6 Best Lift Kits for Subaru Crosstrek: Gain Clearance And Fit Larger Tires

Mike
By Mike
Certified Professional Automotive Mechanic – Owner and Editor of VehicleRuns
Last Updated: June 19, 2026

Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.

If you want more ground clearance, better approach angles, or the ability to run larger tires on your Crosstrek, choosing the right lift kit matters. The right kit affects ride quality, suspension geometry, and long-term reliability, so making an informed choice helps you avoid common fitment and handling issues. This guide covers six shortlisted lift kits that represent solid options for Crosstrek owners and explains the criteria used to evaluate them. Read on to understand the tradeoffs and which features matter most before you buy.

Top Picks at a Glance

Daystar 2" Lift Kit for 2019 Subaru Crosstrek (Polyurethane Coil Spacers)Daystar 2" Lift Kit for 2019 Subaru Crosstrek (Polyurethane Coil Spacers)
Best quality
Built to a higher standard if you want something more solid
Rough Country 2" Lift Kit with N3 Struts for 2018-2024 Subaru Crosstrek 4WDRough Country 2" Lift Kit with N3 Struts for 2018-2024 Subaru Crosstrek 4WD
Best Value
The sweet spot between price and what you get
ReadyLIFT 69-98200 2.0" SST Lift Kit w/ End Links for Subaru CrosstrekReadyLIFT 69-98200 2.0" SST Lift Kit w/ End Links for Subaru Crosstrek
Best Budget
The cheapest option that still gets the job done reliably
maXpeedingrods Lift Spacer Kit for Subaru XV Crosstrek (2013–2017)maXpeedingrods Lift Spacer Kit for Subaru XV Crosstrek (2013–2017)
Highest Rated
A top-rated pick with lots of positive feedback
salangid 2.0" Front / 1.5" Rear Lift Kit for Subaru Crosstrek (2018–2023)salangid 2.0" Front / 1.5" Rear Lift Kit for Subaru Crosstrek (2018–2023)
Best Seller
A high-volume bestseller chosen again and again
Rough Country 2" Lift Kit for 2013-2017 Subaru Crosstrek 4WDRough Country 2" Lift Kit for 2013-2017 Subaru Crosstrek 4WD

1. Daystar 2" Lift Kit for 2019 Subaru Crosstrek (Polyurethane Coil Spacers)

Daystar 2" Lift Kit for 2019 Subaru Crosstrek (Polyurethane Coil Spacers)
Best overall
A vehicle-specific 2-inch polyurethane coil spacer lift kit designed to raise a 2019 Subaru Crosstrek without disassembling the struts and allow for larger tire fitment.
Fitment2019 Subaru Crosstrek 4WD
Maximum Lifting Height2 Inches
MaterialPolyurethane (PU)
Included ComponentsSuspension Leveling Kit

This Daystar kit uses polyurethane coil spacers to add two inches of lift to a 2019 Subaru Crosstrek while keeping the factory suspension geometry intact. It installs as a bolt-on leveling kit with no strut disassembly or drilling required, so you can gain clearance for up to 29-inch tires on the stock wheels or fit slightly larger tires with minor trimming. The polyurethane spacers are intended to resist metal-on-metal contact, reduce corrosion, and limit squeaks compared with bare metal adapters. Because the spacers work with the existing coils, ride characteristics remain close to factory and the kit preserves stability-regulating systems. The practical benefits are easier installation for a DIYer or shop, improved off-road clearance, and added traction in poor weather. Limitations are the modest 2-inch lift, which may not suit heavy off-road modification plans, and the kit does not include shocks or other suspension components, so full lift setups will require additional parts for larger raises or heavy-load use.

Best for: Balanced buyers who want a simple, factory-friendly way to add modest ground clearance and fit slightly larger tires on a 2019 Subaru Crosstrek without major suspension work.

Less Ideal for: Drivers planning major off-road modifications, heavy-load towing, or lifts larger than two inches should consider a full suspension kit with new shocks and control components instead.

Pros:
  • Vehicle-specific fit for 2019 Subaru Crosstrek for straightforward compatibility
  • 100% bolt-on installation with no drilling or strut disassembly speeds installation
  • Polyurethane spacers reduce metal-on-metal contact, corrosion, and squeaks
  • Provides enough lift to clear 29" tires on stock wheels for modest off-road use
Cons:
  • Only a 2-inch lift so not suitable for larger multi-inch lifts or heavy-duty off-road builds
  • Does not include shocks, struts, or other suspension components needed for bigger lifts

Verdict: A straightforward, factory-friendly 2-inch lift for 2019 Subaru Crosstrek owners who want modest clearance gains with an easy bolt-on install.

