Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive an Infiniti QX60, the right suspension kit can meaningfully change how the vehicle rides, handles corners, and responds to road imperfections. Choosing the correct kit matters because the wrong components can degrade comfort, introduce noise, or affect alignment and tire wear.This guide highlights the top shortlisted suspension kits for the Infiniti QX60 and explains the practical tradeoffs we considered, including fitment, ride quality, and durability. Read on to see which options matched our criteria and why they earned a spot on the list.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
1. Detroit Axle 6pc Suspension Kit for Infiniti QX60 / Nissan Pathfinder (Front Struts, Rear Shocks, Sway Bar End Links)
| Fitment | 2013 Infiniti JX35; 2014-2020 Infiniti QX60; 2013-2020 Nissan Pathfinder |
|---|---|
| Kit contents | 2 front complete struts w/ coil springs, 2 rear shock absorbers, 2 sway bar end links |
| Coating | Electrophoretic / electrostatic coating |
| Item model number | 6AQS54067 |
This Detroit Axle 6-piece suspension kit supplies both front complete strut assemblies with coil springs, two rear shock absorbers, and front sway bar end links so you can refresh all four corners of an Infiniti QX60 or 2013 Nissan Pathfinder in one job. The front struts arrive fully assembled so installation typically avoids a spring compressor and speeds up shop time. Electrostatic coating is used on components to reduce corrosion risk and the coil springs are designed to restore ride height and handling stability. Buyers report the kit fits and resolves common bounce and bottoming issues, and replacing all corners will noticeably tighten handling and steering confidence. Expect the ride to feel a bit firmer than very worn originals, which improves control but can reduce plushness for drivers prioritizing a softer ride. Some installers noted alignment and fastener checks are necessary during assembly to avoid noises. For a balanced, full-kit replacement that aims for factory-style performance and simplified installation, this kit is a practical option for QX60 owners willing to accept a slightly firmer feel.
Best for: Balanced buyers who want a full, factory-quality suspension refresh for an Infiniti QX60 without chasing individual parts and who prioritize improved handling and restored ride height.
Less Ideal for: Drivers who prioritize the softest possible ride or those who need a performance-tuned or heavy-duty lift-specific suspension solution should consider alternative specialty kits.
- Complete kit covers both front struts, rear shocks, and sway bar end links for a single coordinated replacement
- Front struts come fully assembled so no coil spring compressor is required during install
- Electrophoretic/electrostatic coating improves corrosion resistance for longer service life
- Designed to restore ride height and improve handling stability compared with worn components
- Some users report occasional fitment or fastener alignment issues that require minor adjustment during installation
- Ride can feel firmer than original suspension, which may be less comfortable for drivers who prefer a soft ride
Verdict: A ready-to-install, full 6-piece suspension kit that restores ride height and handling for the Infiniti QX60 with minimal special tools required.
2. TUCAREST 10‑Piece Front Suspension Control Arm and Tie Rod Kit for 2013–2020 Nissan Pathfinder / 2014–2020 Infiniti QX60
| Fitment | 2013–2020 Nissan Pathfinder; 2014–2020 Infiniti QX60 |
|---|---|
| Kit contents | 2 lower control arms w/ ball joints, 2 inner tie rod ends, 2 outer tie rod ends, 2 sway bar end links, 2 rack boots |
| Material | Alloy steel and aluminum |
| Position | Front |
This TUCAREST kit bundles the main front suspension components you typically replace when restoring steering feel and firming up handling on a QX60: two lower control arms with ball joints, inner and outer tie rod ends, sway bar end links and rack boots. It is designed as a vehicle-specific replacement set intended for front‑end suspension refresh during a comprehensive repair or upgrade. The parts are machined alloy steel and aluminum and are claimed to follow factory-spec production with multiple quality checks during manufacturing. For a performance-oriented buyer this kit simplifies sourcing by grouping matching components and cuts installation time compared with buying pieces separately. Expect improved steering response and reduced play after installation plus the convenience of a matched set for alignment. Keep in mind this is a full mechanical replacement kit without upgraded performance bushings or adjustable geometry, so drivers looking for track-level tuning or thicker-duty motorsport components will need aftermarket performance parts instead.
Best for: Performance-oriented owners who want a matched, vehicle-specific front suspension refresh to restore steering precision and handling balance on an Infiniti QX60.
