Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Replacing a worn engine mount can noticeably reduce vibration, noise, and drivetrain movement in your Honda Accord. You want a solution that restores smoothness, maintains alignment, and lasts through everyday driving conditions. This guide presents the shortlisted top picks for Honda Accord engine mounts and explains the factors we used to evaluate them, including fitment accuracy and material durability. Read on to see which options match your needs and the considerations to keep in mind when selecting a replacement.
Looking for other parts? See all Honda Accord parts & accessories.
Top Picks at a Glance
1. Gdydi Engine and Transmission Mount Kit (6‑Piece) for 2003–2007 Honda Accord 3.0L Automatic
| Compatible vehicles | 2003-2007 Honda Accord 3.0L V6 automatic (LX EX SE) |
|---|---|
| Unit count | 6 pieces |
| Finish type | Powder Coated |
| Manufacturer | Gdydi |
This six-piece mount kit replaces the front, front-right, rear engine mounts and three transmission mounts for 2003–2007 Honda Accord 3.0L V6 automatics so you can service the whole mounting system at once. The parts are powder coated for corrosion resistance and come as a matched set intended for DIY installation or shop replacement. In practice this kit makes it easy to eliminate engine vibration and driveline movement by swapping worn rubber mounts with new units; several buyers report a noticeable reduction in idle vibration after installation. The matched set approach saves time hunting individual part numbers and can be cheaper than buying mounts separately. Expect aftermarket feel compared with factory-quality mounts so you may notice slightly firmer NVH characteristics. Also the kit replaces all mounts regardless of which one failed, so it is more of a comprehensive repair than a targeted fix for a single damaged mount.
Best for: Reliability-focused buyers who want a one-time, comprehensive fix for an aging engine/transmission mounting system and prefer replacing the whole set instead of patching individual mounts.
Less Ideal for: Owners seeking a single exact-factory replacement for one failed mount or those who prioritize a factory-soft ride over long-term durability should consider alternatives.
- Complete six-piece kit covers all engine and transmission mounts for the specified Accord V6, simplifying a full replacement
- Powder coated finish helps resist rust for longer service life in typical road conditions
- Sold as a matched set which reduces time spent identifying individual part numbers and ensures consistent fitment
- Multiple buyers report reduced engine vibration after installation, indicating effective damping improvement
- Aftermarket construction can feel firmer than factory mounts, which may increase perceived vibration or harshness
- Meant specifically for the 3.0L V6 automatic Accord and not compatible with 2.4L or 3.2L engines
Verdict A budget-friendly matched six-piece mount kit that restores stability and reduces vibration on 2003–2007 Accord 3.0L V6 automatics, with firmer aftermarket feel compared to factory mounts.
2. A-Premium Engine and Transmission Mount Kit for Honda Accord V6 3.0L 2003–2007 (6-piece)
| Vehicle Fitment | Honda Accord V6 3.0L 2003–2007 (LX/EX/SE, Automatic) |
|---|---|
| Kit Configuration | 6 pieces (engine and transmission mounts) |
| Manufacturer Part Number | APEM009MF |
This six-piece mount kit replaces the engine and transmission mounts on Honda Accord V6 3.0L models from 2003 through 2007 (automatic transmission, LX/EX/SE). The set includes front, front right lower, rear motor mounts and three transmission mounts so you can refresh all rubber-to-metal mounting points in one job. In use the mounts are intended to absorb engine vibration and reduce drivetrain noise for a smoother ride compared with worn or failing mounts. Buyers report straightforward fitment and a cost advantage over dealer parts, making it a practical DIY option for routine maintenance. Construction aims for a precise fit, but some users noted differences from factory parts such as missing vacuum fittings or firmer rubber that can change NVH behavior. Because this is a full kit, installation typically requires moderate mechanical skill and basic tools or a shop visit to torque and align components correctly. The kit is a convenient, budget-oriented solution to restore mounting support, though durability and exact factory match may vary part to part.
Best for: Convenience-driven buyers who want a single kit to replace all engine and transmission mounts at once and prefer a straightforward, budget-friendly repair they can install or have fitted in one service visit.
Less Ideal for: Drivers seeking exact factory-spec replication or those who need guaranteed OEM-matching hardware for high-mileage or performance vehicles should consider factory-quality replacements instead.
- Complete six-piece kit covers engine and transmission mounts so you can replace all major mounting points at once
- Designed for direct fit on Honda Accord V6 3.0L 2003–2007 LX/EX/SE automatic models
- Lower cost than dealer or OEM individual mounts, making it cost-effective for DIY repairs
- Aims to reduce engine vibration and drivetrain noise compared with worn mounts
- Some reviewers reported material differences from factory mounts such as missing vacuum ports or firmer rubber that can affect vibration
- Mixed long-term durability reports mean performance may vary by part and driving conditions
Verdict A convenient, budget-friendly full mount kit that restores engine support on 2003–2007 Accord V6s but may not match factory parts in every detail.
3. Dngbymx Engine Motor Mount Set for Honda Accord 2.4L (2013–2017)
| Compatible Engines | 2.4L Honda Accord (2013-2017) |
|---|---|
| Kit Pieces | 5 pieces (front, front-right, rear, upper and lower transmission mounts) |
| Manufacturer | Dngbymx Auto Parts |
This five-piece motor mount kit replaces the front, front-right, rear, upper transmission, and lower transmission mounts on the 2.4L Honda Accord (2013–2017). The components are made from iron, aluminum and rubber and are intended to restore engine stability and reduce vibration compared with worn mounts. Typical use is a full mount refresh during a repair or while chasing reduced drivetrain movement and improved shift feel. Buyers report straightforward installation and noticeably smoother idle and reduced vibration after fitment. The kit lists factory replacement part numbers so it targets direct-fit swapouts, and the included range covers all the major mount positions you would replace at once to avoid mismatched wear. Limitations to expect are slightly different fit and heavier or lighter feel compared with factory parts and potential minor fitment tweaks during installation since these are aftermarket components rather than factory-sourced units.
Best for: Performance-oriented owners who want to restore engine control and reduce drivetrain movement for sharper throttle response and smoother shifting while prioritizing quality replacements over lowest cost.
Less Ideal for: Drivers seeking exact factory-spec feel or brand-new OEM parts for guaranteed identical fit should consider purchasing manufacturer-original mounts instead.
- Complete five-piece kit covers all main engine and transmission mount positions for a single install
- Constructed from metal and rubber to restore engine stability and reduce vibration
- Replaces known Honda part numbers for targeted compatibility with 2013–2017 Accord 2.4L
- Many users report easier installation and immediate improvement in NVH and shift feel
- Aftermarket fit may require minor adjustments and is not identical to factory mounts
- Material and weight differ from factory parts which can change NVH subtly
Verdict A complete aftermarket mount kit that restores engine stability and reduces vibration for 2013–2017 Accord 2.4L owners who prioritize performance improvements over exact factory match.
4. A-Premium Front Right Engine Motor Mount for Honda Accord & Acura TLX (Passenger Side)
| Location | Front Right, Passenger Side |
|---|---|
| Type | Engine Motor Mount |
| Material | Steel, Rubber |
| Mounting Holes | 4 |
This engine motor mount is a direct-fit passenger-side replacement for select Honda Accord (2013–2017 2.4L and 2014–2015/2017 2.0L hybrid variants) and Acura TLX (2015–2020 2.4L). It installs where the factory mount supports the engine and isolates vibration, using a steel-and-rubber construction and four mounting holes for a straightforward bolt-on swap. For routine repairs this part provides the core function you need: stabilizing the powertrain, reducing cabin vibration, and restoring smoother idle and low-speed driving feel. The design is simple and built to match the referenced factory part numbers for fitment, which helps simplify installation when accessed from the engine bay. Expect solid basic performance at a budget price, but note this is a value aftermarket option rather than a premium or performance mount and may not offer the same longevity or refined vibration damping as higher-end replacements. The one-year unlimited-mileage guarantee offers short-term reassurance, but long-term durability will depend on driving conditions and installation quality.
Best for: Budget-conscious owners looking for an affordable, straightforward replacement to restore engine support and reduce vibration on their Honda Accord or Acura TLX without seeking premium noise isolation.
Less Ideal for: Owners seeking a long-term OEM-equivalent upgrade or enhanced performance/isolated NVH should consider higher-spec factory-quality or premium aftermarket mounts instead.
- Direct-fit replacement for specified Honda Accord and Acura TLX four-cylinder models, matching factory reference numbers
- Steel and rubber construction provides basic vibration isolation and engine support
- Simple four-bolt mounting makes it suitable for typical DIY or shop replacement
- Backed by a one-year unlimited-mileage guarantee for short-term confidence
- Aftermarket budget part may not match the long-term durability or refined damping of higher-end factory-quality mounts
Verdict A cost-conscious, direct-fit passenger-side replacement that restores basic engine support and vibration control for compatible Honda Accord and Acura TLX models.
5. iKer 6‑Piece Engine and Transmission Mount Set for Honda Accord 3.0L (2003–2007)
| Compatible models | Honda Accord 3.0L 2003–2007 |
|---|---|
| Unit count | 6.0 Count |
| Mounting type | Floor Mount |
| Manufacturer | iKer |
This six-piece mount set replaces the engine and transmission mounts on Honda Accord 3.0L models from 2003 through 2007 and is intended to restore proper engine positioning and reduce vibration. The kit includes front and rear motor mounts plus transmission mounts and uses a mix of metal and rubber components to absorb engine movement and isolate noise. Typical use is a full mount refresh during mid-life engine repairs or when vibration and drivetrain movement become noticeable. Buyers will appreciate that the set covers all mounting points so you can replace everything at once instead of mixing old and new mounts. Limitations to expect are variable fitment quality and longevity compared with higher-cost factory-quality parts and the occasional report of premature failure; some buyers also noted differences in finish and hardware compared with dealer parts. This kit is a practical way to address vibration and alignment issues affordably, but installers should inspect included hardware and be prepared to torque and align mounts during installation.
Best for: A risk-averse mainstream buyer looking for a straightforward, full replacement to eliminate vibration and restore normal engine behavior without sourcing multiple individual parts.
Less Ideal for: Buyers seeking exact factory-quality parts with the longest service life or those who prefer dealer-sourced components should consider OEM replacements instead.
- Complete six-piece kit covers all engine and transmission mounting points for a single repair job.
- Uses metal and rubber construction to dampen vibration and reduce engine noise transmission to the cabin.
- Matches common replacement part numbers for the 3.0L Accord so installers can swap mounts without custom modification.
- Includes multiple mounts in one package which saves time and ensures even wear across mounting points.
- Not guaranteed to match factory-quality longevity; some users report earlier wear compared with OEM parts.
- Fit and finish can vary so additional hardware or adjustment may be required during installation.
Verdict A cost-effective all-in-one mount kit for restoring engine stability on 2003–2007 Accord 3.0L cars, but it may not match OEM durability.
6. Gdydi Engine and Transmission Mount Kit for 2003–2007 Honda Accord 2.4L (Set of 6)
| Compatibility | 2003–2007 Honda Accord 2.4L automatic |
|---|---|
| Unit Count | 6.0 Count |
| Finish Type | Powder Coated |
| Model | Engine Motor and Transmission Mount Kit for 2003-2007 Accord 2.4L |
This Gdydi kit supplies the common replacement mounts needed when worn or broken mounts cause vibration, noise, or drivetrain movement on a 2003–2007 Accord 2.4L automatic. The set includes three engine supports and three transmission supports so you can replace all worn mounts at once rather than diagnosing a single failed piece. Parts are powder coated and claimed to meet or exceed factory component standards, so they install and function like standard replacement mounts to restore engine stability and reduce idle vibration. Buyers report the kit is straightforward to fit using basic garage tools and jacks without a lift. Expect a cost advantage over dealer parts, but a few users note the feel is not identical to factory originals and minor extra vibration can remain. The kit is practical for owners wanting a full replacement set to eliminate guesswork, but professional installation or careful engine support is recommended to avoid alignment issues during swap-out.
Best for: Practical optimizers who prioritize getting a full, cost-effective replacement set to restore comfort and drivability while avoiding repeated trips to buy individual mounts.
Less Ideal for: Those seeking an exact factory feel or the highest-end performance mount should consider higher-spec aftermarket or OEM single-piece replacements instead.
- Complete set covers both engine and transmission mounts so you can replace all worn mounts at once
- Powder coated finish and factory-style design intended to meet or exceed original performance
- Reported to fit 2003–2007 Honda Accord 2.4L automatic without modification
- Lower cost than dealership parts when replacing multiple mounts
- Not identical to factory mounts so some users report slightly more vibration compared to OEM
- Includes multiple pieces so installation typically requires engine support and more time than a single mount swap
Verdict A budget-friendly full replacement kit that restores engine stability for 2003–2007 Accord 2.4L owners who want practicality over factory-perfect feel.
7. ENA Engine and Transmission Mount Set (6) for Honda Accord 2.4L 2003–2007
| Vehicle fit | Honda Accord 2003–2007 2.4L automatic |
|---|---|
| Set | Set of 6 |
| Mount material | Rubber |
| Manufacturer | ENA |
| Manufacturer Part Number | ENAMMS110006 |
This ENA six-piece mount kit replaces the front, front-right, rear and transmission mounts on a 2003–2007 Honda Accord 2.4L with automatic transmission. It is intended as a direct replacement set so you can remove worn mounts at once to reduce engine movement, vibration and drivetrain clunks. The mounts are rubber construction and come as a complete package of six pieces covering the common wear points, which makes it convenient for a full refresh rather than changing individual pieces. Installers report mostly straightforward fits but occasional alignment tweaks are needed for some transmission mounts, so expect to fit parts loosely and tighten after positioning. Benefits include noticeably quieter starts and smoother shift-to-drive transitions when installed correctly. Downsides are mixed quality reports in a minority of cases and some units needing persuasion or minor adjustment during installation, so plan for basic hand tools and an engine support or jack for safe work.
Best for: Balanced buyers who want a full, cost-effective mount refresh to restore ride comfort and reduce drivetrain vibration without upgrading to performance parts.
Less Ideal for: Those seeking premium OEM-equivalent longevity or performance-focused engine mounts should consider higher-end or factory-quality options instead.
- Complete six-piece kit covers all primary engine and transmission mounts for a single job
- Rubber construction reduces vibration and engine noise when functioning correctly
- Designed for direct replacement on specified Accord 2.4L automatic models to simplify fitment
- Some users report inconsistent quality with occasional cracking or premature failure
- A few transmission mounts may require minor bending or alignment during installation
- Not guaranteed perfect fit every time so installation time can increase if adjustments are needed
Verdict A convenient full-replacement kit that restores comfort affordably but may need minor alignment and has mixed long-term durability reports.
Choosing the Right Honda Accord Engine Mount: Key Factors to Consider
Fitment and Mounting Pattern
Exact fitment matters because engine mounts must align with Honda Accord engine and transmission mounting points to avoid stress and premature failure. A mount that matches factory bolt locations and tolerances minimizes installation adjustments and helps preserve drivetrain geometry.
Poor fitment can cause added strain on adjacent components, lead to uneven load distribution, and increase vibration. Verify bolt hole spacing, stud size, and whether the mount indexes correctly to the vehicle subframe or engine bracket before purchasing.
Material and Bushing Construction
Materials determine how a mount handles heat, oil exposure, and cyclic loads over time. Rubber compounds are common for vibration isolation but can degrade from oil and heat, while polyurethane offers longer life and firmer control at the cost of increased NVH input.
Consider whether the mount uses bonded rubber, hydraulic chambers, or polyurethane inserts. Each approach affects vibration damping, longevity, and how the engine moves under torque. Choose construction that balances durability with acceptable cabin comfort for your driving habits.
Vibration and Noise Isolation
One of the main reasons to replace an engine mount is to reduce engine vibration and audible noise transmitted to the cabin. Different mounts tune isolation versus rigidity, so the right choice depends on whether you prioritize comfort or crisper engine control.
Assess expected outcomes: softer mounts reduce vibration and noise but allow more engine movement, while firmer mounts limit movement and can introduce sharper vibration or noise under certain conditions. Think about typical driving—commuting, spirited driving, or towing—when deciding.
Torque Control and Engine Movement
Engine mounts must control torque-induced movement during acceleration, deceleration, and gear changes to prevent drivetrain shock and protect linkages. Torque management affects throttle response feel and the stress transmitted to driveline components.
Look for mounts designed to limit excessive rotation without being overly stiff. Features such as reinforced brackets or hydraulic damping help absorb torque pulses and reduce shock loads on engine and transmission mounts.
Durability and Environmental Resistance
Durability depends on resistance to oil, road salt, heat cycles, and mechanical fatigue. Mounts exposed to oil or coolant leaks can degrade faster if materials are not resistant to these substances.
Consider expected service life in your climate and usage. Quality manufacturing, corrosion-resistant hardware, and seals around bonded areas contribute to longer service intervals and lower likelihood of sudden failure.
Installation Complexity and Hardware
Installation ease affects whether you can perform engine mount replacement yourself or need a professional. Some mounts require engine support, torqueing to specific values, or temporary removal of ancillary components.
Check whether hardware is included, if alignment dowels are provided, and whether installation instructions are clear. Consider mounting torque specs and whether special tools or engine hoisting are necessary to complete a safe installation.
FAQ
What are common symptoms of a failing Honda Accord engine mount?
Common signs include increased cabin vibration at idle, clunks or bangs during acceleration or shifting, and visible engine movement under load. You may also notice alignment changes in drivetrain components or unusual noises that vary with throttle.
Can I replace a Honda Accord engine mount myself?
Many experienced DIYers can replace an engine mount with basic mechanical skills, the right tools, and an engine support method. Tasks often involve supporting the engine, unbolting the mount, and torqueing the new mount to specification. If you are unsure about torque specs or safe engine support, consult a technician.
How long do engine mounts typically last on a Honda Accord?
Life varies with driving conditions and exposure to oil, heat, and road contaminants. Engine mounts often last many years and tens of thousands of miles, but heavy use, leaks, or harsh climates can shorten lifespan. Regular inspections help catch deterioration early.
Will a firmer mount cause more vibration in the cabin?
Firmer mounts usually transmit more vibration to the chassis because they prioritize control over isolation. This tradeoff can improve engine response and reduce movement but may make some vibrations more noticeable, especially at specific RPMs or during low-speed idling.
What should I check before buying a replacement mount?
Confirm precise compatibility with your Honda Accord year and engine configuration, check mounting pattern and included hardware, and consider the mount material and stated durability. Also review installation requirements and any torque specifications you will need to follow.
How does contamination affect engine mount lifespan?
Exposure to oil, coolant, or road chemicals can degrade rubber compounds and bonded interfaces, accelerating failure. Keeping the engine bay clean and promptly addressing leaks reduces premature deterioration and helps mounts last longer.
How We Chose the Best Honda Accord Engine Mount
We focused on mounts that deliver precise fitment to Honda Accord engine and transmission attachment points, robust materials that resist tearing and degradation, and designs that control vibration without transferring excessive harshness to the chassis. We evaluated durability under typical driving loads, the quality of hardware and bushings, and how straightforward installation tends to be for competent DIYers and professional technicians. Noise isolation, torque control during acceleration and deceleration, and compatibility with factory mounting locations were key performance filters. We excluded options with unclear fitment documentation, non-standard mounting patterns, and those that rely on unproven or experimental materials. We did not include items with frequent fitment complaints or incomplete hardware. The final selection reflects balance across durability, vibration control, torque handling, and installation practicality for Honda Accord owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize exact fitment, appropriate material construction, and a balance between vibration isolation and torque control when choosing a Honda Accord engine mount. Consider how you drive, whether you prefer a softer ride or crisper engine control, and the environmental stresses the mount will face. Remember that installation complexity and included hardware matter for a smooth replacement. Focusing on these tradeoffs will help you select a mount that restores comfort and protects drivetrain components over the long term.
Explore More:
- Check out all Honda Accord parts & accessories
- Explore Engine
- Browse all Auto Parts
