Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Picking the right Nissan Rogue engine mount matters because a worn or incorrect mount affects ride comfort, drivetrain alignment, and long-term component wear. You want a mount that restores proper engine position, reduces vibration that transfers to the cabin, and withstands daily driving stresses. This guide covers seven shortlisted engine mounts that meet common fitment and durability needs. We evaluated each option using criteria that matter to Rogue owners, like fit accuracy and vibration isolation. Read on to find the mounts that best match your repair or upgrade goals.
Looking for other parts? See all Nissan Rogue parts & accessories.
Top Picks at a Glance
1. Yllshengyu 4-Piece Engine Motor Mount Kit for Nissan Rogue (2008–2013) & Rogue Select (2014–2015) 2.5L 2WD
| Set Name | Engine Motor Mount Kit |
|---|---|
| Model | A7370 A7384 A4351 A4352 |
| Manufacturer | Yllshengyu |
| Manufacturer Part Number | BBAA44 |
This Yllshengyu kit replaces the four main engine and transmission mounts on the Nissan Rogue and Rogue Select, providing a complete swap for worn or failed factory mounts. It includes the front right motor mount with bracket, the transmission mount, and both torque strut mounts so you can restore engine positioning and reduce vibration in one job. Customers report a noticeable drop in NVH after installation and many find the parts match factory fitment closely, which simplifies installation when reusing original hardware. Build quality aims to meet or exceed factory specifications, though a few users have mixed long-term durability experiences, so expect typical lifespan variance for aftermarket mounts. This kit is a practical, lower-cost alternative to dealer parts when you need to correct engine movement, eliminate vibration, and avoid piecemeal purchases, but drivers seeking guaranteed long-term OEM longevity may prefer an OEM replacement or higher-end aftermarket option.
Best for: Reliability-focused owners who prioritize restoring factory behavior and reducing vibration affordably without buying parts individually.
Less Ideal for: Drivers seeking guaranteed long-term OEM-level durability or those who prefer dealer-sourced factory parts for extended warranties should consider alternatives.
- Complete 4-piece kit covers front motor, transmission, and both torque strut mounts for a full replacement
- Direct factory-replacement fit for Nissan Rogue 2008–2013 and Rogue Select 2014–2015 2.5L 2WD, simplifying installation
- Designed to reduce engine vibration and noise for a smoother ride
- Many buyers report close fitment and easier installation compared with sourcing individual parts
- Some buyers report inconsistent long-term durability compared with OEM mounts
- Quality appears variable across units which may lead to earlier replacement in high-mileage vehicles
Verdict A complete, budget-friendly replacement kit that restores engine stability and reduces vibration on compatible Nissan Rogue models, but with some variability in long-term durability.
2. Yllhaoyuan Engine Motor Mount Kit — 4-Piece Set for 2008–2015 Nissan Rogue 2.5L 2WD
| Vehicle fitment | 2008–2013 Nissan Rogue; 2014–2015 Rogue Select 2.5L 2WD |
|---|---|
| Unit count | 4.0 Count |
| Mounting type | Chassis Mount |
| Manufacturer | Yllhaoyuan |
This complete kit supplies the four mounts needed to replace worn motor and transmission mounts on the 2008–2013 Nissan Rogue and 2014–2015 Rogue Select with the 2.5L 2WD engine. It includes the front right motor mount with bracket, transmission mount, front upper torque strut, and rear lower torque strut so you can swap all critical mounts at once to rebalance engine support. The parts are molded from reinforced rubber compounds intended to resist heat and oil while damping vibration and engine movement to cut down on idle shake and cabin noise. Buyers report good fit and restored ride quality when the fitment matches; a few reviews note manufacturing or fit issues on isolated units so careful inspection at install is wise. This kit is practical for confident DIYers or a shop job because replacing all mounts together prevents uneven wear on remaining mounts, but some installers may need to clear minor casting flash or adjust bolt fit during installation.
Best for: Convenience-driven buyers who want a one-stop kit to quickly restore engine stability and reduce vibration without sourcing individual parts.
Less Ideal for: Buyers who require factory-brand verified parts or who prefer professional-only fitment verification should consider OEM alternatives or dealer-sourced mounts.
- Complete four-piece kit covers front, rear and transmission mounts for a full replacement.
- Form-fit replacement referenced to common OEM part numbers for straightforward installation.
- Reinforced rubber construction designed to damp engine vibration and reduce cabin noise.
