Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive an Infiniti QX60, the condition of its tie rod ends has a direct effect on steering precision and tire wear. Replacing worn tie rod ends restores predictable steering response and reduces uneven tire wear, so choosing the right unit matters for daily drivability and long-term maintenance. This guide highlights the top shortlisted tie rod ends for the Infiniti QX60 and explains the evaluation criteria we used, including fitment accuracy and component durability. Read on to understand which features to prioritize and why these options made our list.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
| Best overall The best all-around choice for most situations | Metrix Premium Chassis Parts 4‑Piece Front Inner & Outer Tie Rod End Kit for Infiniti QX60 |  |
| Best Quality Built to a higher standard if you want something more solid | Metrix Premium Chassis Parts Front Right Outer Tie Rod End (47571MT) |  |
| Best Value The sweet spot between price and what you get | KDSA Front Outer Tie Rod End Set (ES801265/ES801266) for Infiniti QX60 / JX35 and Nissan Murano/Pathfinder |  |
| Best budget The cheapest option that still gets the job done reliably | HHCM Front Outer Tie Rod End Kit (ES801265/ES801266) |  |
| Highest Rated A top-rated pick with lots of positive feedback | Metrix Premium Chassis Parts Front Left Outer Tie Rod End |  |
| Most popular A crowd favorite that many people choose with confidence | Detroit Axle Front Outer Tie Rod Ends Replacement (2-pack) |  |
| Best Seller A high-volume bestseller chosen again and again | TRQ 4‑Piece Front Inner and Outer Tie Rod Set for Infiniti QX60 / Nissan Pathfinder |  |
1. Metrix Premium Chassis Parts 4‑Piece Front Inner & Outer Tie Rod End Kit for Infiniti QX60
| Compatible vehicles | 2014-2019 Infiniti QX60 |
|---|---|
| Kit contents | 2 inner tie rod ends, 2 outer tie rod ends, hardware |
| Manufacturing origin | Made in Europe |
| Certifications | IATF 16949, ISO 9001 |
This Metrix four-piece tie rod end kit replaces both inner and outer front tie rods on the Infiniti QX60 and is intended for routine steering control repairs. The kit includes two inner and two outer tie rod ends plus necessary hardware so you can replace worn components in one service. Metrix specifies manufacturing to IATF 16949 and ISO 9001 standards and says parts are made in Europe with corrosion protection and some grease fittings for serviceability, which helps longevity in wet or salted-road conditions. For a balanced buyer this kit delivers a near-factory fit, straightforward installation for DIYers or mechanics, and the convenience of replacing all front tie rod wear items at once. Important practical limits are that tie rod replacement still requires a professional wheel alignment afterward and the kit components are not labeled for left/right in some packs so identification during installation may take extra care. The included 3-year/36,000-mile warranty offers added peace of mind for routine ownership use on the QX60.
Best for: A balanced all-round buyer who wants a single, factory-quality repair kit for the Infiniti QX60 that combines fit, durability, and ease of installation for routine steering maintenance.
Less Ideal for: Drivers seeking performance-tuned steering parts or specialty racing components should look elsewhere; also avoid this kit if you need labeled left/right parts for quicker shop installation workflows.
- Complete 4-piece kit covers both inner and outer front tie rods so one purchase handles a full front steering service.
- Factory-quality manufacturing standards (IATF 16949, ISO 9001) claimed for consistent fit and reliability.
- Some components have grease fittings for easier periodic maintenance and longer service life.
- Extra corrosion protection for better resistance to salt and road contaminants.
- Parts in the kit may not be individually labeled for side or position, requiring extra attention during installation.
- Replacement requires a professional wheel alignment after installation to restore proper steering geometry.
Verdict: A complete, factory-quality front tie rod kit tailored for the Infiniti QX60 that balances fitment, corrosion protection, and serviceability for routine steering repairs.
