Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Honda Accord 3.0L V6 is showing extra vibration or clunking during acceleration and shifting, the engine mounts deserve early attention. The right engine mount keeps the V6 aligned, isolates noise, and protects other drivetrain components from premature wear. This guide covers a shortlist of the top options for this specific 3.0L V6 configuration, focusing on fitment, material durability, and NVH control.Below you will find the picks selected for reliability and real-world performance, followed by the buying criteria we used to evaluate them and practical guidance for installation and symptoms to watch for.
Looking for other parts? See all Honda Accord parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | A-Premium Engine and Transmission Mount Set for Honda Accord V6 3.0L (2003–2007) — 6‑Piece |  |
| Best Quality Built to a higher standard if you want something more solid | AISIN Engine and Transmission Mount Set EMTH-20291 for Honda Accord 2003–2007 V6 3.0L (6‑piece) |  |
| Best Value The sweet spot between price and what you get | JDMON Engine Mount Set (6‑Piece) for Honda Accord 3.0L 2003–2007 |  |
| Best Budget The cheapest option that still gets the job done reliably | StanceMagic 6-Piece Engine Mount Kit for 2003–2007 Honda Accord 3.0L V6 (Automatic) |  |
| Highest Rated A top-rated pick with lots of positive feedback | PATEWIN 6-Piece Engine and Transmission Mount Kit for 2003–2007 Honda Accord 3.0L V6 (Automatic) |  |
| Best Seller A high-volume bestseller chosen again and again | Gdydi Engine and Transmission Mount Kit — 6-Piece for 2003–2007 Honda Accord 3.0L V6 Automatic |  |
1. A-Premium Engine and Transmission Mount Set for Honda Accord V6 3.0L (2003–2007) — 6‑Piece
| Fitment | Honda Accord V6 3.0L 2003–2007 (Coupe or Sedan) EX/LX/EX-L/SE, Gas, Automatic Transmission |
|---|---|
| Kit contents | 6 pieces: front, front right lower, rear engine; front, front upper, rear transmission mounts |
| Manufacturer part number | APEM009MF |
| Reference numbers | A4527HY, A4526HY, A4525, A4544, A4517, A4524, A4566, 9214, 9215, 9220, 9247, 9297, 9451, EM9247, EM9297, EM9451, EM9215, EM9220, EM9214 |
This six-piece mount kit replaces the engine and transmission mounts on 2003–2007 Honda Accord V6 3.0L automatic sedans and coupes and is intended to restore support and reduce vibration. The set includes front, front right lower, rear engine mounts plus front and rear transmission mounts and an upper transmission mount so you can replace all rubber supports at once. Installers will appreciate that parts arrive as a complete kit matched to the V6 automatic application and that the components are shaped to the factory mounting points for a direct-fit replacement. In use the mounts generally quiet engine shake and improve ride comfort compared with badly degraded originals, and many buyers report simple installation and good value. Some customers note variability in rubber hardness and missing vacuum fittings on the rear unit which can affect NVH if your car relied on that feature, so careful inspection before install is wise. The kit is a cost-effective option for owners who want to refresh all mounts in one job but may not match factory materials in every detail.
Best for: Buyers who want an affordable, all-in-one replacement to restore engine support and reduce vibration across a 2003–2007 Accord V6 with automatic transmission and prefer to do one comprehensive mount service.
Less Ideal for: Drivers seeking exact factory-match material properties or those who require mounts with specific vacuum fittings for emissions or vacuum‑fed components should consider OEM replacements or single-piece factory options.
- Complete six-piece kit covers engine and transmission mounts so you can replace all supports in one service visit
- Direct-fit shapes intended for 2003–2007 Accord V6 automatic models reduce modification and alignment work
- Many users report noticeable reduction in vibration and improved cabin comfort after installation
- Good value compared with buying individual OEM mounts separately
- Material quality and rubber hardness vary between units which may produce inconsistent vibration control
- Some rear units reported missing vacuum port that certain applications expect
Verdict: Choose this kit if you want an affordable, complete replacement set to restore engine support and significantly reduce vibration on a 2003–2007 Accord V6 automatic in a single install.
