Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you want extra ground clearance, better approach angles, or space for larger tires on your 2018-2023 Subaru Crosstrek, a dedicated lift kit is the fastest way to get there. The right lift changes how the Crosstrek handles rough roads, snow, and light off-road trails, so picking the correct kit for your driving priorities matters.This guide shortlists the top lift kit options for the 2018-2023 Crosstrek and explains how we evaluated ride quality, fitment, and installation considerations. Read on to compare the strengths of each approach and find the lift that matches your driving style and budget.
Looking for other parts? See all Subaru Crosstrek parts & accessories.
Top Picks at a Glance
| Best Overall Lift Kit The top all-around choice balancing performance, fit, and reliability | ReadyLIFT 69-98200 2.0" SST Lift Kit with End Links for Subaru Crosstrek |  |
| Best Budget Lift Kit A low-cost option that raises height without breaking the bank | Protune Suspension Steel Front 2" / Rear 1.5" Lift Kit for Subaru Crosstrek (2018–2023) |  |
| Best Premium Lift Kit Higher-end components and tuning for the best ride and longevity | Rough Country 2" Lift Kit with N3 Struts for 2018–2024 Subaru Crosstrek 4WD |  |
| Best Complete Lift Kit Includes all necessary components for a full, drop-in suspension upgrade | Tema4x4 30mm Complete Lift Kit with Polyurethane Strut Spacers |  |
| Best 2-Inch Lift Kit A specific-height kit for modest clearance and minimal geometry changes | Rough Country 2" Lift Kit for 2018–2020 Subaru Crosstrek 4WD |  |
| Best Bolt-On Lift Kit Easy-to-install kits that require no cutting or complex fabrication | DAYSTAR 2" Suspension Lift Kit for 2018-2019 Subaru Crosstrek |  |
| Best Coilover Lift Kit Adjustable coilover-style kits that tune ride height and damping | maXpeedingrods T6 Adjustable Coilover Kit for Subaru Crosstrek 2018–2023 |  |
1. ReadyLIFT 69-98200 2.0" SST Lift Kit with End Links for Subaru Crosstrek
Best Overall Lift Kit
| Maximum Lifting Height | 2 Inches front / 1.5 Inches rear |
|---|---|
| Automotive Fit Type | Vehicle Specific Fit |
| Material Type | Alloy Steel |
This ReadyLIFT kit is a vehicle-specific lift package for the 2018–2024 Subaru Crosstrek that raises the front 2.0" and the rear 1.5" using SST offset spacers and includes front sway bar end links. It is installed as a bolt-on solution that keeps factory camber and caster geometry, so alignment remains straightforward after fitting. The kit is geared toward owners who want a modest, durable lift without changing the vehicle ride characteristics; the manufacturer says it preserves the factory ride while providing extra clearance to run up to a 215/75-15 tire without trimming and up to 235/75-15 with minor plastic trimming. Construction uses alloy steel spacers designed for durability and the included end links relocate the sway bar attachments to maintain proper angles. The main limitations are its modest lift height compared with full suspension kits and the need for minor trimming if you go to larger tires; it also only addresses ride height and not shocks or springs, so pairing with compatible dampers may be necessary for heavier off-road use.
Best for: Crosstrek owners who want a simple, factory-friendly lift that improves ground clearance and stance while keeping the stock ride quality and offering a straightforward DIY installation.
Less Ideal for: Drivers seeking a large suspension overhaul, major off-road capability, or those who want a complete shock-and-spring upgrade in a single package should consider other kits.
- Vehicle-specific design preserves factory camber and caster for easier alignment
- Bolt-on offset spacers allow installation in roughly half the time of more involved kits
- Includes front sway bar end links to maintain correct suspension geometry
- Alloy steel construction aimed at long-term durability
- Does not include upgraded shocks or springs, so dampers may need to be replaced for more demanding use
- Larger 235/75-15 tires require minor plastic trimming to avoid rubbing
Verdict: The best all-around lift kit that balances ride quality, durability, ease of installation, and value for most DIY mechanics.