- Many users report immediate improvement in vibration and ride quality after installation.
- Some customers reported manufacturing defects or incorrect hole alignment on isolated units.
- Occasional need for minor trimming or fastener adjustments during installation.
Verdict A convenient, full replacement kit that restores engine stability and reduces vibration for the specified Rogue years, but inspect parts at install for occasional fitment issues.
3. Vinsyut 4‑Piece Engine and Transmission Mount Kit for Nissan Rogue/Sentra 2.5L
| Vehicle fitment | 2008–2013 Nissan Rogue 2.5L, 2014–2015 Rogue Select 2.5L FWD, 2007–2012 Sentra 2.5L CVT |
|---|---|
| Kit contents | 4 pieces: front right engine mount, left transmission mount, front lower and upper torque strut mounts |
| Manufacturer | vinsyut |
This Vinsyut 4‑piece mount kit replaces the common front and torque strut mounts on Nissan Rogue and Sentra 2.5L CVT/FWD applications to restore engine stability and cut down vibration and drivetrain clunking. The set includes front right engine mount, left transmission mount, and upper and lower torque strut mounts so you can refresh the main rubber mounts in one job rather than buying pieces separately. In use it limits engine movement under acceleration and at idle, which protects exhaust and drivetrain linkages and makes the cabin feel smoother. The mounts advertise high-strength steel and premium rubber, which should give a firmer feel than degraded originals while still damping vibration. Installation is a moderate DIY job if you can safely support the engine, but proper torqueing at ride height is important. As with many aftermarket kits, long-term durability depends on rubber hardness and weld quality, so inspect hardware on arrival and recheck fasteners after initial miles.
Best for: Performance-oriented owners who prioritize restoring engine control and reducing drivetrain movement to improve throttle response and reduce stress on exhaust and axles.
Less Ideal for: Buyers seeking an exact factory-specified part pedigree or a lifetime maintenance-free solution should consider dealer-sourced factory replacements or heavy-duty performance mounts instead.
- Complete 4-piece kit covers the primary engine and torque strut mounts for a single refresh
- Designed to reduce vibration and drivetrain movement for smoother idle and acceleration
- Uses stamped steel brackets and rubber bushings intended to match factory fit and mounting points
- Longevity can vary with aftermarket rubber hardness and weld quality so lifespan is not guaranteed
- Installation requires safely supporting the engine and correct torque procedure, which may necessitate a shop for some owners
Verdict A convenient, performance-minded full mount refresh for 2.5L Nissan Rogue/Sentra that tightens engine control and reduces vibration, with typical aftermarket durability considerations.
4. PHILTOP Engine and Transmission Mount Kit for Nissan Rogue (2.5L)
| Mounting Type | Rubber Mount |
|---|---|
| Vehicle Fitment | Nissan Rogue 2008-2013, Rogue Select 2014-2015 2.5L |
| Package Included | Front upper and front lower torque strut mounts (A4351, A4352) |
This PHILTOP kit replaces the front upper and lower torque strut mounts on Nissan Rogue 2008–2013 and Rogue Select 2014–2015 2.5L models to restore engine support and reduce vibration. It is supplied as the two-piece torque strut set referenced to replacement numbers A4351 and A4352 and is described as built to OEM standards with rubber mounting type. In practice the parts are used when worn or broken mounts cause engine movement, vibration through the cabin, or transmission strain; installers will remove the failed mounts and bolt the new mounts in place. Customers report straightforward fitment on applicable Rogues and noticeably reduced vibration after installation. The kit’s strengths are clear fitment targeting and an affordable price, but buyers should note this is a basic rubber mount design rather than a performance or hydraulic style, and long-term durability may vary by driving conditions. Verify vehicle-year fitment before ordering to ensure compatibility with the Rogue 2.5L powertrain.
Best for: Budget-conscious Nissan Rogue owners who need a dependable, low-cost replacement to quiet vibration and restore engine stability for regular street use.
Less Ideal for: Drivers seeking high-performance or heavy-duty mounts for aggressive driving or towing should consider premium or specialized mounts instead.
- Targeted fitment for Nissan Rogue 2008–2013 and Rogue Select 2014–2015 2.5L which simplifies replacement.
- Rubber mounting construction that restores engine support and reduces cabin vibration for everyday driving.
- Sold as the specific front upper and lower torque strut set (A4351, A4352) so you get the parts needed for the common failure points.
