Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Honda Fit is showing increased vibration or clunks during acceleration, replacing the engine mount can make a noticeable difference in ride comfort and drivetrain stability. Choosing the right mount matters because fit, material, and noise isolation all affect how the car feels and how long the mount lasts.This guide covers seven shortlisted engine mounts chosen for reliability and performance in common driving conditions. We evaluated each option for durability, vibration control, and ease of installation to help you find the best fit for your needs.
Looking for other parts? See all Honda Fit parts & accessories.
Top Picks at a Glance
1. TAHIKO Engine and Transmission Mount Set for 2007–2008 Honda Fit 1.5L (Automatic)
| Fitment | 2007-2008 Honda Fit 1.5L Automatic |
|---|---|
| Included components | Front right motor mount, rear motor mount, transmission mount |
| Material Type | Metal |
| Finish | Powder Coated |
This three-piece mount kit replaces the front right motor mount, rear motor mount, and transmission mount on a 2007–2008 Honda Fit 1.5L automatic. Designed as a direct replacement, the set uses stamped steel and bonded rubber components with a powder-coated finish intended to control engine movement and reduce vibration and noise. Installation is typical for engine mounts and can be done by a competent home mechanic or a shop; the set comes with the three most commonly replaced mounts so you can address drivability issues like excessive vibration, clunking under acceleration, and harsh gear engagement. Buyers report generally good fitment and quieter operation when the mounts work as intended, but some reviews note occasional missing or simplified rubber damping features and mixed quality between pieces, so results can vary. This makes the kit a practical, lower-cost alternative to factory parts for a balanced buyer who wants a full mount refresh without paying OEM prices.
Best for: Balanced all-round buyers who want a complete, cost-conscious replacement to restore smoothness and reduce engine vibration without paying for OEM parts.
Less Ideal for: Shoppers seeking the highest-end, longest-lasting factory-grade mounts or exact OEM damping characteristics should consider factory replacements or premium aftermarket options instead.
- Sold as a three-piece set covering front right motor, rear motor, and transmission mounts for a complete refresh
- Direct-fit design specified for 2007–2008 Honda Fit 1.5L automatic transmissions
- Powder-coated steel construction intended to resist corrosion
- Claims factory-quality materials and testing to manage engine torque and dampen vibration
- Some users report inconsistent build quality and missing rubber damping on one mount
- A few buyers experienced fitment issues requiring adjustments or returns
Verdict: A convenient three-piece mount kit that gives 2007–2008 Honda Fit owners an affordable way to refresh mounting hardware and reduce vibration.
2. PATEWIN 4-Piece Engine and Transmission Mount Kit for 2009–2014 Honda Fit 1.5L (Automatic)
| Compatible Vehicles | 2009-2014 Honda Fit 1.5L Automatic Transmission |
|---|---|
| Kit Composition | 4-piece engine/transmission mount set |
| Front Mount Type | Hydraulic (fluid-filled) front mount |
| Material Type | Rubber with steel structural components |
This PATEWIN kit replaces the front hydraulic motor mount, transmission mount, and supporting torque mounts with factory-style components designed for the 2009–2014 Honda Fit 1.5L automatic. It is used as a full set replacement when worn mounts cause vibration, clunks, or excessive engine movement during acceleration and braking. Notable features include a hydraulic front mount to damp small engine shudders, high-strength steel brackets, dense elastomer sections, and direct bolt-on fit intended to match factory attachment points. In practice the kit restores engine stability, reduces cabin vibration and drivetrain noise, and lets the transmission and engine sit predictably under load. Common limits reported by users include occasional fitment or thread-quality issues on some pieces and mixed long-term durability feedback across batches. Installation requires basic mechanical skills and common tools, and replacing all mounts at once is recommended to rebalance powertrain loads and extend service life.
Best for: Performance-oriented owners who want a factory-style repair that restores engine stability and reduces vibration for a more responsive, solid-feeling Fit during spirited driving and daily use.
Less Ideal for: Buyers seeking a universal or multi-generation solution, DIYers wanting cheaper single-part replacements, or owners of manual-transmission Fits should look elsewhere.
- Complete 4-piece kit covers front hydraulic motor mount, transmission mount, and torque supports for a full repair.