2. Metrix Premium Chassis Parts Front Right Outer Tie Rod End (47571MT)
| Model | 47571MT |
|---|---|
| Position | Front Right Outer |
| Manufacturer Part Number | 47571MT |
| OEM Part Number | ES801266, D85203KA0A, TO69182 |
This Metrix front right outer tie rod end replaces the steering link between the steering rack and knuckle to restore precise steering and wheel alignment on compatible Infiniti QX60 and related vehicles. It is a direct-replacement part with machined exterior surfaces and a greasable design that simplifies service and can extend component life when maintained. The part is built to meet automotive quality standards and the listing highlights heat-treated studs, corrosion-resistant coating, and factory-style fitment for straightforward installation; buyers should still plan a wheel alignment after installation. Practical benefits include OEM-like fit, serviceability via the grease fitting, and corrosion protection intended for long-term durability. Limitations are typical for single-component replacements: it addresses steering linkage only so other worn suspension parts should be inspected, and installation requires basic suspension tools and an alignment check to ensure correct steering geometry.
Best for: Performance-oriented owners who prioritize precise steering response and factory-quality replacements for Infiniti QX60 front-end repairs, and who maintain components proactively to preserve handling.
Less Ideal for: Buyers seeking an all-in-one front suspension refresh or a low-effort, one-visit service should consider complete suspension kits or professional install packages instead.
- Direct-fit replacement for front right outer position with OEM interchange numbers for correct fitment
- Greasable design allows periodic lubrication to extend service life
- Machined exterior and heat-treated stud for reliable steering connection
- Cataphoresis corrosion coating to resist rust and improve longevity
- Sold as a single tie rod end so both sides may need separate purchase to ensure even wear
- Requires wheel alignment after installation to restore correct steering geometry
Verdict: A factory-quality, greasable front right outer tie rod end engineered to deliver precise steering fitment and long-term corrosion resistance for Infiniti QX60 front-end repairs.
3. KDSA Front Outer Tie Rod End Set (ES801265/ES801266) for Infiniti QX60 / JX35 and Nissan Murano/Pathfinder
| Fitment | Infiniti QX60 2014-2020, JX35 2013; Nissan Murano 2015-2022; Pathfinder 2013-2020 |
|---|---|
| Package | 2pc front outer tie rod ends (left and right) |
| Manufacturer | KDSA |
| Manufacturer Part Number | ES801265 ES801266 |
This KDSA two-piece front outer tie rod set replaces the left and right outer tie rods used on Infiniti QX60 and JX35 and compatible Nissan Murano and Pathfinder years. It is sold as a matched driver and passenger pair and is intended for routine steering linkage repair or alignment work. The seller states precision tolerances for straightforward installation and steering alignment, which helps the parts fit and function like factory replacements without extensive modification. Buyers can expect restored steering feel and reduced front-end noise compared with worn tie rod ends. The parts are manufactured under factory-standard processes in Taiwan and come with a short warranty and 30-day return option. Limitations include the typical lifespan of an aftermarket steering joint versus premium OE-sourced parts and the need for professional alignment after installation to ensure proper toe settings. Also this set covers specific QX60/JX35 and Nissan year ranges only, so verify fitment before ordering.
Best for: Practical owners who prioritize reliable, budget-conscious repairs and want a direct replacement that makes steering feel and alignment simple to restore.
Less Ideal for: Drivers seeking the longest-lasting, premium-branded steering components or those who need parts for vehicles outside the specified Infiniti and Nissan year ranges should look elsewhere.
- Sold as a matched driver and passenger pair for convenience during replacement
- Manufactured to factory-standard tolerances to simplify fit and alignment
- Restores steering feel and reduces front-end noise when worn tie rods are replaced
- Fits Infiniti QX60/JX35 and specified Nissan Murano and Pathfinder model years
- Aftermarket part may not match longevity of higher-end factory-brand components
- Requires wheel alignment after installation to correct toe and steering geometry
Verdict: A practical, factory-tolerance matched pair of front outer tie rod ends that restores steering performance at a budget-friendly value.