Less Ideal for: Drivers seeking race-spec adjustable control arms, polyurethane bushing upgrades, or heavy-duty competition parts should look at dedicated performance suspension components instead.
- Includes all primary front suspension components needed for a full lower-end refresh on the QX60, reducing parts sourcing hassle.
- Vehicle-specific fitment for 2013–2020 Pathfinder and 2014–2020 QX60 improves chances of correct fit and faster installation.
- Machined alloy steel and aluminum construction aims to match factory-spec durability and fit.
- Bundled parts help restore steering precision and reduce play when replaced together and followed by alignment.
- Does not include upgraded performance bushings or adjustable arms for alignment tuning.
- Kit is focused on mechanical replacement and not designed as a heavy-duty or track-oriented performance upgrade.
Verdict: A convenient, factory-spec replacement bundle that restores front-end feel on the QX60 but is not a track-grade performance overhaul.
3. TRQ Front Steering & Suspension 8-Piece Kit (fit for Infiniti QX60)
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front Lower |
| Unit Count | 1.0 Count |
| Model | TRQ PSA64908 8 Piece Steering & Suspension Kit |
This TRQ front steering and suspension kit bundles the common front wear items—inner and outer tie rods, lower control arms with ball joints, and sway bar links—into one vehicle-specific package for the Infiniti QX60. Designed as direct-fit replacements, the parts arrive pre-greased and anti-corrosion coated to simplify installation and reduce prep work. For a practical DIYer or independent shop, the kit removes the hassle of sourcing each component separately and can quickly restore tight steering and improved road feel after worn parts cause looseness or uneven handling. Users report generally solid fit and finish and noticeable stability gains when the whole front end is refreshed. Limitations to expect are occasional fitment variance on some chassis or 4WD configurations and the absence of zerk fittings for future greasing, so long-term serviceability may require different upkeep. The kit is a value-focused choice that prioritizes ease of installation and a complete repair over premium factory-brand components.
Best for: Practical optimizers who want a cost-effective, all-in-one front suspension refresh for an Infiniti QX60 and prefer completing the job themselves or through a local shop.
Less Ideal for: Buyers seeking factory-brand parts with guaranteed dealer-level fitment or those who need long-term serviceable joints with grease fittings should consider alternatives.
- Complete front kit includes tie rods, lower control arms with ball joints, and sway bar links to avoid multiple orders
- Vehicle-specific design intended for direct fit on Infiniti QX60 to simplify installation
- Pre-greased joints and anti-corrosion coating reduce initial maintenance and improve longevity
- Kitted approach restores handling and steering feel by replacing interacting components together
- Some users have reported occasional fitment interference on specific chassis or axle arrangements
- No service zerk fittings on joints, so future lubrication requires disassembly or aftermarket fittings
Verdict: A budget-friendly, complete front steering and suspension kit that simplifies restoring QX60 handling but may need close fit verification for certain chassis variations.
4. AngyMeck Front Lower Control Arm Suspension Kit with Ball Joints for Infiniti QX60 / Nissan Pathfinder
| Fitment | Infiniti QX60 2014–2019; Nissan Pathfinder 2013–2019 |
|---|---|
| Position | Front lower |
| Unit Count | 2.0 Count |
| Manufacturer | AngyMeck |
| Manufacturer Part Number | AM498436M1 |
This AngyMeck suspension kit supplies two front lower control arms with preinstalled ball joints intended as a direct-fit replacement for Infiniti QX60 and compatible Nissan Pathfinder models. It is typically used to repair worn lower arms that cause loose steering, uneven tire wear, or front-end clunks; installation is a straightforward bolt-on task for a competent DIYer or a quick shop job. Notable features include vehicle-specific fitment, factory-style mounting points, and ball joints already pressed into the arms which saves installation time. The practical benefits are restored front suspension geometry and improved steering feel compared with worn components at a lower price than many name-brand assemblies. Expect some variability in long-term durability compared with premium suppliers and occasional reports of premature bushing wear that could require earlier replacement. If you prioritize a low-cost repair that gets the vehicle back on the road and restores basic handling, this kit delivers solid value but may not match the longevity of higher-end factory-quality parts.
Best for: Budget-conscious buyers who need a low-cost, direct-fit replacement to restore normal steering and suspension function on an Infiniti QX60 and prioritize immediate reliability over long-term durability.
