Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Choosing the right engine mount for your Dodge Challenger matters for ride comfort, drivetrain longevity, and overall vehicle control. A correctly selected mount reduces engine movement, cuts down on vibration and noise, and helps protect transmission and suspension components.This guide covers seven shortlisted Dodge Challenger engine mounts that made our list. We evaluated each option on durability, fitment precision, and how they address common symptoms like excess vibration and engine noise. Read on to see the factors we considered and which attributes to prioritize when replacing a mount.
Looking for other parts? See all Dodge Challenger parts & accessories.
Top Picks at a Glance
1. SHICHU Set of 3 Engine Motor Mounts for 2011–2022 Dodge Charger/Challenger/Chrysler 300
| Unit Count | 3.0 Count |
|---|---|
| Manufacturer | SHICHU |
| Model | CF5522 |
| Compatible Engines | 3.6L V6 and 5.7L V8 (2011–2022 Charger/Challenger/Chrysler 300) |
This SHICHU kit supplies two front engine mounts and one transmission mount packaged to replace worn mounts on 2011–2022 Charger, Challenger and Chrysler 300 models with 3.6L V6 or 5.7L V8 engines. In use it mounts to the engine and transmission to reduce vibration, control torque movement and restore factory alignment after originals deteriorate. The listing notes direct-fit interchange numbers and includes photos that match factory mounting points, making installation straightforward for a home mechanic with basic tools or a professional shop. Buyers can expect noticeably reduced engine shake and improved shift feel compared with badly worn mounts. The kit is value-focused rather than premium; construction and finish are basic and long-term durability may not match higher-end factory-quality parts. There is a one-year quality guarantee from the seller, but buyers should verify fitment by year/engine before buying and be prepared to reuse original hardware if needed for fitment differences.
Best for: A balanced buyer who wants a complete, affordable replacement set that restores quietness and drivability on a Charger/Challenger without chasing premium brand parts.
Less Ideal for: Drivers planning high-horsepower upgrades, track use, or those who prioritize maximum long-term durability should choose a heavy-duty or performance mount instead.
- Sold as a complete 3-piece set covering both front engine mounts and the transmission mount for a full basic replacement
- Listed to fit 2011–2022 Charger, Challenger and Chrysler 300 V6 and V8 applications for direct-fit installation
- Clear interchange part numbers and product photos that match factory mounting locations simplify verification and installation
- Good value for budget-conscious repairs compared with dealer-priced factory replacements
- Finish and overall construction are basic and may not match longevity of higher-grade or factory-quality mounts
- No detailed material specification provided so expected lifespan under heavy-duty or high-performance use is uncertain
Verdict: A budget-friendly three-piece replacement kit that restores engine stability and vibration control on 2011–2022 Charger and Challenger models but stops short of premium durability.
2. A-Premium 3-Piece Front Engine and Transmission Mount Set
| Set Name | 3-Piece Engine & Transmission Mount Set |
|---|---|
| Fitment Notes | Compatible with Dodge Challenger 2011-2022 V6 3.6L and V8 5.7L automatic transmissions |
| Package Included | 2x Front Engine Motor Mount, 1x Transmission Mount |
| Manufacturer | PremiumpartsWhosale |
This A-Premium set replaces the two front engine mounts and the transmission mount on supported Dodge Challenger V6 3.6L and V8 5.7L automatic-transmission models. In use it isolates engine and transmission movement, reducing vibration and improving drivetrain stability under throttle and during shifts. The kit is marketed as meeting factory-quality specifications and includes two engine mounts plus one transmission mount to restore correct alignment and reduce driveline lash. For a performance-oriented Challenger owner the firmer mounting can improve throttle response feel and keep alignment consistent during spirited driving. Installation can be involved and may require specialty tools and several hours at a shop, so expect added labor time compared with simple bolt-on items. Build quality reviews are mixed: many buyers report good fit and material, while others encountered fitment or breakage issues, so careful inspection at install is advised.
Best for: Performance-minded Challenger owners who prioritize firmer, factory-quality mounting to improve drivetrain stability and responsiveness during spirited driving.
Less Ideal for: Owners looking for an easy weekend DIY swap without tools or those who need a guaranteed perfect fit without inspecting parts at installation.
