Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a Buick LaCrosse and want to adjust wheel fitment, properly chosen wheel spacers can change track width, clearance, and stance without altering suspension geometry. Picking the right spacer matters because the wrong fit or thickness can affect handling, hub engagement, and wheel bearing loads. This guide shortlists top options that match the LaCrosse bolt pattern and hub dimensions and evaluates them by fitment accuracy and material strength. Read on to see the key considerations and why these picks made the list before the product details.
Looking for other parts? See all Buick LaCrosse parts & accessories.
Top Picks at a Glance
| Best overall The best all-around choice for most situations | Orion Motor Tech 2" 5×4.75 Wheel Spacers with M12x1.5 Studs, Set of 4 |  |
| Best Quality Built to a higher standard if you want something more solid | Customadeonly 5×115 Hubcentric Wheel Spacers 50mm (2 pcs) Center Bore 70.3mm with 12×1.5 Studs |  |
| Best Value The sweet spot between price and what you get | Customadeonly 5×120 Hub-Centric Wheel Spacers 1.5" (2 pcs) |  |
| Best budget The cheapest option that still gets the job done reliably | StanceMagic 5mm Hubcentric Wheel Spacers, 5×120.65 Bolt Pattern, 70.5mm Bore (2 pcs) |  |
| Highest Rated A top-rated pick with lots of positive feedback | StanceMagic 1/2" 5×114.3 & 5×120.65 Universal Wheel Spacers (Set of 2) |  |
| Most popular A crowd favorite that many people choose with confidence | Customadeonly 5×120 Hub-Centric Wheel Spacers (2 pcs, 6mm) |  |
| Best Seller A high-volume bestseller chosen again and again | Customadeonly Forged 5×120 Wheel Spacers 25mm Hubcentric Black (4pcs) |  |
1. Orion Motor Tech 2" 5×4.75 Wheel Spacers with M12x1.5 Studs, Set of 4
| Bolt pattern | 5×4.75 |
|---|---|
| Stud thread | M12x1.5 |
| Thickness | 2 inches |
| Center bore | 87.1mm |
These Orion Motor Tech wheel spacers push your wheels 2 inches outboard to widen the axle track and make late-model wheels fit older Buick LaCrosse bolt patterns that use a 5×4.75 lug pattern. They are machined from T6 aircraft-grade aluminum and come with heat-treated zinc-coated M12x1.5 studs for durability. Typical use is simple: remove the wheel, fit the spacer to the hub, torque the supplied studs, then remount the wheel to gain clearance and a wider stance. The raised 60 degree taper helps centering during installation, but these are lug-centric spacers so careful, staged tightening and a final torque check after a short drive are required. Benefits include improved cornering stability, a more aggressive wheel fitment, and lightweight construction that minimizes added unsprung mass. Limitations are that they are not hub-centric so they may require careful installation and stone-proofing in harsh environments, and fitting depends strictly on Buick LaCrosse hub dimensions and brake clearance so verify compatibility before fitting.
Best for: Balanced buyers who want a practical, style-and-performance upgrade for a Buick LaCrosse and value a durable, well-machined spacer that widens track without major suspension changes.
Less Ideal for: Drivers seeking a fully hub-centric, drop-in spacer solution or those unwilling to perform careful installation and post-install torque checks should consider other options.
- Solid T6 aircraft-grade aluminum construction for a strong yet lightweight spacer
- Includes heat-treated, zinc-coated M12x1.5 studs for improved fastening strength
- Precision-machined 60 degree taper that aids centering during installation
- 2-inch width meaningfully widens track for improved stance and handling
- Lug-centric design rather than hub-centric which requires careful staged tightening and extra attention to centering
- Not universally compatible with every Buick LaCrosse year and trim so fitment must be confirmed
Verdict: A sturdy, well-machined 2" spacer that gives Buick LaCrosse owners a wider stance and improved fitment when careful lug-centric installation is acceptable.
2. Customadeonly 5×115 Hubcentric Wheel Spacers 50mm (2 pcs) Center Bore 70.3mm with 12×1.5 Studs
| Bolt pattern | 5×115 |
|---|---|
| Center bore | 70.3mm |
| Thickness | 50mm |
| Material | 6061 T‑6 aluminum |
| Stud thread | 12×1.5 |
These Customadeonly wheel spacers are a pair of 50mm (2") hubcentric adapters machined from 6061 T6 aluminum with aftermarket studs to push the wheel flange outward for brake clearance, offset correction, or a wider track. Installation is bolt-on and straightforward for a mechanically comfortable DIYer or shop, and the hubcentric design plus CNC machining aims to preserve wheel balance and centering. Practical benefits include clearance for big brake kits, improved wheel fitment and stance, and a noticeable handling feel from the wider track. The included heat-treated class 10.9 studs and machined center bore support secure mounting when torqued properly. Limitations include increased leverage on wheel bearings and suspension components as the track widens and a small number of user reports of noise or fitment issues if specs are mismatched or hardware is not torqued correctly. Verify hub bore, bolt pattern, and stud thread before ordering and recheck torque after initial miles to avoid problems.
