Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Infiniti QX60 is showing loose steering, noise, or leaking fluid, choosing the right rack and pinion matters for safety and drivability. A correctly matched unit restores steering precision, reduces unwanted noise and play, and helps prevent premature wear on related suspension components.This guide covers the top shortlisted rack and pinion options for the Infiniti QX60 and explains the practical criteria we used to evaluate them, including fitment accuracy and long-term durability. Read on for what to look for and why these factors matter before you decide on a replacement.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Complete Power Steering Rack and Pinion for 2014-2020 Infiniti QX60 / 2013-2020 Nissan Pathfinder |  |
| Best Budget The cheapest option that still gets the job done reliably | SCITOO Complete Power Steering Rack and Pinion Assembly for Infiniti QX60 / Nissan Pathfinder |  |
| Highest Rated A top-rated pick with lots of positive feedback | A-Premium Power Steering Rack and Pinion Assembly with Inner Tie Rods for Infiniti QX60 / Nissan Pathfinder |  |
| Most Popular A crowd favorite that many people choose with confidence | Detroit Axle Complete Power Steering Rack and Pinion Assembly for 2014-2020 Infiniti QX60 / 2013-2020 Nissan Pathfinder | |
| Best Seller A high-volume bestseller chosen again and again | ANGLEWIDE Power Steering Rack and Pinion Compatible with 2013–2020 Infiniti QX60 and Nissan Pathfinder |  |
1. Detroit Axle Complete Power Steering Rack and Pinion for 2014-2020 Infiniti QX60 / 2013-2020 Nissan Pathfinder
| Manufacturer | Detroit Axle |
|---|---|
| Manufacturer Part Number | 59984 |
| Fitment | 2014-2020 Infiniti QX60; 2013-2020 Nissan Pathfinder |
| Warranty | 10-Year Warranty |
This Detroit Axle complete power steering rack and pinion arrives as a ready-to-install replacement assembly intended for the Infiniti QX60 (2014-2020). It replaces the entire rack and pinion so you do not need to transfer internal components from the old unit, and it ships with new oil and lip seals and has been hydraulically pressure tested to verify internal flow and bypass performance. In practice this means a quicker swap for a technician and reduced risk of fluid leaks or premature internal failure compared with a partial rebuild. The assembly is marketed with a long warranty and aims to restore steering feel and responsiveness to factory levels, which is important for performance-oriented drivers seeking precise steering feedback. Limitations are that fitment is specific to the listed QX60/Pathfinder years and installation may require alignment and professional handling to ensure correct steering geometry and rack mounting. There is also limited public data on long-term durability beyond the manufacturer's testing.
Best for: Performance-oriented buyers who prioritize restoring precise steering feel and reliable hydraulic function on a 2014–2020 Infiniti QX60 and want a factory-style complete replacement rather than piecemeal repair.
Less Ideal for: Owners seeking a universal or multi-vehicle solution or those looking for a budget rebuild option that reuses existing rack components should consider alternatives.
- Complete assembly reduces labor compared with rebuilding the old rack
- Hydraulically pressure tested and supplied with new oil and lip seals to reduce leak risk
- Designed to restore factory steering feel and responsiveness for the specified QX60 years
- Fitment limited to the listed Infiniti QX60 and Nissan Pathfinder model years
- Requires professional installation and post-install wheel alignment for correct steering geometry
Verdict: A ready-to-install, pressure-tested complete rack and pinion built to restore factory steering feel on the specified Infiniti QX60 model years.
2. SCITOO Complete Power Steering Rack and Pinion Assembly for Infiniti QX60 / Nissan Pathfinder
| Fitment | Infiniti JX35/QX60 2013-2020; Nissan Pathfinder 2013-2020 |
|---|---|
| Power type | Hydraulic |
| Includes | Inner tie rods |
| Input port thread | M16 x 1.5 |
| Return port thread | M17 x 1.5 |
This SCITOO complete rack and pinion replaces the hydraulic power steering assembly on Infiniti JX35/QX60 (2013–2020) and Nissan Pathfinder (2013–2020) V6 models. It arrives as a full assembly with inner tie rods and hydraulic ports sized to match the original steering plumbing, so installation replaces the entire rack rather than rebuilding the old unit. The unit is marketed as a budget-friendly aftermarket replacement built from sturdy materials to restore steering function and reduce play or leaks. Practical benefits include fewer steering-system steps during installation since tie rods are included and the preassembled unit can cut shop labor time. Limitations are typical for inexpensive aftermarket racks: you may need alignment and possible minor adjustments after install, and fitment confirmation is important because compatibility depends on exact year and trim. For owners prioritizing cost savings over brand-new factory parts, this is a viable option to get a working hydraulic rack back under the vehicle.
