Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
When your Infiniti G35 cooling fan is working well, you avoid overheating, reduced performance, and expensive repairs. Choosing the right fan matters because airflow capacity, motor durability, and fitment determine how effectively your engine stays cool in traffic and under load.This guide covers seven shortlisted cooling fans for the Infiniti G35. We explain why each made the list and the evaluation criteria used, so you can pick a fan that matches your driving conditions and maintenance priorities.
Looking for other parts? See all Infiniti G35 parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Dorman 620-429 Engine Cooling Fan Assembly for Select Infiniti/Nissan Models |  |
| Best quality Built to a higher standard if you want something more solid | TRQ Dual Radiator & Condenser Fan Assembly for Infiniti G35 |  |
| Best Value The sweet spot between price and what you get | TYC Replacement Radiator/Condenser Cooling Fan Motor (631210) |  |
| Best budget The cheapest option that still gets the job done reliably | JDMSPEED 10" Electric Slim Radiator Cooling Fan |  |
| Highest Rated A top-rated pick with lots of positive feedback | BOXI Dual Radiator Condenser Cooling Fan Motor Assembly for Nissan 350Z / Infiniti G35 (2003–2007) |  |
| Most popular A crowd favorite that many people choose with confidence | UPGR8 Universal 14" 12V Slim Electric Radiator Cooling Fan with Mounting Kit |  |
| Best Seller A high-volume bestseller chosen again and again | DNA Motoring 12" High-Performance Slim Electric Radiator Fan with Mount Kit |  |
1. Dorman 620-429 Engine Cooling Fan Assembly for Select Infiniti/Nissan Models
| Voltage | 12 Volts |
|---|---|
| Wattage | 80 watts |
| Maximum Rotational Speed | 3500 RPM |
| Noise Level | 4 Decibels |
This Dorman engine cooling fan assembly replaces the radiator fan assembly on select Infiniti G35 and Nissan 350Z models and is sold as a complete, ready-to-install unit. It is typically used to restore cooling after a failed fan motor or to replace a damaged shroud; the assembly includes motors and fans matched to the original design so installation is straightforward for a DIYer or a shop. Notable features listed include a 12 volt motor, tested performance to match factory cooling, and a machined exterior finish. In practice the assembly delivers reliable airflow and often drops in without modification, reducing installation time compared with piecing together separate components. Some buyers report quieter operation than the original fans while others note variability in longevity, so service life can depend on use and conditions. A few customers experienced shipping damage, so inspect the shroud on arrival. For Infiniti G35 owners this is a convenient, cost-effective factory-quality replacement when you need to restore proper engine cooling.
Best for: Balanced buyers who want a reliable, ready-to-install replacement that restores cooling with minimal fuss and reasonable cost, especially those comfortable doing a straightforward DIY install or using a local shop.
Less Ideal for: If you need a high-performance aftermarket cooling upgrade or a lifetime-long warranty solution, this standard replacement assembly may not meet those specialized requirements.
- Sold as a complete assembly so installation is simpler than replacing separate motors or blades
- Engineered and tested to match factory cooling performance for compatible G35/350Z years
- Uses a 12 V motor with up to 3500 RPM for effective airflow
- Generally good fitment reported by multiple buyers with minimal modification required
- Some customers reported shorter-than-expected service life on a minority of units
- Occasional shipping damage to the shroud has been reported requiring returns or replacements
Verdict: A complete, factory-quality replacement fan assembly that makes restoring proper cooling on compatible Infiniti G35 and Nissan 350Z models fast and straightforward.
2. TRQ Dual Radiator & Condenser Fan Assembly for Infiniti G35
| Compatible Models | Infiniti G35 2007-2008 4 Door Sedan |
|---|---|
| Voltage | 12 Volts |
| Power Connector Type | 2-Pin |
| Fan Quantity | 2 |
This TRQ dual fan assembly replaces the factory radiator and condenser cooling fans for compatible Infiniti G35 applications and comes pre-assembled to simplify installation. It includes two fans in a single shroud intended to restore or improve cooling airflow for the radiator and AC condenser, which is useful when the original assembly is worn or a vehicle has cooling problems. The product ships as a complete unit with a 2-pin power connector and is described as a direct replacement to match factory fitment, so most owners can bolt it in without modifying mounting points or wiring. Practical benefits include quicker installation compared with replacing individual components and restored cooling performance that helps prevent overheating under load. Reported shortcomings include occasional durability issues with plastic supports on some units and the need to confirm exact fit for specific production dates and transmission types before purchase. Expect a straightforward swap for the G35 when the fitment chart matches your model and production date.