- Hydraulic front mount absorbs small engine shudders better than solid rubber for smoother idle and low-RPM response.
- Direct bolt-on design matches factory mounting points for straightforward installation with no drilling or modification.
- Steel structural components and dense elastomer aim to restore powertrain stability and reduce noise and vibration.
- Some reviews report inconsistent thread quality and occasional premature failures on specific parts.
- Fitment is specific to 2009–2014 Fit 1.5L automatic models and will not work with manual-transmission or other Fit generations.
Verdict: A direct-fit, factory-style 4-piece mount kit that restores chassis stability and cuts cabin vibration for 2009–2014 Honda Fit 1.5L automatic models.
3. zaygyize 3-Piece Engine and Transmission Mount Kit for 2007-2008 Honda Fit 1.5L Automatic
| Compatible Models | 2007-2008 Honda Fit 1.5L Automatic |
|---|---|
| Included Parts | Front right motor mount, rear motor mount, transmission mount |
| Manufacturer | zaygyize |
| Item model number | QF1K0133 |
This three-piece kit supplies the front right motor mount, rear motor mount, and transmission mount needed to replace worn mounts on a 2007–2008 Honda Fit 1.5L automatic. Installation is the typical bolt-on swap for engine and transmission mounts and is commonly done during routine engine work or when vibration and noise increase. The listing includes multiple part numbers that match common factory replacements, which helps confirm fitment before buying. In use the components aim to stabilize the engine, reduce driveline vibration, and quiet cabin noise compared with degraded mounts. The kit is positioned as a durable, budget-focused option and appears to offer straightforward fit without modification. Limitations are that you must verify the part numbers against your vehicle and expect aftermarket materials and finish that may not match higher-end factory-quality replacements; long-term durability can vary with driving conditions. For someone replacing all mounts at once, this kit is a convenient, cost-conscious solution that restores support and reduces engine movement.
Best for: Practical optimizers who want a complete, affordable replacement kit to restore ride comfort and reduce vibration without overspending on premium parts.
Less Ideal for: Buyers seeking a factory-quality or performance-grade mount for high-mileage, heavy-duty use should consider higher-end alternatives tailored to longevity or track use.
- Includes the three commonly replaced mounts (front right, rear, and transmission) for a single purchase
- Lists multiple matching part numbers to help confirm vehicle fitment
- Designed to reduce engine vibration and cabin noise compared with worn mounts
- Economical kit that lets you replace all key mounts at once rather than buying individually
- Aftermarket construction may not match long-term durability of higher-end factory-quality mounts
- Fitment still requires checking part numbers or VIN confirmation before purchase
Verdict: A cost-effective, three-piece mount kit that restores engine stability and reduces vibration for 2007–2008 Honda Fit 1.5L automatics if you confirm part-number fitment.
4. X AUTOHAUX Front Right Upper Engine Torque Strut Mount for Honda Fit 2007-2008
| Compatible models | Honda Fit 2007-2008 |
|---|---|
| OE part number | 50826-SEL-E01 |
| Material Type | Metal, Rubber |
| Mounting Type | Chassis Mount |
This X AUTOHAUX front right upper engine torque strut mount is a budget replacement intended to restore engine damping and eliminate the clunk or heavy vibration when shifting or accelerating. It installs as a direct chassis-mounted replacement and uses a metal body with rubber inner components to absorb torque and reduce driveline shock. Typical use is a DIY swap for a worn or broken factory mount on a 2007–2008 Honda Fit; customers report it reduces noise and vibration immediately after installation. Notable features include a durable metal construction and a bolt pattern that matches the factory M11x1.25 bottom bolt for a bolt-on replacement. Practical benefits are lower cost and straightforward fitment for many 2007–2008 Fits and improved NVH compared with a failed unit. Limitations are that a few buyers had to modify a riveted plate or perform minor drilling for fitment on some transmissions, and long-term longevity may vary compared with higher-end or OEM mounts.
Best for: Budget-conscious Honda Fit owners who prioritize immediate reduction in engine vibration and a low-cost DIY replacement to get their car back to normal operation.
Less Ideal for: Owners seeking an exact factory-quality lifetime replacement or those unwilling to perform minor adjustments should consider higher-end or dealership options instead.
