Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your 2008-2013 Nissan Rogue is showing extra vibration, clunks during acceleration, or abnormal engine movement, a worn engine mount is a common cause. Choosing the right engine mount replacement matters because fit, material quality, and mounting tolerance directly affect ride comfort, engine alignment, and long-term durability.This guide presents a shortlist of the seven best engine mounts compatible with the 2008-2013 Nissan Rogue. We evaluated options that prioritize fitment accuracy, vibration isolation, and serviceability so you can restore smooth operation and reduce noise. Below you will find the picks followed by clear decision criteria to help you select the right mount for your driving needs and maintenance plan.
Looking for other parts? See all Nissan Rogue parts & accessories.
Top Picks at a Glance
1. BEBLEPANY 4-Piece Engine and Transmission Mount Kit for 2008–2013 Nissan Rogue / 2014–2015 Rogue Select 2.5L
| Compatible vehicles | 2008-2013 Nissan Rogue 2.5L L4; 2014-2015 Rogue Select 2.5L L4 |
|---|---|
| Included components | Automatic transmission mount (left), engine mount (right), two right upper torque struts |
| Manufacturer | BEBLEPANY |
| Manufacturer part number | MY1K0768 |
| Unit count | 1.0 Count |
This BEBLEPANY 4-piece kit replaces the right engine mount, two right upper torque struts, and the left automatic transmission mount for the Nissan Rogue 2.5L. It is intended as a direct bolt-on replacement to restore proper engine positioning, reduce vibration and shudder during acceleration, and quiet clunks from failing torque struts. Construction pairs steel brackets with molded rubber to provide factory-style dampening for everyday driving and commuting. The kit is useful when multiple mounts are aged or collapsed because replacing all major supports at once helps prevent uneven wear and keeps engine loads balanced. Installation is straightforward for a mechanically inclined DIYer with a jack and basic tools, but the product notes recommend professional installation to ensure safe support of the engine. These are aftermarket parts so buyers should expect typical variability compared with factory parts and confirm fit by cross-referencing the listed reference numbers before installing.
Best for: Buyers who want a complete, vehicle-specific replacement set to stop engine shudder and reduce vibration on a Rogue 2.5L and prefer replacing all major mounts at once for a balanced repair.
Less Ideal for: If you only need a single worn mount or want an exact factory-sourced part, this full aftermarket kit may be more than required or not match OEM material specs.
- Vehicle-specific fitment for 2008–2013 Nissan Rogue and 2014–2015 Rogue Select 2.5L for a direct bolt-on replacement
- Replaces four critical mounts (engine, transmission left, and both right upper torque struts) to address shuddering and engine movement
- Steel bracket and rubber construction aimed at restoring factory-style vibration dampening
- Sold as a complete kit so all related mounts can be changed at once to balance loads and extend service life
- Aftermarket part quality can vary compared with factory replacements, so careful inspection is advised before installation
Verdict: Choose this complete kit when you want a straightforward, vehicle-specific solution to stop engine shudder and restore stable, quieter operation on a Rogue 2.5L.
2. AISIN Hydraulic Front Right Engine Motor Mount (EMTN-00158)
| Position | Front Right |
|---|---|
| Mount Type | Hydraulic |
| Compatible Engines | L4 2.5L |
| Quantity | 1 |
This hydraulic front-right engine mount from Aisin replaces the factory mount on 2.5L Nissan Rogue and Sentra applications to reduce engine movement and restore original drivability. It is a direct-replacement, bolt-in design built from aluminum, rubber, and steel with solid welding at critical joints to resist loosening. In daily use it quiets engine vibration and keeps the powertrain aligned under acceleration and deceleration, which helps maintain smoother throttle response and drivetrain feel. Hydraulic construction helps dampen harshness without transmitting excessive vibration to the chassis, making it a good fit for drivers who want performance-oriented control while retaining comfort. Installation is typical for motor mounts and usually requires basic hand tools and moderate mechanical experience. Limitations are that it is a single front-right unit so replacing only this mount may not fully address noise or vibration caused by worn mounts elsewhere, and motor-mount replacement does not alter engine power or handling beyond reducing movement.
Best for: Drivers seeking a performance-minded replacement that tightens engine control and reduces movement without sacrificing ride comfort, especially those restoring drivetrain feel on affected 2.5L Nissan Rogue or Sentra models.