Best for: Performance-oriented owners who prioritize reliable cooling under load and want a ready-to-install, direct-fit replacement to restore factory cooling on their Infiniti G35.
Less Ideal for: Drivers seeking a custom high-performance fan upgrade or those unwilling to verify production-date compatibility should consider purpose-built aftermarket cooling solutions or consult a specialist.
- Pre-assembled dual-fan shroud for faster, simpler installation
- Designed as a direct replacement to match factory mounting and connectors
- Restores cooling airflow for radiator and condenser to address overheating
- Includes standard 12V, 2-pin electrical connection for plug-and-play wiring
- Some reports of broken plastic supports under prolonged use
- Fitment can vary by production date and transmission so verification is required
Verdict: A convenient, performance-focused direct-replacement dual fan assembly that restores factory cooling for the Infiniti G35, provided you confirm exact fitment for your production date.
3. TYC Replacement Radiator/Condenser Cooling Fan Motor (631210)
| Speed | 416 RPM |
|---|---|
| Voltage | 12 Volts |
| Manufacturer Part Number | 631210 |
| OEM Part Number | 21487-CD00A |
This TYC cooling fan motor replaces a failed radiator/condenser fan on the Infiniti G35 and restores airflow for engine and A/C cooling. It is a new, balanced motor sold as a factory-quality replacement and arrives test-fitted to ensure consistent fit with the G35 fan shroud. Installation is typically straightforward for DIYers: unbolt the old motor, transfer the fan blade, and plug in the connector or splice if needed. The 12-volt, 416 RPM motor provides adequate cooling to reduce overheating and improve A/C performance according to user reports. Practical benefits include a reliable plug-and-play fit in most G35 applications and lower cost compared with dealer units. Limitations to expect are occasional long lead wires that may need securing and the motor may not match OEM longevity in every case, so buyers should be prepared to inspect connectors and mounting during installation. Overall it is a sensible replacement for bringing cooling back to spec without an expensive dealer part.
Best for: Practical optimizers who want a cost-effective, do-it-yourself replacement to restore cooling and A/C performance on an Infiniti G35 without buying dealer parts.
Less Ideal for: Buyers seeking the absolute longest-lived, dealer-branded motor or those unwilling to do minor wiring or mounting tweaks should consider a factory-branded alternative.
- Designed as a direct, balanced replacement for factory fan installations on the G35
- All-new components tested for fit to ensure consistent mounting and alignment
- Plug-and-play electrical fit in many G35 cases reducing need for modifications
- Lower cost alternative to dealer or OEM-branded fan motors
- Wire length may be longer than stock on one side and require routing or shortening
- Not guaranteed to match OEM long-term durability in every vehicle
Verdict: A budget-friendly, direct-fit fan motor that restores cooling on the Infiniti G35 with solid fit and function for DIY repairs.
4. JDMSPEED 10" Electric Slim Radiator Cooling Fan
| Voltage | 12 Volts |
|---|---|
| Wattage | 80 watts |
| Air Flow Capacity | 1750 Cubic Feet Per Minute |
| Maximum Rotational Speed | 2250 RPM |
This 10-inch JDMSPEED electric radiator fan is a basic, low-wattage cooling fan intended to supplement a vehicle cooling system as either a pusher or puller. It is typically mounted to the radiator or condenser with the included bracket kit and wired to a switched circuit or relay so it runs when extra airflow is needed. Notable features include a slim 2.56-inch profile for tight engine bays, a reversible blade orientation, and a claimed 1750 CFM peak airflow while drawing about 12.7 amps. In practice the fan is useful for improving temperature control at idle, helping the A/C condenser and radiator, or as an auxiliary fan for an Infiniti G35 that needs extra cooling without cutting into clearance. Expect straightforward bolt-on installation but minimal vibration isolation and basic plastic construction compared with premium units. The fan balances strong airflow and low noise at an attractive price, though long-term durability will depend on mounting and exposure to heat and road debris.
