7 Best 2 Inch Lift Kits for Subaru Crosstrek: Improved Clearance With Minimal Ride Compromise

Mike
By Mike
Certified Professional Automotive Mechanic – Owner and Editor of VehicleRuns
Last Updated: August 11, 2026

Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.

If you want modestly more ground clearance, room for slightly larger tires, or a more rugged stance without compromising daily drivability, a 2 inch lift kit for your Subaru Crosstrek is a practical upgrade. Choosing the right kit matters because lift solutions vary in how they alter suspension geometry, ride comfort, and steering feel.This guide presents seven shortlisted 2 inch lift kits chosen for their balance of on-road manners and off-road capability for the Crosstrek. We evaluate each option on ride quality, installation complexity, and how well it preserves alignment and handling. Read on to find the lift kit that fits how you drive and how you use your Crosstrek.

Top Picks at a Glance

Rough Country 2" Lift Kit for 2018-2020 Subaru Crosstrek 4WDRough Country 2" Lift Kit for 2018-2020 Subaru Crosstrek 4WD
Best Budget Lift Kit
A low-cost option that improves ride height without breaking the bank
salangid 2.0" Lift Kit (2.0" Front / 1.5" Rear) for 2018-2023 Subaru Crosstreksalangid 2.0" Lift Kit (2.0" Front / 1.5" Rear) for 2018-2023 Subaru Crosstrek
Best 2 Inch Lift Kit
Specifically tuned to provide a reliable two-inch ride height increase
ReadyLIFT 69-98200 2.0" SST Lift Kit with End Links for Subaru CrosstrekReadyLIFT 69-98200 2.0" SST Lift Kit with End Links for Subaru Crosstrek
Best Premium Lift Kit
A higher-end kit with superior materials, engineering, and performance
Rough Country 2" Lift Kit with N3 Struts for 2018-2024 Subaru Crosstrek 4WDRough Country 2" Lift Kit with N3 Struts for 2018-2024 Subaru Crosstrek 4WD
Best Complete Lift Kit
Includes all necessary components for a full, correct installation
Raceland 2in Lift Kit for Subaru Crosstrek (2013–2017)Raceland 2in Lift Kit for Subaru Crosstrek (2013–2017)
Best Adjustable Lift Kit
Offers tunable height or suspension settings to fine-tune ride
Daystar 2" Suspension Lift Kit for Subaru Crosstrek (polyurethane coil spacers)Daystar 2" Suspension Lift Kit for Subaru Crosstrek (polyurethane coil spacers)
Best Quick-Install Lift Kit
Designed for straightforward bolt-on installation with minimal modification
Protune Suspension Front 2" / Rear 1.5" Lift Kit for Subaru Crosstrek (2013–2017)Protune Suspension Front 2" / Rear 1.5" Lift Kit for Subaru Crosstrek (2013–2017)

1. Rough Country 2" Lift Kit for 2018-2020 Subaru Crosstrek 4WD

Best Overall Lift Kit

A vehicle-specific 2-inch leveling kit from Rough Country that uses front and rear strut spacers and sway bar brackets to raise a 2018–2020 Subaru Crosstrek 4WD for increased ground clearance and tire fitment.
Automotive Fit TypeVehicle Specific Fit
Included ComponentsFront Strut Extensions, Front Sway Bar Brackets, Rear Strut Extensions
Material TypeAlloy Steel
Maximum Lifting Height2 Inches

This Rough Country 2" lift kit is a vehicle-specific leveling system for 2018–2020 Subaru Crosstreks with 4WD that raises the ride height using front and rear strut spacers and included front sway bar brackets. Installation is designed to be straightforward without disassembling the struts, and the kit is laser cut and powder coated for corrosion resistance. In use it provides the typical benefits of a modest lift: improved ground clearance, the ability to run larger tires, and a more level, aggressive stance front to rear while largely retaining factory ride quality. The kit comes with components needed for basic fitment but requires basic suspension knowledge or a professional install to ensure safety and correct post-install checks. It is alloy steel construction and backed by a limited lifetime replacement promise, but buyers should plan for alignment and periodic inspections after installation and be mindful that a 2" lift is intended for light off-road use rather than heavy-duty trail modification.

