Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a Subaru Crosstrek, worn or damaged control arms can undermine ride quality, steering precision, and tire wear. Choosing the right replacement control arm matters because it affects suspension geometry, bushing life, and how the vehicle tracks under load. This guide highlights seven shortlisted control arms selected for their fitment accuracy, material quality, and design features relevant to Crosstrek owners. You will find practical notes on the evaluation criteria that matter most for serviceability, longevity, and alignment stability. Read on to see which options made the list and why they passed our checks.
Looking for other parts? See all Subaru Crosstrek parts & accessories.
Top Picks at a Glance
| Best overall The best all-around choice for most situations | TRQ Front Lower Control Arm and Ball Joint Set, 2-Piece (fits Subaru Crosstrek) | ![]() |
| Best quality Built to a higher standard if you want something more solid | Whiteline Lower Control Arm KTA216A | ![]() |
| Best Value The sweet spot between price and what you get | TRQ Front Lower Control Arm with Ball Joint Set (2‑Piece) for Subaru Crosstrek | ![]() |
| Best Budget The cheapest option that still gets the job done reliably | POWERGEAR Front Right Lower Suspension Control Arm with Ball Joint Assembly | ![]() |
| Highest Rated A top-rated pick with lots of positive feedback | Detroit Axle Front Lower Control Arms with Ball Joints for Subaru Crosstrek | ![]() |
| Most popular A crowd favorite that many people choose with confidence | Detroit Axle Pair Rear Lower Control Arms, Adjustable Camber for Subaru Crosstrek | ![]() |
| Best Seller A high-volume bestseller chosen again and again | Detroit Axle 6‑Piece Front Control Arms Kit for Subaru Crosstrek and Forester | ![]() |
1. TRQ Front Lower Control Arm and Ball Joint Set, 2-Piece (fits Subaru Crosstrek)
| Fitment | Subaru Crosstrek 2018, 2019-2023 Base/Premium/Limited, 2021-2023 Sport |
|---|---|
| Quantity | 2 Piece |
| Material | Alloy Steel |
| Position | Front Lower |
| Exterior | Machined |
This TRQ kit replaces both front lower control arms with ball joints on compatible Subaru Crosstreks, delivering a straightforward repair for worn suspension components. Each arm arrives with the ball joint pre-installed to reduce installation time and align with factory mounting points, so a competent DIYer or a shop can swap both sides without fabrication. The parts are alloy steel with a machined exterior and TRQ supplies vehicle-specific fitment guidance and installation videos to simplify the job. In service the arms tighten up steering feel and reduce play from worn components, which helps with tire wear and ride stability. Some buyers report occasional issues with included hardware fitment or premature noise on a small number of units, so expect to verify castle nut fit and torquing during installation. If you want a near-direct replacement that improves front-end stability and is backed by clear installation support, this kit is a practical option; if absolute longest-term durability is the priority, consider comparing heavy-duty alternatives or professional installation inspection after fitment.
Best for: Risk-averse mainstream buyers who prioritize a direct, factory-quality replacement and want clear installation guidance to restore steering stability and ride comfort on their Crosstrek.
Less Ideal for: Enthusiasts seeking performance-tuned suspension upgrades or owners wanting the absolute highest-duty aftermarket arms for heavy off-road use should look at reinforced performance options instead.
- Direct-fit design for specified Subaru Crosstrek model years reduces modification and installation time
- Ball joints pre-assembled so replacement requires fewer steps than separate components
- Alloy steel construction and machined exterior for a robust, factory-replacement feel
- Includes both driver and passenger lower control arms so both sides are serviced at once
- Extensive installation resources and vehicle-specific fitment guidance from the manufacturer
- Some customers reported hardware fit issues requiring reuse of original nut or attention during cotter pin installation
- A few reports of early noise or premature failure on isolated units mean long-term life may vary
Verdict: A practical, near–factory replacement kit for Crosstrek owners who want an easy, reliable way to restore front-end stability without major modifications.