Best for: Budget-conscious owners looking to add auxiliary cooling to an Infiniti G35 who prioritize low cost and simple installation over premium materials.
Less Ideal for: Drivers seeking a lifetime, heavy-duty factory-quality replacement or those who need a noise-focused or fully sealed marine-grade fan should consider higher-end options.
- Slim 2.56-inch profile fits tight engine bay spaces
- Reversible operation lets you use it as a pusher or puller
- Relatively high claimed airflow (1750 CFM) for a 10-inch fan
- Low electrical draw (~12.7 A) compared with higher-wattage units
- Plastic construction is basic and may be less durable than higher-end fans
- Universal fit means additional brackets or trimming could be required for clean Infiniti G35 installation
Verdict: A very affordable, slim auxiliary fan that delivers strong airflow for its size but uses basic plastic construction, making it a solid budget upgrade for an Infiniti G35 rather than a premium long-term replacement.
5. BOXI Dual Radiator Condenser Cooling Fan Motor Assembly for Nissan 350Z / Infiniti G35 (2003–2007)
| Power Connector Type | 4-Pin |
|---|---|
| Voltage | 12 Volts |
| Cooling Method | Air |
| Material | Nylon |
| Noise Level | 50 Decibels |
This BOXI dual radiator/condenser fan assembly replaces the factory cooling fans and mounting shroud on Nissan 350Z and Infiniti G35 models (automatic transmission only). It arrives as a complete plug-and-play assembly with the 4-pin connector and factory-style mounting points so most DIYers or shops can swap it in without modifying wiring or brackets. The nylon shroud and fan motors are tested to meet manufacturer-equivalent specifications and are intended to restore proper cooling performance at idle and under load. In practice the unit solves overheating at low speeds and returns radiator and A/C condenser airflow to factory behavior. Some owners report the assembly runs a bit louder than original equipment and there are occasional reports of early failures, so inspecting electrical connections and testing the fans on the bench before final installation is sensible. Overall it is a practical, cost-effective replacement when you need to restore reliable cooling on an older G35 or 350Z.
Best for: Reliability-focused buyers who prioritize restoring factory cooling performance with an affordable, ready-to-install replacement to avoid overheating and maintain engine longevity.
Less Ideal for: Buyers seeking a quiet performance upgrade or a noise-optimized aftermarket fan should consider alternatives focused on lower sound levels or higher-duty commercial units.
- Direct-fit assembly with factory-style plugs and mounting for straightforward installation
- Complete shroud plus dual fans restores both radiator and condenser airflow
- Manufactured to meet or exceed OEM specifications and 100% tested before shipment
- Nylon construction reduces corrosion risk compared with metal components
- Some users report the fans are louder than factory units
- Isolated reports of premature failure mean occasional quality variance
Verdict: A plug-and-play dual-fan and shroud assembly that restores factory cooling performance on mid-2000s Infiniti G35 and Nissan 350Z models.
6. UPGR8 Universal 14" 12V Slim Electric Radiator Cooling Fan with Mounting Kit
| Voltage | 12 Volts |
|---|---|
| Wattage | 90 watts |
| Power Connector Type | 4-Pin |
| Thickness | 2.5 Inch |
| Size | 14 Inch |
This UPGR8 14-inch slim electric cooling fan is a budget-friendly universal option for increasing airflow through a radiator or condenser. It is a single-speed, 12V, 90W fan that ships with mounting brackets and tie straps so you can install it as either a push or pull fan. In practice it is typically used to replace or supplement a factory fan on vehicles that need more consistent cooling at idle or when towing. The slim 2.5-inch profile helps fit in tight engine bays and the included hardware makes it possible to mount without fabricating custom brackets, though the manufacturer recommends professional installation. Buyers report strong airflow for the size and generally quiet operation, but continuous high-load duty can stress the motor and some users have experienced mount failures when fittings were not secured. If you plan to use it on an Infiniti G35, expect to adapt the universal kit to the car’s mounting points and consider a quality fan controller and stout mounts for reliable long-term performance.
Best for: Convenience-driven buyers who want an affordable, straightforward cooling upgrade that improves low-speed and A/C cooling without a lot of parts sourcing or complex choices.