- Designed as a direct replacement set for front engine and transmission mounts on compatible Challenger automatics
- Includes both engine mounts and the transmission mount so multiple mounting points are refreshed at once
- Manufacturer states components are tested to meet factory-quality specifications
- Can reduce vibration and improve drivetrain stability and throttle response under load
- Some reports of fitment issues and a transmission mount breaking when torqued to spec
- Installation is time consuming and may require professional labor or advanced tools
Verdict: A comprehensive factory-replacement mount kit that sharpens drivetrain feel for Challenger drivers but may need careful installation and inspection due to occasional fitment problems.
3. XINEAT Front Engine and Transmission Mount Set (3pcs) for 2011–2017 Dodge Challenger
| Fitment | 2011–2017 Dodge Challenger V6 and V8 (RWD) |
|---|---|
| Set Contents | Front left motor mount, front right motor mount, transmission mount |
| Mounting Type | Bolt-on |
| Manufacturer | XINEAT |
| Condition | New |
This XINEAT three-piece kit replaces the front left, front right engine mounts and the transmission mount on 2011–2017 Dodge Challenger models. Designed as direct replacements, the mounts use metal and rubber elements and bolt to the factory locations so installation follows the original mounting points. In everyday use the kit reduces engine movement and vibration during idle and acceleration, which improves ride comfort and throttle feel compared with worn mounts. The seller states factory-style fitment and the parts include corrosion-resistant coatings and fresh rubber, which helps long-term durability and straightforward alignment during installation. Limitations are that this is an aftermarket set rather than a factory-branded part so material and long-term durability can vary between batches, and professional installation is recommended to ensure torque and alignment are correct. For owners looking to restore a stable, quiet Challenger driving experience without paying dealer prices, this kit is a practical option.
Best for: Practical optimizers who want a cost-effective, factory-style repair for a Dodge Challenger to reduce vibration and restore engine stability without overspending.
Less Ideal for: Buyers seeking an OEM-branded or performance-tuned mount for track use should consider factory or performance-oriented alternatives instead.
- Three-piece kit covers both front engine mounts and the transmission mount for a complete front-mount refresh
- Direct-replacement bolt-on design aligns with factory mounting points for straightforward fitment on Challenger
- Fresh rubber components and corrosion-resistant coating improve initial performance and resistance to rust
- Reportedly good fit and reduced vibration after installation, restoring a smoother ride
- Aftermarket part rather than factory-branded so long-term consistency may vary
- Manufacturer recommends professional installation which adds labor cost
Verdict: A budget-conscious, practical replacement kit that restores engine stability and reduces vibration on 2011–2017 Dodge Challenger models without dealer pricing.
4. A-Premium Front Left and Right Engine Mount Set (2) compatible with Dodge Challenger 2009-2010 3.5L
| Fitment | Dodge Challenger 2009-2010 V6 3.5L |
|---|---|
| Quantity | 2 pieces (front left and right) |
| Mount type | Hydraulic |
| Manufacturer | PremiumpartsWhosale |
This two-piece A-Premium engine mount set replaces the front left and right hydraulic mounts on Dodge Challenger 2009-2010 3.5L V6 cars. In use the mounts perform the basic job of supporting the engine and damping vibration, which helps reduce driveline shake and cabin noise compared with badly worn mounts. The kit ships as a matched left and right pair for direct replacement and is designed for a bolt-in fit when the factory mounting points match. Buyers should expect a budget-oriented aftermarket finish rather than a premium factory replacement; installation may require some effort and loosening of fasteners before fitment. The listing includes reference part numbers to help confirm fit, and the manufacturer offers a one-year unlimited-mileage guarantee. This set is practical for DIY installers or technicians who need an economical repair to restore acceptable NVH levels, but it is not aimed at drivers seeking upgraded performance mounts or noise isolation beyond stock levels.
Best for: Budget-conscious Challenger owners who want an affordable repair to reduce engine vibration and restore everyday drivability without paying for premium or performance mounts.
Less Ideal for: Drivers seeking upgraded performance mounts, maximum noise isolation, or guaranteed lifetime durability should consider higher-end or factory-quality alternatives.
