Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you own an Infiniti G35, choosing the right oil cooler lines matters for engine longevity and reliable cooling under load. Faulty or worn lines can lead to leaks, pressure loss, and elevated oil temperatures that affect performance and component life.This guide presents seven shortlisted Infiniti G35 oil cooler lines selected for their construction, fitment accuracy, and leak resistance. We evaluated each option against routing compatibility and installation ease to help you pick the right replacement for routine maintenance or repair. Read on for the criteria we used and what to expect during installation.
Looking for other parts? See all Infiniti G35 parts & accessories.
Top Picks at a Glance
1. Motoforti Oil Cooler Hose for Infiniti G35 FX35 FX45 M35 M45 (2003–2009)
| Position | Inner |
|---|---|
| Manufacturer | Motoforti |
| Material | Rubber |
| OE Number | 21306-AQ805 |
This Motoforti oil cooler hose is a rubber replacement meant to restore coolant flow between the oil cooler and the engine on compatible Infiniti G35, FX35, FX45, M35, and M45 models from the 2003–2009 era. It is used as a direct replacement for a worn or leaking line and installs without drilling or modification. The hose is described as heat and corrosion resistant, sized to the OE number 21306-AQ805, and supplied with two clamps for a complete fit. In practice this means a straightforward repair that helps the engine maintain proper oil temperature by keeping the cooler loop sealed and flowing. Limitations include its non-OEM status and that rubber hoses will eventually age and require replacement again under heavy heat or long-term exposure. For routine maintenance or timely repair on the specified Infiniti models it offers a simple, low-complexity solution that gets a cooling circuit back to service quickly.
Best for: Balanced buyers who want a straightforward, cost-conscious repair for their Infiniti cooling circuit and prefer a ready-to-install replacement that gets the job done with minimal fuss.
Less Ideal for: Those seeking factory-branded or long-term lifetime upgrades should consider higher-end or OEM-sourced hoses and fittings instead.
- Direct-fit replacement for specified Infiniti models matching OE number 21306-AQ805
- Made from durable rubber designed to resist high temperatures and corrosion
- Includes clamps for easier installation without drilling or modification
- Restores oil cooler coolant flow to help maintain engine oil temperature
- Aftermarket rubber construction is not a factory-branded part and may age sooner than some OEM materials
Verdict: A ready-to-install rubber replacement hose that restores oil cooler coolant flow on specified Infiniti G35/FX/M models for a quick, practical repair.
2. Czomoizc Oil Cooler Hose 21306-AQ805 Compatible with Infiniti FX35/G35/M35 3.5L
| Part Number | 21306-AQ805 |
|---|---|
| Application | Infiniti FX35/G35/M35 3.5L |
| Material Type | Synthetic Rubber |
| Included Components | 1x Oil Cooler Hose |
This Czomoizc oil cooler hose is a direct-replacement line sold as part number 21306-AQ805 for Infiniti FX35 (2003-2008), G35 (2004-2006) and M35 (2006-2008) with the 3.5L engine. It installs in place of the factory cooler hose to route oil between the engine and cooler, and is made from synthetic rubber designed to withstand normal engine bay temperatures and fluid exposure. The listing includes one hose and the manufacturer states each piece is inspected before shipping. For a performance-oriented buyer this part provides a straightforward way to restore ailing or leaking cooler plumbing without modifying the car, and the single-piece replacement simplifies installation compared with repairing sections of damaged hose. Limitations are that this is a basic replacement hose without reinforced braided layers or upgraded fittings for high-boost or motorsport use, so buyers seeking upgraded pressure or track durability should consider performance-specific lines. Fitment is limited to the Nissan/Infiniti models listed so confirm year and engine before ordering.
Best for: Performance-oriented owners who want a reliable factory-style replacement to restore oil cooler routing on a 3.5L Infiniti or Nissan and prefer an easy, bolt-in fix over custom plumbing.
Less Ideal for: People building high-boost or track engines who need reinforced or stainless braided oil cooler lines should choose an aftermarket performance line instead.