Less Ideal for: Drivers who need a factory-direct replacement with bolt-in fit or variable-speed performance should choose a model designed specifically for the Infiniti G35 or a PWM-controlled fan setup instead.
- Slim 2.5-inch profile fits tight engine bays and can be used as push or pull.
- Comes with mounting brackets and zip ties so basic installation is possible without custom parts.
- Strong airflow for size, improving low-speed and idle cooling and condenser performance.
- Single 4-pin power connector simplifies wiring to a fan controller or vehicle harness.
- Single-speed motor offers no variable output, so temperature control requires an external controller.
- Universal fit means adapter work and custom mounting may be required for a secure install on the G35.
- Motor may be stressed under continuous high-heat, heavy-duty use without a robust controller or proper mounting.
Verdict: A low-cost, slim universal fan that boosts low-speed cooling for the G35 but requires adaptation and a proper controller for reliable long-term use.
7. DNA Motoring 12" High-Performance Slim Electric Radiator Fan with Mount Kit
| Voltage | 12 Volts (DC) |
|---|---|
| Wattage | 80 watts |
| Power Connector Type | 4-Pin |
| Maximum Rotational Speed | 2250 RPM |
| Air Flow Capacity | 1730 Cubic Feet Per Minute |
This DNA Motoring 12-inch slim electric radiator fan is a compact aftermarket cooling fan intended to increase airflow through a radiator or condenser when installed on an Infiniti G35. It is typically mounted as a push or pull fan using the supplied mounting tabs and zip-tie style kit, and can be wired to a switch, temperature sensor, or factory fan circuit. Notable features are the slim profile for tight engine-bay clearance, a claimed 1730 CFM airflow and a 4-pin power connector for straightforward 12 V hookup. In practice the fan provides useful supplemental cooling for stock and mildly tuned engines and is quiet at low voltages while delivering stronger flow near 12–13 V. Limitations to keep in mind are that some installations require reversing the blade or wire polarity to get pushing versus pulling action, the mount kit is basic and may need custom brackets for a secure, permanent fit, and airflow may be marginal for heavily modified or high-heat setups. For a risk-averse G35 owner this is a budget-friendly way to improve cooling with modest installation work.
Best for: Risk-averse mainstream G35 owners who prioritize reliable, low-cost ways to lower operating temperatures without extensive vehicle modification.
Less Ideal for: Drivers planning large power upgrades, racing use, or who need factory-level climate control performance should consider higher-capacity or dedicated OEM-quality fans instead.
- Slim profile fits tight engine bays common on the G35 and allows room for other modifications
- High claimed airflow for its size (1730 CFM) to help radiator and condenser cooling
- Includes simple mounting tabs and wiring options so it can be used with a switch or temperature sensor
- 4-pin power connector and common 12 V compatibility make wiring straightforward
- Basic mounting kit may require fabrication or sturdier brackets for a permanent fit
- May need blade or polarity reversal to achieve push versus pull operation
- Not powerful enough alone for heavily upgraded engines or extreme cooling demands
Verdict: A compact, affordable supplemental fan for the Infiniti G35 that improves cooling in everyday use but is not a substitute for higher-capacity systems.
Choosing the Right Infiniti G35 Cooling Fan: Key Factors to Consider
Airflow Capacity and Direction
Airflow capacity, usually measured in cubic feet per minute or described by fan diameter and blade profile, directly affects how much heat is removed from the radiator. Higher airflow helps maintain lower coolant temperatures when the engine is working hard or when airflow through the grille is limited by slow driving.
Direction matters because the fan needs to pull air through the radiator or push it depending on the vehicle's original cooling setup. Matching the correct airflow direction prevents reduced cooling efficiency and ensures consistent thermal performance across different driving conditions.
Motor Type and Electrical Demand
The cooling fan motor determines how consistently the fan runs and how long it lasts. Look for motors with sealed bearings and thermal protection if available, because these features reduce wear and the risk of electrical failure.
Electrical demand is critical since a high-current fan can overload wiring or place extra load on the charging system. Verify connector type, fuse ratings, and current draw to avoid electrical issues when installing a replacement fan.
