Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Replacing a worn or failing Nissan Versa wheel hub assembly matters for safe handling and steady wheel alignment. If the hub or bearing is noisy, loose, or showing play, you can experience vibration, uneven tire wear, or compromised steering feel. This guide covers seven shortlisted options that meet common fitment and durability needs for the Nissan Versa.We evaluated each pick for long-term durability and installation fit, plus noise prevention and bearing performance, to help you narrow choices quickly.
Looking for other parts? See all Nissan Versa parts & accessories.
Top Picks at a Glance
1. Detroit Axle Front Wheel Bearing Hub Assembly (pair) for Nissan Versa/Cube/Tiida
| Position | Front Left and Right |
|---|---|
| Lugs | 4 Bolt |
| ABS on Hub | Encoder |
| Drive Type | FWD |
| Bearing Type | Ball Bearing |
This Detroit Axle kit supplies two front wheel bearing and hub assemblies engineered to replace the factory units on compatible Nissan Versa, Cube, and Tiida models. Intended for front-left and front-right installation on FWD cars, each hub includes a built-in ABS encoder and the correct 4-bolt lug pattern and 3-bolt triangular flange to match factory mounting. Buyers install these when a worn bearing, noisy hub, or intermittent ABS faults require replacement; the assemblies come preassembled to speed swap-out and reduce shop time. Practical benefits include direct-fit hardware locations, grease-compatible ball bearings, and a claimed 10-year spare part availability that suggests long-term support. Some reviews report consistently good fit and quiet operation after break-in, while a minority cite early failures or sensor fit issues, so professional installation and inspection of ABS sensor fitment is recommended. This is a budget-friendly aftermarket alternative to a new factory unit that aims to match function and restore drivability, but results can vary between individual parts and vehicles.
Best for: A balanced all-round buyer who wants a ready-to-install, affordable factory-replacement hub assembly to restore ride quality and ABS function on a Nissan Versa-class vehicle without overpaying for dealer parts.
Less Ideal for: Drivers who require guaranteed OEM-level longevity for high-mileage or heavy-duty use should consider remanufactured OEM hubs or dealer parts with direct factory warranty coverage.
- Sold as a pair for front left and right replacement to simplify repairs
- Includes integrated ABS encoder so ABS and traction functions can be restored without separate sensors
- Preassembled hub and bearing reduces installation time compared with packing bearings separately
- Designed to match factory mounting pattern (4-lug, 3-bolt flange) for direct fit on specified models
- Some customers reported early failures on individual units, indicating occasional quality variability
- A few reviews noted ABS sensor fitment or missing parts issues requiring modification or vendor follow-up
Verdict: A cost-effective, direct-fit hub assembly pair that restores wheel bearing and ABS function on compatible Nissan Versa-family models but watch for occasional quality inconsistencies.
2. Detroit Axle Front Steering Knuckle Wheel Bearing Hub Assembly Kit for Nissan Versa (Front, Pair)
| Fitment | 2013-2019 Nissan Versa; 2014-2019 Nissan Versa Note |
|---|---|
| Kit contents | Pair of front steering knuckle wheel bearing hub assemblies |
| Manufacturer | Detroit Axle |
| Manufacturer part number | KA935009_KA935010 |
This Detroit Axle kit supplies both front steering knuckles with preinstalled wheel hub bearings intended to replace worn or damaged front hubs on Nissan Versa models. The assemblies arrive fully assembled so installation avoids pressing bearings and reduces labor time; they bolt in place and are typically used when a noisy or loose front hub needs replacement. Notable features include electrocoated knuckles for improved corrosion resistance and bearing steel rated for road use, plus design aimed to match factory fit and handling characteristics. Practical benefits are easier installation for DIYers or shops, restored steering stability, and fewer alignment surprises when fitted correctly. Some buyers report excellent fit and long service, while others have experienced premature bearing failure and difficulties with warranty claims, so quality can vary between units and dealer support may be inconsistent. Expect to get near-factory performance if the parts match your vehicle and are installed with correct alignment and torque procedures.
Best for: Performance-oriented buyers who prioritize restoring factory steering feel and handling on a Nissan Versa and want a high-quality, ready-to-install front hub solution that reduces shop time.
Less Ideal for: Buyers seeking an exact OEM-sourced part with manufacturer-backed support or those unwilling to accept some variability in aftermarket part lifespan should consider alternatives.