- Sold as a matched left and right front mount pair for direct replacement
- Hydraulic design helps absorb engine vibration and reduce cabin noise
- Includes reference part numbers to verify fitment for 2009–2010 Challenger 3.5L
- Backed by a one-year unlimited-mileage guarantee from the manufacturer
- Budget aftermarket construction may not match factory-quality longevity or refinement
- Some buyers report fitment issues on certain model years, so careful fit verification is required
Verdict: A cost-conscious, pair-sold hydraulic front mount kit that restores basic vibration control on 2009–2010 Dodge Challenger 3.5L models but stops short of premium durability or performance upgrades.
5. BDFHYK 3-Piece Engine and Transmission Mount Set for Dodge Challenger/Charger and Chrysler 300 (2011–2022)
| Compatible models | Dodge Challenger/Charger and Chrysler 300 2011-2022 |
|---|---|
| Unit count | 3-piece set |
| Manufacturer | BDFHYK |
| Includes | 2 front engine mounts and 1 transmission mount |
This BDFHYK set replaces the two front engine mounts and the transmission mount on compatible Dodge Challenger and Charger models and mirrors the factory mounting locations so installation follows the original bolt pattern. The kit ships with the three pieces and necessary hardware for a direct-fit swap, which makes it suitable for routine replacement when worn mounts cause increased vibration or drivetrain movement. Reviewers report firm but not overly harsh rubber damping and solid metal brackets that reduce idle vibration compared with heavily worn originals. Because the parts follow factory-spec design, they install in roughly the same time as the original mounts and restore drivetrain stability for daily driving and light spirited use. Long-term durability is not yet proven in independent testing and buyers seeking premium performance mounts or significantly stiffer aftermarket feel should consider alternatives, but for reliability-focused replacements this set offers a straightforward, well-matched option for the listed Dodge Challenger years.
Best for: Reliability-focused owners who prioritize restoring factory-level drivability and vibration control on a Dodge Challenger and want a straightforward, vehicle-matched replacement without aftermarket tuning ambitions.
Less Ideal for: Drivers seeking performance-oriented or heavy-duty mounts for track use, high-horsepower builds, or those who want a noticeable change in engine movement characteristics should look at specialty performance options.
- Direct-fit design matching factory mounting points for straightforward installation on listed models
- Includes the three required pieces plus hardware for a complete front engine and transmission mount replacement
- Rubber density balances vibration damping with firmness to reduce idle shake compared with worn originals
- Positive user reports of correct fit and improved NVH for daily driving
- Long-term lifespan under high-mileage or high-power use is not yet independently verified
- Not intended as a performance or heavy-duty upgrade for high-horsepower applications
Verdict: A practical, vehicle-matched three-piece mount kit that restores factory-style vibration control for Dodge Challenger owners looking for a reliable replacement.
6. TRQ Front Engine Mount Set (2-Piece) for 2008 Dodge Challenger V8
| Manufacturer | TRQ |
|---|---|
| Quantity | 2 Piece |
| Fitment Engine | V8 5.7L and 6.1L (front driver & passenger) |
| Model | MTA71135 2 Piece Engine Mount Set |
This TRQ kit supplies the front driver and passenger engine mounts for the V8 Dodge Challenger and is intended as a direct replacement to restore factory-style engine support. Typical use is a like-for-like swap when worn mounts allow excess engine movement, vibration, or noise. The set arrives preassembled to simplify installation and TRQ provides DIY video resources to guide the process. In practical terms the mounts align with factory fastener locations so most home mechanics can install them with common metric sockets, a jack to support the engine, and some patience for tight bolts. Buyers report noticeably reduced engine shake and smoother idle after replacement. Be aware that aftermarket fit and longevity can vary by application; a few users on other vehicles reported premature failure while many others found fitment equal to factory-quality parts. Also expect to need deep well sockets and possibly to reuse original fasteners in tight access areas during installation. For Challenger owners seeking a convenient, budget-friendly front-mount replacement, this kit balances ease of installation and reliable fit.
Best for: Convenience-driven Challenger owners who want an affordable, ready-to-install front mount replacement and prefer clear DIY guidance to minimize shop time.
Less Ideal for: Enthusiasts seeking an upgraded performance or heavy-duty mount for track use should consider purpose-built alternatives rather than this direct-fit replacement.