Less Ideal for: Owners seeking the longest-lasting, heavy-duty, or performance-oriented suspension components should consider higher-end factory-quality or upgraded aftermarket arms instead.
- Vehicle-specific fit for Infiniti QX60 and 2013–2019 Nissan Pathfinder for easier installation
- Includes both left and right lower control arms with ball joints preinstalled to save press-in labor
- Affordable option that restores basic suspension geometry and steering feel
- Sold as a matched pair which helps keep alignment and handling consistent after replacement
- Some customers report premature bushing failure indicating variable durability compared with premium parts
- Lower-cost construction may lead to shorter service life under heavy use
Verdict: A very affordable, matched pair of front lower control arms with ball joints that restores steering and suspension function on QX60/Pathfinder models at a budget price.
5. Detroit Axle Front 6‑Piece Control Arms Kit for Infiniti JX35/QX60 (Front Lower)
| Fitment | 2013–2019 Infiniti JX35 / QX60 |
|---|---|
| Kit contents | 2 front lower control arms with ball joints, 2 outer tie rod ends, 2 sway bar end links |
| Position | Front Lower |
| Manufacturer | Detroit Axle |
This Detroit Axle kit bundles the two front lower control arms with preinstalled ball joints along with two outer tie rod ends and two sway bar end links so you can refresh the entire front lower end in one job. It is intended as a direct replacement for 2013–2019 Infiniti JX35 and QX60 models and simplifies installation because the lower arms arrive with ball joints pressed in and the kit groups common wear items that typically fail together. In practice the set reduces parts sourcing time and helps avoid repeated disassembly when you replace only one component at a time. Customer feedback shows generally solid fit and straightforward installation by mechanics, though a few buyers reported minor hardware differences from factory fasteners and occasional missing grease fittings. The kit carries a long warranty and is positioned as a factory‑quality aftermarket option rather than a performance upgrade, so it is best for owners who want reliable replacement parts at a lower cost than dealer components.
Best for: Balanced owners looking for a practical, cost‑effective factory‑quality replacement for the front lower suspension on a 2013–2019 Infiniti JX35/QX60 who value convenience and reliable fitment.
Less Ideal for: Drivers seeking performance suspension upgrades or custom handling improvements should look at performance control arms rather than this factory‑style replacement kit.
- Complete kit covers both front lower control arms plus outer tie rods and sway bar end links to save time sourcing parts.
- Lower control arms arrive with ball joints pressed in to simplify installation.
- Designed and tested for passenger vehicles with manufacturing in ISO certified facilities to match factory replacement fitment.
- Some customers noted minor differences in supplied fastener sizes compared with factory nuts and washers which can require extra tools.
- Occasional reports of missing grease fittings or premature rubber bushing degradation in a minority of units.
- Not marketed as a performance upgrade so it does not improve handling beyond factory specifications.
Verdict: A convenient, factory‑quality front lower suspension kit for 2013–2019 Infiniti JX35/QX60 owners who want a complete, time‑saving replacement rather than performance parts.
6. Detroit Axle 4‑Piece Front Suspension Kit with Struts, Coil Springs and Sway Bar Links for Infiniti QX60 / Nissan Murano / Pathfinder
| Fitment | 2014-2020 Infiniti QX60, 2015-2024 Nissan Murano, 2013-2020 Nissan Pathfinder, 2013 Infiniti JX35 |
|---|---|
| Kit contents | 2 front strut w/ coil spring assemblies, 2 front stabilizer/sway bar end links |
| Coating | Electrophoretic (electrostatic) coating |
| Manufacturer | Detroit Axle |
This Detroit Axle front suspension kit supplies two complete front strut and coil spring assemblies plus two stabilizer bar end links for direct replacement on compatible Infiniti QX60 and Nissan models. The struts arrive fully assembled so installers do not need a spring compressor or special tools, which speeds up a typical front-end refresh. The coil springs are engineered to restore ride height and improve stability while an electrophoretic coating helps resist corrosion for longer service life. Fitment and mounting points are reported to match factory locations for sway bar link, brake line, and ABS sensor brackets. Real-world benefits include faster installation, restored handling and ride height, and fewer separate part purchases since the kit bundles everything needed for both sides. Some users report inconsistent longevity and a warranty process that can require additional inspection steps, so while many buyers find the kit a convenient, value-oriented replacement, there is variation in long-term durability across units.