- Lower-cost replacement compared with OEM parts
- Metal body with rubber insert to reduce engine vibration and clunking
- Bolt-on mounting with matching bottom bolt thread M11x1.25 for easier installation
- Ships as a single unit suitable for a straightforward DIY swap
- Some units may require minor modification such as drilling out a riveted plate to fit certain transmissions
- Build quality and long-term durability may be less consistent than higher-priced or factory-quality mounts
Verdict: An inexpensive, straightforward replacement mount that cuts engine vibration and clunking for 2007–2008 Honda Fit models.
5. Torchbeam Engine and Transmission Mount Kit for 2007–2008 Honda Fit (3-piece)
| Vehicle fitment | 2007–2008 Honda Fit |
|---|---|
| Included pieces | Front right motor mount, rear motor mount, transmission mount |
| OEM numbers referenced | AM500, A4537, EM9437 |
This Torchbeam kit provides the three primary mounts most commonly replaced on a 2007–2008 Honda Fit: the front right motor mount, rear motor mount, and transmission mount. It is built to mirror the factory design and uses metal components intended to improve durability and extend service life. The modular design and rubber sections are intended to absorb engine vibrations and reduce cabin noise, so you should notice smoother idling and less NVH after installation. Installation is typical for direct-replacement mounts and is suitable for DIY mechanics with basic tools or a professional shop. The kit is practical for restoring worn mounts and improving long-term stability, but it is a basic replacement rather than a performance upgrade; it will not eliminate vibration from other drivetrain issues. Fitment is limited to the specified model years and requires matching OEM part numbers for correct placement. If you need a torque-assisted or reinforced performance mount, look elsewhere, but for a reliability-focused restoration this kit covers the main mounting points affordably and with factory-style function.
Best for: Reliability-focused buyers who prioritize restoring factory-like smoothness and reducing cabin vibration on a 2007–2008 Honda Fit without chasing performance upgrades.
Less Ideal for: Drivers seeking hardened performance mounts for aggressive driving or installations on different vehicle years and models should consider alternative reinforced options.
- Three-piece kit replaces front right motor, rear motor, and transmission mounts for one-stop repair
- Designed to match original part layout for straightforward direct replacement fitment
- Modular design and rubber damping help reduce engine vibration and cabin noise
- Constructed from metal components intended to improve durability and service life
- Not a performance or reinforced mount option for high-torque applications
- Fitment limited to 2007–2008 Honda Fit and requires correct OEM part matching
Verdict: A practical, factory-style three-piece mount kit aimed at reliability-focused Honda Fit owners who want to restore smoothness and reduce vibration.
6. PATEWIN Engine Mount Compatible with 2007–2008 Honda Fit 1.5L Automatic Transmission
| Compatibility | 2007-2008 Honda Fit 1.5L Automatic Transmission |
|---|---|
| Manufacturer | PATEWIN |
| Interchange Part No | AM500, A4552, A4537 |
| Construction | Rubber bonded to high-strength steel |
This PATEWIN engine mount is a direct-fit replacement intended for the 2007–2008 Honda Fit 1.5L with an automatic transmission. It replaces worn motor/transmission supports to reduce engine movement, vibration, and clunking during acceleration or gear changes. The part is built with rubber bonded to high-strength steel and claims factory-quality fit and finish for straightforward installation with factory mounting points. Buyers will appreciate that it targets a common cause of cabin vibration and can be installed as a single repair without modifying other components. Practical benefits include quieter operation, improved feel under throttle, and a plug-and-play fit for the specified Fit models. Limitations include mixed reports on long-term durability and occasional manufacturing defects like damaged threads or brittle plastic elements reported by some users, so inspect hardware before installation. A one-year warranty is offered by the seller, but users seeking OEM longevity may prefer factory replacements or higher-end aftermarket options.
Best for: Convenience-driven buyers who want a ready-to-install, vehicle-specific replacement that quickly restores ride comfort without sourcing OEM parts or extensive troubleshooting.
Less Ideal for: Drivers prioritizing long-term OEM-level durability or those who prefer validated heavy-duty aftermarket mounts for high-performance or high-mileage applications should consider alternatives.