- Comes as fully assembled knuckle and hub units so no bearing press is required
- Electrocoated knuckle and bearing steel for improved corrosion resistance
- Designed to match factory fit, form, and function for Nissan Versa front end
- Includes both driver and passenger side hubs for a complete front replacement
- Some buyers report premature bearing failures and inconsistent quality between units
- Warranty and replacement experience has been reported as difficult by some customers
Verdict: A ready-to-install, factory-fit front hub and knuckle kit that can restore Versa steering performance quickly but with some variability in long-term bearing durability.
3. FKG Front Wheel Hub Bearing Assembly 513308 for 2007–2011 Nissan Versa
| Bearing Type | Ball Bearing |
|---|---|
| Part Number | 513308 |
| Unit Count | 1.0 Count |
| Material Type | Alloy Steel, High Carbon Steel |
| Specification Met | Iso/Ts 16949 |
This FKG front wheel hub assembly replaces the front hub and bearing in one factory-style unit for 2007–2011 Nissan Versa. It arrives as a ready-to-install assembly so you avoid pressing bearings in or out during a repair, and the unit is ISO/TS 16949 certified and made from alloy and high carbon steel for durability. Typical use is a direct replacement during front hub service or when a noisy or loose bearing needs fixing; it supports 4-lug fitment and can be installed on either left or right front positions. Practical benefits include simpler installation compared with separate bearing-and-hub jobs and compatibility with factory mounting points when the correct part is selected. Limitations to note are that fitment must be confirmed against vehicle specifics before purchase and some installations on modern vehicles may require a press or specific tools if the spindle or reluctor ring differs. The part ships without extra hardware or grease beyond the factory-packed unit, so expect to reuse or replace mounting fasteners as needed.
Best for: Practical optimizers looking for a budget-conscious, factory-quality replacement that minimizes shop time and simplifies front-hub repairs on a Nissan Versa.
Less Ideal for: Drivers who need dealer-specific parts, stamped OEM batches, or who prefer a hub kit that includes new fasteners and seals should consider alternatives.
- Sold as a complete hub and bearing assembly for simpler, faster replacement
- ISO/TS 16949 production standard indicating factory-quality manufacturing controls
- Constructed from alloy steel and high carbon steel for strength and wear resistance
- Fits front left or right positions for the specified Nissan Versa model years
- Compatibility depends on exact vehicle configuration so part verification is required before install
- No additional mounting hardware or grease included, so you may need to supply or reuse fasteners
Verdict: A ready-to-install, factory-quality front hub assembly that offers a practical, cost-effective replacement for 2007–2011 Nissan Versa owners.
4. SCITOO Front Wheel Hub Bearing Assembly for 2007–2011 Nissan Versa (front, w/ ABS)
| Compatible years/vehicle | 2007-2011 Nissan Versa |
|---|---|
| Position | Front |
| Lug count | 4 Lugs |
| Includes ABS tone ring | W/ABS |
| OEM reference | Replaces 513308 |
This SCITOO front wheel hub assembly is a direct replacement intended for 2007–2011 Nissan Versa vehicles with ABS and a 4-lug front axle. It installs in place of the factory hub and is typically used when a worn or noisy bearing causes vibration, noise, or an ABS tone ring issue. The part is precision-machined and shipped as a complete hub bearing assembly, which simplifies installation compared with rebuilding the bearing separately. Buyers will appreciate that it addresses common symptoms quickly and that SCITOO recommends replacing hubs in pairs for balanced performance. Expect a budget-friendly alternative to factory replacements that can restore smoothness and eliminate growling or vibration. Limitations to note are typical of aftermarket hubs: long-term durability can vary from OEM, and correct torque and installation technique are important to avoid premature failure. This unit is best for cost-conscious owners comfortable with aftermarket parts and proper installation practices.
Best for: Budget-conscious Nissan Versa owners who prioritize restoring quiet, vibration-free driving on a tight budget and are comfortable using aftermarket replacement parts.
Less Ideal for: Owners looking for a long-term, dealer-level factory replacement or those who prefer OEM-sourced parts and extended durability assurances.
- Direct-fit replacement for 2007–2011 Nissan Versa front hub with ABS and 4 lugs.
- Ships as a complete hub-bearing assembly, eliminating the need to press in a separate bearing.
- Precision-machined surfaces aimed at reducing noise and vibration after installation.
- Clear guidance to replace hubs in pairs to maintain balanced vehicle handling.
- Aftermarket construction may not match long-term durability of the factory unit.
- Installation requires correct torque and procedures to avoid premature bearing failure.