- Direct-fit replacement for 21306-AQ805 applications simplifies installation
- Made from synthetic rubber suitable for standard engine oil and temperature exposure
- Sold as a single inspected unit so you replace the failed section without fabrication
- Compatible with common Infiniti G35/FX35/M35 3.5L models listed on the product page
- Not presented as a reinforced or performance braided line for high-pressure or track use
- Limited to the specific listed model years and engine configuration
Verdict: A straightforward factory-style replacement hose for restoring oil cooler plumbing on 3.5L Infiniti G35/FX35/M35 models without modification.
3. LSSOCH Oil Cooler Hose with 2 Clamps (21306-AQ805) — Compatible with 2003–2008 Infiniti FX35/G35 and 2006–2008 M35 AWD
| Part Number | 21306-AQ805 |
|---|---|
| Application Models | Infiniti FX35 2003-2008 AWD; G35 2004-2006 AWD; M35 2006-2008 AWD |
| Material Type | Synthetic Rubber |
| Included Components | Hose with 2 clamps |
This LSSOCH oil cooler hose replaces the factory line between the oil cooler and engine on AWD Infiniti 3.5L V6 models from the mid 2000s. It is constructed from synthetic rubber and ships with two clamps, so installation is a straightforward swap for owners doing a DIY repair or a quick garage replacement. The hose matches the listed OEM part number 21306-AQ805 and targets common failure points where aging rubber or cracking causes leaks. Practical benefits include simple compatibility with the stated Infiniti FX35, G35, and M35 AWD applications and a compact kit that includes clamps so you do not need to source additional hardware. Limitations are that fitment is restricted to the AWD models specified and the part is a basic replacement with no upgraded materials or extended-life features, so it restores factory-level function rather than improving durability beyond stock. Expect a cost-effective fix for a leaking or failed oil cooler line when matching your vehicle’s application.
Best for: Practical optimizers seeking a low-cost, no-frills replacement part to restore factory cooling system function without spending on premium upgrades.
Less Ideal for: Buyers who want improved durability, braided or upgraded oil cooler lines, or who need parts for non-AWD or non-3.5L Infiniti models should look at other options.
- Direct replacement for Infiniti part number 21306-AQ805 for the listed AWD 3.5L models
- Included clamps simplify installation and reduce additional purchases
- Synthetic rubber construction matches common factory material and provides standard flexibility
- Fitment limited to AWD Infiniti FX35, G35, and M35 3.5L models listed
- No upgraded materials or performance enhancements over factory-spec hose
Verdict: A budget-friendly, vehicle-matched replacement hose that restores factory oil cooler function for specified AWD Infiniti 3.5L models.
4. NewYall Oil Cooler Hose with Clamps for Infiniti 3.5L V6 AWD (FX35/G35/M35)
| Compatible engines | 3.5L V6 AWD |
|---|---|
| Fitment | Infiniti FX35 2003-2008, G35 2004-2006, M35 2006-2008 |
| Material Type | Rubber, Silicone |
| Unit Count | 1.0 Count |
This NewYall oil cooler hose is a purpose-built replacement for Infiniti FX35 (2003-2008), G35 (2004-2006), and M35 (2006-2008) 3.5L V6 AWD engines. It includes the molded rubber/silicone hose and clamps so you can swap a leaking or degraded cooler line without sourcing separate hardware. Typical use is a straightforward underhood replacement during a coolant/oil cooler repair or preventive maintenance to stop leaks and restore routing integrity. The rubber and silicone construction is common for OEM-style hoses and balances flexibility with heat resistance for engine bay temperatures. Practical benefits include one-piece fitment for the specified AWD V6 applications and cost savings compared with dealer parts. Limitations are typical of budget aftermarket lines: long-term durability may vary versus higher-end or factory parts and you should verify condition of mating fittings when installing. For many DIYers this part offers quick, low-cost restoration of the cooler plumbing when the original hose fails.
Best for: Budget-conscious Infiniti owners who prioritize a low-cost, ready-to-install replacement to stop leaks and get their mid-2000s 3.5L AWD back on the road quickly.