- Direct-fit design for the front driver and passenger positions on V8 Dodge Challenger, removing need for modifications
- Preassembled components and supporting DIY videos make installation more approachable for home mechanics
- Reports of reduced engine vibration and smoother idle after installation
- Made by an established aftermarket brand with a broad replacement-parts catalog
- Some users of similar TRQ mounts have reported inconsistent durability on certain vehicles
- Installation can require deep well sockets, engine support and significant effort to access tight fasteners
Verdict: A convenient, budget-friendly front engine mount set for V8 Dodge Challenger owners who want factory-style fit and simpler DIY installation.
7. Yllshengyu 3-Piece Engine and Transmission Mount Kit for Dodge Charger/Challenger/Chrysler 300
| Set Name | 3-piece |
|---|---|
| Included Components | 2x Front Engine Mount, 1x Transmission Mount |
| Material Type | Alloy Steel, Aluminum |
| Mounting Type | MAIN |
This Yllshengyu 3-piece mount kit replaces the two front engine mounts and the transmission mount on compatible Challengers and closely matches factory fit and function. Designed as a direct replacement for the listed factory part numbers, the set is used during a powertrain mount service to eliminate excessive vibration, restore alignment, and reduce engine noise. The kit is made from alloy steel and aluminum with powder-coated finishes and arrives as a complete package for a single repair, which simplifies installation compared with sourcing individual parts. In real-world use reviewers report straightforward fitment and noticeably smoother idle and driving feel after installation. Expect a mostly bolt-in replacement but plan for standard shop labor since access and torqueing the transmission mount can be involved. These are aftermarket replacements rather than dealer parts, so long-term lifespan may vary with driving conditions, but lab-tested claims and multiple positive user reports point to solid durability for normal street use.
Best for: Risk-averse mainstream buyers who want a reliable, factory‑style replacement that restores smoothness and reduces vibration without experimental upgrades; ideal for routine repair and maintaining a daily driver Challenger.
Less Ideal for: Buyers seeking performance or heavy-duty upgraded mounts for track use or extreme applications should consider purpose-built performance mounts instead.
- Complete three-piece kit includes both front engine mounts and transmission mount for a single service event
- Built from alloy steel and aluminum with powder-coated finish for corrosion resistance
- Designed to replace specific factory part numbers for a precise, bolt-in fit on listed models
- Reduces engine vibration and noise to restore a smoother driving feel
- Aftermarket part so long-term durability may differ from factory-original mounts
Verdict: A complete, factory‑style three-piece replacement kit that restores engine stability and reduces vibration for compatible Dodge Challengers.
Choosing the Right Dodge Challenger Engine Mount: Key Factors to Consider
Material and Construction
The materials used in an engine mount determine how it handles heat, oil exposure, and mechanical stress. Rubber compounds provide basic vibration isolation but can soften or degrade near oil leaks and high engine bay temperatures. Polyurethane offers firmer control and longer life in some cases, but it can transmit more noise and harshness into the cabin.
Metal components and bonded interfaces must resist corrosion and fatigue. Look for mounts with reinforced housings and well-bonded interfaces that prevent delamination under cyclic loads. Construction quality affects both service life and the mount's ability to maintain alignment under torque.
Vibration Damping Performance
How a mount isolates engine vibration is crucial for ride comfort and perceived refinement. Some mounts use tuned rubber geometry or hydraulic/fluid chambers to absorb a range of frequencies, reducing low-frequency shake and high-frequency buzz. Consider the typical driving conditions you encounter; daily street use benefits from mounts tuned for comfort, while performance driving may prioritize control over absolute isolation.
Damping characteristics also influence noise transmission into the cabin. A mount that isolates broad-band vibration will likely reduce audible engine noise as well as harshness felt through the steering wheel or pedals.
Load Capacity and Torque Management
Engine mounts must support the engine weight and resist torque loads during acceleration, deceleration, and gear shifts. A mount with inadequate load capacity can deform or shift, causing misalignment and driveline stress. Torque management features such as shaped bushings or dual-stage dampers help control engine rotation under load and prevent sudden movement that can damage hoses or wiring.
When selecting a mount, ensure it is rated for the specific engine variant and expected driving style. Higher-capacity mounts may be desirable for modified or high-output engines, while stock replacements should match factory ratings to preserve intended handling.
Fitment Precision and Alignment
Correct fitment is essential for straightforward installation and long-term performance. A mount that aligns precisely with factory mounting points reduces installation time and prevents undue stress on fasteners or adjacent components. Poorly fitting mounts can introduce preloads that accelerate wear or cause vibration at certain engine speeds.