Less Ideal for: People looking for an all-in-one vibration fix without inspecting other mounts or those wanting to upgrade to stiffer performance-only mounts.
- Direct-replacement design for bolt-in installation with factory fitment
- Hydraulic construction reduces vibration transfer while controlling engine movement
- Durable materials and solid welding at joints to resist loosening over time
- Specifically matched to Nissan 2.5L front-right position for correct fit
- Sold as a single mount so other worn mounts may still cause vibration
- Requires moderate mechanical skill and tools for proper installation
Verdict: Choose this hydraulic Aisin front-right mount to restore factory-like engine isolation and tighter drivetrain control on 2008–2013 Nissan Rogue 2.5L cars.
3. SCITOO Engine and Transmission Mount Set with Torque Strut for Nissan Rogue (2008–2013, Rogue Select 2014–2015)
| Fitment | Nissan Rogue 2008-2013, Rogue Select 2014-2015 |
|---|---|
| Materials | Alloy Steel, Aluminum |
| Mounting Type | Chassis Mount |
| Included Components | Engine mount, transmission mount, torque strut mount set |
This SCITOO kit supplies a complete replacement set of engine mounts, a transmission mount, and torque strut mounts for Nissan Rogue model years 2008–2013 and Rogue Select 2014–2015. Intended as a direct-fit replacement, the parts are made from alloy steel and aluminum with a polished finish and are mounted to the chassis to reduce engine movement and vibration. In practice this set restores the factory support lost to worn mounts, improving ride comfort and reducing drivetrain vibration and noise when accelerating or shifting. The listing notes OE part-number matches and recommends verifying part numbers before installation, which helps avoid fitment errors. Because the kit covers multiple mount locations you can replace all aging supports at once rather than swapping single pieces, saving labor if you are doing the work yourself or having a shop handle the job. Buyers should plan for a proper alignment of bolt patterns and expect basic mechanical installation or shop labor since the parts require safe mounting and torque specs to be effective.
Best for: Drivers looking to restore factory ride comfort and reduce engine vibration on a 2008–2013 Rogue or 2014–2015 Rogue Select who prefer replacing all worn mounts in one service interval to minimize repeated labor.
Less Ideal for: Someone wanting a single-point fix for a minor noise or a performance-oriented mount with stiffer bushings should consider different, specialized options.
- Complete set replaces engine mount, transmission mount, and torque struts so all major supports are refreshed at once
- Constructed from alloy steel and aluminum for corrosion and heat resistance
- Listed to match known factory part numbers to simplify fitment checks
- Polished finish and chassis-mount design mirror factory-style installation
- Requires verification of exact part numbers to ensure correct fit
- Installation requires mechanical skill or shop labor to properly torque and position mounts
Verdict: A practical full-replacement mount kit for Nissan Rogue owners who want to restore factory comfort and eliminate drivetrain vibration in one job.
4. YEOPGYEON Engine Motor Mounts Set for Nissan Rogue and Sentra (A4351/A4352)
| Compatible Vehicles | Nissan Rogue 2008-2013, Rogue Select 2014-2015, Sentra 2007-2012 (2.5L) |
|---|---|
| Included Components | Motor Mounts (front upper and lower torque strut mounts) |
| Material | Rubber and Metal |
| Manufacturer Part Number | HS-1K0616 |
This YEOPGYEON engine motor mounts set replaces the front upper and lower torque strut mounts on compatible Nissan Rogue and Sentra 2.5L models. The mounts combine rubber and heat-treated steel to absorb engine torque and reduce vibration and noise, which helps restore driving comfort and engine stability. Installation is intended to be a direct replacement with no modifications required, so it is suitable for DIY mechanics and independent shops. Practical benefits include improved smoothness under acceleration and a firmer engine feel compared with worn mounts. Because the kit is aftermarket and uses rubber for damping, expect slightly firmer engine movement than some factory-style mounts but better consistency over worn originals. The product is compact and straightforward to install, but buyers should verify the listed interchange numbers match their vehicle and may want to compare with higher-end options if ultra-quiet or performance-focused mounts are a priority.
Best for: Buyers looking to replace worn engine mounts on a 2008–2013 Nissan Rogue or related Sentra models who prioritize an affordable, reliable repair that restores engine stability and reduces vibration.