Best for: Performance-oriented owners seeking a factory-quality spacer to clear big brake upgrades or sharpen handling by widening the track while prioritizing precision machining and secure fitment.
Less Ideal for: Buyers who do not want any added stress to wheel bearings or suspension or those unwilling to verify fitment and perform post-install torque checks should consider alternative wheel/wheel fitment solutions.
- CNC machined hubcentric design for accurate wheel centering and reduced vibration risk
- Made from 6061 T6 aluminum for a high strength-to-weight ratio
- Includes heat-treated class 10.9 studs for durable fastener performance
- Bolt-on installation that works with standard wheel hardware
- 50mm thickness gives substantial clearance for big brake kits and offset correction
- Wider track increases stress on wheel bearings and suspension over time
- Requires exact matching of hub bore and bolt pattern or fitment problems may occur
Verdict: Precisely machined hubcentric 50mm spacers that provide reliable clearance and improved stance for Buick LaCrosse builds needing performance-grade fitment.
3. Customadeonly 5×120 Hub-Centric Wheel Spacers 1.5" (2 pcs)
| Bolt pattern | 5×120 |
|---|---|
| Center bore | 66.9mm |
| Stud size | M14 x 1.5 |
| Material | 6061 T6 aluminum |
These Customadeonly wheel spacers are a simple bolt-on solution for owners who need extra clearance or a wider track on Buick LaCrosse models that use the 5×120 pattern and 66.9mm hub bore. Sold as a pair, each spacer is machined from 6061 T6 aluminum and uses heat-treated class 10.9 steel studs, so you get lightweight parts with robust stud engagement. Installation is straightforward: the spacers center on the hub and use existing wheel nuts to attach, which makes them a quick option for correcting offset or fitting different wheels without modifying hubs. Practical benefits include CNC machining for consistent balance and the hub-centric design that reduces vibration risk when installed correctly. Important limitations are the fixed 1.5-inch thickness so you must confirm fitment for your exact LaCrosse wheel and tire combination, and some users report reduced allowable wheel torque compared with factory specifications on certain vehicles, so follow torque guidance and recheck fasteners after initial miles. These spacers are best used for street and light performance driving rather than extreme track abuse.
Best for: Practical optimizers who want an inexpensive, precision-machined spacer to improve wheel fitment and stance on a Buick LaCrosse without extensive modification.
Less Ideal for: Buyers seeking spacers for heavy track use, extreme load applications, or those unwilling to monitor torque and recheck fasteners after installation.
- Hub-centric design with 66.9mm bore for accurate centering and reduced vibration risk
- CNC-machined 6061 T6 aluminum construction for consistent machining and light weight
- Includes heat-treated class 10.9 M14x1.5 studs for strong stud engagement
- Bolt-on installation that uses existing hardware for a quick fit
- Fixed 1.5-inch thickness may not suit every wheel/tire setup and requires fitment verification
- Some reports indicate thread deformation under high torque on certain vehicles, so torque limits may be lower than factory wheels
Verdict: A CNC-machined, hub-centric 1.5-inch spacer that offers a low-cost, accurate way to correct offset on Buick LaCrosse cars if you confirm fitment and follow torque care.
4. StanceMagic 5mm Hubcentric Wheel Spacers, 5×120.65 Bolt Pattern, 70.5mm Bore (2 pcs)
| Bolt Pattern | 5×120.65 |
|---|---|
| Center Bore | 70.5mm |
| Thickness | 5mm |
| Material | Aluminum |
These StanceMagic 5mm hubcentric wheel spacers are a simple aftermarket solution when you need a small offset change for a Buick LaCrosse that uses a 5×120.65 bolt pattern and 70.5mm hub bore. Made from CNC-machined aluminum and anodized for corrosion resistance, the spacers sit between the wheel and hub to move the wheel outward by 5mm. That modest thickness can prevent light rubbing against suspension or calipers, slightly widen track width, and give a more planted look without major handling changes. Installation requires basic tools and proper torqueing of lug nuts, and you may need longer bolts or studs since extended hardware is not included. Buyers should verify fitment carefully and check and re-torque lug hardware after 25–50 miles. These are a budget-friendly, lightweight option for small clearance fixes but do not change bolt pattern or provide large offsets, so they are not a substitute for adapters or custom wheels.