Best for: Budget-conscious Infiniti QX60 owners looking to restore steering function without paying for a factory replacement, and DIYers or repair shops focused on lower-cost part swaps.
Less Ideal for: Buyers seeking exact factory performance, factory-fit parts, or long-term OEM-backed warranty coverage should consider factory replacement options instead.
- Full preassembled hydraulic rack with inner tie rods included reduces installation steps
- Specifically listed to fit Infiniti QX60 and Nissan Pathfinder V6 models 2013–2020
- Matches hydraulic input and return port thread sizes for direct plumbing connections
- Lower-cost aftermarket alternative to factory replacement for budget-conscious repairs
- May require alignment and fine-tuning after install and potential professional fitting
- Aftermarket unit may not match factory lifecycle or exact performance feel
Verdict: A cost-focused, full-replacement hydraulic rack and pinion assembly that restores steering function for Infiniti QX60 owners without the price of factory parts.
3. A-Premium Power Steering Rack and Pinion Assembly with Inner Tie Rods for Infiniti QX60 / Nissan Pathfinder
| Compatible Models | Infiniti JX35/QX60 2013-2020; Nissan Pathfinder 2013-2020 |
|---|---|
| Includes | Inner tie rods and rack pinion boot |
| Material Type | Alloy Steel, Aluminum |
| Mounting Type | MAIN |
This A-Premium rack and pinion ships as a complete hydraulic steering assembly that includes inner tie rods and protective boots, intended as a direct factory-replacement for Infiniti QX60 (JX35/QX60) and related Nissan Pathfinder years listed. It is typically used to restore steering precision and eliminate play or leaks without the need to transfer steering components from the old unit. The unit is made from steel and aluminum and the manufacturer states the assembly is tested to meet or exceed factory specifications. Practical benefits include getting a ready-to-install complete unit that reduces installation time and avoids sourcing separate tie rods, plus a one-year unlimited-mileage quality guarantee for the part. Limitations to consider are that fitment is specific to the QX60/Pathfinder models shown so verify your VIN or part cross-reference, and aftermarket quality and long-term durability can vary compared with factory parts so attentive pre-install inspection is advised.
Best for: Reliability-focused buyers who want a straightforward replacement that restores steering feel and minimizes downtime by using a complete, ready-to-install assembly.
Less Ideal for: Shoppers seeking an exact factory-made steering unit with full manufacturer provenance or those who prefer to rebuild the original rack rather than replace it should consider other options.
- Complete hydraulic rack assembly arrives with inner tie rods and boots to reduce installation steps
- Built from alloy steel and aluminum components for corrosion resistance and strength
- Sold as a direct-fit replacement tailored to Infiniti QX60 and matching Nissan Pathfinder applications
- Includes a one-year unlimited-mileage quality guarantee from the brand
- Aftermarket unit may not match long-term durability or exact tolerances of the original factory steering unit
Verdict: A ready-to-install hydraulic rack and pinion assembly that restores steering quickly for Infiniti QX60 owners seeking a reliability-focused replacement.
4. Detroit Axle Complete Power Steering Rack and Pinion Assembly for 2014-2020 Infiniti QX60 / 2013-2020 Nissan Pathfinder
| Application | 2014-2020 Infiniti QX60; 2013-2020 Nissan Pathfinder |
|---|---|
| Condition | New |
| Steering Type | Hydraulic |
| Kit Includes | Complete power steering rack and pinion assembly |
This Detroit Axle complete power steering rack and pinion arrives as a ready-to-install hydraulic assembly intended to replace a worn or leaking unit on 2014–2020 Infiniti QX60 (and 2013–2020 Nissan Pathfinder). It ships as a full kit so you do not need to transfer cores or chase additional parts, which speeds up repairs and simplifies installation for independent shops or DIYers with moderate mechanical skill. The hydraulic steering design matches factory operation for vehicle feel, and getting a complete assembly reduces fluid contamination risks compared with rebuilding the old rack. The listing notes a long-term warranty which adds ownership peace of mind. On the downside, a complete replacement can be heavier and may require alignment and bleed procedures after fitting, and installation can still be involved on vehicles with tight engine bay access. Expect to budget for alignment and fluids when planning the swap.