Less Ideal for: Drivers seeking ultra-quiet, premium OEM-equivalent mounts or performance-tuned engine mounts should consider higher-end or vehicle-specific alternatives.
- Designed as direct replacements for front upper and lower torque strut mounts on specific Nissan Rogue and Sentra 2.5L models
- Rubber and heat-treated steel construction balances durability with vibration damping
- Marketed as tested during manufacturing for consistent performance
- Simple, no-modification installation suitable for DIY replacement
- Aftermarket rubber mounts can feel firmer than factory comfort-oriented mounts
- Fitment limited to the specified Rogue and Sentra 2.5L years and engine; not universal
Verdict: A cost-conscious, direct-replacement mount kit that restores engine stability and reduces vibration for 2.5L Nissan Rogue and Sentra models without requiring modifications.
5. Yllshengyu 4-Piece Engine Motor Mount Kit for Nissan Rogue 2.5L 2WD (2008–2013) & Rogue Select (2014–2015)
| Compatible Models | Nissan Rogue 2008-2013, Rogue Select 2014-2015 |
|---|---|
| Engine | 2.5L |
| Drive Configuration | 2WD |
| Included Parts | Front right motor mount, transmission mount, front upper torque strut, rear lower torque strut |
This four-piece mount kit replaces the front right motor mount, transmission mount, front upper torque strut, and rear lower torque strut specified for the Nissan Rogue 2.5L 2WD and Rogue Select. It is intended as a direct factory-quality replacement for the listed part numbers so installers can swap all primary engine supports in one job. In use the mounts are built to control engine torque, reduce vibration and lower cabin noise compared with worn rubber mounts, and carrying out a full kit replacement avoids mismatched part life between components. The kit claims durable construction and precision fit for a straightforward bolt-in install when fitment is confirmed. Expect the biggest practical benefit to be restoring smoothness and drivability without having to hunt individual parts. Limitations are typical of aftermarket mounts: longevity depends on driving conditions and installation torque, and some buyers prefer branded OE pieces for long-term peace of mind.
Best for: Buyers who prioritize restoring reliable, quiet engine operation with a single coordinated replacement and want straightforward fitment for the specified Rogue models.
Less Ideal for: Drivers seeking factory-branded parts with an extended manufacturer track record or those who prefer replacing only a single mount at a time to save on immediate cost.
- Complete 4-piece kit replaces all primary engine and transmission mounts for one coordinated service
- Designed to match listed factory part numbers for straightforward fitment to the specified Rogue models
- Engineered to reduce vibration and cabin noise compared with worn mounts
- Durable construction intended to meet or exceed factory-spec performance
- Actual lifespan varies with driving conditions and installation quality
Verdict: A convenient, factory-replacement fitment kit for Nissan Rogue owners who want a reliable, all-in-one refresh of worn engine mounts to restore smoothness and reduce vibration.
6. Yllhaoyuan Engine Mount Kit — 4-Piece Set for 2008–2015 Nissan Rogue 2.5L 2WD
| Fitment | 2008–2013 Nissan Rogue, 2014–2015 Rogue Select 2.5L 2WD |
|---|---|
| Unit Count | 4 mounts |
| Mounting Type | Chassis Mount |
| Manufacturer | Yllhaoyuan |
This Yllhaoyuan kit supplies all four mounts needed to stop excessive engine movement and reduce vibration for Nissan Rogue 2.5L 2WD models from 2008–2013 (and Rogue Select through 2015). The set includes the front right motor mount with bracket, transmission mount, front upper torque strut, and rear lower torque strut so you can replace worn mounts together and restore balanced support. The mounts use reinforced rubber to resist heat and oil and to dampen noise and shake; that construction should noticeably reduce idle and acceleration vibration and lower cabin buzz. Because the kit cross-references factory part numbers, fitment and installation are straightforward for a competent DIYer or a shop, and replacing all mounts at once helps prevent uneven wear. Limitations: this is an aftermarket replacement so long-term durability may vary compared with higher-end branded parts, and professional installation may be needed if you lack tools or experience.
Best for: Buyers who want a full, straightforward repair to eliminate engine shake and vibration and prefer a single kit to replace every worn mount at once, guided by compatibility with their Rogue model years.
Less Ideal for: Shoppers seeking top-tier OEM or performance mounts with documented long-term warranty support or those wanting mounts for different engines or drivetrains should look elsewhere.