2. Protune Suspension Steel Front 2" / Rear 1.5" Lift Kit for Subaru Crosstrek (2018–2023)
Best Budget Lift Kit
| Automotive Fit Type | Vehicle Specific Fit |
|---|---|
| Material Type | Steel |
| Maximum Lifting Height | 2 inches |
| Included Components | sway bar |
This Protune Suspension lift kit uses steel spacers to give a 2018–2023 Subaru Crosstrek an immediate 2 inch front and 1.5 inch rear lift through a bolt-on installation. The package includes front and rear lift spacers plus sway bar end links and mounting brackets so you can keep the factory-style sway bar geometry. Installation is straightforward for anyone comfortable with spring disassembly or a shop with basic suspension tools, and the seller supplies a digital PDF install guide. Because the spacers are solid 1/4 inch steel with a powder coat, durability and resistance to corrosion are strong selling points for light off-road use and rough roads. The kit is designed to preserve the factory ride quality rather than changing spring rates or damping, which makes it a simple way to gain clearance without a harsh ride. Limitations are that it is a spacer-style lift only—there are no upgraded shocks or springs—so extreme off-road loads or larger tire fitment beyond the suggested sizes may require additional suspension or alignment work.
Best for: Buyers who want the most affordable, durable way to add modest ground clearance to a Crosstrek while keeping the stock ride feel and avoiding major suspension changes.
Less Ideal for: Drivers planning heavy-duty off-road use, significant suspension travel increases, or fitting much larger tires should consider complete suspension kits with new springs and shocks instead.
- Bolt-on steel spacer design for quick installation without cutting or welding
- Includes sway bar end links and brackets to maintain factory sway bar geometry
- Powder-coated 1/4" steel construction improves durability and corrosion resistance
- Designed to retain factory ride comfort while providing modest lift
- Does not include upgraded shocks or springs so heavy off-road use may require further suspension components
Verdict: The best budget lift kit for buyers who want a reliable height increase and acceptable performance at the lowest reasonable price.
3. Rough Country 2" Lift Kit with N3 Struts for 2018–2024 Subaru Crosstrek 4WD
Best Premium Lift Kit
| Maximum Lifting Height | 2 Inches |
|---|---|
| Material | Alloy Steel |
| Automotive Fit Type | Vehicle Specific Fit |
| Included Components | Lift Kit |
| Construction | Drilling Required: No |
This Rough Country kit replaces the Crosstrek front struts with lifted N3 struts to raise the vehicle two inches and level the stance from front to rear. It is intended for buyers who want a modest lift to fit larger tires and gain extra ground clearance without extensive suspension modification. Installation is designed to be straightforward with no drilling and minimal strut disassembly, though light trimming is noted and professional installation is recommended for safe alignment and driveline checks. The N3 struts mean the lift is integrated rather than spacer-based, which preserves a more controlled ride compared with basic spacer kits. Practical benefits include a more aggressive look, the ability to run larger tires, and Rough Country's lifetime replacement guarantee for long-term coverage. Limitations are the modest 2-inch height that only provides limited off-road articulation benefits and the kit is vehicle-specific so it is only suitable for the Crosstrek 4WD fitment listed.
Best for: Buyers who prioritize a refined, factory-style lift that improves ground clearance and appearance while keeping ride comfort and durability in mind.
Less Ideal for: Drivers seeking major suspension travel increases, heavy off-road modification, or lifts taller than a modest 2 inches should consider more aggressive suspension systems.
- Integrated N3 struts provide a cleaner lift than simple spacer kits and help maintain ride quality
- Vehicle-specific fitment for 2018–2024 Crosstrek 4WD simplifies selection and installation
- No drilling required and designed for relatively straightforward installation
- Allows running larger tires and adds useful ground clearance for light off-road use
- Backed by a lifetime replacement guarantee for long-term support
- Maximum lift is only 2 inches, limiting extreme off-road capability or large suspension travel upgrades
Verdict: The best premium lift kit for buyers willing to pay more for superior materials, refined damping, and long-term durability.
4. Tema4x4 30mm Complete Lift Kit with Polyurethane Strut Spacers
Best Complete Lift Kit
| Lift height | 30mm |
|---|---|
| Included components | strut spacers |
| Material type | Polyurethane |
| Auto part position | Front, Rear |
This kit raises a compatible Subaru model by 30mm using polyurethane strut spacers designed for front and rear installation. It is a single-package, bolt-on approach aimed at simple lift needs rather than a full suspension overhaul. Installation is typically done by removing the strut top, inserting the spacer, and reassembling the strut assembly, so a DIYer with basic tools and mechanical familiarity can fit it in a garage. The polyurethane spacers are durable and resist compression better than cheaper plastics, so the lift stays consistent under light off-road use and curb encounters. The kit improves clearance for snow, dirt, and taller curb approaches and can help accommodate slightly larger wheels and tires. Limitations are that this is a spacer-style lift only; it does not include springs, shocks, alignment hardware, or components that correct geometry, so heavier off-road use or larger tire upgrades may require additional suspension upgrades and an alignment after installation.