2. Rough Country 2" Lift Kit with N3 Struts for 2018-2024 Subaru Crosstrek 4WD

Rough Country 2" Lift Kit with N3 Struts for 2018-2024 Subaru Crosstrek 4WD
Best quality
A vehicle-specific 2-inch leveling lift kit that replaces front struts with lifted N3 struts to raise and level the 2018–2024 Subaru Crosstrek 4WD.
Maximum Lifting Height2 Inches
Automotive Fit TypeVehicle Specific Fit
Included ComponentsLift Kit
MaterialAlloy Steel

This Rough Country kit swaps the Crosstrek’s front struts for lifted N3 struts to provide a 2-inch lift and a leveled stance from front to rear. It is designed for owners who want a modest height increase to run larger tires, improve ground clearance, and give the Crosstrek a more aggressive look while keeping largely stock ride characteristics. Installation is intended to be user-friendly with no strut disassembly or drilling required, though light trimming is noted in the instructions and professional installation is recommended for safety and alignment. The kit’s vehicle-specific fit and retained ride quality make it practical for mixed on-road and light off-road use, but the small lift means it is not for serious rock-crawling or heavy-duty off-road modification. The product includes manufacturer installation guidance and ongoing checks for fasteners and alignment are necessary after installation to maintain safe handling.

Best for: Performance-oriented Crosstrek owners who want a factory-quality leveling lift that improves stance and allows slightly larger tires while preserving daily-drive ride and handling.

Less Ideal for: Drivers seeking major suspension modification, maximum off-road articulation, or large tire fitment beyond the modest 2-inch increase should look at more aggressive suspension systems.

Pros:
  • Vehicle-specific kit tuned for the 2018–2024 Subaru Crosstrek 4WD
  • Replaces front struts with lifted N3 struts so spacers are not required
  • Easy installation approach with no drilling and no strut disassembly
  • Maintains near-factory ride quality while increasing ground clearance
Cons:
  • Only provides a modest 2-inch lift, not suitable for heavy-duty off-road clearance needs
  • May require light trimming and professional alignment after installation

Verdict: A practical 2-inch, vehicle-specific lift that improves clearance and appearance while retaining near-factory ride quality for performance-minded Crosstrek owners.

3. ReadyLIFT 69-98200 2.0" SST Lift Kit w/ End Links for Subaru Crosstrek

ReadyLIFT 69-98200 2.0" SST Lift Kit w/ End Links for Subaru Crosstrek
Best Value
A vehicle-specific bolt-on lift kit that raises a 2018–2024 Subaru Crosstrek 2.0 inches front and 1.5 inches rear while retaining factory suspension geometry.
Automotive Fit TypeVehicle Specific Fit
Included Components2.0'' SST Lift Kit w/ End Links
Material TypeAlloy Steel
Maximum Lifting Height2 Inches

The ReadyLIFT 69-98200 is a bolt-on lift kit engineered for 2018–2024 Subaru Crosstrek models to increase ride height and ground clearance without major modifications. It uses offset front spacers and included sway bar end links to maintain factory camber and caster, so alignment and handling remain close to stock after installation. Typical use is for drivers who want extra clearance for larger tires or a more aggressive stance; the kit supports a 215/75-15 tire without trimming and can accept a 235/75-15 with minor plastic trimming. Installation is designed to be faster than many competitors and keeps the factory ride quality by avoiding heavy-duty spring or strut changes. The alloy steel construction and vehicle-specific fit add durability and a precise fit, but the kit only provides modest lift and does not replace heavy-load suspension components for serious off-road use. Buyers should plan a professional alignment after installation and expect limited lift compared with full suspension conversions.

Best for: Practical optimizers who want a cost-effective, factory-friendly way to gain extra ground clearance and fit larger tires while keeping stock ride characteristics.

Less Ideal for: Drivers seeking major suspension upgrades for heavy off-road use or maximum lift should consider full suspension kits or professionally engineered long-travel systems instead.

Pros:
  • Vehicle-specific bolt-on design for 2018–2024 Crosstrek reduces fitment guesswork
  • Offset spacer design preserves factory camber and caster for predictable handling
  • Includes front sway bar end links to restore correct geometry after lift
  • Allows fitting of larger 215/75-15 tires without trimming and up to 235/75-15 with minor trimming
  • Alloy steel construction for durability
Cons:
  • Provides only modest lift and is not a replacement for heavy-duty off-road suspension upgrades
  • Rear lift is lower than front which may change vehicle stance

Verdict: A straightforward, vehicle-specific bolt-on lift that raises the Crosstrek with minimal changes to factory alignment and ride quality.