- Direct-fit design for 2007–2008 Honda Fit 1.5L automatic for straightforward installation
- Rubber bonded to steel construction aims to reduce vibration and engine movement
- Advertised to meet or exceed factory specifications for fit and finish
- Includes a one-year warranty for replacement if the part fails
- Some users reported manufacturing defects such as damaged threads and plastic failures
- Mixed durability reports compared with OEM mounts
Verdict: A convenient, direct-fit replacement that restores comfort for 2007–2008 Honda Fit owners but inspect parts on arrival due to mixed durability reports.
7. YEOPGYEON Engine Motor Mount Set for Honda Fit 2007–2008 (Set of 3)
| Compatible vehicle | Honda Fit 2007-2008 L4 1.5L Auto Transmission |
|---|---|
| Included parts | AM500 (front right), A4537 (transmission), A4552 (rear) |
| Material | Rubber & Steel |
| Treatment | Heat Treated |
This engine motor mount set replaces the front right, transmission, and rear mounts on a Honda Fit 2007–2008 with the 1.5L automatic. Made from heat-treated steel and rubber, the kit is intended to damp engine movement, lower vibration and noise, and restore the factory mounting geometry for smoother driving. Installation is straightforward for a competent DIYer or a shop using basic tools since the parts are described as direct-fit with no modification required. The set lists multiple interchange numbers so it can match factory locations, and the rubber durometer is tuned for vehicle application to control NVH. Expect improved comfort and reduced engine movement under acceleration, though longevity will depend on driving conditions and installation quality. One limitation is fitment is limited to the specified Fit model years and transmission; also some buyers reported receiving incorrect pieces so checking each part against your old mounts before install is advisable.
Best for: Risk-averse mainstream buyers who prioritize restoring factory-like ride comfort and minimizing vibration after worn mounts, and who prefer a complete kit to replace all major mounts at once.
Less Ideal for: Enthusiasts seeking performance-oriented stiffer mounts or owners of Fits outside the specified years and transmission types should look elsewhere.
- Direct-fit replacement for Honda Fit 2007–2008 automatic 1.5L applications.
- Set includes front right, transmission, and rear mounts so all major engine support points are addressed.
- Heat-treated steel and rubber construction aimed at durable vibration damping.
- Multiple interchange part numbers increase the chance of correct fitment.
- Compatibility limited strictly to 2007–2008 Honda Fit 1.5L automatic; not suitable for other years or transmissions.
- Some buyers reported receiving incorrect-sized pieces, so part verification is necessary before installation.
Verdict: A practical, complete replacement mount kit for 2007–2008 Honda Fit automatics that restores factory-style stability but requires careful part verification on arrival.
Choosing the Right Honda Fit Engine Mount: Key Factors to Consider
Material and Construction
The materials used in an engine mount determine how well it absorbs vibration and withstands wear. Mounts commonly use bonded rubber, hydraulic fluid chambers, or polyurethane; each has tradeoffs in comfort, durability, and noise transfer. Better bonding between rubber and metal reduces the risk of delamination, which can lead to premature failure.
Metal components should resist corrosion and maintain structural integrity under engine torque. Pay attention to the quality of welds, bushings, and fasteners because those details influence long-term reliability and service life.
Vibration Damping Performance
How a mount manages engine vibration affects cabin comfort and perceived refinement. A mount with effective damping reduces harshness from idling, acceleration, and gear changes, improving driver comfort and reducing fatigue on nearby components.
Consider how the mount performs across different RPM ranges and driving conditions. Some designs damp low-frequency shaking better, while others focus on high-frequency noise. Choose a mount that matches the typical use case for your vehicle, such as daily commuting or spirited driving.
Fitment and Compatibility
Accurate fitment is essential to ensure the mount aligns with engine and chassis mounting points. A correct fit minimizes installation time and prevents undue stress on bolts, brackets, and the drivetrain. Even small deviations in hole placement or thickness can affect torque transfer and introduce unwanted movement.
Verify that the mount matches the Honda Fit's model year and engine configuration. Hardware completeness and clear fitment instructions reduce the chance of errors during replacement and help achieve the intended performance.
Durability and Environmental Resistance
Engine mounts face heat, oil, road grime, and mechanical load cycles, so resistance to environmental factors is important. Materials that degrade quickly when exposed to oil or extreme temperatures will shorten service life and lead to repeat replacements.