Best for: DIY-minded Crosstrek owners looking for a single, easy-to-install spacer kit to raise clearance for light off-road use and improved curb approach without replacing the entire suspension.
Less Ideal for: Drivers planning heavy-duty off-road use, significant tire upgrades, or those who want a complete spring-and-shock suspension package should consider a full lift system instead.
- Adds a straightforward 30mm of lift to improve ground clearance and curb approach
- Polyurethane construction is more durable and resists compression compared with basic plastics
- Bolt-on strut spacer format keeps installation fairly simple for experienced DIYers
- Designed for both front and rear positions so the lift is consistent across the vehicle
- Does not include springs, shocks, or alignment components required for correcting suspension geometry under larger lifts
Verdict: The best complete lift kit for DIYers who want a single-package solution that covers springs, shocks, hardware, and alignment components.
5. Rough Country 2" Lift Kit for 2018–2020 Subaru Crosstrek 4WD
Best 2-Inch Lift Kit
| Included Components | Front Strut Extensions, Front Sway Bar Brackets, Rear Strut Extensions |
|---|---|
| Material Type | Alloy Steel |
| Automotive Fit Type | Vehicle Specific Fit |
| Maximum Lifting Height | 2 Inches |
This Rough Country kit provides a modest 2-inch lift for 2018–2020 Subaru Crosstrek 4WD using front and rear strut spacers plus front sway bar brackets. It is intended to level the Crosstrek, improve ground clearance, and allow slightly larger tires without major suspension disassembly. The kit’s laser-cut alloy steel spacers are powder coated for corrosion resistance and the design lets most installers avoid taking the struts apart, which speeds installation and lowers labor complexity. Practical benefits include a more aggressive stance, extra clearance for light off-road use, and a factory-friendly ride feel since the geometry is changed only minimally. Important limits are that the lift is modest and not meant for heavy-duty off-road use, it may require a professional for safe installation and post-install checks, and alignment and periodic bolt checks are recommended after installation.
Best for: Buyers who want a modest, easy-to-install height increase to level their Crosstrek and gain clearance for slightly larger tires while keeping the factory ride quality and minimal suspension changes.
Less Ideal for: Drivers planning heavy off-road use, large oversized tires, or large suspension modifications should choose a more robust long-travel or full suspension kit instead.
- Vehicle-specific fit for 2018–2020 Crosstrek 4WD simplifies fitment
- Uses laser-cut alloy steel spacers for precise alignment
- Powder coated finish resists corrosion
- Installs without full strut disassembly for easier installation
- Provides a modest 2-inch lift that allows slightly larger tires and improved ground clearance
- Lift height is limited to 2 inches and not suitable for serious off-road builds
- Installation and safe operation require experienced installation and follow-up inspections
Verdict: The best 2-inch lift kit for buyers seeking a modest, widely compatible ride-height increase with minimal trimming or suspension rework.
6. DAYSTAR 2" Suspension Lift Kit for 2018-2019 Subaru Crosstrek
Best Bolt-On Lift Kit
| Auto Part Position | Front, Rear |
|---|---|
| Material | Polyurethane (PU) |
| Included Components | Suspension Leveling Kit |
| Maximum Lifting Height | 2 Inches |
| Automotive Fit Type | Vehicle Specific Fit |
This Daystar 2-inch lift kit raises a 2018-2019 Subaru Crosstrek to clear larger tires and gain extra ground clearance while keeping the factory suspension geometry intact. Installation is fully bolt-on and designed to use existing mounting points, so you do not need to disassemble the struts or drill new holes. The kit's polyurethane coil spacers resist corrosion and metal-on-metal contact, which reduces squeaks and improves long-term fit compared with simple metal adapters. In everyday use it gives room for up to 29-inch tires on stock wheels and a modest height boost useful for light off-road trails or improved traction in snow. Limitations include the modest 2-inch lift, which is not enough for heavy-duty rock crawling, and it does not replace shocks or springs, so vehicle handling and ride quality remain largely factory-spec and may require alignment after fitting.