- Affordable option compared with dealer replacements, making full mount replacement practical on a budget.
- Rubber-only mounts are a basic design and do not offer the damping performance of hydraulic or premium mounts.
- Limited information on long-term durability under heavy use or aggressive driving conditions.
Verdict A wallet-friendly, targeted replacement kit that restores engine stability on applicable Nissan Rogues but is a basic rubber mount best suited for everyday driving.
5. A-Premium 4‑Piece Engine and Transmission Mount Kit for Nissan Rogue (2014–2017)
| Vehicle fitment | Nissan Rogue 2014-2017 L4 2.5L (built in USA) |
|---|---|
| Package contents | Front right motor mount, rear torque strut, front right torque strut, transmission mount |
| Manufacturer | PremiumpartsWhosale |
| Part numbers referenced | A4363, A4364, A4366, A4367, EM7294, EM7204, EM7205, EM7295, 112204BA0A, 112206FL0B |
This A-Premium kit supplies the four mounts needed when replacing worn engine and transmission mounts on a Nissan Rogue (2014–2017, 2.5L). The set includes the front right motor mount, a rear torque strut, a front right torque strut, and a transmission mount so you can restore engine support and reduce vibration in one service job. The listing states the parts are tested and manufactured to meet or exceed factory-spec expectations and the included part numbers match common Rogue replacement references, which simplifies cross-checking. In practice the kit lets a mechanic or competent DIYer swap all major mounts at once, returning the engine to proper alignment and cutting down cabin shudder and drivetrain movement. Limitations are typical for aftermarket mount kits: fit and finish can vary between batches and long-term durability depends on installation and driving conditions. The seller also offers a one-year unlimited-mileage guarantee, which gives conservative buyers extra reassurance when choosing an aftermarket replacement kit.
Best for: Risk-averse mainstream buyers who prioritize restoring factory-like NVH (noise, vibration, harshness) and want a complete, single-purchase solution for a Nissan Rogue 2014–2017 service job.
Less Ideal for: Buyers seeking a short-term, cheapest possible replacement or those who prefer OEM-sourced parts from a dealer should consider alternatives.
- Complete four-piece set covers motor mounts, torque strut mounts, and transmission mount so you can replace all worn engine supports at once.
- Parts list and referenced part numbers match common Nissan Rogue replacement references for easier verification.
- Claimed testing and quality control aimed at meeting or exceeding factory-spec performance.
- One-year unlimited-mileage guarantee provides added confidence for risk-averse buyers.
- As an aftermarket kit, long-term durability may vary and is influenced by installation quality and driving conditions.
- Fit and finish can differ slightly between production batches, so verifying fit before installation is advised.
Verdict A convenient four-piece aftermarket kit that restores engine support and reduces vibration for Nissan Rogue 2014–2017 owners who want a full replacement with added warranty protection.
6. SHERXINBO Engine and Transmission Mount Set — Compatible with Nissan Rogue (Set of 4)
| Compatible models | Nissan Rogue 2008–2013; Rogue Select 2014–2015 AWD 2.5L |
|---|---|
| Unit count | 4 count |
| Set includes | Front upper torque strut, front right motor mount, rear lower torque strut, transmission mount |
This SHERXINBO kit supplies the four mounts you need to replace worn engine and transmission mounts on a Nissan Rogue 2.5L (2008–2013) or Rogue Select (2014–2015) AWD. The set includes front upper torque strut, front right motor mount, rear lower torque strut, and a transmission mount so you can refresh all major mounting points in one job. Buyers report the parts reduce vibration and restore smoother idle and highway feel, and the pack approach saves the hassle of sourcing individual pieces. Fitment is intended to match common Nissan part numbers listed in the product details, but some customers noted minor finish issues or weld seams that required light trimming during install. Installation generally needs basic tools and jack support for the engine; the transmission mount can be the trickiest to access. If you want a budget-friendly, complete replacement for a Rogue and accept occasional light fitment cleanup, this set is a practical option; if you need factory-exact finish or dealer-grade packaging you may prefer a factory-quality replacement instead.
Best for: Practical optimizers looking to fix vibration and drivetrain movement on a Nissan Rogue with a single, budget-conscious purchase and who prioritize getting a complete functional repair over dealer-level packaging.
Less Ideal for: Drivers who require exact factory-finish parts, certified dealer replacements, or who prefer to replace mounts one at a time based on individual wear patterns.