Best for: Practical, budget-conscious Buick LaCrosse owners who want a low-cost way to fix minor rubbing or improve stance without major modifications.
Less Ideal for: Drivers seeking large offsets, bolt pattern conversion, or a permanent performance upgrade should consider thicker spacers, adapters, or different wheels instead.
- CNC-machined aluminum construction for consistent fit and lightweight installation
- Hubcentric 70.5mm bore helps center the wheel to minimize wobble
- Anodized finish offers basic corrosion resistance
- Thin 5mm thickness solves minor clearance issues without big offset changes
- Extended lug bolts or studs are not included so additional parts may be required for safe installation
- 5mm thickness only addresses small clearance problems and will not significantly alter wheel fitment or stance
Verdict: A low-cost, lightweight hubcentric spacer that fixes small clearance issues on compatible Buick LaCrosse models but requires longer hardware for some installs.
5. StanceMagic 1/2" 5×114.3 & 5×120.65 Universal Wheel Spacers (Set of 2)
| Thickness | 1/2 inch |
|---|---|
| Bolt Pattern | 5×114.3 and 5×120.65 |
| Hub Center Bore | 82mm |
| Material Type | Aluminum |
These StanceMagic wheel spacers are CNC-machined aluminum spacers sold as a pair to push wheels outward by 1/2 inch. They mount between the hub and wheel to resolve clearance issues with calipers, shocks, or to create a wider stance. The spacers accept both 5×114.3 and 5×120.65 bolt patterns and have an 82mm hub bore, so they work as a universal, non-hubcentric option when the LaCrosse hub lip is no larger than the listed diameter. They are anodized to resist corrosion and arrive with machined faces for a neat fit. Installation requires standard tire tools, checking lug nut thread engagement, and likely re-torquing after 25–50 miles; extended studs are not included and may be needed depending on stud length. Because these are not hubcentric and do not include hardware, careful fit verification and professional installation are recommended to maintain wheel alignment and vibration-free operation on a reliability-focused Buick LaCrosse build.
Best for: Reliability-focused buyers who prioritize a durable, precision-made spacer to solve minor clearance issues on a Buick LaCrosse and prefer a conservative, proven modification approach.
Less Ideal for: Users seeking a plug-and-play hubcentric spacer with included hardware or those wanting large offset changes; installers unwilling to verify fitment or follow proper torque and re-torque procedures should consider alternatives.
- CNC-machined aluminum construction for consistent fit and corrosion resistance after anodizing.
- Dual-compatible bolt patterns (5×114.3 and 5×120.65) increase chances of correct fitment for Buick LaCrosse wheels.
- Thin 1/2-inch thickness corrects minor clearance problems without large offset changes.
- Machined finish presents a clean, factory-quality appearance once installed.
- Not hubcentric and lacks a centering lip, so hubcentric rings or careful fit checks may be required to prevent vibration.
- Does not include extended wheel studs or additional hardware needed in some installations.
- Hub center bore and outer diameter may not match every wheel or rotor hat—measurements are required before purchase.
Verdict: Well-made 1/2-inch aluminum spacers that fix small clearance problems on a Buick LaCrosse but require fit verification and possibly extra hardware due to being non-hubcentric.
6. Customadeonly 5×120 Hub-Centric Wheel Spacers (2 pcs, 6mm)
| Bolt pattern | 5×120 |
|---|---|
| Center bore | 66.9mm |
| Thickness | 6mm per side |
| Thread pitch | 14mm x 1.5 |
These Customadeonly wheel spacers shift wheels outward by 6mm per side to correct offset, improve wheel fitment, and give a slightly wider track. They bolt directly to the hub and use a hub-centric design so wheels sit centered against the spacer for easier installation and reduced vibration risk. Manufactured with CNC machining from 6061 T6 aluminum, the spacers are lightweight yet durable and meant for bolt-on use with 14mm x 1.5 threads. In real-world use they are useful for clearing brake or suspension components, achieving a flush wheel look, or fine-tuning handling behavior on Buick LaCrosse models that use the 5×120/66.9mm specification. Important limitations: the 6mm thickness is a modest change so it will not solve major clearance or staggered setup needs, and some users report sensitivity to over-torque on certain vehicles so using a torque wrench and checking thread engagement is essential. Longer studs may be required depending on wheel and stud length.