2. AISIN Engine and Transmission Mount Set EMTH-20291 for Honda Accord 2003–2007 V6 3.0L (6‑piece)
| Compatibility | Honda Accord 2003-2007 V6 3.0L |
|---|---|
| Quantity | 6 pieces |
| Mount material | Aluminum, Rubber, Steel |
| Type | Hydraulic / Solid |
This six-piece Aisin mount kit replaces the front, front-right, rear engine mounts and the transmission mounts to restore engine stability and reduce vibration in a 2003–2007 Honda Accord V6 3.0L. Designed as direct replacements, the mounts combine aluminum, rubber and steel with hydraulic and solid designs where appropriate to absorb idle and road vibrations while keeping driveline alignment tight under load. Installation is intended to be straightforward for a technician familiar with engine/transmission support since the parts are made to match factory mounting points and use welded joints to resist loosening. For performance-minded drivers, these mounts will tighten up engine movement compared with worn originals, improving shifting feel and throttle response feedback without introducing excessive harshness. Limitations are that this is a replacement kit rather than an aftermarket stiffer performance set, so if you are seeking very firm or race-focused mounts there are firmer specialty options; also replacing all six mounts requires time and mechanical access to several mounting points which may need a lift and basic press tools for safe removal and installation.
Best for: Buyers who want to restore factory-like engine stability and vibration control in a 2003–2007 Accord V6 and prioritize reliable, factory-quality replacements over ultra-stiff performance mounts.
Less Ideal for: Drivers building a track or race-focused Accord who want very firm aftermarket or polyurethane mounts should look at specialty performance options instead.
- Complete six-piece kit covers engine and transmission mounts for a full replacement
- Made from aluminum, rubber and steel with hydraulic/solid designs to balance vibration isolation and control
- Built to fit factory mounting points for straightforward direct replacement and stable welded joints
- Not a performance-stiff aftermarket mount set so it will not deliver race-level rigidity
Verdict: If you need a complete, factory-quality replacement to regain engine control and reduce vibration on a 2003–2007 Accord V6, this Aisin six-piece kit is the practical choice.
3. JDMON Engine Mount Set (6‑Piece) for Honda Accord 3.0L 2003–2007
| Fitment | 2003–2007 Honda Accord 3.0L |
|---|---|
| Included components | 6Pcs Engine Mounts |
| Material type | Iron, Aluminum, Rubber |
This JDMON kit supplies all six engine and transmission mounts needed when replacing worn mounts on a 2003–2007 Honda Accord 3.0L. The set includes front and rear engine mounts plus transmission mounts so you can restore engine positioning and dampening in one service session rather than sourcing parts individually. Construction mixes iron, aluminum, and rubber with a powder coated finish intended to resist corrosion. In use the rubber elements absorb vibration and reduce drivetrain noise, and the standardized design is meant to bolt in without complex adjustments, which speeds installation for DIY mechanics or a shop. Expect improved cabin comfort and steadier engine behavior under load compared with degraded mounts. Limitations to note are typical of aftermarket multi-piece kits: fit depends on correct part numbers and careful installation, and longevity can vary with driving conditions compared with higher-end replacement options.
Best for: Buyers who want a practical, all-in-one replacement to restore ride comfort and engine stability on a 2003–2007 Honda Accord 3.0L and prefer minimizing parts sourcing and shop time.
Less Ideal for: Drivers seeking the highest-performance or longest-lasting factory-quality mounts for heavy-duty use should consider premium or OEM-level alternatives.
- Complete six-piece kit lets you replace all engine and transmission mounts at once
- Standardized design aims for direct bolt-on installation to reduce labor time
- Rubber dampers reduce engine vibration and cabin noise
- Metal components are powder coated to resist corrosion
- Durability and long-term life can vary versus premium factory-quality mounts
Verdict: A convenient six-piece replacement kit that gets a 2003–2007 Accord 3.0L back to smooth, quieter operation with minimal parts hunting.