Look for mounts made from compounds or coatings designed to resist heat cracking, ozone, and chemical exposure. Durable mounts save time and labor over the long run and maintain consistent performance in varied climates.
Noise and Harshness Tradeoffs
Some mounts prioritize isolation and comfort, while others emphasize stiffness for better engine control. Softer mounts reduce noise and harshness but may allow more engine movement, whereas stiffer mounts improve response but can transmit more vibration into the cabin.
Consider the typical driving environment and your tolerance for noise. If cabin quiet is a priority, choose a mount designed for superior damping. If you prioritize drivetrain precision, a firmer mount may be preferable despite slightly higher noise transfer.
Installation and Serviceability
Ease of installation affects total downtime and the likelihood of correct replacement. Mounts that include necessary bolts, bushings, and clear instructions reduce the chance of missing pieces or improper torque. Accessibility of mounting points on the Honda Fit also factors into how complex the job will be.
If you plan to have a technician perform the work, confirm that the mount's design does not require specialized tools. Consider whether future maintenance or removal will be straightforward to minimize labor costs and effort.
How We Chose the Best Honda Fit Engine Mount
To assemble this list we focused on attributes that matter for Honda Fit engine mounts in real-world use. Primary criteria included material quality and construction, since rubber density and metal reinforcement determine longevity and vibration isolation. We also weighed durability under typical city and highway loads, looking at fatigue resistance and resistance to oil or heat degradation.Mount geometry and fitment accuracy were evaluated because correct alignment reduces stress on adjacent components. Noise isolation and vibration damping were assessed to prioritize quieter, smoother operation. Ease of installation and hardware completeness were considered to reflect what drivers can expect during replacement. We excluded items lacking clear fitment data for the Honda Fit or those with insufficient user feedback on longevity. The final selection balances proven materials, reliable vibration control, and practical installation considerations.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common symptoms of a failing engine mount on a Honda Fit?
Common signs include increased vibration at idle, clunking or banging during acceleration or shifting, and engine movement noticeable when revving. You may also detect unusual noise or a change in engine position under load. These symptoms often vary with driving conditions and the mount's degree of wear.
Can I perform an engine mount replacement myself?
Replacing an engine mount is often doable for someone with basic mechanical skills and the right tools, but it depends on access to mounting points and required torque procedures. Some mounts need the engine supported safely during removal. If you are unsure about safe jacking or torque specifications, professional installation is a safer choice.
How long do engine mounts typically last on a Honda Fit?
Lifespan varies with driving style, environment, and mount materials. Many mounts last several years under normal driving, but exposure to oil, harsh climates, or heavy loads can shorten life. Regular inspection for cracking, excessive movement, or fluid leaks helps catch issues before failure.
Will a stiffer mount reduce engine movement but increase vibration?
Yes, firmer mounts generally limit engine movement and can improve throttle response and perceived control. However, they often transmit more vibration and noise into the cabin. Choosing a mount involves balancing the need for control with acceptable levels of comfort.
How can I tell if vibration is caused by the engine mount or another issue?
Start by noting when the vibration occurs. If it is most pronounced at idle or during acceleration and corresponds with visible engine movement, the mount is a likely cause. Other sources include drivetrain components, wheel balance, or suspension issues. A visual inspection and targeted tests, such as supporting the engine to see if vibration changes, can help narrow the cause.
Are there maintenance steps to extend engine mount life?
Regular visual checks for cracks, oil contamination, or excess movement help catch wear early. Avoiding prolonged high-revving and minimizing exposure to oil leaks or contaminants can also extend life. Addressing adjacent component leaks and ensuring correct installation torque reduces undue stress on the mount.
Conclusion
Selecting the right Honda Fit engine mount requires balancing durability, vibration control, and installation practicality. Prioritize mounts with suitable materials and proven damping characteristics for your driving style, and confirm precise fitment to avoid added stress on the drivetrain.Remember that stiffer designs trade comfort for control, while softer mounts favor quietness and isolation. Use the factors above to weigh the tradeoffs and choose the option that best matches how you use your Honda Fit.
Explore More:
- Check out all Honda Fit parts & accessories
- Explore Engine Mounts Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