4. maXpeedingrods Lift Spacer Kit for Subaru XV Crosstrek (2013–2017)

maXpeedingrods Lift Spacer Kit for Subaru XV Crosstrek (2013–2017)
Best Budget
A bolt-on lift spacer kit that raises a 2013–2017 Subaru XV Crosstrek about 2 inches front and 1.5 inches rear using powder-coated high tensile carbon steel spacers.
ApplicationSubaru XV Crosstrek 2013-2017
MaterialHigh Tensile Strength Carbon Steel
FinishPowder Coated
Lift Height2" Front & 1.5" Rear

This maXpeedingrods spacer kit adds modest front and rear lift to Subaru XV Crosstreks from 2013 to 2017 via bolt-on spacers that reuse factory mounting points. Installation is straightforward for a competent DIYer or a shop since the kit includes front and rear spacers plus cradle/drop spacers and does not require replacement struts. The parts are made from high tensile carbon steel with a powder coat to resist corrosion, and the stated 2-inch front and 1.5-inch rear lift increases ground clearance and gives a leveled, more aggressive stance while allowing fitment of slightly larger tires. Because these are spacers rather than new springs or shocks, you keep the stock suspension valving and ride characteristics but should expect geometry changes that can affect alignment and tire wear; professional alignment after installation is recommended. This is a practical, low-cost way to gain clearance and a lifted look, but it is not a full suspension upgrade for heavy off-road use or significant load carrying.

Best for: Budget-conscious Crosstrek owners wanting a cost-effective, DIY-friendly way to raise ride height and fit slightly larger tires while keeping stock suspension components.

Less Ideal for: Drivers planning aggressive off-road use, heavier load carrying, or who want a full suspension performance upgrade should choose a complete spring or shock-based lift instead.

Pros:
  • Bolt-on design uses factory mounting points for relatively simple installation
  • Constructed from high tensile carbon steel with powder-coated finish for corrosion resistance
  • Provides a leveled stance with about 2" front and 1.5" rear lift to increase ground clearance
  • Includes front, rear and cradle/drop spacers so all required spacer pieces are supplied
Cons:
  • Spacer-based lift keeps factory suspension components and valving which limits performance gains compared with new springs or a full lift kit
  • Lift height may not match spacer thickness exactly because vehicle suspension geometry affects final ride height

Verdict: An affordable bolt-on spacer kit that gives a Crosstrek a leveled, higher stance without replacing factory suspension components.

5. salangid 2.0" Front / 1.5" Rear Lift Kit for Subaru Crosstrek (2018–2023)

salangid 2.0" Front / 1.5" Rear Lift Kit for Subaru Crosstrek (2018–2023)
Highest Rated
A vehicle-specific lift kit that raises the front 2.0 inches and rear 1.5 inches on 2018–2023 Subaru Crosstrek models to allow larger tires and improved ground clearance.
CompatibilitySubaru Crosstrek 2018-2023
Front lift2.0 Inches
Rear lift1.5 Inches
MaterialCast Iron
Included componentsInstallation Hardware

This salangid lift kit is a vehicle-specific replacement designed to add 2.0 inches up front and 1.5 inches at the rear for Subaru Crosstrek models from 2018 through 2023. It installs using the supplied hardware and cast iron components and is intended to maintain factory camber geometry through an offset design so wheel alignment stays close to stock. Typical use is for owners who want modest ground clearance and the ability to fit taller tires without major suspension changes. Practical benefits include a noticeable visual lift, compatibility notes for Limited models with auto-leveling headlights, and minimal trimming required for certain tire and wheel combinations. Important limitations are that alignment, headlight aim, and ADAS recalibration are required after installation and handling will feel different from factory settings, so drivers should expect altered steering response and acceleration characteristics. Some buyers reported small fitment tweaks like bending brackets and consulting extra installation guides.

Best for: Buyers who prioritize a reliable, factory-focused upgrade that keeps suspension geometry stable while adding modest lift for practical off-road clearance and tire upgrades.

Less Ideal for: Drivers seeking maximum lift, full off-road suspension overhaul, or a plug-and-play performance kit that requires no post-install service should consider other options.