Verdict: A cost-effective, ready-to-install front hub assembly for 2007–2011 Nissan Versa that restores smoothness quickly but may not match OEM longevity.
5. Detroit Axle Front Wheel Hub and Bearing Assembly Kit (Pair) for 2007–2011 Nissan Versa
| Bearing Number | 513308 |
|---|---|
| Bearing Type | Ball Bearing |
| Unit Count | 2.0 Count |
| Material Type | Alloy Steel |
| Specification Met | ISO 9001 |
This Detroit Axle kit supplies both left and right front wheel hub assemblies with integrated ball bearings and ABS encoder compatibility where specified, intended as a direct replacement for 2007–2011 Nissan Versa non-ABS models. Installation is typical for hub swaps: remove the old hub, press or unbolt the assembly, and fit the new unit; buyers note the assemblies arrive preassembled which simplifies the job and reduces press work. The product emphasizes hardened bearing steel, high-frequency quenching, and factory-style fit to restore quiet, smooth rotation and eliminate play or noise from worn hubs. Practical benefits include receiving a matched pair for both sides, compatibility with the Versa front suspension layout, and ISO 9001 production controls. Limitations are the requirement to confirm ABS and parking brake variants before ordering and the usual caveats of aftermarket hubs where long-term parity with premium OEM parts can vary by driving conditions. For a reliability-focused replacement that balances value and fit, these hubs are a solid option for routine repairs.
Best for: Reliability-focused owners who want a cost-effective, factory-style replacement to restore front-end quietness and eliminate bearing play on 2007–2011 Nissan Versa non-ABS models.
Less Ideal for: Buyers seeking maximum OEM longevity under heavy towing or performance use or owners with different ABS/parking brake configurations should consider alternate factory-quality options.
- Sold as a matched pair for driver and passenger front hubs, useful when replacing both sides
- Preassembled hub with integrated bearing reduces press-fit work during installation
- Manufactured to ISO 9001 processes with high-frequency quenching for improved wear resistance
- Designed for factory-style fit and function to restore smooth wheel rotation and eliminate noise
- Intended for non-ABS or specific ABS encoder configurations so fitment must be verified
- Aftermarket longevity may not exactly match premium OEM hubs under heavy use
Verdict: A value-oriented, factory-fit front hub pair that restores smoothness and removes bearing noise for 2007–2011 Nissan Versa non-ABS cars.
6. Detroit Axle Front Wheel Hub Bearing Assembly Kit (2-pack) for 2007–2012 Nissan Versa
| Fitment | 2007-2011 Nissan Versa; 2012 Nissan Versa 1.8L (4-Wheel ABS) |
|---|---|
| Lugs | 4 |
| Position | Front left and right |
| Includes | 2x front hub assemblies |
This Detroit Axle kit includes both left and right front wheel hub bearing assemblies intended to replace worn factory units on 2007–2012 Nissan Versa vehicles with four-wheel ABS. Each assembly arrives pre-assembled so installation typically involves removing the rotor and old hub, sliding the new unit into the knuckle, and torquing the mounting bolts. The product emphasizes high-frequency quenching and premium bearing steel for improved wear and corrosion resistance, and the listings note factory-quality dimensions and fit. Practical benefits include simplified installation compared with rebuilding a hub, restored steering feel and reduced bearing noise, and replacement of both sides at once to ensure matched wear. Important limitations are that the hub does not include an ABS encoder ring on some listings and buyers must confirm the fit for the 2012 1.8L variant; long-term durability depends on driving conditions and user installation quality.
Best for: Convenience-driven owners who want a fast, do-it-yourself front hub swap that restores steering smoothness and quiet operation without bearing-press equipment.
Less Ideal for: Drivers seeking a lifetime factory warranty or those who require verified OEM ABS encoder compatibility should consider factory replacement parts or dealer-sourced assemblies instead.
- Sold as a matched left and right pair for consistent replacement and balanced performance
- Pre-assembled hub assemblies speed up installation versus pressing bearings separately
- Manufacturer states high-frequency quenching and bearing-grade steel for better wear and corrosion resistance
- Designed to meet factory-style fit and function for the specified Nissan Versa models
- Some listings and reviews report issues with ABS encoder ring or sensor compatibility on certain vehicles
- Long-term lifespan varies with use and a few users reported premature failure in high-mileage or heavy-use cases
Verdict: A convenient, pre-assembled matched pair that makes replacing front hub bearings on Nissan Versa models faster and simpler than rebuilding bearings.