- Complete kit includes four mounts to restore engine and transmission stability in one service
- Cross-referenced with factory part numbers for easier fitment and installation
- Reinforced rubber construction designed to dampen vibration and reduce cabin noise
- Covers the specific 2.5L 2WD Rogue and Rogue Select model years listed for direct replacement
- Aftermarket build quality can vary and may not match premium factory-quality longevity
Verdict: This four-piece Yllhaoyuan kit is the practical choice to restore factory-level engine stability and cut vibration on 2008–2013 Rogue 2.5L 2WD models by replacing all worn mounts at once.
7. SHICHU Engine Motor Mount Set (4-piece) for Nissan Rogue 2008–2013 / Rogue Select 2014–2015 AWD 2.5L
| Compatible vehicles | Nissan Rogue 2008-2013, Rogue Select 2014-2015 AWD 2.5L |
|---|---|
| Material Type | Rubber, Steel |
| Unit Count | 4.0 Count |
| Manufacturer Part Number | CF7370 |
This SHICHU four-piece engine motor mount kit replaces the front right motor mount, transmission mount, and two torque strut mounts for Nissan Rogue 2008–2013 and Rogue Select 2014–2015 AWD 2.5L models. Built from steel with rubber hydraulic-style mounts, the kit is intended to reduce engine movement and vibration transferred to the chassis and cabin. Installation is typical of direct-fit replacement mounts and can be done by a competent DIYer with basic tools, though access to the transmission mount may require a lift or jack support. The main benefits are restoring factory-like engine stability and smoothing low-frequency vibration that develops when OE mounts age. Limitations include the typical lifespan variance of aftermarket mounts compared with higher-end branded OE replacements and the need to confirm correct interchange numbers or fitment before buying. The set includes components needed for a full front-mount refresh so you avoid sourcing individual pieces separately.
Best for: Buyers who prioritize replacing worn mounts with a complete, vehicle-specific kit to restore quiet operation and reduce engine vibration without sourcing multiple parts.
Less Ideal for: Shoppers seeking upgraded performance or heavy-duty mounts for aggressive driving should consider hardened or performance-specific replacements instead.
- Complete four-piece kit covers front right engine mount, transmission mount, and both torque struts to simplify a full front-mount service
- Steel construction with rubber hydraulic-style elements to help control vibration and engine movement
- Marketed specifically for Nissan Rogue 2008–2013 and Rogue Select 2014–2015 AWD 2.5L which reduces fitment guesswork if interchange is verified
- Aftermarket build quality and longevity can vary compared with higher-end factory-quality replacements
Verdict: A convenient four-piece replacement kit that restores engine stability and cabin comfort for 2008–2013 Nissan Rogue and 2014–2015 Rogue Select AWD 2.5L owners looking for a straightforward, vehicle-targeted repair.
Choosing the Right 2008-2013 Nissan Rogue Engine Mount: Key Factors to Consider
Fitment and Mounting Accuracy
Accurate fitment is essential because incorrect mounting points or misaligned holes lead to premature wear and added stress on adjacent drivetrain components. For the 2008-2013 Nissan Rogue, a mount that matches factory bolt patterns and clearance envelopes reduces installation time and avoids interference with engine covers, heat shields, and adjacent brackets.
Mounting accuracy also affects engine alignment. Even small deviations can change driveline angles, increasing strain on axles and transmission mounts. When evaluating options, check that the mount provides explicit fitment for the Rogue year range and that included hardware matches factory specifications to ensure a straightforward replacement.
Vibration Isolation and Rubber Compound
The rubber or elastomer in the mount determines how much engine vibration is transferred to the chassis. Softer compounds isolate idle and low-frequency vibrations better but may allow more engine movement under load. Stiffer compounds resist torque-induced movement but can transmit more vibration into the cabin.
For everyday driving in a Rogue, choose a mount balanced between isolation and control. Understand that aftermarket materials vary; look for specifications that describe durometer or vibration-dampening design elements, and consider whether reduced vibration or tighter engine control is the priority for your use case.
Durability and Material Quality
Durable mounts resist oil, heat, and road contaminants that degrade rubber and metal over time. The 2008-2013 Rogue operates in varied climates, so exposure to salt, heat, and engine fluids can accelerate deterioration. Construction quality such as bonded bushings, corrosion-resistant metal plates, and reinforced brackets extends service life and reduces the chance of sudden failure.