Best for: Convenience-driven buyers who want an easy, bolt-on correction to make wheels sit flush or clear small interference without extensive modification or wheel changes.
Less Ideal for: Drivers planning major wheel width increases, aggressive track setups, or those who need more than minor offset correction should consider thicker spacers or a wheel/wheel-stud upgrade instead.
- Hub-centric fit centers the wheel for reduced vibration and easier installation
- CNC-machined from 6061 T6 aluminum for consistent dimension and good strength-to-weight ratio
- Bolt-on design matches 5×120 bolt pattern and 66.9mm center bore for direct fitment
- Thin 6mm thickness provides modest offset correction without large changes to scrub radius
- Only 6mm per side so it will not address large clearance or wide-wheel conversions
- Uses factory-style thread pitch and may require longer studs for some wheel/stud combinations
- Some users report thread deformation if over-torqued, so careful torque control is required
Verdict: A CNC-machined, hub-centric 6mm spacer that offers a simple, low-impact way to correct wheel fitment on Buick LaCrosse models but is limited to modest offset needs.
7. Customadeonly Forged 5×120 Wheel Spacers 25mm Hubcentric Black (4pcs)
| Bolt Pattern | 5×120 |
|---|---|
| Center Bore | 66.9mm |
| Thread Pitch | M14x1.5 |
| Thickness | 25mm |
| Quantity | 4 pieces |
These are forged 25mm hubcentric wheel spacers made for 5×120 hubs with a 66.9mm center bore and 14×1.5 thread pitch, supplied in a set of four. They bolt directly to the hub and then accept the wheel, raising wheel offset by about 1 inch per side to improve stance and create extra clearance for bigger brakes or different wheel offsets. Construction uses forged 6061 T6 aluminum and heat-treated class 10.9 steel studs, and the product is CNC machined for concentricity, which helps reduce vibration risk when installed correctly. Typical use is for correcting offset on aftermarket wheels or pushing factory wheels flush with the fender; installation requires proper torqueing and in some cases trimming studs or using extended studs. Practical benefits include improved track width and fitment flexibility for Buick LaCrosse owners needing a reliable, factory-replacement-style spacer. Important limitations are that some vehicles may require stud trimming or different lug hardware and that correct torque and periodic checks are necessary to avoid thread or stud issues on certain applications.
Best for: Risk-averse mainstream Buick LaCrosse owners who want a factory-quality, reliable wheel spacer to correct wheel offset or create modest extra clearance while minimizing vibration and fitment problems.
Less Ideal for: Buyers unwilling to inspect or modify studs, or those who need a spacer solution that requires no changes to factory hardware should consider alternatives or professional installation.
- Forged 6061 T6 aluminum construction for strength and consistent concentricity
- Hubcentric 66.9mm bore reduces runout and helps maintain wheel balance
- Includes class 10.9 heat treated steel studs for improved durability
- CNC machining reduces balance issues common with lower-quality spacers
- May require trimming factory studs or different lug hardware on some vehicles
- Reported sensitivity to over-torquing and potential thread deformation on certain cars
Verdict: A forged, CNC-machined 25mm hubcentric spacer set that provides a reliable way to correct offset and gain clearance for Buick LaCrosse owners seeking a factory-quality upgrade.
Choosing the Right Buick LaCrosse Wheel Spacers: Key Factors to Consider
Bolt Pattern and Hub Match
Correct bolt pattern and hub centric alignment are essential for safe installation. If the spacer does not match the LaCrosse bolt pattern precisely, you risk improper seating and uneven load distribution. A hub-centric design that matches the wheel hub diameter helps center the wheel and reduces the chance of runout and vibration.
Verify the spacer lists both the bolt circle diameter and hub bore size. Mismatched dimensions can transfer stress to studs and bearings, so always ensure the spacer is specified for the vehicle's hub and the wheel's center bore.
Material and Construction
Spacer material determines strength and corrosion resistance. High-quality aluminum alloys or billet designs offer good strength-to-weight ratios, while low-grade materials may deform under load. Look for machining tolerances and whether the spacer is one-piece or multi-piece; one-piece billet designs tend to be stiffer and less prone to failure in everyday driving.
Also consider surface treatments such as anodizing or coating which help prevent galvanic corrosion between the spacer, hub, and wheel. Reliable construction reduces the risk of cracking and ensures consistent fit over time.
Thickness and Offset Effects
Spacer thickness changes wheel offset and track width, which affects handling and steering feel. Small thicknesses can correct minor clearance issues, while larger spacers create a wider track but increase leverage on wheel bearings and studs. Choosing the right thickness is a balance between the desired look or clearance and the mechanical limits of the vehicle.