Best for: DIY-minded Crosstrek owners who want a straightforward, no-drill lift that installs with basic tools and existing mounting points for light off-road use or improved clearance in poor weather.
Less Ideal for: Drivers seeking large lifts, serious off-road capability, or a complete suspension overhaul with new shocks and springs should look at full suspension kits instead.
- True bolt-on design with no drilling and no strut disassembly required
- Polyurethane spacers resist corrosion and reduce metal-on-metal noise
- Provides 2 inches of lift to clear up to 29-inch tires on stock wheels
- Vehicle-specific fit for 2018-2019 Crosstrek simplifies installation and fitment
- Lift is limited to 2 inches so it is not suitable for major off-road modifications or large tire builds
- Does not include upgraded shocks or springs so damping and ride height control remain stock
Verdict: The best bolt-on lift kit for DIY mechanics who prioritize straightforward installation using existing mounting points and basic tools.
7. maXpeedingrods T6 Adjustable Coilover Kit for Subaru Crosstrek 2018–2023
Best Coilover Lift Kit
| Compatible models | Subaru Crosstrek/XV 2018-2023 |
|---|---|
| Damping adjustment | 24 levels |
| Height adjustment | Threaded 1–3 inches |
| Material type | Aluminum |
| Spring rate (front/rear) | 6 kg/mm front, 5 kg/mm rear |
This maXpeedingrods T6 coilover kit replaces the factory suspension on a 2018–2023 Subaru Crosstrek and provides threaded ride-height adjustment plus 24 levels of damping control. It is aimed at drivers who want to lower or raise stance by up to roughly 1–3 inches while tuning rebound/compression via the damper knob for street, mountain, or track settings. The kit uses aluminum components, high-tensile springs with specified spring rates for front and rear, and a stepped damping range to dial in comfort versus responsiveness. In practice you can firm the setup for tighter cornering or soften it for everyday comfort; the height adjuster also helps reduce body roll and improves steering feedback when lowered. Important limitations: the listing is vehicle-specific so fitment is limited to the Crosstrek/XV years shown, and the adjustability requires basic suspension knowledge and alignment after installation. Also the product has minimal public review data, so long-term durability and fitment nuances may be unclear before purchase.
Best for: Buyers who want to control ride height and handling with a tunable coilover tailored for the 2018–2023 Crosstrek and who are comfortable setting damping and arranging alignment.
Less Ideal for: Drivers who prefer a simple bolt-in replacement with factory ride height or who do not want to perform or pay for alignment and suspension tuning after installation.
- Vehicle-specific fitment for 2018–2023 Subaru Crosstrek/XV simplifies installation planning
- 24-level damper adjustment lets you tune comfort versus performance on the fly
- Threaded height adjustment provides 1–3 inches of ride-height change for stance and handling
- Aluminum components and high-tensile springs designed for repeated use and improved steering response
- Requires post-installation wheel alignment and some suspension knowledge to dial in settings properly
- Limited public review history makes long-term reliability and real-world fitment less certain
Verdict: The best coilover lift kit for buyers who want adjustable ride height and improved handling through tunable springs and dampers.
Choosing the Right 2018-2023 Subaru Crosstrek Lift Kit: Key Factors to Consider
Lift Height and Intended Use
The amount of lift determines what you can do with the Crosstrek. A modest 1 to 1.5 inch lift mainly helps with minor obstacles, snow clearance, and fitting slightly larger tires without dramatically changing handling. Taller lifts, commonly 2 inches or more, increase approach and departure angles and make room for much larger tires, but they also amplify suspension geometry changes.
Decide the primary use first. If you plan light trail work and occasional dirt roads, a small lift keeps ride quality close to stock. If you want significant off-road capability or a very aggressive look, accept that taller lifts will usually require upgraded shocks, alignment tweaks, and possibly modifications to maintain safe handling.
Suspension Type and Components
Lift kits vary by approach: spacer-style lift blocks, coil spring spacers, replacement coil springs, or full suspension component kits that include shocks and control arms. Spacer-style options can be cost-effective and easier to install, but they may alter suspension geometry and transfer more stress to other components.
Upgraded springs or a full suspension kit typically provide a more balanced outcome because they are engineered to restore spring rates and ride height together. Consider whether the kit includes or requires compatible dampers. Kits that pair springs with matching shock absorbers tend to give the most predictable ride and handling on the Crosstrek.