- Complete four-piece kit covers front upper, front right, rear lower torque strut and transmission mount for a full replacement job
- Intended fit for 2008–2013 Nissan Rogue and 2014–2015 Rogue Select AWD 2.5L so you can replace all mounts at once
- Multiple buyers report noticeable reduction in engine vibration and improved idle and driving smoothness
- Lower-cost aftermarket option compared with dealer parts while still matching common Nissan part numbers
- Some units show minor manufacturing finish issues or weld protrusions that may require light grinding or trimming for proper fit
- Not sold as a branded factory-quality part so long-term durability may vary between batches
Verdict A cost-effective complete mount kit for Nissan Rogue owners who want to eliminate vibration quickly, with occasional minor fitment cleanup possible.
7. Yllshengyu 3-Piece Engine & Transmission Mount Kit for Nissan Rogue (L4 2.5L)
| Compatibility | Nissan Rogue 2014-2020 L4 2.5L |
|---|---|
| Unit Count | 3-piece mount kit |
| Replaces Part Numbers | A4367, A4366, A4364, 9903, 9858, 9857 |
This Yllshengyu 3-piece mount kit replaces the right motor mount, right upper torque strut, and rear lower torque strut on Nissan Rogue models with the L4 2.5L hydraulic engine. It is supplied as a complete set to address common vibration and engine movement issues that occur when original mounts wear out. Buyers report straightforward, direct-fit installation with factory-aligned mounting holes, and the parts are engineered to match OEM fit and damping behavior so the engine feels more stable and idle vibration is noticeably reduced. The kit’s construction aims for durability and effective torque control, so it is suitable for daily-driven Rogues that need a reliable replacement without upsizing stiffness. Limitations include variability in long-term longevity compared with higher-end name-brand alternatives and the potential need for moderate installation effort or shop labor if access is tight. For a balanced buyer wanting a full replacement set that restores comfort and function at a reasonable value, this kit covers the core mounts needed for the Rogue’s 2.5L setup.
Best for: A balanced all-round buyer who wants a practical, full replacement to restore ride comfort and engine stability on a Nissan Rogue 2.5L without overpaying for premium aftermarket parts.
Less Ideal for: Drivers seeking the longest-lasting, top-tier performance mounts or those planning to change engine characteristics for performance tuning should consider higher-end alternatives.
- Complete three-piece kit covers the common mounts that fail on the Rogue 2.5L, avoiding piecemeal purchases.
- Direct-fit design that aligns with factory mounting points for straightforward installation.
- Engineered to control torque and reduce vibration, improving idle smoothness and cabin comfort.
- Includes parts intended to match OEM performance so daily driving and drivetrain behavior remain predictable.
- Not positioned as a premium brand so long-term durability may vary compared with higher-end aftermarket options.
- Installation can be moderately difficult in tight engine bays and may require professional tools or a mechanic.
Verdict A practical, full replacement mount kit that restores stability and reduces vibration on Nissan Rogue 2.5L models at a sensible value.
Choosing the Right Nissan Rogue Engine Mount: Key Factors to Consider
Fit and Bolt Pattern Compatibility
Accurate fit is essential because an engine mount must align the engine with the vehicle subframe and transmission. Even small deviations in bolt pattern or spacer thickness can cause misalignment, accelerate wear on driveline components, or complicate installation.
When fit is correct you reduce the need for shims or custom work, which simplifies installation and preserves factory geometry. Verify that mounting holes, stud lengths, and orientation match the Nissan Rogue application to avoid stress points that lead to premature failure.
Vibration Isolation
The primary job of an engine mount is to isolate engine vibrations from the chassis so the cabin remains comfortable. Different materials and internal designs absorb and transmit vibration differently; rubber compounds tend to damp low-frequency shake while hydraulic or fluid-filled mounts can better handle a wider range of frequencies.
Consider how the mount’s damping characteristics affect driving feel. A firmer mount can improve perceived responsiveness but may transmit more vibration, while a softer design improves comfort at the cost of slightly increased movement during acceleration.
Material and Construction Quality
Materials and build quality influence how long a mount lasts under heat, oil exposure, and mechanical stress. Reinforced rubber, bonded metal plates, and corrosion-resistant coatings help mounts survive long service intervals. Poorly bonded components or thin metal brackets are more likely to separate or deform.
Look for mounts with robust bonding between rubber and metal and corrosion protection on brackets. Construction choices affect not only longevity but also how the mount behaves under load and temperature cycles.