Best for: Buyers who want a conservative, factory-friendly 2-inch lift to level their Crosstrek, add modest ground clearance, and fit slightly larger tires while keeping a near-stock ride and straightforward installation.

Less Ideal for: Drivers planning heavy off-road modification, large tire offsets, or lifts beyond 2 inches should choose a more substantial suspension system tailored to those needs.

Pros:
  • Vehicle-specific fit for 2018–2020 Crosstrek 4WD simplifies installation and alignment.
  • Laser-cut strut spacers and powder coat finish improve fit accuracy and corrosion resistance.
  • Includes front sway bar brackets so suspension geometry is addressed with the lift.
  • Maintains factory-like ride quality while adding 2 inches of lift for larger tires.
Cons:
  • Requires professional installation or solid mechanical knowledge for safe, reliable results.
  • Limited to a modest 2" lift so it is not suitable for aggressive off-road builds.

Verdict: The best all-around lift kit that balances ride quality, durability, fitment flexibility, and ease of installation for most buyers.

2. salangid 2.0" Lift Kit (2.0" Front / 1.5" Rear) for 2018-2023 Subaru Crosstrek

Best Budget Lift Kit

A vehicle-specific budget lift kit that raises the front by 2.0 inches and the rear by 1.5 inches for 2018–2023 Subaru Crosstreks to allow larger tires and modest ground clearance gains.
Maximum Lifting Height1.5 Inches
MaterialCast Iron
Automotive Fit TypeVehicle Specific Fit
Included ComponentsInstallation Hardware

This salangid lift kit is a straightforward, vehicle-specific solution to raise a 2018–2023 Subaru Crosstrek about 2.0 inches up front and 1.5 inches in the rear. It is built from cast iron components and ships with installation hardware, so it is intended for owners who want an affordable way to fit slightly larger tires and gain modest clearance without a full suspension overhaul. The kit preserves suspension geometry with an offset design to maintain camber angles and requires routine steps after installation including four-wheel alignment, headlight adjustment, and ADAS recalibration if equipped. In use you trade minimal complexity for a noticeable ride-height increase; the seller notes handling will feel different after installation and recommends gentler cornering and acceleration until you adapt. Installation is relatively straightforward for a competent DIYer or independent shop, and the kit supports common 15 and 17 inch tire options with some trimming for the largest sizes.

Best for: Buyers who want the lowest-cost way to gain about two inches of front lift on a Crosstrek while keeping installation simple and components reasonably durable.

Less Ideal for: Drivers seeking a full 2.0-inch matched front-and-rear lift, aggressive off-road use, or a performance-oriented suspension should consider stronger, purpose-built kits and shocks.

Pros:
  • Vehicle-specific fit for 2018–2023 Subaru Crosstrek simplifies installation and fitment
  • Cast iron construction aimed at providing solid, durable lift components
  • Includes installation hardware so fewer parts are needed to begin installation
  • Offset geometry design helps preserve front and rear camber angles after lift
Cons:
  • Rear lift is 1.5 inches rather than a full 2.0 inches, so overall stance is uneven
  • May require minor plastic trimming for the largest tire fits and ADAS recalibration adds extra cost/time

Verdict: The best budget lift kit for shoppers prioritizing price who still want a safe, functional lift with acceptable materials and straightforward installation.

3. ReadyLIFT 69-98200 2.0" SST Lift Kit with End Links for Subaru Crosstrek

Best 2 Inch Lift Kit

A vehicle-specific 2.0" front and 1.5" rear bolt-on lift kit for 2018–2024 Subaru Crosstrek that preserves factory alignment geometry.
Fitment2018-2024 Subaru Crosstrek
Front lift2.0 Inches
Rear lift1.5 Inches
MaterialAlloy Steel