Best for: Convenience-driven buyers who want a bundled, ready-to-install front suspension replacement that restores ride height and handling with minimal shop time.
Less Ideal for: Buyers seeking the highest-possible long-term durability or those who prefer to source individual premium components for custom tuning should consider alternatives.
- Comes as a complete kit with two fully assembled strut and coil spring assemblies plus two sway bar end links so no spring compressor is required
- Electrophoretic coating on parts improves corrosion and oxidation resistance
- Coil springs designed to restore ride height and improve handling stability
- Mounting brackets for sway bar link, brake line, and ABS sensor match factory locations for straightforward fitment
- Some buyers report premature failure on a minority of units, indicating variable long-term durability
- Warranty process can require vehicle inspection and documentation which may add time and expense
Verdict: A convenient, ready-to-install front suspension kit that bundles struts, springs, and sway bar links to quickly restore ride height and handling on compatible QX60 vehicles.
7. Detroit Axle Suspension Kit for 2013-2019 Infiniti QX60 / JX35 Nissan Pathfinder
| Fitment | 2013-2019 INFINITI QX60 / JX35, 2013-2019 Nissan Pathfinder |
|---|---|
| Kit contents | 2 Front Struts w/ Coil Springs, 2 Rear Shock Absorbers, Front and Rear Sway Bar Links |
| Brand | Detroit Axle |
| Manufacturer Part Number | 8AQS54068 |
This Detroit Axle suspension kit supplies a full front and rear replacement package for 2013–2019 Infiniti QX60 and JX35 vehicles, including two complete front struts with coil springs, two rear shock absorbers, and front and rear sway bar links. It is intended for owners replacing worn or leaking components to restore ride control and steering stability. The kit is sold as a vehicle-specific bundle so installation covers the main suspension wear items and reduces parts-matching work when servicing at home or at a shop. Users report generally good fitment, firmer ride quality and straightforward installation with common tools, while the parts undergo impact and fatigue testing for durability. Limitations include variable build-finish and occasional quality control issues reported by some buyers, which can require minor fixes during installation. Expect a firmer, refreshed feel compared with worn originals and plan for a post-install alignment.
Best for: Risk-averse mainstream buyers looking to restore safe, predictable handling on an Infiniti QX60 without sourcing multiple parts separately and who prefer a single kit that covers the common worn suspension components.
Less Ideal for: Owners seeking a plush comfort-oriented upgrade or a high-performance suspension tune should consider specialty shock or spring options instead.
- Complete kit replaces both front struts with springs, rear shocks and sway bar links to simplify a full suspension refresh
- Vehicle-specific fitment for 2013–2019 Infiniti QX60 / JX35 reduces parts compatibility guesswork
- Designed and tested for impact, wear and fatigue to aim for reliable service life
- Includes stabilizer links to restore handling and reduce front-end play after installation
- Some buyers reported inconsistent finish or minor parts defects that required on-vehicle adjustments
- Ride can feel noticeably firmer than worn originals, which may not suit drivers seeking a softer ride
Verdict: A single, vehicle-specific package that restores worn suspension components on 2013–2019 Infiniti QX60s for a straightforward, confidence-focused repair.
Choosing the Right Infiniti QX60 Suspension Kit: Key Factors to Consider
Fitment and Compatibility
Correct fitment is essential because suspension components must align with factory mounting points and clear surrounding parts. A kit designed specifically for the Infiniti QX60 reduces the need for adapters, cutting, or re-drilling, which preserves structural integrity and simplifies installation.
Compatibility also affects alignment specs. If components change suspension geometry, you may need additional alignment adjustments or correction components. Prioritize kits that list exact model years and trim compatibility to avoid surprises and extra work.
Ride Quality and Damping Characteristics
Ride quality depends on spring rates and damper tuning. Softer springs and tuned dampers favor comfort and smooth traversal of bumps, while stiffer setups improve body control at the cost of a firmer ride. Consider your driving conditions and whether daily comfort or performance handling is the priority.
Damping characteristics determine how quickly the vehicle settles after a disturbance, which influences both comfort and control. Look for kits that describe rebound and compression behavior so you can match the kit to your expectations for ride firmness and stability.
Durability and Materials
Suspension parts are exposed to road salt, moisture, and debris, so materials and protective finishes matter. Corrosion-resistant coatings, sealed bearings, and hardened steel components extend service life and maintain performance under stress.