Inspect material specs and manufacturing notes. Mounts that use higher-grade metals, protective coatings, and well-bonded elastomers generally last longer and maintain performance under typical driving conditions for this vehicle.
Load Capacity and Torque Handling
Engine mounts must support static engine weight plus dynamic loads from acceleration, braking, and cornering. Torque-induced forces can cause mounts to shift or fatigue, especially at the transmission side or torque-mount locations. A mount rated for appropriate load and torque handling prevents excessive engine tilt that can stress hoses, cables, and drivetrain components.
Look for mounts that specify load ratings or design features for torque management. For vehicles used in towing, steep terrain, or spirited driving, lean toward mounts with higher torque-handling characteristics to preserve alignment and reduce movement.
Serviceability and Installation Considerations
Ease of installation matters for owners planning DIY replacement or for technicians aiming to minimize shop time. Mounts that include correct bushings, bolts, and clear instructions reduce the risk of misassembly. Consider whether engine lifting tools or support brackets are required, and whether the mount allows for bolt replacement without removing other major components.
Also review torque specifications provided by the manufacturer. Proper tightening is critical to prevent squeaks, noise, or accelerated wear. A mount that simplifies alignment or comes with alignment marks will speed up installation and improve long-term performance.
Noise and NVH Performance
Noise, vibration, and harshness behavior determines cabin comfort. Some mounts introduce higher-frequency noise while others reduce low-frequency rumble. For the 2008-2013 Rogue, occupants are often sensitive to extra vibration at idle and during acceleration, so selecting a mount with good NVH characteristics improves perceived quality.
Manufacturers may design mounts with internal chambers or tuned elastomer shapes to damp specific frequencies. When possible, prioritize mounts that explicitly address NVH performance and include testing or spec details that indicate reduced vibration transfer.
Common Symptoms That Indicate a Worn Engine Mount
Several telltale signs point to a failing engine mount on a 2008-2013 Nissan Rogue. Excessive vibration at idle or during acceleration, especially felt through the floor or steering column, is a primary indicator. You may also notice clunking or banging noises when shifting from park to drive or during sudden throttle changes, which often result from increased engine movement.
Other symptoms include visible engine sag, misaligned driveline components, and accelerated wear on adjacent mounts or hoses. Paying attention to these cues helps determine whether a mount is the likely culprit versus other powertrain issues.
- Increased vibration felt in cabin at idle or low RPM
- Clunking noise during gear changes or sudden acceleration
- Visible engine movement or lean when revving
- Unusual wear on hoses, belts, or transmission mounts
Torque Mounts Versus Standard Engine Mounts
Torque mounts are designed to resist rotational forces produced by the engine and are commonly found where the engine experiences the most yaw under load. Standard mounts prioritize vertical load support and basic vibration isolation. For the 2008-2013 Rogue, understanding which mount location handles torque versus weight helps you choose the correct replacement component.
If the symptom is primarily engine tilt or aggressive movement under acceleration, a torque-mount solution with stiffer bushings or reinforced brackets may be appropriate. If the issue is more about general vibration and NVH at idle, a standard mount replacement focused on elastomer quality could be sufficient.
- Torque mounts resist engine rotation and sudden torque loads
- Standard mounts support engine weight and isolate vibration
- Select torque mounts for movement control, standard mounts for comfort
DIY Replacement: What To Expect
Replacing an engine mount on a 2008-2013 Rogue can be a DIY task for someone with mechanical experience and the right tools. Typical steps include safely supporting the engine, removing obstruction components, unbolting the old mount, and aligning the new mount before torquing bolts to specification. Clearance around the mount, corroded bolts, and required engine support height are common challenges.
Plan for time to clean mounting surfaces, replace severely corroded fasteners, and re-torque bolts after a short break-in period. If you are unfamiliar with engine supports or torque specifications, consider professional assistance since improper installation can cause drivetrain misalignment or accelerated wear.
- Safely support engine before unbolting mounts
- Expect to remove nearby brackets or intake components for access
- Use proper torque specs and re-check after initial use
Maintenance Tips To Prolong Mount Life
Routine inspections help catch early signs of mount failure. Look for cracks in the rubber, metal deformation, oil contamination, and loose or missing hardware. Preventive measures such as addressing oil leaks, avoiding aggressive engine revving when cold, and cleaning under-hood contaminants reduce stress on mounts and extend service life.