4. HHCM Front Outer Tie Rod End Kit (ES801265/ES801266)
| Model | ES801265 ES801266 |
|---|---|
| Vehicle Fitment | Infiniti QX60 2014-2015, 2016-2017 3.5L, 2018-2020 |
| Package Quantity | 2 pieces |
This HHCM kit supplies both left and right front outer tie rod ends intended as direct replacement steering parts for the Infiniti QX60 and related models. The components are described as manufactured to factory-style tolerances with corrosion-resistant finishes and come preassembled for a straightforward swap during a steering repair or alignment service. In practice these tie rod ends let you restore steering feel and correct toe alignment without replacing the whole rack assembly. The kit is easy to fit and includes the two outer ends you need, which makes it convenient for DIYers or shops handling a single axle job. Buyers should note these are aftermarket parts and not greasable in most customer reports, so long-term durability may lag premium factory-quality options under high-mileage or heavy-duty use. Expect a cost-effective repair that returns drivability quickly, but plan routine inspections and alignment after installation to ensure lasting performance.
Best for: Budget-conscious owners who need an affordable, ready-to-install front outer tie rod solution for routine steering repairs on an Infiniti QX60 and prioritize upfront cost savings.
Less Ideal for: Drivers seeking the longest-term, serviceable steering joints or those who routinely tow or operate in extreme conditions should consider higher-end or greasable alternatives.
- Sold as a matched left/right pair so both sides of the front outer tie rods are replaced at once
- Manufactured to factory-style tolerances for direct fit on compatible vehicles
- Corrosion-resistant finish advertised to help longevity in typical road conditions
- Preassembled design simplifies installation and reduces shop labor time
- Not greasable which can limit serviceability compared with greasable aftermarket or factory-quality parts
- Aftermarket construction means potential variance in long-term durability compared with higher-end replacements
Verdict: A cost-effective, direct-fit pair of front outer tie rod ends for Infiniti QX60 owners who want a quick, inexpensive steering repair but are willing to accept aftermarket durability limits.
5. Metrix Premium Chassis Parts Front Left Outer Tie Rod End
| Position | Front Left Outer |
|---|---|
| Model | 47570MT |
| Manufacturer | METRIX PREMIUM CHASSIS PARTS |
| OEM Part Number | ES801265, MS30670, TO69181, D86403KA0A |
This Metrix front left outer tie rod end is a direct replacement designed for Infiniti QX60 fitment and functions as the steering linkage between the inner tie rod and the wheel hub. It is typically used when a worn tie rod causes play in the steering, uneven tire wear, or an off-center steering wheel. The part is machined steel with a supplied cotter pin and matches several OEM interchange numbers for straightforward installation. Buyers will appreciate the aftermarket part engineered to meet automotive quality standards and the manufacturer warranty for added confidence. In practice the unit installs like a factory part and reviewers report accurate fit and easy installation with only a wheel alignment recommended afterward. Limitations include occasional packaging/labeling mix-ups reported by some customers and the standard recommendation to replace the opposite side or have alignment performed, so additional labor or parts may be needed when servicing both sides.
Best for: Reliability-focused buyers who prioritize a factory-quality steering repair for an Infiniti QX60 and prefer a replacement part engineered to match original performance and fit.
Less Ideal for: Shoppers seeking a performance upgrade or a universal part for multiple vehicle types should look elsewhere; this is a like-for-like replacement for the QX60 only.
- Made to meet or exceed OEM standards for reliable steering performance
- Machined steel construction for durable, factory-like fit
- Includes cotter pin for secure installation
- Clear interchange numbers ensure correct fit for Infiniti QX60
- Some customers reported incorrect left/right labeling or packaging errors
- May require front-end alignment after installation, adding cost and time
Verdict: A dependable, factory-style left outer tie rod end for the Infiniti QX60 that prioritizes fit and reliability with a few packaging caveats.
6. Detroit Axle Front Outer Tie Rod Ends Replacement (2-pack)
| Position | Front |
|---|---|
| Manufacturer | Detroit Axle |
| Manufacturer Part Number | ES801265_ES801266 |
This Detroit Axle kit supplies two front outer tie rod ends intended as a direct replacement for compatible Infiniti QX60 and related models. It is used to restore steering stability and eliminate play or vibration caused by worn outer tie rods. Notable features include factory-style fitment, grease zerts for periodic lubrication, and the parts undergo impact and fatigue testing according to the brand. In practice the pieces install like OEM replacements and let you reestablish proper toe alignment without modifying surrounding components. The inclusion of grease fittings improves long-term serviceability compared with sealed, non-serviceable units. Limitations to consider are that the kit provides only the outer tie rod ends so an alignment and any worn inner components must be handled separately, and some installers note the jam nut is not replaced so you may need to reuse or source a new lock nut. For a convenience-focused buyer who wants a straightforward, serviceable swap that matches factory fit, this is a practical option.
