIYer or a technician. Practical benefits include improved oil containment, reduced residue around the cylinder head, and avoidance of secondary damage from leaking oil. Limitations are standard for aftermarket gaskets: long-term durability depends on correct installation and engine condition, and the kit does not include additional mechanical parts beyond the gasket, so replacement of other aging components may be needed when performing the repair.
Best for: Risk-averse mainstream buyers looking for a straightforward, factory-quality replacement to stop valve cover oil leaks on 1.5L Honda Fit and CR-Z engines and who prefer parts that match original fit and material standards.
Less Ideal for: People seeking a full overhaul kit with additional seals, bolts, or upgraded materials beyond a direct replacement gasket should consider more comprehensive repair kits.
- Made from oil-resistant NBR/ACM rubber for compatibility with engine oils
- Rated operating range from -20°C to 150°C for typical engine conditions
- Designed for precise OEM-fit dimensions to match original valve cover sealing surfaces
- Passed lab temperature endurance tests indicating manufacturing quality
- Contains only the gasket so additional seals or hardware may be required for a complete service
- Long-term performance depends on correct installation and the condition of mating surfaces
Verdict: A direct-fit, oil-resistant valve cover gasket built to restore a reliable factory-style seal on 1.5L Honda Fit and CR-Z engines.
Choosing the Right Honda Fit Valve Cover Gasket: Key Factors to Consider
Gasket Material and Construction
The material determines how well a valve cover gasket resists oil, heat, and aging. Rubber compounds, silicone, and multi-layer composites each behave differently under thermal cycling. Silicone gaskets often provide superior elasticity and return to shape after compressive loads, while certain rubber blends can offer good initial sealing at a lower cost.
Construction details such as reinforced sealing beads, integrated metal cores, or pressed edges affect how the gasket maintains contact pressure against the mating surfaces. A gasket that compresses evenly helps prevent localized leaks and reduces the likelihood of needing frequent retorquing.
Dimensional Accuracy and Fitment
A gasket must match the valve cover and cylinder head sealing surfaces precisely for an effective seal. Even small deviations in hole alignment or overall shape can lead to uneven compression and oil seepage. For the Honda Fit, confirm that bolt hole spacing, locator tab positions, and sealing profiles correspond with the vehicle's valve cover geometry.
Accurate fitment reduces installation frustration and minimizes the risk of damage during assembly. Look for products with explicit fitment information and clear guidance to ensure a correct match before starting work.
Compatibility With Engine Oils and Additives
Modern engines and some oil treatments can interact differently with gasket materials. Certain additive packages or higher detergent formulations may accelerate deterioration in weaker compounds. Choose a gasket material rated to withstand contact with common motor oils and conventional oil additives used in routine maintenance.
Durable compatibility helps the gasket retain flexibility and sealing force over time, which is especially important if you use extended drain intervals or performance-oriented oil formulations.
Resistance To Heat And Thermal Cycling
Valve cover gaskets are exposed to repeated temperature changes as the engine warms up and cools down. Materials that handle thermal expansion and contraction without cracking or hardening will last longer. Evaluate products that specify temperature ranges or testing for heat aging.
A gasket that resists thermal fatigue maintains a consistent seal and reduces the chance of developing leaks after months of driving.
Ease Of Installation And Serviceability
Some gaskets include features that make installation easier, such as molded alignment tabs, pre-applied sealant in critical areas, or clear instructions for torque sequences. Ease of installation reduces the risk of misalignment and decreases time spent on the job.
Consider whether the gasket requires additional sealant, how bolt torque should be approached, and whether any supporting hardware should be replaced at the same time to ensure a reliable service outcome.
Durability And Long-Term Reliability
Long-term performance is about the gasket maintaining its sealing force and elasticity over many miles. Indicators of durability include resistance to oil swelling, retention of compression set properties, and robust edge construction. A well-made gasket can prevent the need for repeated replacements and reduce the chance of oil contacting ignition components or wiring.
Assess product literature for longevity claims and manufacturing quality. Prioritize options that emphasize sustained sealing under typical driving conditions rather than short-term fit.
How We Chose the Best Honda Fit Valve Cover Gasket
We focused on the factors that most directly affect long-term sealing performance and installation reliability on the Honda Fit. Our selection criteria included gasket material and construction quality to resist oil and heat; dimensional accuracy and fitment to match factory sealing surfaces; resistance to oil degradation and thermal cycling; and ease of installation including compatibility with standard torque and fastener layouts. We also considered longevity indicators such as reinforced sealing beads and resistance to hardening or swelling. Items were excluded if they lacked clear material specifications, had inconsistent fitment information for the Honda Fit, or showed a pattern of early failure in user feedback. The final list highlights gaskets that balance durable materials, precise fit, and reliable seal characteristics for typical driving and maintenance scenarios.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common signs of a failing valve cover gasket on a Honda Fit?
Common indicators include visible oil seepage around the valve cover, oil accumulating on top of the engine or nearby components, and a noticeable burning oil smell when the engine is hot. You may also see smoke from oil dripping onto hot exhaust surfaces. These symptoms often start as small leaks and can become more pronounced over time.
Can I replace a valve cover gasket myself on a Honda Fit?
Many DIYers can replace a valve cover gasket with basic hand tools, patience, and the correct torque sequence knowledge. The task involves removing the valve cover, cleaning mating surfaces, and installing the new gasket without overtightening bolts. If you are uncomfortable with engine disassembly or torque specs, a professional can ensure proper installation.
Do I need to use sealant when installing a new valve cover gasket?
Whether to use additional sealant depends on the gasket type and the valve cover design. Some gaskets are designed to seal without extra adhesives, while others recommend a small amount of sealant at specific corners or oil rail interfaces. Follow the manufacturer guidance and avoid applying excess sealant that could squeeze into oil passages.
How long does a valve cover gasket typically last on a Honda Fit?
Lifespan varies with material, driving conditions, and maintenance practices. Many gaskets last several years and tens of thousands of miles under normal conditions, while exposure to high heat or oil contamination can shorten life. Regular inspections can catch early signs of wear before leaks escalate.
Will a leaking valve cover gasket affect engine performance?
A small leak from the valve cover gasket often does not directly reduce engine power, but it can cause secondary issues such as oil on ignition components, fouled sensors, or increased oil consumption. If left unaddressed, those problems can lead to misfires or malfunctions that impact performance.
How should valve cover bolts be tightened during installation?
Tighten bolts in the correct sequence and to the manufacturer recommended torque specs to ensure even compression. Start with a light, even pass to bring the cover down, then torque to specification in stages. Avoid overtightening, which can crush the gasket or deform the valve cover and lead to leaks.
Conclusion
When replacing a Honda Fit valve cover gasket, prioritize a product that offers durable material construction, accurate fitment, and heat resistance. Balance ease of installation with long-term sealing characteristics to reduce the chance of repeat work.Focus on proper installation technique, correct bolt torque, and clean mating surfaces. Those steps often matter as much as the gasket choice in achieving a lasting, leak-free seal.
Explore More:
- Check out all Honda Fit parts & accessories
- Explore Valve Cover Gaskets Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