Fitment and Mounting Compatibility
Correct fitment ensures the fan installs without cutting, relocating mounts, or modifying the radiator shroud. A precise fit reduces installation time and helps maintain the original airflow path, which affects cooling efficiency and noise.
Check mounting hole alignment, overall diameter, and clearance to surrounding components such as the condenser, intercooler, or intake plumbing. Ensuring fitment reduces risk of rubbing, vibration, and premature wear.
Blade Design and Noise
Blade shape, pitch, and count influence both airflow efficiency and the noise level of the fan. Wider, well-shaped blades can move more air at lower speeds, which reduces audible noise during normal driving.
Balanced blades and quality construction minimize vibration, which preserves bearings and mounting points. If you often drive in urban settings or at idle traffic, quieter operation can make a noticeable difference in cabin comfort.
Integration with Cooling Controls
How a fan integrates with temperature sensors, relays, and the vehicle's control logic affects responsiveness and reliability. Fans that match the vehicle's control strategy will engage at the intended temperatures and run intervals.
Consider whether the replacement supports variable-speed operation or is a single-speed unit. Variable-speed fans can improve temperature regulation and reduce run time, while single-speed units are simpler but may cycle more frequently.
Durability and Maintenance
Long-term durability depends on materials, sealing, and bearing quality. Fans built with corrosion-resistant hardware and durable plastics will withstand engine-bay heat and exposure better than lower-quality units.
Maintenance considerations include ease of access, availability of replacement motors or blades, and whether the assembly allows servicing without full removal. Prioritizing durable construction reduces the likelihood of repeat replacements.
How We Chose the Best Infiniti G35 Cooling Fan
We focused on components and assemblies designed specifically for the Infiniti G35 and evaluated entries against measurable, category-relevant criteria. Key factors included airflow volume and direction to ensure adequate heat rejection from the radiator, motor design and rated lifespan to limit failure risk, and electrical draw and connector compatibility to avoid charging system strain. We also checked fan blade design and balance for noise and vibration control, as well as overall fitment accuracy to minimize installation changes.We excluded universal or generic fans that require major modification, and we did not consider items that lacked documented specifications or OEM-equivalent mounting points. The result is a list of options that match the G35's cooling demands, offer proven durability, and install with minimal adaptation.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common cooling fan symptoms on an Infiniti G35?
Common signs include the engine running hotter than normal, the vehicle reaching operating temperature quickly in traffic, or the fan not spinning when the engine is warm. You may also notice reduced HVAC performance or an illuminated warning light that indicates elevated coolant temperature.
Can I replace the radiator fan myself on an Infiniti G35?
Many owners can handle a radiator fan replacement with basic tools and by following safety precautions, such as disconnecting the battery and allowing the engine to cool. The job usually involves draining minimal coolant or removing trim to access mounting points. Complex electrical connections or tight clearances may require more experience.
How do I know if I need a fan motor or a full cooling fan assembly?
If the motor is accessible and the blade and shroud are intact, replacing just the motor may be sufficient. However, if mounting points, the shroud, or the blade show damage or excessive wear, a full cooling fan assembly replacement ensures proper fit and balanced operation.
Will using a higher-flow electric cooling fan improve cooling performance?
A higher-flow electric fan can increase airflow and lower coolant temperatures, especially at low vehicle speeds. However, it is important to ensure the motor draw and physical fit are compatible with the vehicle. Overly aggressive airflow can sometimes create installation or electrical issues.
Why might a cooling fan not run even when the engine is hot?
Reasons include a failed motor, a blown fuse or relay, a faulty temperature sensor, or damaged wiring and connectors. Diagnosing the issue typically involves checking fuses and relays, testing voltage at the fan connector, and verifying the temperature signal to the fan control system.
Conclusion
Picking the right Infiniti G35 cooling fan means balancing airflow, electrical compatibility, and fitment. Prioritize options that match the vehicle's mounting points and electrical system, and that offer durable motor construction to reduce future failures.Tradeoffs include choosing between quieter operation and maximum airflow, or between a simple single-speed unit and a more flexible variable-speed design. Use the factors above to match a fan to your driving habits and maintenance preferences.
Explore More:
- Check out all Infiniti G35 parts & accessories
- Explore Cooling Fans Maintenance & Repair Guides
- Explore Cooling System
- Browse all Auto Parts