4. StanceMagic 6-Piece Engine Mount Kit for 2003–2007 Honda Accord 3.0L V6 (Automatic)
| Compatibility | 2003–2007 Honda Accord 3.0L V6, Automatic transmission |
|---|---|
| Material Type | Alloy Steel |
| Bushing Material | Rubber |
| Unit Count | 6 |
This six-piece mount kit replaces the front, rear and transmission mounts on 2003–2007 Honda Accord 3.0L V6 cars with automatic transmissions. Each part is steel-bodied with rubber bushings and is sold as direct-fit replacements for the listed factory locations, so installation restores the engine and transmission support without modifying the car. The mounts are described as solid, non-hydraulic units and are heat treated for strength, which helps reduce engine movement, vibration, and drivetrain noise compared with badly worn originals. Because instructions are not included, professional installation is recommended; a shop can also confirm torque values and alignment. These are aftermarket parts rather than factory-branded mounts, so buyers get a lower-cost option that aims to meet factory-level form and function, but long-term performance can vary versus higher-end or hydraulic mounts. The kit is practical for a full replacement job and includes the specific pieces needed to address common vibration and shifting feel caused by degraded mounts.
Best for: Buyers replacing worn mounts on a 2003–2007 Accord V6 who prioritize a complete, cost-conscious repair that restores engine stability without upgrading to premium or hydraulic mounts.
Less Ideal for: Owners seeking the highest factory-like refinement or those who prefer OEM-branded hydraulic mounts for the softest vibration control should consider higher-end or factory replacements instead.
- Complete six-piece set covers front, rear, and transmission mount positions for a full replacement job
- Steel construction with heat treatment aimed at strength and durability
- Rubber bushings replicate factory vibration isolation to reduce engine noise and shake
- Direct-fit design for the specified Accord 3.0L V6 automatic application simplifies installation
- Aftermarket non-hydraulic design may not match the ride refinement of factory hydraulic mounts
- No installation instructions included so professional fitting is recommended
Verdict: A budget-friendly, full six-piece mount kit that gives a straightforward direct-fit replacement to restore engine and transmission support on 2003–2007 Accord 3.0L V6 automatics.
5. PATEWIN 6-Piece Engine and Transmission Mount Kit for 2003–2007 Honda Accord 3.0L V6 (Automatic)
| Vehicle fitment | 2003–2007 Honda Accord 3.0L V6 (Automatic) |
|---|---|
| Set contents | 6 pieces: front hydraulic, front right, rear hydraulic, and 3 transmission mounts |
| Material type | Rubber with steel brackets |
| Manufacturer | PATEWIN |
| Model number | 1K0011-1 |
This PATEWIN kit supplies all six primary engine and transmission supports needed to overhaul the powertrain mounts on a 2003–2007 Accord 3.0L V6 with an automatic transmission. The set includes two hydraulic mounts (front and rear) with a vacuum pin for improved damping, plus the passenger-side mount and three transmission mounts to reseat the drivetrain and stop engine pitch, clunks, and steering-wheel tremors. Install typically requires engine support and moderate mechanical skill because access to the rear mount is tight, but the parts are built from steel brackets bonded to dense rubber or hydraulic elements for factory-style fit and NVH control. Buyers report straightforward fitment when the vehicle and transmission type match, and the complete kit avoids sourcing separate pieces. The limitations are that the kit is only for the 3.0L V6 automatic Accord and will not fit manual-transmission or 2.4L models, and some users note minor excess rubber flash that may require light trimming before installation.
Best for: Buyers who prioritize restoring reliable, factory-quality powertrain stability on a 3.0L V6 Accord and want a full set to replace all worn mounts in one job.
Less Ideal for: Drivers with manual transmissions, 2.4L four-cylinder Accords, or anyone seeking a single-piece, temporary repair rather than a full mount overhaul.
- Complete six-piece kit covers front, front-right, rear engine mounts and three transmission mounts for a full powertrain refresh.
- Includes hydraulic front and rear mounts with vacuum pin to better absorb automatic-transmission shocks and reduce idle vibration.