Less Ideal for: Owners seeking long-term, high-mileage durability or an exact factory-sourced part should consider higher-end or dealer replacement options instead.
- Built to fit Infiniti FX35/G35/M35 3.5L V6 AWD applications for direct replacement
- Includes clamps so you get a ready-to-install assembly without sourcing hardware
- Rubber and silicone construction that offers flexibility and heat resistance
- Low-cost option that reduces repair expense compared with dealer parts
- Aftermarket longevity can vary compared with higher-end or factory-quality hoses
Verdict: A practical, inexpensive direct-fit oil cooler hose assembly for mid-2000s Infiniti 3.5L AWD models that gets leaking cooler lines fixed quickly.
5. QAGGUM Transmission Oil Cooler Hose for Infiniti G35/FX35/M35 (replaces 21306-AQ805)
| Compatible Models | Infiniti FX35 2003-2008, G35 2004-2006, M35 2006-2008 |
|---|---|
| Replaces Part | 21306-AQ805 |
| Material Type | Rubber |
| Includes | Two clamps |
This transmission oil cooler hose connects the engine oil cooler to the pressurized oil circuit, returning high-temperature oil to the engine to help maintain stable oil temperatures. It is intended as a direct replacement for part 21306-AQ805 on Infiniti G35 (2004–2006), FX35 (2003–2008) and M35 (2006–2008). Made from heat-resistant rubber, the hose aims to resist corrosion and aging while providing a tight seal under operating pressure. Installation is straightforward for a competent DIYer because the kit includes two clamps and requires no extra hardware. In use the hose helps keep oil temperatures in check, which supports engine longevity and consistent performance during normal driving. Some buyers reported minor trimming or slight adjustment was needed for a perfect fit on certain model years, so expect basic fitting or minor modification in rare cases. The product is a budget-friendly alternative to factory lines while delivering reliable cooling performance when installed correctly.
Best for: Reliability-focused owners who prioritize a durable, factory-replacement style fix to keep transmission oil temperatures stable and extend component life.
Less Ideal for: Drivers seeking an upgraded performance cooler line or custom fit solution should consider higher-end aftermarket performance hoses or professional-fit options.
- Made from heat-resistant rubber for corrosion and aging resistance
- Supplies two clamps so no additional installation hardware is required
- Specifically listed to replace part 21306-AQ805 for targeted Infiniti models
- Helps maintain stable transmission oil temperature to protect engine components
- May require minor trimming or adjustment for an exact fit on some vehicles
Verdict: A heat-resistant, budget-minded replacement hose built to restore proper transmission oil cooling on specified Infiniti G35/FX35/M35 models.
6. XYWZV Oil Cooler Hose with Clamps for Nissan 3.5L / Infiniti G35 M35 FX35 (replaces 21306-AQ805)
| Compatible Engines | Nissan 3.5L |
|---|---|
| Fitment Models | Infiniti G35 2004-2006, M35 2006-2008, FX35 2003-2008 |
| Material Type | Plastic, Rubber |
| Unit Count | 1.0 Count |
This oil cooler hose assembly is a direct-fit replacement intended for Nissan 3.5L engines and compatible Infiniti models including the G35, M35, and FX35. It is supplied as a single hose made from plastic and rubber and comes with clamps to simplify installation without drilling or modifications. In use it routes oil to and from the oil cooler to help maintain proper oil temperature and protect the engine under normal driving conditions. Buyers will appreciate the factory-style fit and the included clamps that make a quick garage or roadside swap feasible for DIYers comfortable with basic mechanical work. Some customers reported clamps that can pinch or damage the hose material under heavy tightening, so swapping to heavier-duty clamps during installation may be wise. A few reviewers noted minor trimming was required for perfect fit on certain model years, but most found the part matched the factory shape and sealed well when installed correctly.
Best for: Convenience-driven owners who want a ready-to-install, factory-style replacement hose to quickly restore oil cooler function with minimal parts sourcing and straightforward installation.
Less Ideal for: Service shops seeking heavy-duty or performance-upgraded oil cooler lines should consider premium braided lines or OEM dealer parts instead of this basic replacement hose.