Best for: Convenience-driven buyers who prioritize a straightforward replacement and faster turnaround, and owners who want a complete unit to avoid sourcing individual parts or rebuilding the original rack.
Less Ideal for: Buyers who prefer to rebuild the existing rack to save money or who need a steering solution for vehicles outside the specified Infiniti QX60 model years should look elsewhere.
- Ships as a full, ready-to-install power steering rack and pinion assembly so no parts transfer is required
- Hydraulic steering type designed to match factory steering feel
- Simplifies repair and reduces contamination risk compared with rebuilding the old rack
- Includes a long-term warranty for added owner confidence
- Installation still requires alignment and power-steering bleeding and can be challenging in tight engine bays
- Complete assemblies may be bulkier to handle than replacement internal components
Verdict: A convenient, ready-to-install hydraulic rack and pinion replacement built to get Infiniti QX60 owners back on the road without sourcing extra parts.
5. ANGLEWIDE Power Steering Rack and Pinion Compatible with 2013–2020 Infiniti QX60 and Nissan Pathfinder
| Manufacturer | ANGLEWIDE |
|---|---|
| Model | Power Steering Rack and Pinion |
| Compatible vehicles | 2014-2020 Infiniti QX60; 2013-2020 Nissan Pathfinder |
| Manufacturer Part Number | 154177-5247-1434016271 |
This ANGLEWIDE power steering rack and pinion is a full replacement assembly intended to restore steering precision on compatible Infiniti QX60 and Nissan Pathfinder vehicles from the specified years. It is typically used to replace a worn or leaking factory rack and arrives as a complete unit to simplify installation and reduce bench work. Notable features include a helical gear system machined by CNC for smoother meshing and reduced vibration and noise during operation, and guidance to grease tie rod ends and center the steering during installation for best results. In practice the unit should return crisp, predictable steering feel and help eliminate play or wobble when properly aligned. Limitations to consider are that it is an aftermarket part so fit and finish can vary compared with factory parts, and some installation steps such as alignment and tie-rod greasing must be completed by the installer or shop to achieve correct performance.
Best for: Risk-averse mainstream buyers who prioritize restoring reliable, factory-like steering on a maintained Infiniti QX60 and prefer a straightforward complete-unit replacement handled by a trusted mechanic.
Less Ideal for: Shoppers seeking exact factory-sourced parts with guaranteed OEM provenance or those planning extensive performance steering upgrades should consider alternate options.
- Complete rack and pinion assembly reduces need for additional parts during replacement
- Helical gear system with CNC machining aims to minimize steering vibration and noise
- Direct fit compatibility listed for 2013–2020 Infiniti QX60 and 2013–2020 Nissan Pathfinder to simplify selection
- Aftermarket fit and finish may differ from factory-quality parts
- Requires correct steering alignment and tie-rod greasing after installation to perform properly
Verdict: A complete aftermarket rack and pinion built to restore smooth, responsive steering on 2013–2020 Infiniti QX60 and Nissan Pathfinder models.
Choosing the Right Infiniti QX60 Rack and Pinion: Key Factors to Consider
Exact Fitment and Compatibility
Correct fitment ensures the rack and pinion integrates with the QX60 steering linkage, mounts, and steering column without modification. A unit engineered for the vehicle minimizes alignment problems and prevents altered steering geometry.
Choosing a component that matches the factory specifications reduces installation time and the risk of further adjustments. Fitment also affects steering feel and tire wear because mismatched gear ratios or mounting points can introduce uneven loads on suspension components.
Seal Quality and Leak Resistance
Seals are the most common source of steering fluid leaks and premature failure. Higher-quality seals and precise machining at mating surfaces limit seepage, keeping hydraulic pressure consistent and reducing the chance of contamination.
Good leak resistance preserves braking and steering performance and prevents fluid loss that could lead to overheating or internal wear. Evaluate seal materials and whether the unit uses improved seal designs to handle temperature cycles and road contaminants.