2. Whiteline Lower Control Arm KTA216A
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Lower |
| Material | Alloy Steel |
| Orientation | Front |
The Whiteline KTA216A lower control arm is a front, vehicle-specific replacement that restores proper suspension geometry and camber/caster range after wear or vehicle lowering. It installs like a direct-fit component and is typically used when correcting alignment or upgrading worn factory arms to regain handling precision. Made from alloy steel with a painted finish, the arm aims to match factory durability while offering the adjustability needed to return a Crosstrek to specification after spring or ride-height changes. In practice the part bolts in without modification on compatible Subaru models and gives enough adjustability for modest lowering while maintaining tight steering response. Limitations to consider are that this is a single arm sold per unit and it does not include bushings or hardware beyond the arm itself, so plan for an alignment and any needed fasteners during installation. Also professional installation is recommended for correct torque and alignment settings.
Best for: Performance-oriented buyers who prioritize handling precision and want a factory-quality replacement to restore alignment after lowering or wear.
Less Ideal for: Buyers seeking a full suspension refresh kit, those unwilling to budget for alignment and installation, or owners wanting parts that include all mounting hardware and bushings.
- Vehicle-specific front lower arm that fits without modification on compatible Subaru models
- Alloy steel construction and painted finish for corrosion resistance and durability
- Provides sufficient adjustment to recover factory alignment after lowering
- Direct-replacement form preserves steering geometry and handling character
- Sold as a single arm so a matching passenger or driver side purchase may be required
- Does not include additional hardware or replacement bushings in the package
- Not a complete suspension kit so an alignment is required after installation
Verdict: A durable, vehicle-specific lower control arm aimed at performance-minded owners who need a factory-quality replacement to restore alignment and handling after lowering or wear.
3. TRQ Front Lower Control Arm with Ball Joint Set (2‑Piece) for Subaru Crosstrek
| Fitment | Subaru Crosstrek (specified years/models) |
|---|---|
| Quantity | 2 Piece |
| Position | Front Lower |
| Exterior | Machined |
This TRQ two-piece front lower control arm kit replaces both left and right lower arms with integrated ball joints for Subaru Crosstrek model years listed in the fitment. It is intended as a direct-fit, factory-replacement style part so you can swap the worn arms without modifying mounting points. Typical use is to restore steering stability, reduce play, and correct uneven tire wear after original components wear out. Notable features include preassembled ball joints and vehicle-specific fitment, plus TRQ's helpful install videos for DIYers. In practice the arms bolt in cleanly and deliver tighter steering and improved turn stability on many installs, though long-term durability reports are mixed and some users note the ball joints are not serviceable for greasing. If you value convenience and a straightforward swap, this kit simplifies installation; expect to monitor ball joint condition over time and plan for replacement sooner on vehicles with heavy use or rough roads.
Best for: Buyers who prioritize convenience and a simple DIY replacement to restore steering feel and front-end stability on a Crosstrek without custom work.
Less Ideal for: Drivers who need a long-life, serviceable performance suspension part or those who drive aggressively or on rough roads where heavy-duty or greasable components are necessary.
- Vehicle-specific fitment for Subaru Crosstrek for straightforward, no-modify installation
- Comes as a two-piece kit so both front lower arms are replaced at once
- Preassembled ball joints save time during installation
- Provider includes install videos to help DIY mechanics complete the job
- Ball joints are not serviceable and lack grease fittings
- Mixed long-term durability reports; some users reported early failure
Verdict: A convenient, direct-fit lower control arm kit for Crosstrek owners who want an easy DIY replacement, but buyers should be aware the ball joints are not serviceable and longevity varies.
4. POWERGEAR Front Right Lower Suspension Control Arm with Ball Joint Assembly
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front Right Lower |
| Auto Part Orientation | Passengers Side |
| Material Type | Alloy Steel |
This POWERGEAR front right lower control arm with integrated ball joint is a budget-focused replacement for 2013–2017 Subaru Crosstrek passenger-side suspension. It is sold as a vehicle-specific fit and is intended to replace a worn or damaged lower control arm to restore steering stability and suspension geometry. The assembly is made from alloy steel and includes the ball joint housing so you do not need to reuse the old ball joint. The vendor describes the ball joint spindle design as aiding installation, which can make the swap quicker for a DIYer or a shop doing a single-arm replacement. Practical benefits are improved chassis stability and removal of clunking or uneven tire wear caused by a failing arm. Limitations are typical for budget aftermarket parts: long-term durability and finish may not match higher-end or factory-quality replacements and you should confirm exact fitment for your Crosstrek year and trim before installing.
Best for: Budget-conscious owners wanting an affordable direct replacement to restore steering feel and eliminate suspension noise on a 2013–2017 Subaru Crosstrek.