Tire Clearance and Wheel Fitment
One common reason for lifting the Crosstrek is to run larger tires. Check the maximum tire diameter and width the kit supports, and account for wheel offset and backspacing. Lifting the vehicle without addressing wheel fitment can lead to rubbing on fenders or suspension components during full steering lock or compression.
Plan for the full package: lift height plus wheel/tire dimensions. Some owners also trim inner fender liners or perform minor bodywork to clear aggressive tires. Make sure the kit documentation specifies compatible tire sizes or offers guidance on needed wheel offsets to avoid surprises after installation.
Impact on Handling and Ride Quality
Raising the ride height changes center of gravity and can affect body roll, steering feel, and ride compliance. Small lifts often preserve much of the factory behavior, while larger lifts tend to increase body roll and can make the suspension feel less composed unless the dampers and bushings are upgraded.
Think about everyday drivability. If you commute frequently, prioritize kits that are tested to maintain on-road comfort. For more aggressive off-road setups, expect tradeoffs and consider complementary components such as upgraded sway bar links or stiffer anti-roll bars to manage body motion.
Installation Complexity and Maintenance
Installation ranges from simple bolt-on spacer kits that a competent DIYer can tackle in a weekend to full suspension replacements that may require a professional shop and alignment. Factor in whether the kit requires spring compressors, new shocks, extended brake lines, or drivetrain adjustments.
Also consider long-term maintenance. After lifting, regular inspections of suspension bushings, ball joints, and tie rod ends become more important. Some kits change service intervals for certain components or affect the complexity of future repairs, so choose an option that fits your willingness to maintain the vehicle.
Legal and Warranty Considerations
Altering ride height can have implications for local vehicle regulations and may affect dealer warranty coverage in some circumstances. Verify local laws on vehicle modifications, especially if the lift changes bumper or headlight heights beyond permissible limits.
Check how the lift may interact with any remaining factory warranties and whether the vendor provides documentation or support for professional installation. Responsible owners keep records of installations and any supporting paperwork that clarifies manufacturer or installer responsibilities.
Understanding Lift Options for the Crosstrek
Lift solutions for the Crosstrek come in several forms, each suited to different goals. Spacer kits add height under existing springs or struts and are often the simplest route. Replacement springs or coils change the suspension geometry more fundamentally and are usually paired with new dampers to retain handling balance.
Full suspension kits are the most comprehensive, replacing springs, shocks, and sometimes additional hardware to maintain alignment and articulation. Choose based on whether you prioritize cost, ride quality, or maximum capability.
- Spacer kits: easy to install, may shift suspension loads
- Replacement springs: better matched spring rates, often need new shocks
- Full kits: restore geometry, require more involved installation
Preparing Your Crosstrek for a Lift
Before installing a lift, perform a thorough pre-check: inspect suspension bushings, ball joints, and wheel bearings for wear. Replacing worn components before lifting prevents accelerated failure after the added loads from increased ride height.
Gather necessary tools and parts, including a quality alignment after installation. If the kit requires extended brake lines or sway bar links, have those components ready to avoid installation delays.
- Inspect and replace worn suspension parts
- Have alignment planned for post-install
- Confirm required additional hardware is available
Installation Considerations and Typical Steps
Installation steps vary by kit but commonly include safely lifting the vehicle, removing wheels, disassembling strut or spring assemblies, and fitting spacers or replacement springs. Torque specifications and correct spring orientation are critical for safety and performance.
Many installations require an alignment and sometimes minor trim work for clearance. If you are not confident with spring compressors or strut assemblies, plan for professional installation to avoid safety risks.
- Follow manufacturer torque specs and procedures
- Expect a post-install alignment
- Professional installation recommended for complex kits
How a Lift Affects Off-Road Capability
A properly chosen lift increases approach, departure, and breakover angles, improving the Crosstrek's ability to navigate obstacles. Increased clearance reduces the chance of underbody contact on rocky or rutted trails.
However, lifts do not substitute for proper tires, skid protection, or driver technique. Combine a lift with suitable tires and consider skid plates for frequent off-road use to protect vulnerable components.
- Improves clearance and obstacle negotiation
- Pair with appropriate tires for traction gains
- Consider additional protective hardware for frequent off-road use
Matching Tires and Wheels After a Lift
Once you increase ride height, you can explore larger diameter tires or more aggressive tread patterns. Consider the tradeoffs: larger tires increase unsprung weight and rolling resistance, which can slightly reduce fuel economy and change acceleration response.