This ReadyLIFT kit raises the front of 2018–2024 Subaru Crosstreks 2.0 inches and the rear 1.5 inches using alloy steel spacers and includes relocated front sway bar end links. It is a bolt-on solution designed to retain factory caster and camber through an offset spacer design, so you get a taller stance without changing the vehicle's basic handling. Installation is relatively quick compared with some other kits and requires no permanent modifications, although fitting larger tires may require minor trimming of plastic trim. The kit is engineered to accept a 215/75-15 tire on a 15×7 wheel with +15mm offset and can accommodate a 235/75-15 with some trimming, providing noticeably better ground clearance around the rockers. Practical benefits include improved clearance for light off-road use and the ability to keep the factory ride quality while gaining a modest lift. Limitations are that this is a modest lift aimed at fit and stance rather than heavy-duty off-road articulation, and the rear lift is 1.5 inches rather than a full 2.0 inches.

Best for: Buyers who want a precise, modest front lift for a 2018–2024 Crosstrek that keeps factory handling and alignment while improving ground clearance and tire fitment.

Less Ideal for: Drivers seeking large lifts, heavy off-road capability, or full-frame suspension overhauls should look at more aggressive kits or long-travel solutions.

Pros:
  • Vehicle-specific design for 2018–2024 Subaru Crosstrek that bolts on without permanent modification
  • Offset spacer design preserves factory camber and caster for predictable handling
  • Includes front sway bar end links to maintain correct suspension geometry
  • Accepts 215/75-15 tires without rubbing and can fit 235/75-15 with minor trim
Cons:
  • Rear lift is 1.5 inches, not a full 2.0 inches which creates a slight rake
  • Not intended for heavy-duty off-road use or major suspension travel upgrades

Verdict: The best 2 inch lift kit for buyers who need a precise two-inch ride height gain with components engineered to maintain handling and alignment.

4. Rough Country 2" Lift Kit with N3 Struts for 2018-2024 Subaru Crosstrek 4WD

Best Premium Lift Kit

A vehicle-specific 2-inch lift kit that replaces front struts with N3 lifted struts to level a 2018–2024 Subaru Crosstrek 4WD and allow larger tires.
Maximum Lifting Height2 Inches
MaterialAlloy Steel
Automotive Fit TypeVehicle Specific Fit
Included ComponentsLift Kit

This Rough Country kit replaces the Crosstrek front struts with lifted N3 struts to provide a 2-inch level from front to rear, giving more ground clearance and the ability to run larger tires while eliminating the nose-down factory stance. Installation is intended to be straightforward with no strut disassembly or drilling required, though light trimming is noted; the kit is aimed at technicians or competent DIYers and comes with guidance to have fasteners rechecked after initial miles. The alloy steel construction and vehicle-specific fit help keep ride quality close to stock while adding a modest, SUV-like stance for mild off-road use and improved appearance. The package includes a lifetime replacement guarantee which increases long-term confidence, but buyers should plan for a wheel alignment and periodic inspection of suspension and driveline components after installation. This kit suits owners who want a modest, durable lift without heavy off-road overhaul rather than those seeking large suspension travel or race-tuned performance.

Best for: Buyers who prioritize a refined, factory-like upgrade and want a durable, well-built 2-inch lift to level their Crosstrek and run slightly larger tires while preserving daily-drive comfort.

Less Ideal for: Drivers seeking aggressive off-road suspension travel, heavy-duty rock-crawling capability, or large lifts should consider more specialized or performance-oriented systems instead.

Pros:
  • Vehicle-specific design for 2018–2024 Crosstrek 4WD ensures correct fit and easier installation
  • N3 lifted struts raise the front without separate spacers, simplifying the lift
  • Maintains near-factory ride quality while adding 2 inches of clearance
  • Alloy steel construction and a lifetime replacement guarantee provide durability and support
Cons:
  • Not intended for major off-road articulation or heavy-duty lift use
  • May require light trimming during installation and professional alignment after fitment

Verdict: The best premium lift kit for buyers willing to pay more for superior build quality, ride tuning, longer-lasting components, and refined on‑road manners.