Inspect the specification for spring type, shock body construction, and whether bushings or mounts are reinforced. Durable parts reduce long-term maintenance and the likelihood of performance degradation from wear or rust.
Adjustability and Tuning Options
Adjustable kits let you fine-tune ride height and damping to suit driving preferences or load conditions. Height adjustability helps correct stance, clearance, or leveling issues, while adjustable damping permits balancing comfort against body control.
If you plan to carry heavy loads or occasionally tow, choosing a kit with a useful adjustability range helps maintain proper handling. Understand the adjustment steps and whether tools or additional components are required to make changes.
Installation Complexity and Required Hardware
Some kits are bolt-on replacements while others require special tools, additional brackets, or professional alignment after installation. The complexity affects labor time, potential for installation errors, and overall cost to get the system working properly.
Check whether the kit includes all necessary mounting hardware, instructions, and alignment specs. If the kit changes ride height or geometry, factor in the need for alignment, corner balancing, or additional components to ensure optimal performance.
Intended Use and Performance Goals
Different kits target comfort, towing, off-road capability, or sportier handling. Define your primary use first because that determines acceptable compromises between compliance and control. A kit optimized for sport handling may increase road harshness, while one aimed at improved load capacity may add stiffness under heavy weight.
Consider how often you drive on rough roads, whether you carry passengers or cargo frequently, and if you expect to adjust the suspension later. Matching the kit's intended purpose to your day-to-day use yields the best long-term satisfaction.
How We Chose the Best Infiniti QX60 Suspension Kit
We focused on products specifically designed for the Infiniti QX60 and evaluated each option across multiple real-world dimensions. Key criteria included fitment accuracy, which ensures correct alignment points and mounting without modifications; ride quality, assessing how kits balance comfort and control on typical road surfaces; durability and materials, looking for corrosion resistance and robust construction of springs and dampers; and adjustability or tuning range, for drivers who want to dial in ride height or firmness.We also considered ease of installation and availability of mounting hardware, since simpler fitment reduces shop time and potential for errors. Items were excluded if they required extensive vehicle modification, lacked clear fitment details for the QX60, or had consistently poor reports for ride harshness or premature failure. These filters helped us present only practical, well-specified options for this vehicle.
Our full evaluation process is outlined in our review methodology.
FAQ
How do I know which suspension kit fits my Infiniti QX60?
Start by checking the kit's stated model-year and trim compatibility for the Infiniti QX60. Look for detailed fitment notes that list mounting points and whether any additional parts are required. If fitment details are unclear, consult a qualified installer who can confirm whether the kit aligns with your vehicle's configuration.
Will changing the suspension affect alignment or tire wear?
Yes, installing a different suspension kit often changes ride height or geometry, which can alter alignment settings. It is common to require a professional alignment after installation to prevent uneven tire wear and to restore proper handling. Some kits may also recommend specific alignment targets or additional components to correct geometry.
Can I install a suspension kit at home, or should I use a shop?
That depends on your mechanical experience and the kit's complexity. Many bolt-on replacement kits can be installed by a competent DIYer with proper tools and safety equipment. More complex kits that change ride height, require press-in bushings, or need precise torque sequences are better handled by a professional to ensure safety and correct setup.
Does a suspension upgrade kit impact towing or load capacity?
Some kits are designed to improve load handling or reduce sag under towing conditions, while others focus on handling or ride comfort. If you frequently tow or carry heavy loads, choose a kit that specifies improved load capacity or includes stiffer springs and reinforced mounting hardware. Confirm the kit's stated capability before installation.
How long do suspension components usually last on the Infiniti QX60?
Component life varies based on materials, driving conditions, and maintenance. Under normal driving, well-made springs and dampers can last many years, but exposure to harsh roads, salt, or heavy loads can shorten service life. Regular inspections for leaks, corrosion, and unusual noises help catch issues early and extend longevity.
Conclusion
Choosing the right suspension kit for an Infiniti QX60 means balancing fitment accuracy, ride quality, and durability against your intended use. Prioritize kits that list clear compatibility, match your comfort versus performance goals, and offer the durability needed for your driving conditions.Factor in installation complexity and whether adjustability is important for future tuning or load-carrying needs. Following these priorities will help you select a kit that improves driving experience without introducing avoidable downsides.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Suspension Kits Maintenance & Repair Guides
- Explore Suspension & Steering
- Browse all Auto Parts