Best for: Convenience-driven buyers who want a ready-to-install, factory-matching outer tie rod replacement that restores steering feel with minimal fuss and easier maintenance.
Less Ideal for: Buyers seeking a complete steering overhaul or a kit that includes inner tie rods, hardware, and alignment services should look for a more comprehensive package.
- Direct-fit design intended to match factory steering geometry for straightforward installation
- Grease zerts on the tie rod ends allow periodic lubrication to extend service life
- Parts are tested for impact, wear, and fatigue to support durability claims
- Sold as a two-piece kit covering both front outer tie rod ends for one-axle replacement
- Kit includes only outer tie rod ends so additional steering components or alignment are not covered
- Does not include new jam nuts which some installers prefer to replace during service
Verdict: A convenient, serviceable direct-fit replacement for front outer tie rod ends when you need an easy swap to restore steering on the Infiniti QX60.
7. TRQ 4‑Piece Front Inner and Outer Tie Rod Set for Infiniti QX60 / Nissan Pathfinder
| Manufacturer | TRQ |
|---|---|
| Model | TRQ PSA66694 4 Piece Tie Rod Set |
| Position | Front Inner, Front Outer |
| Exterior | Machined |
This TRQ kit supplies two front inner and two front outer tie rods as a direct-fit replacement for specified Infiniti QX60, JX35 and Nissan Pathfinder model years. It arrives pre-assembled where applicable and pre-greased parts and machined exterior surfaces aim to make installation straightforward for a DIY or shop job. The set covers both driver and passenger sides so you can service the entire front steering linkage at once, which helps restore steering feel and alignment geometry after worn rod removal. Notable practical perks are TRQ's compatibility verification and a large library of installation videos to guide less experienced installers. Important limitations: some users report the self-locking nylon nuts are single-use and can be difficult to replace, and a few buyers noted occasional fitment or hardware issues that required workarounds. A front alignment is still required after installation. For a risk-averse buyer, the parts offer an affordable factory-replacement style option but check the included nuts and thread condition before final assembly.
Best for: Risk-averse mainstream buyers who prioritize a straightforward, factory-replacement style repair and want clear installation guidance and documented fitment for Infiniti QX60 front steering service.
Less Ideal for: Buyers seeking fully serviceable tie rods with reusable grease fittings or those who prefer premium aftermarket brands with different hardware options should consider alternatives.
- Complete 4-piece kit replaces both inner and outer front tie rods for a full steering service.
- Pre-assembled and pre-greased components simplify installation and reduce prep time.
- Machined exterior finish and factory-compatible thread pitch for straightforward fitment.
- Extensive installation video library and compatibility checks help DIY installers.
- Includes single-use nylon locking nuts that may be hard to source as replacements.
- A small number of buyers reported fitment or hardware problems on specific vehicles.
Verdict: A complete, direct-fit four-piece front tie rod kit for Infiniti QX60 owners who want an affordable, installation-friendly factory-style replacement.
Choosing the Right Infiniti QX60 Tie Rod End: Key Factors to Consider
Fitment and Compatibility
Exact fitment to the Infiniti QX60 matters because incorrect thread size, taper angle, or mounting dimensions can prevent proper installation or lead to steering play. Verify part numbers and documented vehicle applications to ensure the replacement matches the steering knuckle and inner linkage connections.
Proper compatibility simplifies installation and helps preserve alignment settings. Mismatched components may require extra adapters or rework and can introduce premature wear or safety risks.
Ball Joint Design and Durability
The internal ball joint controls movement and absorbs steering forces, so its material quality and tolerance affect longevity and steering feel. Look for parts with hardened bearing surfaces and adequate lubrication channels to reduce friction and wear.