5. Raceland 2in Lift Kit for Subaru Crosstrek (2013–2017)

Best Complete Lift Kit

A bolt-on lift kit that raises a 2013–2017 Subaru Crosstrek about 2 inches up front and 2.5 inches in the rear using spacers and rear multi-link mounts.
Fits2013-2017 Subaru Crosstrek
Lift range2 in front, 2.5 in rear
Auto part positionFront

This Raceland lift kit is a single-package solution that adds roughly 2 inches of front lift and about 2.5 inches at the rear to a 2013–2017 Subaru Crosstrek. It uses front subframe spacers and included rear multi-link mounts plus hardware so the installation is a direct bolt-on job for a confident DIYer with basic tools. The kit is designed to preserve factory ride quality and alignment by maintaining proper mount geometry while providing extra clearance for larger tires and loaded trips. Because the kit focuses on spacers and mounts rather than new springs or shocks, it keeps the factory suspension behavior largely intact but will not change damping characteristics. The practical benefits are straightforward: more clearance, a leveled stance when carrying cargo, and minimal drivetrain or steering modification during install. Expect a hands-on install that requires mechanical competence and alignment after fitting, and note this is a spacer-style kit rather than a full suspension overhaul.

Best for: DIY-minded Crosstrek owners who want a single-package lift that supplies all brackets, spacers, and hardware for a direct bolt-on installation to add clearance without replacing suspension components.

Less Ideal for: Drivers seeking a full suspension upgrade with different spring rates or improved damping, or those uncomfortable with hands-on installation and alignment tasks.

Pros:
  • Complete hardware package with front spacers and rear multi-link mounts for a single-package install
  • Bolt-on design intended to preserve factory ride quality and alignment geometry
  • Adds meaningful clearance: about 2 inches front and 2.5 inches rear to accommodate larger tires and cargo
  • Designed specifically for 2013–2017 Subaru Crosstrek fitment so parts match vehicle mounting points
Cons:
  • Spacer-style lift does not include upgraded shocks or springs so damping and ride control remain stock
  • Installation requires mechanical skill and a post-install alignment to ensure proper handling

Verdict: The best complete lift kit for DIYers who want a single-package solution that includes every bracket, spacer, and hardware piece needed for a proper install.

6. Daystar 2" Suspension Lift Kit for Subaru Crosstrek (polyurethane coil spacers)

Best Adjustable Lift Kit

A 2-inch bolt-on lift kit that uses polyurethane coil spacers to raise a Subaru Crosstrek for extra tire clearance without disassembling the struts.
Auto Part PositionFront, Rear
MaterialPolyurethane (PU)
Included ComponentsSuspension Leveling Kit
Maximum Lifting Height2 Inches
Automotive Fit TypeVehicle Specific Fit

This Daystar 2" lift kit raises a Subaru Crosstrek by two inches using polyurethane coil spacers that sit on the factory coils. Installation is bolt-on only and does not require strut disassembly or drilling, so most installs can be completed with basic tools and without a suspension shop. The kit preserves the vehicle's factory suspension geometry while creating enough clearance for roughly 29" tires on stock wheels or slightly larger with trimming. Polyurethane spacers are corrosion resistant and reduce metal-on-metal contact and squeaks compared with bare metal spacers. Because the lift comes from spacers rather than new springs or adjustable struts, it gives a simple, reliable height increase with minimal change to ride characteristics, but it does not provide adjustable ride-height settings or tuned damping adjustments. The kit is vehicle-specific and FMVSS126 compliant, making it a straightforward choice for Crosstrek owners who want a clean, reversible 2" lift for occasional off-road use or improved ground clearance in poor weather.

Best for: Buyers who want a straightforward, low-effort way to raise a Crosstrek about two inches for better tire clearance or light off-road use while keeping the stock suspension intact.

Less Ideal for: Drivers seeking an adjustable lift with multiple height settings or someone wanting to tune ride quality through adjustable shocks should look at full adjustable kits instead.