Less Ideal for: Drivers seeking the longest-lasting, premium OEM-level component or those restoring a vehicle to concours condition should consider higher-end or factory-quality control arms instead.
- Vehicle-specific fit for 2013–2017 Subaru Crosstrek front right lower position
- Includes ball joint housing so the assembly is ready to install
- Alloy steel construction for basic strength and corrosion resistance
- Designed to be a direct replacement to simplify installation
- Aftermarket budget part may not match factory-quality longevity or finish
Verdict: A wallet-friendly, ready-to-install replacement control arm for restoring front-right suspension function on 2013–2017 Subaru Crosstrek models.
5. Detroit Axle Front Lower Control Arms with Ball Joints for Subaru Crosstrek
| Fitment | Front Lower, Subaru Crosstrek (listed years) |
|---|---|
| Kit Includes | 2x Front Lower Control Arms with Ball Joint |
| Manufacturer | Detroit Axle |
| Position | Front Lower |
These Detroit Axle front lower control arms are a direct-style replacement intended to restore front suspension geometry and steering feel on compatible Subaru Crosstrek models. The kit includes both left and right lower control arms with ball joints already installed, which simplifies installation and reduces bench work. Built to meet aftermarket remanufactured standards, the arms are tested for impact and fatigue to provide long-term durability. In practice they bolt into the factory mounting points and are used during front-end suspension repairs or when worn arms cause looseness, uneven tire wear, or poor handling. Review feedback indicates consistent fit and solid build quality, though a small number of users have needed extra persuasion to seat joints during installation. These units do not include a grease fitting, so they are effectively maintenance-free but cannot be serviced at the ball joint. Expect to need an alignment after installation. For reliability-focused buyers seeking a factory-replacement style fix for the Crosstrek, these offer a practical balance of value and durability but lack field-serviceable ball joints.
Best for: A reliability-focused buyer who prioritizes restoring factory steering feel and long-term durability on their Crosstrek and prefers a ready-to-install, replacement-style suspension part.
Less Ideal for: Owners who want rebuildable or greasable ball joints for frequent heavy-duty use or those seeking performance-tuned suspension upgrades should consider other options.
- Comes as a complete pair with ball joints preinstalled for faster installation
- Engineered and tested for impact, wear, and fatigue to match everyday driving demands
- Direct-fit design that aligns with factory mounting locations for straightforward replacement
- Ball joints are not serviceable and lack a grease fitting
- Some installations may require extra force or pressing to fully seat a joint
Verdict: A dependable, ready-to-install pair of front lower control arms that restore factory steering feel on the Crosstrek but with non-serviceable ball joints.
6. Detroit Axle Pair Rear Lower Control Arms, Adjustable Camber for Subaru Crosstrek
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Rear Lower |
| Material | Alloy Steel |
| Adjustability | ±2° camber, 1.5° fixed toe |
These Detroit Axle rear lower control arms replace the factory rearward lower arms on Subaru Crosstrek models and provide an adjustable camber correction of plus or minus 2 degrees and a fixed toe of 1.5 degrees. They are supplied as a pair for driver and passenger sides and are intended to be used during suspension repair or alignment work after worn bushings or ball joints cause noise, looseness, or alignment drift. Built from alloy steel with a polished exterior, they come ready to bolt in and let a technician fine-tune rear camber to restore tire wear and handling. Practical benefits include simplifying a worn-arm repair by replacing the whole assembly rather than individual components and the ability to correct minor camber issues without additional aftermarket parts. Limitations to expect are that installation requires proper alignment afterward and the arms are an aftermarket replacement so fit and long-term durability can vary between vehicles and installers. They are best fitted and torqued by a shop familiar with Subaru suspension geometry.
Best for: Convenience-driven buyers who want a ready-made, vehicle-specific rear suspension replacement that minimizes shop time and lets a technician quickly restore alignment and handling.
Less Ideal for: Drivers seeking a direct factory-quality OEM replacement with guaranteed long-term parity or those who prefer to replace individual bushings and ball joints instead of whole arms.