Wheel offset and backspacing often need adjustment to keep tires centered and avoid rubbing. Plan wheel and tire upgrades in tandem with the lift to ensure a cohesive setup that meets your clearance and handling goals.
- Larger tires can impact fuel economy and handling
- Adjust wheel offset to prevent rubbing
- Balance tire selection between traction and on-road noise
Budgeting for Parts, Labor, and Alignment
Costs vary by kit complexity. Spacer kits tend to be the lowest-cost option with minimal labor, while full suspension kits and shock replacements increase parts and installation expenses. Labor time also increases for kits that require spring compressors and teardown of the front struts.
Factor in alignment costs, any needed extended brake lines or sway bar end links, and potential additional hardware to fit larger tires. Allow for follow-up inspections after the first few hundred miles to confirm fasteners remain torqued and components are settling correctly.
- Include alignment and potential additional hardware in your budget
- Expect higher labor for full suspension replacements
- Plan for a post-install inspection after initial break-in miles
Still looking for the perfect fit?
Select your Subaru Crosstrek configuration to see the most relevant Lift Kits recommendations
How We Chose the Best 2018-2023 Subaru Crosstrek Lift Kit
We prioritized lift kits that provide reliable fitment for the 2018-2023 Subaru Crosstrek and that address the vehicle's common use cases: light off-road, snow clearance, and daily driving with larger tires. Our evaluation criteria focused on measurable, owner-relevant attributes rather than marketing claims. Key criteria included compatibility and fit verification for the specified model years, impact on alignment and suspension geometry, and the range of lift heights offered.We also weighed ride quality and handling effects, assessing whether a kit preserves predictable on-road manners while adding clearance. Durability and corrosion protection were considered, with emphasis on materials and coatings suitable for varied climates. Installation complexity and whether the kit requires additional components such as extended brake lines, alignment, or new shocks were factored in. Finally, we screened out solutions that lack documented fitment for the 2018-2023 Crosstrek, require extensive chassis modification, or compromise critical vehicle systems. The result is a curated list of seven options that meet those filters and represent practical choices for Crosstrek owners.
Our full evaluation process is outlined in our review methodology.
FAQ
Can I install a lift kit on my Crosstrek myself?
It depends on the kit and your mechanical experience. Spacer kits are often within the reach of competent DIYers with jack stands and basic tools, but kits that require spring compressors or strut disassembly are best handled by a professional for safety and correct setup.
How does a lift affect wheel alignment and tire wear?
Lifting changes suspension geometry, which typically necessitates a full alignment. Without proper alignment, you may see accelerated or uneven tire wear. Plan for a shop alignment immediately after installation.
Will lifting my Crosstrek allow me to fit much larger tires?
Lifting increases available clearance, but actual tire fitment also depends on wheel offset, backspacing, and fender clearance. Some lifts accommodate modest increases in tire size without trimming, while larger tires may require additional clearance work.
Are spacer-style lifts bad for ride quality?
Spacer lifts can be effective and economical, but they may alter suspension geometry and increase stress on other components. Ride quality impact varies by height and the condition of existing springs and dampers; pairing spacers with upgraded shocks can mitigate negative effects.
Do I need new shock absorbers when installing a lift?
Often yes for larger lifts. Small lifts may work with factory dampers for a time, but replacement shocks matched to the new ride height provide better damping and help maintain predictable handling, especially if you increase tire size or carry extra load.
Will a lift change my vehicle's center of gravity and handling?
Yes. Raising ride height increases center of gravity, which can lead to more body roll and altered handling dynamics. The degree of change depends on lift height and whether complementary components are updated to compensate.
Final Verdict
When choosing a lift kit for a 2018-2023 Subaru Crosstrek, prioritize the outcomes you care about most: modest height gains for tire clearance and daily comfort, or larger lifts for added off-road capability. Match the kit type to your skills and budget, and plan for matching components such as shocks, brake line hardware, and a professional alignment.Accept the tradeoffs that come with increased height: changes to handling, possible additional maintenance, and the need for proper wheel and tire selection. With the right planning and installation, a lift can confidently expand the Crosstrek's capability while keeping it safe and enjoyable to drive.
Explore More:
- Check out all Subaru Crosstrek parts & accessories
- Explore Suspension & Steering
- Browse all Accessories