- Steel mounting brackets and bonded elastomer elements designed for direct factory-quality fit and drivetrain alignment.
- Addresses common symptoms like engine pitching, clunking and steering-wheel tremor by stabilizing the engine and transmission.
- Fitment limited to 2003–2007 Accord 3.0L V6 with automatic transmission and not compatible with manual or 2.4L models.
- Installation can be tight and requires engine support plus intermediate mechanical skill; some trimming of excess rubber flash may be needed.
Verdict: If you need a reliable, factory-style full mount replacement to eliminate vibration and restore drivetrain alignment on a 2003–2007 Accord 3.0L V6 automatic, this complete six-piece kit is a practical one-stop solution.
6. Gdydi Engine and Transmission Mount Kit — 6-Piece for 2003–2007 Honda Accord 3.0L V6 Automatic
| Compatible models | 2003–2007 Honda Accord 3.0L V6 automatic |
|---|---|
| Unit count | 6 pieces |
| Finish type | Powder Coated |
| Manufacturer | Gdydi |
This Gdydi kit supplies the full set of engine and transmission mounts needed when replacing worn mounts on a 2003–2007 Honda Accord 3.0L V6 with an automatic transmission. It includes front, front-right and rear engine mounts plus three transmission mounts so you can replace all wear points at once rather than diagnosing and sourcing individual parts. The mounts are powder coated for corrosion resistance and the listing notes material strength aimed at longer service life. For DIYers the package simplifies installation because you get every mount in one order; several owner reports say the parts fit and reduce idle vibration after installation. Expect a firmer, slightly more vibration-prone feel compared with factory-style mounts since these are aftermarket replacements, and long-term durability is still dependent on installation technique and driving conditions. The kit is best for buyers who want a complete, cost-effective replacement to restore drivability without buying individual OEM pieces.
Best for: Buyers who prefer a low-risk, straightforward repair solution and want to replace every engine- and transmission-mount at once to eliminate vibration and avoid repeat troubleshooting.
Less Ideal for: Drivers seeking an exact factory-matched feel or the highest OEM longevity should consider factory replacement parts or dealer-sourced mounts instead.
- Complete six-piece set replaces all engine and transmission mounts together for one-stop repair
- Powder coated finish provides corrosion resistance for longer outdoor life
- Designed specifically for 2003–2007 Accord 3.0L V6 automatic so fitment matches common failure points
- Reduces engine shake and idle vibration when worn mounts are replaced
- Includes both motor and transmission mounts to avoid multiple orders and compatibility issues
- Aftermarket feel can be firmer than factory mounts, so some additional vibration may be noticeable
- Long-term longevity may vary compared with factory-quality parts depending on driving and installation
Verdict: If you need a practical, all-in-one replacement to stop vibration on a 2003–2007 Accord 3.0L V6, this six-piece mount kit provides a complete, cost-effective repair.
Choosing the Right Honda Accord 3.0L V6 Engine Mount: Key Factors to Consider
Material and Mount Type
Mount construction material strongly affects how vibration is transmitted to the chassis. Rubber-bonded mounts offer better NVH isolation for daily driving, while stiffer inserts or hydraulic mounts can reduce movement but may increase transmitted vibration. For the Accord 3.0L V6, consider whether you prioritize comfort or reduced engine movement under load.
Different mount types age differently. Rubber degrades from heat and oil exposure, and hydraulic mounts can leak or lose damping over time. Choosing the right material and mount type influences service life and the tradeoff between comfort and control.
Fitment and Alignment Accuracy
Correct fitment ensures bolt holes, bracket geometry, and engine clearance match the vehicle without forcing components into misalignment. Poorly fitting mounts can cause stress on the engine cradle, driveline, and transmission, accelerating wear and creating additional vibration.
Look for mounts manufactured to the vehicle's factory dimensions with consistent machining and clear fitment references for the 3.0L V6. Accurate alignment reduces installation time and lowers the risk of post-install troubleshooting.