Consult a thickness guide that relates spacer depth to expected clearance and bearing loads. Incremental changes are safer than large jumps, and you should verify wheel-tire clearance at full suspension travel after installation.
Thread Engagement and Torque Specifications
Proper thread engagement and following torque specs are critical for safety. Spacers that reduce the number of threads engaged on the stud or use undersized hardware can compromise clamping force. Ensure the spacer and any supplied studs allow the original lug nuts to engage the thread length recommended by the vehicle manufacturer.
Follow published torque specs for lug nuts and any spacer hardware, and re-check torque after initial road miles. Using the correct torque sequence and values reduces the chance of loosening and uneven clamping that can lead to vibration or component wear.
Hubcentric Vs Lugcentric Design
Hubcentric spacers center the wheel on the hub using a precision bore and can reduce runout and vibration. Lugcentric spacers rely on the lug nuts to center the wheel and may be more tolerant of slight hub or wheel bore variations, but they can amplify imbalance if the lug seating is not uniform.
For a Buick LaCrosse, hubcentric spacers that match the hub bore are usually preferable for consistent centering. If you choose lugcentric products, be prepared to balance wheels and verify fitment carefully to minimize the risk of vibration.
Installation Hardware and Ease
Availability of proper installation hardware and straightforward instructions affect long-term reliability. Some spacers include extended studs and replacement nuts or an installation kit that ensures correct fit without ad-hoc modifications. Having the right hardware reduces the temptation to reuse mismatched components that could fail.
Consider whether the spacer requires additional tools or modifications and whether manufacturer torque guidance and fitment documentation are provided. Clear instructions make it more likely you will achieve correct clamp loads and safe installation.
How We Chose the Best Buick LaCrosse Wheel Spacers
We focused on factors that directly affect safety, fit, and long-term durability for Buick LaCrosse wheel spacers. Our editorial filters prioritized exact bolt pattern compatibility including common 5×114.3 patterns, correct hub-centric fit to reduce runout, and sufficient material strength and corrosion resistance for road use. We also evaluated spacer thickness options, thread engagement and torque specifications, and whether an installation kit or proper hardware was available. Ease of installation and the clarity of manufacturer torque guidance were weighted to reflect real-world maintenance. We excluded any spacers lacking clear fitment tables, unspecified material ratings, or those designed only for off-road or racing use without highway suitability. The result is a list focused on safe, road-appropriate spacers that match the Buick LaCrosse's mechanical requirements.
Our full evaluation process is outlined in our review methodology.
FAQ
Will wheel spacers fit my Buick LaCrosse?
They can if you choose spacers specified for the LaCrosse bolt pattern and hub bore. Confirm the bolt circle, lug count, and hub-centric diameter before purchase. Properly matched spacers will sit flush and maintain correct centering to avoid runout.
Do wheel spacers cause vibration on a Buick LaCrosse?
Vibration often depends on fitment and balancing rather than spacers alone. Hub-centric spacers that match the hub bore reduce the chance of vibration, while poorly matched spacers or uneven torque can introduce runout. Balancing and correct torque checks usually resolve most issues.
How thick of a wheel spacer can I use safely?
Safe spacer thickness depends on wheel offset, clearance needs, and allowable bearing load. Small increments are typically safer than large jumps because thicker spacers increase leverage on bearings and studs. Consult a thickness guide and verify clearance and suspension travel after installation.
Should I use hubcentric or lugcentric spacers?
Hubcentric spacers are generally recommended when you can match the hub bore because they help center the wheel and reduce runout. Lugcentric spacers can work if centering is handled by the lug seats, but they may require more careful balancing and torque checks to avoid vibration.
Do I need an installation kit or special hardware?
An installation kit with extended studs and correct nuts simplifies proper installation. If a spacer does not include hardware, ensure replacement studs provide full thread engagement and match OEM torque specifications. Using correct hardware reduces the risk of loosening and uneven clamping.
Conclusion
Choosing the right Buick LaCrosse wheel spacers comes down to matching bolt pattern and hub bore, selecting appropriate thickness, and ensuring robust material and hardware. Prioritize hub-centric fitment, correct thread engagement, and clear torque guidance to minimize vibration and loading concerns.Accept the tradeoffs between stance and mechanical stress: modest spacers can remedy clearance or aesthetic needs with minimal downside, while large offsets increase bearing and stud leverage and require more careful evaluation.
Explore More:
- Check out all Buick LaCrosse parts & accessories
- Explore Wheel Spacers Maintenance & Repair Guides
- Explore Wheels & Tires
- Browse all Auto Parts