Pros:
  • Vehicle-specific fit for 2018–2023 Subaru Crosstrek which simplifies installation.
  • Offset geometry maintains original camber angles to reduce alignment corrections.
  • Includes installation hardware and cast iron components for durable mounting.
  • Allows fitting larger tires and provides modest ground clearance increase without major suspension overhaul.
Cons:
  • Requires post-installation procedures including four-wheel alignment, headlight adjustment, and ADAS recalibration where equipped.
  • Handling and acceleration characteristics will change from factory settings and may require driving adjustments.

Verdict: A practical, vehicle-specific lift that raises a 2018–2023 Crosstrek with a factory-friendly design to fit larger tires and improve ground clearance.

6. Rough Country 2" Lift Kit for 2013-2017 Subaru Crosstrek 4WD

Rough Country 2" Lift Kit for 2013-2017 Subaru Crosstrek 4WD
Best Seller
A complete 2-inch lift kit from Rough Country designed for 2013–2017 Subaru Crosstrek 4WD that includes front and rear strut spacers, cradle spacers, brake line brackets, and hardware.
Brand NameRough Country
Included ComponentsStrut extensions, cradle spacers, brake line brackets, hardware
Material TypeAlloy Steel
Maximum Lifting Height2 Inches

This Rough Country 2" lift kit raises a 2013–2017 Subaru Crosstrek 4WD evenly front to rear using machined strut spacers and cradle spacers to provide extra ground clearance and a more aggressive stance. Installation is intended for a professional or a competent DIYer with suspension experience since the kit requires dropping the rear cradle and replacing/inspecting several fasteners; Rough Country includes brake line brackets and hardware to complete the job. The kit is powder coated and made from alloy steel for corrosion resistance and long life, and several buyers report the car retains a near-factory ride quality after installation while accommodating larger tires. Known practical limitations are occasional packaging errors or missing/incorrect bolts that have required aftermarket sourcing or vendor support, and some shops recommend minor tweaks to rear geometry for best handling. The product comes with Rough Country support and a limited lifetime replacement promise for parts issues.

Best for: Risk-averse mainstream buyers who prioritize a tested, widely used lift solution and want a modest, factory-style lift to improve clearance and appearance without radical suspension modification.

Less Ideal for: Drivers seeking large lifts, major off-road suspension upgrades, or a plug-and-play bolt-on with no mechanical work; also not ideal if you cannot access a qualified installer or basic shop tools.

Pros:
  • Engineered to lift the Crosstrek 2 inches front and rear for improved ground clearance and tire fitment
  • Includes front and rear strut spacers plus cradle spacers and brake line brackets for a full kit installation
  • Powder coated alloy steel components resist corrosion for long-term durability
  • Maintains near-factory ride quality according to multiple user reports
Cons:
  • Some buyers have received incorrect or missing hardware requiring replacement before installation
  • Installation may require lowering the rear cradle and professional-level tools and knowledge

Verdict: A straightforward, factory-friendly 2" lift kit built to give 2013–2017 Crosstreks extra clearance and a more aggressive look while preserving ride quality.

Looking for the perfect fit?

Select your Subaru Crosstrek configuration to see the most relevant Lift Kits recommendations

Choosing the Right Subaru Crosstrek Lift Kit: Key Factors to Consider

Lift Height

Lift height determines how much additional clearance you gain and directly affects what size tires you can run. A modest 1 to 1.5 inch lift can improve clearance and aesthetics without major suspension changes, while taller lifts increase articulation but may require additional components to maintain proper geometry.

Consider how the chosen height interacts with fender clearance, steering stops, and brake lines. Taller lifts can change suspension travel and may necessitate bump stop adjustments or extended sway bar endlinks to avoid binding during full droop or compression.

Suspension Type And Ride Quality

Different kits alter the Crosstrek's suspension behavior in distinct ways. Some lifts use spacers or strut extensions that preserve the factory dampers and springs, while others swap springs or add longer shocks to change spring rates and damping characteristics.

Think about whether you want to retain a compliant daily-driving ride or prioritize firmer off-road control. Matching spring rate and damper tuning to your typical load and driving style helps prevent excessive body roll, harshness, or premature wear of other suspension parts.

Compatibility With Larger Tires

One common reason to lift a Crosstrek is to fit wider or taller tires. Ensure the kit provides enough vertical and lateral clearance for the tire sizes you intend to use, accounting for wheel offset and potential rubbing during suspension compression or full-turn steering.

Also check brake and fender clearances. Running larger tires can increase unsprung weight and affect acceleration and braking, so consider whether additional upgrades such as stronger wheel bearings or brake hardware might be needed.