Load Capacity And Stiffness
Mounts are engineered to support engine weight and resist torque forces during acceleration and gear changes. A mount’s stiffness determines how much engine movement occurs under load. If stiffness is too low the engine may shift excessively, stressing hoses and alignment. If stiffness is too high the mount can transmit undue vibration.
Choose a mount with load ratings and stiffness appropriate for the engine variant in the Rogue. Consider whether you want a slightly firmer mount for towing or performance use, or a more compliant mount for daily comfort.
Installation Requirements
Some mounts are straightforward bolt-on replacements while others require engine support, special tools, or partial disassembly of nearby components. Accessibility of fasteners, required torque access, and whether the mount can be fitted with the engine held in place all affect labor time and complexity.
Assess what tools and mechanical access are necessary and whether you will tackle the job yourself or use a technician. Simpler installs reduce risk of improper torqueing and misalignment that can shorten mount life.
Durability Under Environmental Exposure
Engine mounts face engine bay heat, road salt, oil, and water spray. The mount compound and bracket finishes determine resistance to these conditions. Heat-resistant rubbers and protective coatings prevent premature cracking and corrosion, which are common failure modes.
Consider the typical climate and driving conditions where the Rogue will be used. In harsher environments prioritize mounts with proven resistance to oil soak, ozone, and temperature extremes to extend service life.
FAQ
What are common symptoms of a failing Nissan Rogue engine mount?
Common symptoms often include increased vibration felt in the cabin, clunking or banging during acceleration or when shifting, and visible engine movement at idle. These signs usually vary in severity depending on how degraded the mount is and the engine load.
Can I perform an engine mount replacement myself?
Many owners can replace a mount with basic mechanical skills and the right tools, but some mounts require engine support, specific torque access, or removal of nearby components. If you are unsure about supporting the engine or achieving correct torque, a professional installation is advisable.
How long do engine mounts typically last in a Nissan Rogue?
Mount life depends on driving conditions, exposure to oil and heat, and load cycles. They often last many years under normal driving but may degrade sooner with heavy use, frequent short trips, or exposure to contaminants. Regular inspection helps catch wear before it causes secondary damage.
Will replacing a bad mount eliminate vibration completely?
Replacing a worn mount usually reduces or eliminates engine-related vibration, but some vibration can originate from other sources like drivetrain imbalance, tire issues, or exhaust hangers. Addressing mounting points is an important step but may not resolve all vibration causes.
Are there installation torque specs I should be aware of?
Torque specifications vary by mount location and engine variant. It is important to follow the vehicle-specific torque values and tightening sequence to ensure correct clamp load and avoid overloading studs. If you do not have access to the specs, consult a repair manual or professional mechanic.
How do I tell if a mount is OEM or aftermarket quality?
Quality indicators include clear fitment data, material descriptions, bonded construction details, and corrosion protection. Documentation about load ratings or testing is also helpful. While OEM-equivalent parts often match factory fit and materials, some aftermarket options can meet or exceed those standards if they provide full specifications.
How We Chose the Best Nissan Rogue Engine Mount
We focused on mounts specifically designed to fit the Nissan Rogue and evaluated them against criteria that directly impact performance and longevity. Primary filters included precise OEM-equivalent fit and bolt pattern compatibility to ensure correct alignment with the engine and subframe. We also weighed vibration isolation measured by material and design, since effective damping reduces cabin noise and driveline harshness. Durability factors such as material composition, reinforcement, and expected service life guided selections for long-term reliability. Installation practicality was considered, including whether the mount requires special tools, torque access, or engine support during replacement. We excluded options lacking clear fitment data for the Nissan Rogue, mounts intended only for other vehicles, and ambiguous listings without material or mounting-spec details. The result is a list that prioritizes proper fit, reliable vibration control, robust construction, and realistic installability for typical owners and independent shops.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize fitment and vibration isolation when choosing a Nissan Rogue engine mount, since correct alignment and damping have the biggest impact on comfort and component longevity. Balance material quality and stiffness based on whether you value a softer ride or slightly firmer control under load. Also consider installation complexity and environmental durability to minimize future failures. Use the factors outlined above to match a mount to your driving habits and maintenance capabilities, and address related issues if vibration persists after replacement.
Explore More:
- Check out all Nissan Rogue parts & accessories
- Explore Engine
- Browse all Auto Parts