A robust ball joint reduces the likelihood of looseness developing under load, which helps maintain stable steering response and reduces the frequency of replacements.
Sealing and Corrosion Protection
Seals and protective coatings keep contaminants out and extend service life, especially in wet or salted-road conditions. A durable rubber boot with a secure clamp or molded lip prevents dirt and moisture from degrading the joint.
Corrosion-resistant finishes on threaded sections and studs help maintain serviceability and prevent seized components during future repairs, which is important for long-term maintenance.
Adjustability and Alignment Considerations
Some tie rod ends allow for length adjustment or come with alignment-friendly features that simplify getting toe settings right after installation. Components that support straightforward adjustment reduce the need for additional parts or time at the alignment rack.
Because correct toe and steering geometry are critical for tire life and handling, choose parts that do not complicate alignment and that preserve the original steering geometry once installed.
Hardware and Installation Quality
Included hardware such as castle nuts, cotter pins, and grease fittings affects installation completeness and future serviceability. High-quality hardware ensures the part can be secured to factory torque specifications and serviced as needed.
Clear installation notes, durable fasteners, and provisions for greasing make day-to-day maintenance and any future inspections easier and safer.
Warranty and Expected Service Life
Warranty length can indicate manufacturer confidence and provide recourse if a part fails prematurely. Consider typical service intervals and whether the part is backed by a reasonable guarantee against defects.
Longer expected service life reduces ownership cost and downtime. Balance warranty coverage with the other performance and fitment factors to make a practical choice.
How We Chose the Best Infiniti QX60 Tie Rod End
We narrowed the field to components specifically designed to fit the Infiniti QX60, prioritizing parts that match factory mounting points and steering geometry. Our evaluation focused on fitment accuracy, ball joint durability and sealing, materials and corrosion protection, and the quality of included hardware such as boots and grease fittings. We also considered serviceability factors like adjustability and whether the part supports straightforward alignment procedures after installation. Units that showed ambiguous vehicle application, lacked clear specification data, or had inadequate corrosion protection were excluded. The final selection favors tie rod ends that reduce steering play, maintain alignment, and offer long-term reliability under typical driving conditions.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common symptoms of a bad tie rod end on an Infiniti QX60?
You may notice uneven or rapid tire wear, a loose or wandering steering feel, or a knocking noise when turning. Symptoms often develop gradually, so periodic inspections help catch wear before handling is affected.
How often should tie rod ends be inspected or replaced?
Inspection intervals depend on usage and road conditions, but a visual and physical check during routine services is often recommended. Replace tie rod ends when there is noticeable play, damaged boots, or degraded sealing to maintain safe steering.
Will replacing a tie rod end require a wheel alignment?
Replacing a tie rod end usually affects toe settings, so an alignment check and adjustment is commonly needed. Adjustability of the new part influences how much realignment is required after installation.
Can I replace the tie rod end myself on an Infiniti QX60?
A mechanically inclined person with proper tools can replace a tie rod end, but correct torqueing, safe jacking procedures, and an alignment afterward are important. If you are unsure about any step, professional service reduces the risk of installation errors.
What causes tie rod end wear on the QX60?
Wear typically results from contaminant ingress, degraded seals, corrosion, or repeated heavy loads from rough roads. Preventive measures like regular inspections and addressing damaged boots can slow the wear process.
How do I recognize outer versus inner tie rod end issues?
Outer tie rod end issues often show as play at the wheel and affect toe more directly, producing uneven tire wear and steering looseness. Inner tie rod problems may present as steering play at the steering wheel or inconsistent centering. A hands-on inspection and lift check can help locate the affected joint.
Conclusion
When choosing a tie rod end for the Infiniti QX60, prioritize correct fitment, a durable ball joint design, and good sealing to protect against contaminants. Consider adjustability to simplify alignment and check that quality hardware and corrosion protection are included.Balancing these factors helps maintain precise steering and reduces the likelihood of repeat work. Focus on parts that preserve steering geometry and offer the best combination of durability and serviceability for everyday driving.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Tie Rod Ends Maintenance & Repair Guides
- Explore Suspension & Steering
- Browse all Auto Parts