Pros:
  • True bolt-on installation with no drilling or strut disassembly required
  • Polyurethane spacers resist corrosion and reduce squeaks compared with metal spacers
  • Vehicle-specific design preserves factory suspension geometry
  • Provides enough clearance to fit roughly 29" tires on stock wheels
  • FMVSS126 compliant for safety-related stability control concerns
Cons:
  • Does not offer adjustable ride-height or damping control since it uses fixed coil spacers

Verdict: The best adjustable lift kit for users who want the flexibility to tweak ride height or suspension characteristics without swapping major components.

7. Protune Suspension Front 2" / Rear 1.5" Lift Kit for Subaru Crosstrek (2013–2017)

Best Quick-Install Lift Kit

A vehicle-specific bolt-on lift kit that raises the front 2 inches and rear 1.5 inches to increase ground clearance while retaining factory ride quality.
Automotive Fit TypeVehicle Specific Fit
Set NameProtune Suspension Front 2" Rear 1.5" Lift Kit
Included Componentssway bar
Material TypeSteel

This Protune Suspension lift kit uses front and rear spring mount spacers and cradle drop components to quickly add clearance to Subaru Crosstreks from 2013 to 2017. It is designed for a 100% bolt-on installation that DIY mechanics can complete with basic hand tools following the included digital PDF instructions; alignment is recommended after installation. The kit includes sway bar end links to maintain the factory steering geometry and is made from steel with reinforced nylon parts for durability. In everyday use it provides modest lift that helps fit larger tires and reduces scraping on rough roads without noticeably changing the vehicle ride comfort. Limitations are that it is a modest, spacer-style lift so it will not alter suspension travel or handling like a full shock and spring upgrade, and installers should be comfortable working under the vehicle and following alignment specs. For someone who wants a fast, reversible lift that keeps factory feel, this kit delivers a practical solution.

Best for: DIY mechanics who want a straightforward, mostly bolt-on way to raise a 2013–2017 Crosstrek for better clearance and occasional light off-road use while minimizing shop time.

Less Ideal for: Drivers seeking major suspension performance changes, increased articulation, or a full shock and spring overhaul should look at complete suspension systems instead.

Pros:
  • Bolt-on spacer design enables a fast installation with basic tools and the included digital instructions
  • Includes sway bar end links to preserve factory steering geometry after lift
  • Steel construction with reinforced nylon components for durability
  • Adds front 2" and rear 1.5" lift to increase ground clearance while keeping factory ride comfort
Cons:
  • Spacer-style lift does not increase suspension travel or improve off-road articulation
  • Installation requires alignment and some comfort working under the vehicle

Verdict: The best quick-install lift kit for DIY mechanics seeking a bolt‑on solution that minimizes shop time and uses basic tools for a fast, reliable fit.

Choosing the Right Subaru Crosstrek 2 Inch Lift Kit: Key Factors to Consider

Ground Clearance and Tire Fitment

How much actual ground clearance you gain depends on more than the nominal 2 inch label. Wheel offset, tire diameter, and fender trimming all affect whether you can safely run larger tires without rubbing. Consider the clearance at both the bumper valance and the wheel arches when planning for larger tires.

Tire choice is part of the equation. A taller, wider tire may need an additional offset change to avoid inner fender or suspension contact. If you plan to use the extra clearance for mild off-road use, look for kits that maintain enough travel and avoid introducing pinch points that can catch debris. A kit that provides consistent lift across front and rear will help maintain predictable handling as tires grow.

Ride Quality and Shock Compatibility

A 2 inch lift can change spring rates, shock travel, and suspension geometry which affects ride comfort. Some kits rely on simple spacers, while others include longer or revalved shocks. Assess whether the kit requires new shocks or if the stock units will remain within safe travel limits.

Compatibility with OEM or upgraded shocks matters for damping behavior. If you frequently carry cargo or passengers, select a kit that does not make the ride excessively harsh or floaty. Kits that give clear recommendations for shock length and mounting are easier to tune for the balance you want between comfort and control.

Installation Complexity and Tools Required

Installation difficulty ranges from bolt-on spacer kits to those requiring spring compressors, strut disassembly, or control arm adjustments. Decide whether you will install the kit yourself or use a shop. DIY-friendly kits will typically ship with all necessary hardware and clear instructions, while more involved kits might require specialized tools or alignment after installation.