When performing other engine-related maintenance, take the opportunity to visually inspect mounts and note any alignment changes. Replacing a single mount when others are aged may transfer load and accelerate failure, so consider condition across all mount points when planning repairs.
- Inspect mounts during oil changes or major service intervals
- Address oil leaks and engine fluid exposure promptly
- Consider replacing multiple mounts if others show similar age-related wear
Interpreting Vibration: Isolating the Mount From Other Causes
Vibration can originate from several systems, so isolating the engine mount as the cause requires process of elimination. Start with simple checks: engine misfires, wheel imbalance, and worn suspension components can all mimic mount-related vibration. Verify proper engine tuning and exhaust security before replacing a mount.
If vibration persists after basic checks, observe when it occurs. If vibrations increase when revving or during rapid throttle input and are accompanied by movement or clunks, the mount is more likely responsible. Document the conditions and symptoms to guide the repair or technician diagnosis.
- Check ignition and fueling issues before assuming mount failure
- Verify wheel balance and suspension condition for road-induced vibration
- Use symptom timing to determine engine-mount involvement
Still looking for the perfect fit?
Select your Nissan Rogue configuration to see the most relevant Engine Mounts recommendations
How We Chose the Best 2008-2013 Nissan Rogue Engine Mount
We prioritized items that address the specific needs of 2008-2013 Nissan Rogue owners, focusing on attributes that affect drivability, durability, and ease of installation. Evaluation criteria included fitment precision to factory mounting points, material composition and rubber durometer for vibration control, load capacity for engine torque and weight, and corrosion-resistant hardware for long-term reliability. We also considered design features that simplify installation such as matched bolt patterns and included mounting bushings.Excluded from consideration were parts lacking clear fitment data for the 2008-2013 Rogue, components intended for other Nissan models, and any mounts without measurable specifications on load rating or material. We favored mounts with documented torque capacity and clear serviceability notes, and we filtered out items that required extensive modification or custom fabrication. The result is a focused set of options that balance vibration isolation, alignment accuracy, and installability for this vehicle.
Our full evaluation process is outlined in our review methodology.
FAQ
How long do engine mounts last on a 2008-2013 Nissan Rogue?
Engine mount life varies based on driving conditions, exposure to oil, and load cycles. They often last many years under normal use, but signs of wear typically appear after prolonged service or after exposure to leaks or harsh driving.
What are the most common signs that an engine mount needs replacement?
Common signs include increased cabin vibration at idle, clunking noises during acceleration or gear changes, and visible engine movement. These symptoms often point to mount degradation rather than isolated drivetrain failures.
Can I replace a Rogue engine mount myself?
Yes, a competent DIYer with proper tools and an engine support can replace a mount. Expect to support the engine, remove obstructing components, and use correct torque specs. When in doubt about alignment or required tools, seek professional help.
Will replacing one mount require replacing the others?
Not always. If other mounts are in good condition and show no visible wear, you can replace only the failed mount. However, replacing multiple mounts at once can balance load distribution and may be wise if the remaining mounts are similarly aged.
Do torque mounts cost more to replace than standard mounts?
Torque mounts can be more complex in design and may require firmer rubber or reinforced brackets, which can affect cost. Installation complexity may also differ because torque mounts often handle higher loads and require precise alignment.
How can I tell if vibration is from a mount or another issue?
Observe when the vibration appears. If it correlates with engine revs, rapid throttle input, or results in physical engine movement and clunks, it likely involves a mount. If vibration occurs only at road speeds and not at idle, investigate wheels, tires, and suspension first.
Final Verdict
When selecting an engine mount for a 2008-2013 Nissan Rogue, prioritize accurate fitment, balanced vibration isolation, and materials that withstand heat and contaminants. Consider the vehicle's typical use: choose mounts with stronger torque-handling features if you need tighter control under load, or opt for elastomer-focused mounts if cabin comfort and NVH reduction are paramount.Weigh the tradeoffs between firmness and isolation, confirm fitment and included hardware, and plan for proper installation with correct torque values. Doing so will restore smoother operation and protect adjacent drivetrain components while delivering predictable long-term performance.
Explore More:
- Check out all Nissan Rogue parts & accessories
- Explore Engine Mounts Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts






