Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Ford F-150 feels unusually bouncy, vibrates at idle, or transmits more engine noise into the cabin, the engine mounts could be the cause. Choosing the right Ford F-150 engine mount matters because proper fit and material choice affect vibration isolation, engine alignment, and long-term durability. This guide shortlists the top options for Ford F-150 owners, focusing on mounts that meet common fitment needs and real-world durability expectations. We evaluated noise and vibration control along with installation practicality and build quality to help you pick the most suitable mount for your truck. Read on for our top picks and what to consider before replacing a mount.
Looking for other parts? See all Ford F-150 parts & accessories.
Top Picks at a Glance
1. DILENBLE Engine and Transmission Mount Kit, Set of 3 (replaces A5473 A5381 A5474)
| Unit Count | 3.0 Count |
|---|---|
| Manufacturer | DILENBLE |
| Manufacturer Part Number | A5473 A5381 A5474 |
| Item model number | DLD-FDJZJ-0A75 |
This DILENBLE three-piece mount kit replaces the original engine and transmission mounts identified by part numbers A5473, A5381, and A5474 and is engineered to restore firm engine support and reduce drivetrain vibration. In practice the kit is used to swap out worn mounts that cause engine movement, noise, or sluggish feel during acceleration. The mounts combine molded rubber with metal support components to absorb vibration and stabilize the engine under load. The seller states direct-fit design for faster installation and many users report noticeably reduced vibration after replacement. Because this is a tailored replacement kit, installation is straightforward for a competent DIYer or a shop and requires no vehicle modifications. Limitations include that the listing specifies fitment for certain Ford models and years only and the kit contains three mounts rather than a full four-piece set that some applications require, so verify exact fitment and mount count before ordering.
Best for: Reliability-focused buyers who prioritize restoring factory-like engine stability and eliminating vibration with a direct replacement rather than performance upgrades.
Less Ideal for: Buyers who need a full complement of mounts beyond the three-piece kit or who require mounts for different model years or non-Ford F-150 applications should look elsewhere.
- Direct-replacement fit for the listed Ford part numbers to simplify installation
- Rubber-plus-metal construction intended to absorb vibration and reduce engine noise
- Set of three covers the primary engine/transmission mount locations referenced in the listing
- Reported by multiple buyers to noticeably reduce vibration after installation
- Kit includes three mounts only rather than a more complete multi-piece set for some repairs
- Fitment is limited to specific vehicle years and engines so compatibility must be confirmed before purchase
Verdict A straightforward three-piece direct-replacement mount kit focused on restoring vibration-free operation for the specified Ford fitments, but confirm year/engine compatibility and mount count before buying.
2. TRQ 2-Piece Engine Mount Set (MTA71122) Compatible with 1989–1993 Ford F-150
| Set Name | 2-Piece Engine Mount Set |
|---|---|
| Manufacturer | TRQ |
| Model | MTA71122 |
| Mounting Type | Chassis Mount |
This TRQ 2-piece engine mount set replaces the engine mounts on late-1980s to early-1990s Ford F-150s with the 4.9L inline-six and is sold as a matched pair intended for DIY installation. Each mount arrives pre-assembled to match factory mounting points so installers can swap them in without major modifications, and TRQ provides how-to videos to simplify the process. In real-world use the mounts reduce engine vibration and restore smoother idling and shifting compared with worn originals. Fitment reports are generally positive and most customers find the parts straightforward to fit with common hand tools and a jack to support the engine. Performance varies by vehicle and driving conditions so longevity can differ; a few users reported premature failure on unrelated vehicle models, so expect mixed long-term durability. These mounts are a practical, budget-friendly repair option for owners who want a convenient direct-replacement solution and are comfortable doing basic garage repairs or following video guidance.
Best for: Convenience-driven owners who prefer a cost-effective, direct-replacement kit they can install themselves using basic tools and follow-along videos to speed the job.
Less Ideal for: People seeking a heavy-duty or performance upgrade for demanding towing or off-road use should consider reinforced or specialty mounts tailored for those purposes.
- Direct-fit, pre-assembled replacements that align with factory mounting points for easier installation
- Includes both engine mounts needed for a matched repair on applicable F-150s
- Manufacturer provides DIY installation videos to guide users through the swap
- Multiple customers report noticeably reduced engine vibration and smoother operation after installation
- Some buyers on other vehicle models reported premature cracking or failure, indicating variable long-term durability
- A few installers noted minor fitment differences such as missing small fasteners or the need to reuse original nuts for clearance
Verdict A convenient, budget-friendly direct-replacement mount kit that restores reduced vibration for older Ford F-150s but with mixed reports on long-term durability.
3. A-Premium Front Left and Right Engine Motor Mount Kit, 2‑Pc Set
| Set Name | 2-PC Set |
|---|---|
| Manufacturer Part Number | APEM459 |
| Item model number | A5731 |
| Vehicle Fitment | Ford F-150 2009-2014 (select V8) |
This two-piece A-Premium engine motor mount kit replaces the front left and right mounts on select Ford V8 trucks and SUVs and is intended to restore engine positioning and reduce vibration under load. Installation replaces worn factory mounts during routine engine or transmission work; the kit includes two specific mounts to match the left and right positions. The listing highlights stress-tested construction and quality control aimed at meeting factory-spec performance, which should translate to firmer engine support and reduced movement during acceleration and towing. Some installers report tight tolerances and limited adjustability during fitment, so expect careful alignment and the possible need to swap or reuse hardware for an easier install. A one-year unlimited-mileage guarantee is included, offering short-term peace of mind, but long-term durability will depend on driving conditions and installation. This kit is best when you want a quality-focused replacement that aims to restore factory-level engine support but are prepared for a hands-on installation process.
Best for: Performance-oriented buyers who prioritize restoring firm, factory-quality engine support and vibration control after wear or during an engine rebuild.
Less Ideal for: Buyers seeking a drop-in, exact-match OEM replacement with effortless install or those who prefer a plug-and-play, no-adjustment solution should consider alternatives.
- Direct front left and right replacement design intended to match factory mounting locations
- Manufacturer states parts undergo stress testing and quality control to meet factory-spec performance
- Includes both left and right mounts so both sides can be serviced together
- One-year unlimited-mileage guarantee provides short-term coverage
- Installation can be tight with limited adjustment and may require swapping or replacing supplied hardware for smooth alignment
- Not a vehicle-specific engineered OEM part so fitment may need extra manipulation during install
Verdict A solid, performance-focused front engine mount kit that aims to restore factory-level support but may require careful alignment at installation.
4. SCITOO Engine and Transmission Mount Compatible with Ford F-150 (2007–2014)
| Fitment years | 2007-2014 |
|---|---|
| Mounting type | Chassis Mount |
| Unit count | 1.0 Count |
| Manufacturer | SCITOO |
This SCITOO engine and transmission mount kit replaces worn mounts on Ford F-150 trucks from 2007 through 2014. It installs where the engine and transmission bolt to the chassis to reduce vibration and control engine movement under load. The kit is presented as a direct replacement that matches common factory part numbers and is constructed to resist heat and wear for typical street and light-duty towing use. Buyers will appreciate that the parts fit without major modification and that instructions and common fitment notes are included to match part numbers before installation. The main limitations are that this is an aftermarket budget option rather than a premium OEM part and longevity can vary compared with higher-end mounts; noisy or heavily used trucks may see faster wear. Also professional installation or mechanical experience is recommended because correct alignment and torque matter for driveline behavior and longevity.
Best for: Budget-conscious owners who prioritize an affordable, functional repair to restore normal engine support and reduce vibration on a 2007–2014 Ford F-150.
Less Ideal for: Drivers who need heavy-duty, long-life mounts for frequent heavy towing, high-mileage fleets, or performance builds should consider more robust or OEM-quality alternatives.
- Made to match common factory part numbers for straightforward replacement on 2007–2014 F-150s
- Constructed for heat and wear resistance suitable for everyday driving and light towing
- Multiple pieces provided to restore both engine and transmission support, reducing vibration transfer
- Well reviewed by owners for correct fit and ease of installation
- Aftermarket budget construction may not match the long-term durability of higher-end or factory-quality mounts
- Not marketed as a premium or heavy-duty mount for intensive towing or performance applications
Verdict A cost-effective, correctly fitting replacement kit for 2007–2014 Ford F-150s that restores engine support at a budget price but sacrifices some long-term durability compared with premium options.
5. A-Premium Engine and Transmission Mount Set (3-piece) for Ford F-150 2011–2023 and Related Models
| Mounting Type | Chassis Mount |
|---|---|
| Set Name | Mount Set |
| Manufacturer | PremiumpartsWhosale |
This three-piece kit replaces the front left and right motor mounts plus the rear transmission mount commonly worn on V6 F-150s and related Ford family trucks and SUVs. It is intended for direct replacement use on specified 2.7L, 3.3L, 3.5L and 3.7L automatic-transmission, 4WD or RWD models, and is supplied as a matched set so all three mounting points are refreshed at once. The listing emphasizes factory-quality fitment and claims rigorous testing; buyers should expect similar installation steps to the factory parts and a return to reduced engine movement, less vibration in the cabin, and more stable shifting feel. Practical benefits include replacing multiple mounts in one purchase to avoid mismatched wear and simplifying install planning. Limitations are that fitment is restricted to the listed years, engines, and automatic transmissions only, and buyers should verify VIN or part numbers before ordering because it is not universal across all F-150 variants.
Best for: Buyers who prioritize low risk and predictable replacements for routine repair of vibration or engine movement on supported Ford F-150 V6 models and prefer a matched set to restore factory-like behavior.
Less Ideal for: Drivers seeking fits for manual transmissions, non-listed engines or model years, or those who want a one-off single mount instead of a full set should look elsewhere.
- Sold as a matched three-piece set to replace both motor mounts and the rear transmission mount together
- Advertised to meet or exceed factory-spec quality with claimed harsh testing
- Covers a wide range of common V6 F-150 model years and related Ford SUVs for straightforward fit on listed vehicles
- Designed for 4WD or RWD automatic-transmission applications so drivetrain orientation matches those models
- Fitment is limited to the specific engines, years, and automatic transmissions listed and will not suit other configurations
- Manufacturer guarantee terms are present but buyers should confirm compatibility via reference numbers or VIN before purchase
Verdict A convenient three-piece replacement kit for risk-averse F-150 owners who want to restore factory-like mount performance on the specified V6 automatic models.
6. DILENBLE Engine and Transmission Mount Kit, Set of 3
| Unit Count | 3.0 Count |
|---|---|
| Manufacturer | DILENBLE |
| Model | Engine Motor Mount |
| Manufacturer Part Number | A5739 A5738 A5668 A5735 |
This three-piece mount kit replaces worn engine and transmission mounts to curb vibration, reduce noise, and stabilize the powertrain under throttle and braking. It is built with rubber bonded to metal supports and claims to match factory-fit dimensions for a direct replacement install. Typical use is straightforward: remove the old mounts and bolt these into place to restore normal engine movement and prevent the engine from shifting during acceleration or when towing. Notable features include longitudinal tie support and reinforced metal components intended to absorb torsional loads and damp resonance, which improves steering feel and cabin comfort. Practical benefits are quick DIY installation for mechanically minded owners and immediate reduction in engine movement and associated driveline clunks. Important limitations: the product listing targets many vehicles and fitment must be checked carefully for the Ford F-150; some buyers reported minor fitment differences requiring a bolt change or slight adjustment, and long-term durability is still to be proven compared with higher-end or dealer mounts.
Best for: Practical optimizers who prioritize getting a functional, cost-effective factory-replacement mount set they can install themselves to reduce vibration and restore drivability.
Less Ideal for: Buyers seeking dealer-grade, long-term warranty-backed mounts or professional restoration for concours-level vehicles should consider OEM or premium aftermarket options instead.
- Set of three mounts intended to replace both engine and transmission mounts in one purchase
- Rubber-and-metal construction designed to absorb vibration and reduce noise
- Designed for direct bolt-in replacement to enable relatively fast DIY installation
- Reinforced tie-rod style support to limit engine travel during acceleration and braking
- Fitment can be vehicle-specific and may require swapping a bolt or minor adjustment during installation
- Manufacturer long-term durability claims are not fully validated by independent testing
Verdict A budget-friendly three-piece mount kit that delivers quick vibration reduction and a largely bolt-in replacement, but verify F-150 fitment and be prepared for minor adjustments.
7. maXpeedingrods Engine and Transmission Mounts for Ford Explorer/Police Interceptor Utility 3.5L–3.7L (2016–2019)
| Vehicle fitment | Ford Explorer V6 3.5L / Police Interceptor Utility V6 3.7L 2016-2019 |
|---|---|
| Manufacturer | maXpeedingrods |
| Manufacturer part number | OT89CQ |
| OEM part numbers referenced | GB5Z-6038-A, FB5Z-6068-D, FB5Z-6038-B, A5663HY, A5812 |
This maXpeedingrods kit supplies replacement engine and transmission mounts intended to directly replace worn factory mounts on compatible Ford Explorer and Police Interceptor Utility V6 3.5L/3.7L models from 2016 through 2019. The set is designed for a bolt-in swap without specialty tooling, so a professional or experienced DIYer can have the vehicle back on the road quickly. The listing highlights reduced wheel hop and crisper throttle response, which aligns with stiffer aftermarket mount behavior that limits engine movement and improves perceived responsiveness and control. Customers report smoother idle and reduced vibration after installation when fit is correct. On the downside, a few buyers noted fitment issues on non-matching applications and that not every piece in some kits matched exactly, so careful verification of part numbers and an experienced installer are recommended. If you want a direct-replacement kit that aims to restore factory stability with a slightly firmer feel, this package is a sensible option for routine engine-mount replacement or to eliminate vibration and wheel-hop symptoms.
Best for: A balanced, practical buyer who wants a complete replacement kit to restore drivability and reduce vibration without chasing high-performance upgrades or custom fabrication.
Less Ideal for: Drivers who prioritize ultimate performance tuning, those seeking a softer factory-like ride, or owners unwilling to verify part numbers and manage potential minor fitment adjustments.
- Sold as a full replacement set for engine and transmission mounts to address worn hardware in one service.
- Direct-replacement design intended for bolt-in installation on the specified Ford models, reducing install time.
- Reported to reduce idle vibration and wheel hop, improving perceived responsiveness and ride smoothness.
- Manufactured under IATF 16949/ISO 9001 aligned processes according to brand information, suggesting consistent production standards.
- Fitment problems reported when used on non-matching vehicles or when part numbers are not confirmed.
- Some buyers received kits with missing or non-matching pieces requiring adjustments or additional parts.
Verdict A practical full-set replacement for restoring engine stability on the listed Ford Explorer/Police Interceptor Utility models, but confirm part numbers before ordering to avoid fitment issues.
Choosing the Right Ford F-150 Engine Mount: Key Factors to Consider
Fitment and Compatibility
Exact fitment is critical because mounts must align with factory mounting points and engine geometry. Incorrect fitment can lead to accelerated wear, unexpected vibration, or added stress on adjacent components.
When fitment is correct, installation is faster and less likely to require modifications. Verify the mount’s fitment against your truck’s model year, engine type, and any subframe variations. Proper compatibility reduces the risk of drivability issues after installation and preserves factory alignment.
Material and Construction
Mounts are typically made from rubber, polyurethane, or metal hybrids, and each material affects performance. Softer rubber usually isolates vibration better but can degrade faster when exposed to oil and heat. Stiffer materials like polyurethane last longer and resist degradation but may transmit more vibration into the cabin.
Assess construction quality, including welds, bonding between metal and elastomer, and corrosion protection. Better construction generally correlates with longer service life and more consistent performance under load.
Vibration Isolation
The primary job of an engine mount is to reduce transmitted vibration and harshness. Effective isolation improves ride comfort and reduces noise in the cabin. The level of isolation you want depends on your priorities; drivers seeking a quieter ride will favor mounts with softer damping, while those prioritizing performance may accept firmer mounts.
Consider how the mount manages different frequencies of vibration, including idle shake and driveline resonance during acceleration. Good isolation also helps protect wiring, hoses, and exhaust connections from excessive movement.