- Designed to replace part number 21306-AQ805 for direct fit on specified 3.5L Nissan/Infiniti models
- Comes with clamps for a ready-to-install assembly
- Constructed from rubber and plastic materials suited for oil-cooling service
- Multiple users report accurate fit and reliable sealing when installed properly
- Included clamps may damage the hose if over-tightened and some installers prefer to replace them with stronger clamps
Verdict: A convenient, factory-style replacement oil cooler hose that simplifies DIY repair for Infiniti G35/M35/FX35 owners.
7. ULZOZN Hose Oil Cooler for Infiniti FX35/G35/M35 (replaces 21306-AQ805)
| Compatible models | Infiniti FX35 2003-2008, G35 2004-2006, M35 2006-2008 |
|---|---|
| Material Type | Rubber |
| Includes | 1 hose and 2 clamps |
| Replaces | 21306-AQ805 |
This ULZOZN hose oil cooler is a simple, factory-replacement style part that routes hot oil to and from the engine oil cooler on compatible Infiniti models. It is made from rubber and supplied with two clamps so you can swap it in without special tools; installation is straightforward for a mechanically comfortable DIYer and typically used when a brittle or leaking original hose needs replacement. The listing emphasizes heat resistance, sealing under pressure, and corrosion resistance, which matter for maintaining oil temperature and preventing leaks that can affect transmission or engine cooling performance. Because it is a single-piece hose intended to match the factory routing, it restores the system without modifying flow characteristics. Limitations are that this is an aftermarket rubber hose rather than an upgraded braided or aluminum line, so it offers a direct-fit, like-for-like durability and no significant performance gain for heavy-duty or track use where higher-temperature or reinforced lines would be preferable.
Best for: Performance-oriented Infiniti owners who prioritize restoring reliable oil cooling with a direct-fit replacement that maintains factory routing and sealing without fabrication.
Less Ideal for: Drivers who need a heavy-duty or upgraded cooler line solution for racing, towing, or sustained high-temperature use should consider reinforced or braided aftermarket lines instead.
- Direct fit for specified Infiniti FX35, G35, and M35 models replacing part 21306-AQ805
- Supplied with clamps for quick, no-special-tools installation
- Rubber construction claims heat resistance and anti-aging properties for reliable sealing
- Simple swap restores factory routing and prevents oil leaks that can affect cooling
- Rubber single-piece hose is not a reinforced or braided upgrade for higher-temperature or high-pressure performance
Verdict: A direct-fit rubber replacement hose that restores proper oil cooler sealing and routing for specified Infiniti models.
Choosing the Right Infiniti G35 Oil Cooler Lines: Key Factors to Consider
Material and Construction
The base materials and how the lines are built determine resistance to heat, oil exposure, and abrasion. Lines made from high-temperature synthetic rubber with braided reinforcement or PTFE-lined assemblies typically resist swelling and softening when exposed to hot engine oil.
Reinforcement layers and protective sleeving reduce the risk of chafing against brackets and adjacent components. Consider whether the hose outer cover resists oil and road contaminants, since surface degradation accelerates failure and leaks.
Fitting and Connector Compatibility
Correct fittings ensure a leak-free connection at the oil cooler, block feed, and return points. Matching connector threads, flare types, and O-ring sizes prevents mismatches that can cause seepage or require adapters.
Verify that the kit's fittings align with factory locations and that any supplied clamps or adapters meet OEM specifications. Properly seated fittings that do not require forceful bending reduce stress on the lines and improve long-term reliability.
Length and Routing Accuracy
Hose lengths must match the vehicle's routing to avoid kinks or excessive tension. Lines that are too short can pull at fittings and promote leaks, while excess length can rub against moving parts and wear prematurely.
Look for assemblies that mirror factory routing or include clear diagrams for correct pathing. Good routing minimizes contact with hot exhaust components and moving linkages, preserving line integrity.
Pressure Rating and Reinforcement
Oil system pressures vary under different operating conditions, so hoses must be rated to safely contain expected pressures plus a margin for spikes. Reinforced cores and internal braided layers maintain shape under pressure and prevent ballooning.