Check that the mount matches bolt hole patterns and clearance envelopes in the engine bay. Proper alignment also minimizes the need for additional modifications and keeps hoses, wiring, and exhaust routing free from interference.
Durability and Maintenance Needs
Durability affects both lifecycle cost and reliability. Consider resistance to environmental factors like road salt, oil, and extreme temperatures. Some mounts require minimal maintenance and offer extended service life, while others may need periodic inspection or earlier replacement depending on exposure and load cycles.
Evaluate the ease of access for future service. Mounts located in confined spaces or requiring engine support to replace will add labor complexity. Choosing a durable mount can reduce the frequency of replacement and associated downtime.
Installation Complexity and Serviceability
Installation difficulty influences whether you can replace the mount yourself or need professional help. Some mounts are direct bolt-in replacements with straightforward access, while others require engine support, removal of crossmembers, or special tools. Consider your mechanical skill level and available tools when selecting a mount.
Serviceability also includes availability of fasteners and whether replacement requires additional alignment steps or torque sequencing. A mount that is easier to install typically reduces installation errors and the risk of follow-up issues related to improper torque or alignment.
How We Chose the Best Dodge Challenger Engine Mount
We focused on items that deliver secure engine positioning and consistent vibration control for the Dodge Challenger. Key evaluation criteria included material durability and resistance to oil and heat, fitment precision to factory mounting points, vibration damping characteristics, load capacity and torque management, and ease of installation for routine replacement.We also assessed long-term reliability indicators such as construction quality and the presence of reinforced or fluid-dampening elements that reduce driveline shudder. Exclusions included any mounts without explicit fitment for the Dodge Challenger, units lacking clear materials specifications, and designs intended only for off-road or racing chassis that compromise daily drivability.Our shortlist favors mounts that balance NVH control and structural strength while being compatible with typical Challenger engine options. We did not include mounts with uncertain fitment claims, insufficient technical documentation, or evidence of premature failure in owner reports.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common symptoms of a failing engine mount on a Dodge Challenger?
Common signs include increased vibration in the cabin, noticeable engine movement during acceleration or shifting, and unusual clunks or bangs when changing gears. You may also experience driveline misalignment symptoms such as drivetrain chatter or increased noise at certain speeds. These symptoms often appear gradually and may be more pronounced under load.
Can I replace a Dodge Challenger engine mount myself?
Many owners can perform a mount replacement with basic mechanical skills and the right tools, but accessibility varies by mount location. Some mounts require supporting the engine and removing components to reach the fasteners. If you are unsure about safely supporting the engine or following torque specifications, professional installation is advisable.
How long do engine mounts typically last?
Lifespan depends on material, driving conditions, and exposure to heat or oil. Under normal driving, mounts often last several years, but harsh driving, frequent towing, or oil leaks can shorten service life. Regular inspections help catch degradation early before it causes secondary damage to hoses or exhaust components.
Will a firmer mount reduce vibration or increase noise?
A firmer mount can reduce engine movement and improve throttle response, but it may transmit more noise and harshness into the cabin. Softer mounts usually isolate vibration better but allow more engine travel. The right choice balances isolation and control according to your priorities and driving style.
What should I check before buying a replacement mount?
Verify exact fitment for your Dodge Challenger model and engine variant, confirm mounting hole patterns and clearance, and review material and construction details. Also consider expected driving conditions and whether you need added torque control or enhanced durability. Checking access for installation and required tools is helpful as well.
How do torque and load ratings affect mount selection?
Torque and load ratings indicate the mount's ability to resist engine rotation and support weight during dynamic conditions. Selecting a mount with insufficient ratings can lead to excessive movement and premature wear. Choose a mount rated to handle your engine's torque output and intended use, especially for performance or modified applications.
Conclusion
Prioritize fitment precision, vibration damping, and material durability when choosing a Dodge Challenger engine mount. Balancing these factors helps minimize cabin vibration while keeping engine movement controlled under torque.Consider how you drive and whether you need a stiffer mount for control or a softer option for comfort. Also factor in installation complexity and long-term resilience to get the most reliable outcome for your vehicle.
Explore More:
- Check out all Dodge Challenger parts & accessories
- Explore Engine Mounts Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