Durability and Environmental Resistance
Engine mounts endure heat, oil exposure, road salt, and mechanical stress, so durability is a major buying factor. Look for materials and finishes that resist oil swelling, UV degradation, and corrosion on metal parts. Longer-lasting mounts reduce the frequency of replacements and maintain performance over time.
Durability also ties to expected load cycles and how the mount handles repeated torque events from shifting and acceleration. A durable mount minimizes the chance of sudden failure that could affect drivability or cause collateral component damage.
Installation Complexity
Some mounts can be swapped with basic tools and moderate mechanical skill, while others require engine support, lifts, or special hardware. Installation complexity affects total time and possible labor costs if you choose professional help. Consider whether you have the tools and workspace to safely support the engine during removal and installation.
Clear instructions, included hardware, and standard fastener sizes make installation easier. Also factor in whether adjacent parts need to be removed to access the mount, which can increase time and risk of incidental damage.
Load Capacity and Design
The mount must handle engine torque and weight without excessive deflection. Load capacity and internal design influence how much the engine can move under acceleration, deceleration, and during torque spikes. A mount designed to handle the expected loads will maintain alignment and reduce stress on transmission and driveline components.
Consider mounts with reinforced metal components or improved internal geometry if you tow heavily, carry large loads, or have performance modifications. Matching the mount’s capacity to your driving demands helps preserve drivetrain integrity and responsiveness.
FAQ
What are the signs that a Ford F-150 engine mount needs replacement?
Common signs include increased vibration at idle, clunking or banging during acceleration or shifting, and visible movement of the engine when revving. You may also notice unusual noise or misalignment of hoses and exhaust components. If you see cracks, torn rubber, or leaking fluid from a hydraulic-style mount, it usually indicates replacement is needed.
Can I replace an engine mount myself on an F-150?
Many owners can replace an engine mount with moderate mechanical skill and basic tools, but some mounts require engine support or lift access. Plan for proper engine support, follow torque specs, and use safe lifting practices. If you are unsure about supporting the engine or accessing the mount, professional help is advisable.
How long do engine mounts typically last on a Ford F-150?
Lifespan varies with driving conditions and material, but mounts often last many years under normal use. Exposure to oil, severe heat, heavy towing, and frequent hard driving can shorten service life. Regular inspections help catch early deterioration before it leads to other drivetrain issues.
Does replacing an engine mount affect alignment or drivetrain components?
A properly installed mount restores intended engine alignment and reduces undue stress on drivetrain components. If a replacement is the wrong fit or installed incorrectly, it can alter alignment and increase wear on transmission mounts, driveshafts, or exhaust hangers. Ensuring correct fitment and torque prevents those issues.
Are polyurethane mounts a good choice for an F-150?
Polyurethane mounts tend to be more durable and resist oil and weathering better than softer rubber, but they often transmit more vibration. They can be a good choice if you prioritize longevity and load handling, especially for trucks used for towing or heavy duty. Consider the tradeoff between increased vibration and longer service life when choosing material.
How We Chose the Best Ford F-150 Engine Mount
We focused on components specifically designed for the Ford F-150 and prioritized fitment accuracy, material durability, noise and vibration isolation, and ease of installation. Fitment accuracy was used to ensure straightforward replacement without modifications. Material durability considered the construction and resistance to oil, heat, and road exposure. Noise and vibration isolation assessed how well the mount reduces engine movement and transfers fewer vibrations to the chassis. Ease of installation evaluated whether the mount can be installed with basic hand tools and common mechanical skills. We also considered warranty coverage and manufacturer quality control practices as indicators of expected lifespan. We excluded universal or multi-model mounts that require significant modification, aftermarket parts without clear fitment data, and any components that do not specify compatibility with the Ford F-150. The final list emphasizes mounts that balance reliable isolation, robust construction, and practical fitment for typical F-150 use cases.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Ford F-150 engine mount, prioritize correct fitment and the material properties that match your driving needs. Balance vibration isolation against durability so you get acceptable comfort without frequent replacements. Also consider installation complexity and the mount’s load capacity if you tow or carry heavy loads. Focusing on these factors will help you select a mount that maintains engine alignment, reduces unwanted noise, and endures real-world conditions.
Explore More:
- Check out all Ford F-150 parts & accessories
- Explore Engine
- Browse all Auto Parts