Durability and Environmental Resistance
Engine mounts must withstand engine heat cycles, road salts, and occasional oil or coolant exposure. Materials and coatings that resist corrosion and degradation increase service intervals and reduce the chance of sudden failure. For the Accord 3.0L V6, consider mounts with corrosion-resistant brackets and rubber compounds rated for heat retention.
Durability influences long-term ownership costs and how frequently mounts must be inspected or replaced. A more robust mount can be particularly advantageous if the vehicle sees heavier loads or more aggressive driving.
NVH Performance
Noise, vibration, and harshness control is a key reason owners replace mounts. A mount that isolates idle vibration and reduces clunking during gear changes improves perceived vehicle quality. For the V6 Accord, NVH performance affects cabin comfort especially at idle and low speed maneuvers.
Consider how different designs handle engine movement and resonance. Some mounts reduce high-frequency vibration better than low-frequency torque-induced movement, so think about the primary symptoms you want to address.
Installation Complexity and Serviceability
Installation requirements vary by mount and by whether the engine must be supported or partially removed. Some mounts can be replaced with the engine supported from above using a jack and block, while others require more extensive disassembly or special tools. For DIYers, straightforward bolt-on replacements reduce labor time and potential for error.
Serviceability also includes availability of replacement bolts, bushings, or inserts. Mounts designed with replaceable components can lower long-term maintenance costs and simplify repairs.
Warranty and Manufacturer Support
A clear warranty gives confidence in durability and manufacturing quality. Consider the length and scope of coverage, and whether the vendor provides clear return or replacement policies for fitment issues. Good technical support or detailed installation instructions helps avoid installation mistakes and shortens troubleshooting time.
Warranty coverage is a tie-breaker when multiple mounts meet your fitment and performance needs, especially for owners who plan to keep the vehicle long term.
Common Symptoms That Indicate Mount Replacement
Several clear signs point to deteriorating engine mounts on the Honda Accord 3.0L V6. Excessive engine vibration felt through the floorboard or steering wheel at idle and during acceleration is a primary indicator. Clunking or banging sensations during shifts or sudden throttle changes often mean the mount is allowing excessive engine movement.
Other symptoms include visible rubber cracking, oil saturation of mount components, or engine misalignment that causes unusual driveline angles. Paying attention to when the symptoms appear helps you isolate whether the mount is the likely cause or whether related components require inspection.
- Increased vibration at idle or low RPM
- Clunking during acceleration, deceleration, or gear changes
- Visible rubber cracks or separation
- Engine tilting or sagging under load
DIY Vs Professional Replacement: What to Expect
Replacing an engine mount on the Accord 3.0L V6 can be handled by experienced DIYers with the right tools and a safe engine support method. Typical tasks include raising and supporting the engine, removing mount bolts in a defined sequence, and installing the new mount while ensuring proper torque and alignment. Some mounts require partial intake or accessory removal for access.
Professional installation reduces the risk of alignment errors and often includes torque verification. When labor costs and access needs are considered, factor in whether you have a safe lift or reliable support equipment before attempting the job yourself.
- DIY requires proper engine support and torque tools
- Some mounts need partial disassembly for access
- Professionals offer alignment checks and torque verification
Torque Values and Fastening Best Practices
Proper bolt torque is critical to ensure the mount clamps securely without distorting the bracket or causing stress concentrations. Use the manufacturer-recommended torque specifications for the Accord 3.0L V6 mounting bolts and follow a cross-tightening pattern when applicable to seat the component evenly. Replacing fasteners with grade-equivalent hardware is important if old bolts show wear.
Always clean the mounting surfaces, inspect bolt threads for damage, and apply anti-seize or thread locker only where specified. After installation, recheck torque values following a short break-in period or after the first few hundred miles of normal driving.
- Follow factory torque specs and tightening sequence
- Inspect and replace worn fasteners with equivalent grade
- Clean mating surfaces before installation
Addressing Related Components During Replacement
When replacing mounts, inspect nearby components that are affected by engine movement. Look at transmission mounts, exhaust hangers, and drive shaft boots for signs of stress or wear that might have resulted from a failing engine mount. Replacing multiple mounts at once can restore correct geometry and reduce long-term vibration issues.