Also factor in the time needed for installation and the likelihood of needing an alignment afterward. Any lift that alters ride height or suspension angles will generally require a professional alignment to restore proper tire wear and handling.

Alignment and Steering Geometry

Raising the vehicle by two inches can change caster, camber, and toe settings. These changes can lead to increased tire wear, altered steering feel, or pull if not corrected. Some kits include adjustable components or recommend specific alignment specs to compensate for the new ride height.

Ask whether the kit requires additional camber or caster correction parts. Maintaining predictable steering and minimizing uneven tire wear depends on getting an alignment tuned for the lifted ride height, so plan for that service when budgeting the upgrade.

Durability and Corrosion Resistance

Off-road and seasonal driving expose lift hardware to moisture, salt, and debris. Look for kits that use plated or stainless hardware and feature robust mounting plates or machined spacers. Poorly protected components can corrode, seize, or fail prematurely, especially in climates with road salt.

Also consider warranty language and whether replacement bushings or hardware are available. Durable construction reduces long-term maintenance and helps the kit retain a consistent fit and finish over many seasons of use.

How a 2 Inch Lift Changes Crosstrek Handling

A modest 2 inch lift raises the vehicle's center of gravity while offering improved approach and departure clearance for light trails. Even a small height increase shifts suspension geometry slightly, which can alter body roll characteristics and steering responsiveness.

Because the Crosstrek is used for both daily commuting and light off-road duties, the goal with a 2 inch lift is to add capability without compromising everyday manners. Understanding these tradeoffs helps you choose hardware that keeps predictable steering and controlled body motion.

  • Slightly higher center of gravity increases lean in aggressive cornering
  • Possible reduction in available suspension travel if not paired with compatible shocks
  • Improved clearance for rocks, ruts, and larger tires

Mounting Options and What They Mean

Lift kits generally use one of a few mounting approaches: strut spacers, coil spring spacers, taller coil springs, or combination kits that include shock-length changes. Each approach affects installation time, cost, and how the suspension behaves after the lift.

Strut or spacer kits can be quicker to install but may limit overall suspension travel. Replacing springs or using a full suspension kit tends to give a more integrated ride quality but requires more mechanical work and potentially new shocks.

  • Strut spacers: quicker install, may change strut travel
  • Coil spring spacers: retain spring rate but can compress under load
  • Taller springs: better preserved suspension dynamics, more invasive install

Tires, Wheels, and Brake Clearance Considerations

A 2 inch lift often enables fitting slightly larger tires, but wheel width and offset will determine whether brake calipers or inner fenders interfere. Check both front and rear fitment because steering geometry can expose different clearance issues than the rear axle.

When choosing wheels, factor in backspacing and offset changes required to keep tires clear of suspension components. Sometimes a modest wheel spacer or a change in wheel offset is a simpler solution than a much larger tire.

  • Verify brake caliper clearance with planned wheel and tire combos
  • Consider narrower tires if wheel offset limits exist
  • Test clearance with full steering lock and suspension droop

Maintaining Warranty and Vehicle Systems

A 2 inch lift is typically a minor modification, but altering suspension components can affect certain warranty claims depending on the region and the nature of any future failures. Keep installation documentation and receipts to help demonstrate proper installation if needed.

Also consider electronic systems such as traction control and ABS. These systems rely on wheel speed and suspension movement assumptions. A modest lift rarely interferes, but large changes to tire diameter or unsprung mass can affect sensor behavior and require recalibration.

  • Retain installation and parts documentation
  • Avoid large tire size increases without checking sensor limits
  • Ask your installer about any vehicle-specific recalibrations

Practical Off-Road Uses for a 2 Inch Lift

For most Crosstrek owners, a 2 inch lift is enough for improved clearance over rocks, logs, and rutted fire roads. It also lets you run slightly taller tires for better traction without drastically changing on-road dynamics.

If your trips include mild technical sections or seasonal deep ruts, the added clearance reduces the chance of underbody contact. Keep expectations realistic: a 2 inch lift is not a substitute for heavy-duty off-road suspension but is a pragmatic upgrade for light overlanding and trail access.