A conservative pressure rating reduces the risk of failure during high-load driving. Reinforced construction also helps the hose resist collapse and maintain consistent oil flow through the cooler.
Resistance to Oil and Heat Degradation
Continuous exposure to hot engine oil is a primary stressor for cooler lines. Materials that resist chemical attack from oil and withstand elevated underhood temperatures will last longer.
Consider hoses tested for compatibility with engine oils and additives. Heat-resistant materials and thermal sleeves at exposure points further reduce the chance of breakdown from radiant heat.
Installation Ease and Serviceability
Designs that simplify installation reduce the risk of mistakes that can cause leaks. Pre-formed lines, included clamps, and clear instructions make replacements faster and more reliable for DIYers and technicians alike.
Service-friendly routing and accessible fittings mean future inspections and repairs are less invasive. Also consider whether the kit allows replacing individual sections or requires a full assembly swap when a single segment fails.
How We Chose the Best Infiniti G35 Oil Cooler Lines
To assemble this list of Infiniti G35 oil cooler lines we applied careful, category-specific filters focused on real-world serviceability and long-term reliability. Key evaluation criteria included material construction and abrasion resistance to withstand engine bay heat and road debris; connector and fitting compatibility to match factory feed and return points without modification; hose length and routing accuracy to ensure proper clearance around engine components; pressure rating and reinforcement to handle typical oil system pressures; and installation simplicity, including available hardware and clear attachment points.We prioritized options that minimize common failure modes such as chafing and connector leaks, and that offer clear instructions for a correct install. Exclusions included products lacking documented fitment for the Infiniti G35 chassis, hoses with unclear material specifications, or kits that required major fabrication. The final selections therefore reflect components that balance durability, correct fitment, and straightforward replacement for this vehicle.
Our full evaluation process is outlined in our review methodology.
FAQ
How do I tell if my Infiniti G35 oil cooler lines are failing?
Common signs include visible oil seepage around fittings, wetness or oil stains on the underside of the vehicle, and a gradual drop in oil level between changes. You might also notice higher oil temperatures under load or unusual oil pressure fluctuations. Inspect lines for cracking, swelling, hard spots, or abrasive wear where they contact other components.
Can I replace only one section of the oil cooler lines or should I do both?
It often depends on the kit and condition of the remaining line. If the other section is original and shows age, replacing both feed and return lines at the same time reduces the chance of a near-term failure. If a single section is clearly damaged and the rest is in good condition and matches the new material, a targeted replacement can be acceptable.
Are adapter fittings needed when replacing Infiniti G35 oil cooler lines?
Adapters may be necessary if the replacement fittings do not exactly match the factory connection type or thread. It is preferable to use lines with connectors designed for the Infiniti G35 to avoid adapters, since adapters introduce additional leak points and can complicate routing. Always verify connector type before beginning work.
How long does a typical oil cooler line replacement take?
For an experienced technician the job commonly takes one to a few hours depending on access, whether components must be removed for clearance, and whether additional clamps or brackets are needed. For a DIYer with basic tools and clear instructions expect a longer timeframe and plan for careful routing checks to avoid kinks or chafing.
What should I use to prevent chafing where lines contact other parts?
Protective sleeves, split loom, or abrasion-resistant tape at contact points can significantly reduce wear over time. Properly securing the hose with factory-style clips and routing it away from moving parts and hot exhaust surfaces also prevents chafe. Regular inspections after installation help catch early wear before a leak develops.
Conclusion
When choosing Infiniti G35 oil cooler lines, prioritize correct fitting compatibility, durable materials, and accurate hose lengths that match factory routing. These factors have the greatest impact on leak prevention and long-term performance.Balance pressure ratings and heat resistance with ease of installation and serviceability. Replacing worn lines proactively or using kits that minimize adaptation will reduce downtime and help keep engine oil temperatures under control for reliable operation.
Explore More:
- Check out all Infiniti G35 parts & accessories
- Explore Oil Cooler Lines Maintenance & Repair Guides
- Explore Cooling System
- Browse all Auto Parts