Installation Complexity And Required Modifications

Installation ranges from bolt-on spacer kits that a competent DIYer can fit in a garage, to more involved swaps requiring spring compressors, alignment tools, or welding. Review the instructions to see if the kit needs special tools, torque specs, or additional parts like extended sway bar links, drop brackets, or bump stop extensions.

Factor in your mechanical skill level and whether you have access to an alignment shop. Some kits may require an alignment and driveline inspection after installation to prevent premature wear.

Durability And Corrosion Resistance

Lift kit components operate in harsh environments and should resist corrosion and fatigue. Look for kits that use high-quality metals, protective coatings, and robust fasteners. Hardened washers, zinc plating, or powder-coating extend service life in wet and salty conditions.

Consider the warranty and availability of replacement parts. Durable construction reduces the risk of fastener loosening, bushing degradation, and metal fatigue that can compromise safety and ride quality over time.

Effect On Vehicle Handling And Safety

Raising the ride height changes the vehicle's center of gravity and can affect handling, braking distances, and roll stability. Choose a kit that minimizes adverse effects by maintaining proper suspension geometry and offering components that mitigate increased body roll, such as tuned dampers or recommended sway bar adjustments.

Also check whether the kit preserves steering travel and does not introduce binding at full articulation. Proper post-installation alignment and torque checks are essential to ensure predictable handling and safe operation.

How We Chose the Best Subaru Crosstrek Lift Kit

We focused on lift kits that are specifically designed for the Subaru Crosstrek and that preserve safe suspension geometry. Selection criteria included verified lift height options, how the kit affects ride comfort and damping, compatibility with larger tires and brake clearances, durability of hardware and corrosion resistance, and ease of installation including required additional parts. We also considered whether the kit allows alignment within factory specifications and whether it maintains acceptable CV axle and drive-train angles.Kits were excluded if they were universal designs without Crosstrek-specific fitment details, if they required extensive chassis modification, or if documentation lacked clear torque specs and alignment guidelines. We prioritized kits that balance on-road manners with light off-road capability and that document installation steps, mounting points, and any necessary re-tuning. Finally, items that compromise safety-critical components or that lack clear warranty and materials information were not considered for this list.

Our full evaluation process is outlined in our review methodology.

FAQ

Will a lift kit void my Subaru Crosstrek warranty?

Whether a lift kit affects warranty coverage often depends on local laws and the specific warranty terms. In many regions, manufacturers must prove that a modification caused a failure before denying coverage for that component. Keep installation documentation and consult the warranty language or a dealer for specifics.

How high can I safely lift a Crosstrek?

Safe lift height depends on how well supporting components are addressed. Small lifts of one to two inches are commonly achieved with minimal changes, while larger lifts usually require additional parts to preserve geometry. Consider the impact on driveline angles and handling when selecting a height.

Can I install a lift kit myself?

Some lift kits are designed for competent DIYers and use bolt-on spacers or strut extensions, while others need spring compressors, torque tools, or alignment afterward. If you are unfamiliar with suspension work or lack tools, professional installation is recommended to ensure safety and correct alignment.

Will lifting my Crosstrek affect fuel economy and ride comfort?

Raising ride height and fitting larger tires can increase aerodynamic drag and rolling resistance, which often leads to modest reductions in fuel economy. Ride comfort may change depending on spring rates and damping; a properly tuned kit aims to balance improved clearance with acceptable on-road manners.

Do I need an alignment after installing a lift kit?

Yes, an alignment is usually necessary after any lift that alters suspension geometry or ride height. Proper alignment restores correct toe, camber, and caster settings, which helps prevent uneven tire wear and maintains predictable handling.

Conclusion

Choosing the right lift kit for a Subaru Crosstrek means balancing desired clearance and tire fitment against ride quality and handling tradeoffs. Prioritize kits that maintain safe suspension geometry, document installation steps, and include or recommend supporting hardware to avoid unintended stress on driveline components.Factor in your driving priorities, whether daily comfort or more aggressive off-road use, and plan for alignment and any additional parts needed. Careful selection and proper installation help ensure a reliable, predictable upgrade that meets your needs.

You May Also Like

Mike - Certified Professional Automotive Mechanic

About the Author: Mike

Mike is an experienced professional automotive mechanic with hands-on experience maintaining and repairing a wide range of vehicles. At VehicleRuns, he focuses on helping car owners make better decisions about parts, tools, and repairs by combining real-world experience with clear, practical guidance.