  • Better ability to clear trail obstacles and creek crossings
  • Improved utility for rooftop cargo and light camping setups
  • Not intended for extreme rock crawling or heavy off-road loads

Still looking for the perfect fit?

Select your Subaru Crosstrek configuration to see the most relevant Lift Kits recommendations

How We Chose the Best Subaru Crosstrek 2 Inch Lift Kit

We focused on lift solutions that deliver a consistent 2 inch increase while preserving the Crosstrek's suspension geometry and reliability. Our editorial filters prioritized kits designed specifically for this model year family and that clearly list vehicle fitment, mounting points, and any required additional components. We emphasized ride quality and durability by considering designs that maintain factory control-arm angles, shock compatibility, and corrosion-resistant hardware. Installation complexity was another key filter; we favored kits that can be installed with common tools or by a typical independent shop without extensive frame modification.Evaluation criteria included: ability to preserve suspension geometry and alignment, compatibility with slightly larger tires, shock and strut interface requirements, corrosion protection and hardware quality, and documented installation steps or instructions. We excluded lift solutions that rely on unproven spacers that significantly change suspension travel or that require major cutting, welding, or custom fabrication. Also omitted were kits that lack clear parts lists or do not provide explicit Crosstrek fitment guidance. The result is a set of practical, purpose-built 2 inch lift kits that target owners who want modest clearance gains and reliable daily driving behavior.

Our full evaluation process is outlined in our review methodology.

FAQ

Will a 2 inch lift kit require new shocks on my Crosstrek?

It often depends on the kit design and stock shock travel. Some spacer-style kits let you keep the factory shocks, while taller springs or combined kits usually recommend longer or valved shocks to maintain proper damping and travel. Check the kit instructions and plan for shock replacement if the manufacturer advises it.

Can I install a 2 inch lift kit myself with basic tools?

Some kits are designed for DIY installation and include all necessary hardware, but others require spring compressors, strut disassembly, or control-arm adjustments. If you are comfortable with suspension work and have the right tools, a DIY install is possible. Otherwise, use a reputable shop to ensure safety and proper alignment.

How will a lift affect my Crosstrek's fuel economy?

A modest 2 inch lift combined with slightly larger tires can have a small impact on aerodynamics and rolling resistance, which may reduce fuel economy marginally. The actual change usually depends on tire size and driving habits and is often minor for a two inch increase.

Do I need an alignment after installing a 2 inch lift kit?

Yes. Any lift that changes ride height or suspension geometry should be followed by a professional alignment to correct camber, caster, and toe settings. Proper alignment minimizes uneven tire wear and ensures predictable handling.

Will the lift change my Crosstrek's traction control or ABS performance?

Most modest lifts do not directly disable traction control or ABS, but changes in tire diameter or unsprung mass can affect wheel speed readings. If you change tire size significantly, consider checking system behavior and consult a technician about recalibration options if you notice anomalies.

What tire size increase is realistic with a 2 inch lift?

A 2 inch lift typically allows for a slight increase in overall tire diameter, such as one size up depending on wheel offset and fender clearance. Exact fitment varies by wheel width and offset, so verify clearance under full steering lock and suspension compression before finalizing your tire choice.

Final Verdict

A 2 inch lift kit is a practical way to add useful ground clearance and room for slightly larger tires while keeping the Crosstrek's daily driving behavior intact. Prioritize kits that account for shock compatibility and preserve suspension geometry to minimize negative impacts on steering and tire wear.Balance your goals between added clearance and ride comfort, plan for a professional alignment after installation, and choose durable hardware to reduce long-term maintenance. With those priorities in mind, you can confidently pick a 2 inch lift that meets your trail and daily driving needs.

You May Also Like

Mike - Certified Professional Automotive Mechanic

About the Author: Mike

Mike is an experienced professional automotive mechanic with hands-on experience maintaining and repairing a wide range of vehicles. At VehicleRuns, he focuses on helping car owners make better decisions about parts, tools, and repairs by combining real-world experience with clear, practical guidance.