Internal Component Durability
The materials and fabrication of internal gears, racks, and bearings determine how long the unit maintains precise engagement and smooth operation. Hardened gear surfaces and quality bearings reduce wear that causes steering play and roughness over time.
Units built with attention to internal tolerances tend to hold alignment better and require fewer subsequent adjustments, making them a better long-term investment for a vehicle that sees mixed driving conditions.
Noise and Vibration Characteristics
Steering noise and vibration often originate inside the rack and pinion from wear, inadequate damping, or poor gear mesh. Choose units that specify attention to noise reduction through tighter tolerances or added dampening features.
Lower operational noise improves perceived quality and helps you detect new problems earlier. Consider how the unit addresses common noise sources like loose bearings, degraded bushings, or inconsistent lubrication paths.
Ease of Installation and Serviceability
A rack and pinion designed for straightforward installation reduces labor time and potential for installation errors. Features that help include correct mounting points, pre-assembled tie rod ends or boots, and clear alignment references.
Serviceability matters if you expect to rebuild or replace seals later. Units that allow simpler access to wear components or come with clear instructions lower overall maintenance burden and make future repairs less disruptive.
Warranty and Technical Support
A meaningful warranty signals confidence in the part and provides protection against early failures or manufacturing defects. Look for terms that cover seals and internal failures for a sensible period and clarify what conditions are excluded.
Technical support from the manufacturer or supplier can aid in fitment questions or trouble-shooting installation issues. Access to clear documentation and responsive support reduces the chance of a mismatch or incorrect installation.
How We Chose the Best Infiniti QX60 Rack and Pinion
We shortlisted products based on criteria that directly affect steering performance and long-term reliability for the Infiniti QX60. Primary filters included exact vehicle fitment to the QX60 chassis and year range, factory-equivalent steering response and gear ratio, and the quality of seals and materials that determine resistance to leaks and wear. We also prioritized units with robust internal components and surface treatments that resist corrosion, plus options designed for straightforward installation and available technical support.Excluded items included universal or non-vehicle-specific units, components lacking documented fitment to the Infiniti QX60, and parts with known quality or warranty concerns. In short, we focused on units that match QX60 specifications, minimize steering play and noise, resist leaks, and offer durability under typical driving conditions.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common steering rack symptoms I should watch for on an Infiniti QX60?
Common signs include increased steering play, grinding or knocking noises when turning, difficulty returning to center, or visible fluid leaks. These symptoms often progress gradually, so addressing them early can prevent further damage to steering linkage or suspension parts.
Can a leaking rack and pinion be repaired, or does it need full replacement?
Minor seal leaks can sometimes be addressed with seal replacement or a rebuild, depending on the unit's design and condition. However, extensive internal wear, corrosion, or multiple leak points usually indicate a full replacement is the more reliable solution.
How does steering rack noise indicate different types of problems?
Rattling or knocking often points to worn bearings or loose internal components, while whining or groaning can indicate low steering fluid or internal binding. Distinguishing the noise type helps narrow whether the issue is mechanical wear, lubrication, or mounting related.
Is a power rack and pinion rebuild a viable option for the QX60?
A rebuild is viable when the housing and main components are in good condition and only wear items like seals and bushings need replacement. Rebuilds depend on the availability of quality parts and a technician experienced with the QX60 steering system.
Will replacing the rack and pinion fix uneven tire wear or steering pull?
Replacing a worn rack can address steering play that contributes to uneven tire wear or a pull. However, proper alignment and inspection of suspension components are also necessary to ensure the underlying causes are resolved.
How should I prepare my Infiniti QX60 for a rack and pinion installation?
Ensure the vehicle is on a level surface and the steering is centered before removal. Have alignment specifications and a qualified installer ready, and plan for a wheel alignment after installation to restore proper toe and tracking.
Conclusion
Choosing the right rack and pinion for an Infiniti QX60 comes down to prioritizing exact fitment, leak resistance, and internal durability. These factors determine how well the steering responds, how long the unit lasts, and how much future maintenance you will face.Balance noise and vibration characteristics, ease of installation, and warranty coverage when making your decision. Addressing symptoms early and selecting a component built to QX60 specifications will minimize downtime and help restore safe, predictable steering.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Rack and Pinion Steering Systems Maintenance & Repair Guides
- Explore Suspension & Steering
- Browse all Auto Parts