- Vehicle-specific fit for Subaru Crosstrek rear lower control arm replacement
- Adjustable camber capability (±2 degrees) to correct alignment and uneven tire wear
- Supplied as a pair for both driver and passenger sides to simplify repairs
- Alloy steel construction intended to meet common durability expectations
- Aftermarket part so long-term durability and fit can differ from factory parts
- Requires professional installation and a wheel alignment after fitting
Verdict: A convenient, adjustable rear lower control arm pair for Subaru Crosstrek that speeds up repairs and lets a shop correct camber without extra parts.
7. Detroit Axle 6‑Piece Front Control Arms Kit for Subaru Crosstrek and Forester
| Fitment | 2018-2024 Subaru Crosstrek (2.0L) and 2022-2024 Forester |
|---|---|
| Kit contents | 2 front lower control arms w/ ball joints, 2 outer tie rod ends, 2 sway bar end links |
| Manufacturer | Detroit Axle |
| Position | Front Lower |
| Model | Control Arms Kit |
This Detroit Axle 6‑piece front control arms kit supplies two front lower control arms with ball joints, two outer tie rod ends, and two sway bar end links to restore steering and suspension geometry on compatible Subaru Crosstrek and Forester models. It is intended as a direct replacement for worn front lower suspension components and is typically used when front-end play, uneven tire wear, or clunking develop. The components arrive with pressed bushings and ball joints designed to simplify installation and reduce shop time. Buyers report generally good fit and acceptable build quality for a budget aftermarket kit, and the included pieces mean you can replace several failure points at once instead of buying parts separately. Some customers noted inconsistent hardware and missing grease fittings on a minority of units, and long-term durability depends on driving conditions and maintenance. The kit is backed by a long warranty from the maker but some warranty claims require customer-paid shipping for returns, which affects real-world convenience.
Best for: Risk-averse mainstream buyers who prioritize restoring safe, factory-like steering feel with a ready-made replacement kit rather than sourcing individual parts.
Less Ideal for: Drivers seeking high-performance suspension upgrades or long-term heavy-duty use should consider reinforced or performance-specific control arms made for those purposes.
- Complete kit replaces multiple front suspension components in one purchase
- Pressed-in bushings and preassembled ball joints speed installation
- Generally good fit for Subaru Crosstrek/Forester applications based on user reports
- Includes commonly failing parts so you can correct related steering and wear issues in one job
- Some units ship with missing or mismatched hardware and absent grease fittings on a minority of parts
- Quality and rubber longevity vary with heavy use and severe conditions
Verdict: A budget-friendly, all-in-one front suspension kit that restores steering and corrects multiple common wear items on compatible Subaru Crosstrek and Forester models.
Choosing the Right Subaru Crosstrek Control Arm: Key Factors to Consider
Fitment and Mounting Accuracy
Correct fitment is the single most important factor because the arm must match the factory mounting points and bushing orientation on the Subaru Crosstrek. An arm that deviates in hole spacing, bracket orientation, or bushing offset can alter suspension geometry, making alignment difficult or impossible to correct without additional modifications.
Check whether part numbers and mounting templates align with vehicle-year specifics, and prefer designs that retain original-style mounting hardware. Accurate fitment reduces installation time and lowers the risk of introducing new handling issues after replacement.
Bushing Material and Construction
Bushing quality determines vibration isolation, noise control, and long-term durability. Rubber bushings typically provide quieter operation and better absorption of road shocks, while polyurethane options can deliver firmer response and longer service life but may transmit more noise and vibration.
Consider how the bushing is bonded and whether it is replaceable. Look for sealed, corrosion-resistant housings that protect the bushing from salt and debris to reduce premature control arm bushing wear.
Ball Joint Integration and Serviceability
Some control arms include an integrated ball joint, while others use a separate serviceable joint. An integrated ball joint can simplify procurement and ensure factory-matched geometry, but it may require full-arm replacement when the joint fails. Serviceable ball joints allow targeted repairs and can be cost-effective over time.
Inspect the ball joint boot design and the available replacement options. Durable boots and robust joint construction reduce the frequency of service and help maintain consistent steering feel.
Material Strength and Corrosion Resistance
Control arms must resist bending and fatigue from repeated loads. Common constructions include stamped steel, forged steel, and cast aluminum, each with tradeoffs in weight, stiffness, and durability. Stamped steel can be strong and economical, forged parts often offer superior fatigue resistance, and aluminum reduces unsprung mass but may require careful design to avoid stress concentration.
Coatings, plating, and drainage provisions matter for long-term survival in wet or salty climates. Choose arms with protective finishes and corrosion-resistant fasteners to extend service life.