Also check for fluid leaks that may have contributed to rubber degradation, as oil or coolant can accelerate mount failure. Addressing these contributing issues at the time of mount replacement reduces the likelihood of repeat failures.
- Inspect transmission mounts and exhaust hangers
- Check drive shaft boots and CV joints for stress
- Look for fluid leaks that could degrade mount rubber
Maintenance Tips to Extend Mount Life
Regular visual inspections under the hood can catch early signs of mount degradation before they affect other components. Look for rubber cracking, separation from the metal bracket, or oil saturation. Addressing leaks and replacing worn accessory seals reduces exposure to fluids that harm mount materials.
Avoid prolonged high-RPM load or aggressive launch maneuvers that put excessive stress on mounts. If you tow or frequently carry heavy loads, consider inspecting mounts more frequently as the extra stress can shorten service life.
- Inspect mounts during routine service intervals
- Fix nearby fluid leaks promptly
- Limit aggressive launches and heavy towing when possible
Still looking for the perfect fit?
Select your Honda Accord configuration to see the most relevant Engine Mounts recommendations
How We Chose the Best Honda Accord 3.0L V6 Engine Mount
We prioritized mounts that deliver correct fitment for the Honda Accord 3.0L V6 and demonstrated durable construction suitable for typical daily driving and occasional spirited use. Our evaluation emphasized materials and design features that affect longevity and vibration isolation, such as bonded rubber compounds, reinforced brackets, and hydraulic or solid insert designs. We also considered manufacturing tolerances and how well the mounts maintain engine alignment under load, since misalignment can accelerate wear on drivetrain components.Additional criteria included ease of installation for technicians and experienced DIYers, availability of replacement hardware or bushings, and the clarity of fitment documentation. We excluded carriers that lacked explicit 3.0L V6 Accord compatibility or that used vague fitment claims. We did not include mounts intended only for racing applications that sacrifice isolation for extreme stiffness. Overall, chosen products balance vibration control, structural strength, and practical installation considerations relevant to this vehicle.
Our full evaluation process is outlined in our review methodology.
FAQ
How long do engine mounts typically last on the Accord 3.0L V6?
Engine mounts often last many years under normal driving, typically failing due to age, heat, or fluid exposure. Lifespan depends on driving habits and environmental factors, so inspect them periodically and after incidents that stress the engine.
Can I drive with a bad engine mount?
You can drive short distances with a failing mount, but prolonged use can cause additional wear to the transmission, exhaust, and driveline components. Addressing a bad mount promptly reduces the risk of secondary damage.
What are the risks of not replacing a worn engine mount?
A worn mount allows excessive engine movement, which can lead to misaligned driveline components, accelerated wear on transmission mounts, and increased vibration transmitted to the cabin. It can also cause stress on hoses and wiring routed near the engine.
Should I replace multiple mounts at once on my Accord?
Replacing multiple mounts at the same time is often recommended if several show age-related wear, because mounts age concurrently. Swapping only the visibly failed mount may leave the vehicle with uneven support and continued NVH issues.
Are hydraulic mounts better than solid rubber for this vehicle?
Hydraulic mounts can offer superior damping for certain vibration frequencies, improving comfort at idle and low speed. However, they may be more complex to manufacture and can fail differently than solid rubber mounts. The best choice depends on your priorities for comfort versus minimizing engine movement.
Final Verdict
Prioritize fitment accuracy and NVH performance when choosing engine mounts for the Honda Accord 3.0L V6. Durable materials and correct torque procedures help ensure the mount isolates vibration while maintaining proper engine alignment. If you notice persistent vibration, clunks, or visible mount damage, address the issue promptly and consider inspecting related components at the same time.Balance comfort and control based on how you use the vehicle: softer mounts favor a quieter cabin, while firmer designs reduce engine movement. Use the evaluation criteria above to choose the option that aligns with your driving needs and service preferences.
Explore More:
- Check out all Honda Accord parts & accessories
- Explore Engine Mounts Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