Impact on Alignment and Steering Geometry
A replacement control arm directly affects toe, camber, and caster settings once installed. Even small differences in arm length or bushing offset can shift alignment values, leading to uneven tire wear or steering pull. Arms designed to maintain OEM geometry help technicians achieve correct alignment more quickly.
Consider how the arm interfaces with alignment adjustments and whether it allows fine tuning without requiring additional components. Parts that preserve factory geometry minimize the need for further suspension changes.
Ease of Installation and Replacement
Practical serviceability influences labor time and overall ownership experience. Arms with accessible fastener locations, common bolt sizes, and clear installation orientation reduce shop time. Features such as preinstalled bushings or ball joints can speed up installation, while designs that require pressing in bushings increase complexity.
Also consider whether the arm preserves original hardware or requires special tools. Simpler installation lowers the chance of incorrect fitment and reduces the margin for error during a control arm replacement.
How We Chose the Best Subaru Crosstrek Control Arm
We focused on components that directly affect suspension geometry and safety for the Subaru Crosstrek. Primary evaluation criteria included fitment accuracy to factory mounting points and control arm part numbers, bushing material and construction to gauge likely longevity, the presence and quality of ball joint assemblies where applicable, and overall structural design for resistance to corrosion and fatigue. We also considered ease of control arm installation, including accessible mounting designs and whether common hardware is retained. Durability under typical road and weather conditions and how the arm influences alignment stability were key performance filters. Exclusions included components that do not match Crosstrek-specific mounting patterns, items lacking clear material or manufacturing information, and parts intended solely for racing without practical road-use features. The resulting shortlist emphasizes parts that balance correct fitment, reliable bushings, and straightforward installation for everyday driving.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common control arm symptoms I might notice on a Subaru Crosstrek?
Common signs include uneven tire wear, a pulling sensation under braking or acceleration, excessive vibration through the steering wheel, and clunking noises over bumps. You may also notice loose or vague steering feel. These symptoms often point to worn bushings or ball joints but can overlap with other suspension issues.
How can I tell if a control arm is bad without removing it?
A visual inspection can reveal torn or degraded bushings, rusted or bent metal, and leaking or damaged ball joint boots. With the vehicle safely lifted, you can check for excessive play by prying on the wheel while observing movement at the joint and bushing areas. Significant movement or visible damage usually indicates replacement is needed.
Will replacing a control arm fix alignment issues on the Crosstrek?
Replacing a worn or damaged control arm often improves alignment because it restores proper bushing location and arm geometry. However, an alignment check and adjustment after installation are usually necessary, since new parts can change toe and camber settings. Other suspension components may also influence alignment, so a full inspection is advisable.
Are there differences between upper control arm vs lower control arm that I should know?
Upper and lower control arms serve distinct roles in locating the wheel and defining steering geometry. Upper arms usually control camber at the top of the knuckle, while lower arms take greater loads and often house ball joints. The design, load path, and service considerations differ, so identify which arm shows wear before ordering a replacement.
How long do control arm bushings typically last on a Crosstrek?
Bushing life depends on materials, road conditions, and driving style. Rubber bushings on regularly driven vehicles often last many years under normal conditions, while polyurethane or heavy-duty bushings may outlast rubber but can transmit more noise. Inspect bushings periodically for cracking, separation, or excessive movement to gauge remaining life.
Does installation require special tools or professional service?
Some control arm installations are straightforward with common hand tools, especially if the replacement includes preinstalled bushings and joints. Pressing out old bushings, dealing with seized fasteners, or aligning suspension geometry may require specialty tools or professional service. If you are unsure, consult a technician to avoid damage or incorrect installation.
Conclusion
When replacing a Subaru Crosstrek control arm, prioritize accurate fitment to factory mounting points, durable bushing construction, and the quality of any integrated ball joint. Balance material strength and corrosion protection with serviceability so you get a part that preserves steering geometry and resists premature wear.After installation, plan for a proper alignment check and a quick road test to confirm steering feel and tire wear patterns. Focusing on the criteria above will help you choose a replacement that restores handling and reduces the chance of repeat labor.
Explore More:
- Check out all Subaru Crosstrek parts & accessories
- Explore Control Arms Maintenance & Repair Guides
- Explore Suspension & Steering
- Browse all Auto Parts