7. Detroit Axle Front Wheel Hub & Bearing Assembly for Nissan Versa/Tiida (Non-ABS), 4-Lug
| Position | Front Left or Right |
|---|---|
| Lugs | 4 Bolt |
| Flange Type | 3-Bolt Triangular |
| ABS Type | Encoder |
| Manufacturer | Detroit Axle |
This Detroit Axle front wheel hub & bearing assembly replaces the front left or right hub on non-ABS Nissan Versa and Tiida models and is designed as a direct bolt-on replacement. It arrives as a single 4-lug unit with a 3-bolt triangular flange and an encoder-style ABS connector where applicable, so installation typically involves removing the old hub and pressing the new unit into place or bolting it on depending on brake rotor removal. The hub is marketed as having undergone impact and fatigue testing and many user reports note straightforward fitment, quiet operation after installation, and inclusion of the sensor for models that use it. Practical benefits include restoring wheel stability and eliminating noise or wobble caused by a failing hub and bearing. Limitations to plan for are that you may need workshop tools to separate rotors or press components on some vehicles and occasional reports highlight packaging or shipping damage requiring inspection on arrival.
Best for: Risk-averse mainstream buyers who prioritize a proven, widely purchased replacement part that restores factory behavior and reduces the chance of fitment surprises.
Less Ideal for: Drivers who need an ABS-equipped hub for other configurations or who prefer premium performance-grade bearings; also not suitable for vehicles outside the specified non-ABS Versa/Tiida fitment.
- Direct-fit replacement for front left or right positions on specified Nissan Versa and Tiida non-ABS models.
- Includes encoder-style sensor connector when required so ABS-related lights are less likely to be triggered.
- 4-bolt lug pattern and factory-matching flange design simplify bolt-on installation for compatible vehicles.
- Manufacturer states the part undergoes impact and fatigue testing to support durability claims.
- May require a press or extra labor to separate rotor and hub on some vehicles during installation.
- Some customers reported insufficient protective packaging leading to potential damage in transit.
Verdict: A straightforward, factory-style front hub assembly that restores wheel stability on non-ABS Nissan Versa and Tiida models.
Choosing the Right Nissan Versa Wheel Hub Assembly: Key Factors to Consider
Fitment and Vehicle Specificity
Correct fitment is essential because the wheel hub assembly must match Nissan Versa mounting points, bolt pattern, and bearing dimensions. An exact fit reduces installation time and the risk of alignment issues after replacement.
When the assembly is designed specifically for the vehicle, you avoid modifications and ensure the ABS tone ring, if present, lines up correctly. Confirming fitment up front prevents problems like uneven brake rotor contact or incorrect wheel offset that can affect handling and tire life.
Bearing Sealing and Longevity
High-quality seals keep out water, dirt, and road salt, which are the main causes of premature bearing failure. A well-sealed bearing maintains lubricant and reduces contamination, extending service life under varied driving conditions.
Vehicles driven in wet or coastal areas benefit most from robust sealing. Choosing assemblies with proven sealing designs reduces the likelihood of noise, play, and the need for repeat replacements.
Material Quality and Corrosion Resistance
The hub material and coatings determine resistance to rust and mechanical wear. Hubs exposed to moisture and de-icing chemicals perform better when made from durable metals and treated with anti-corrosion finishes.
Better material quality also supports consistent torque retention at mounting fasteners and prevents degradation that can lead to wobble or failure. For long-term reliability, prioritize assemblies with clear specifications about materials and protective coatings.
Noise and Vibration Characteristics
Bearing smoothness and proper preload affect the amount of noise and vibration transmitted to the cabin. Assemblies designed and machined to tight tolerances typically run quieter and reduce wheel hub noise grinding or humming.
Noise symptoms often appear before catastrophic failure, so selecting hubs with low vibration profiles helps maintain comfort and may indicate better overall manufacturing control. Look for references to quiet operation and vibration minimization in product information.
Integration and Ease of Installation
Some assemblies come fully integrated with the bearing, hub, and mounting hardware, simplifying installation and lowering labor time. Integration reduces the number of steps and special tools required to complete a replacement on a Nissan Versa.
Consider whether the unit includes necessary components like ABS tone rings or wheel studs. A more complete assembly decreases the chance of missing parts during installation and improves repeatability for DIYers or technicians.
Torque Specifications and Serviceability
Knowing and following the correct wheel hub assembly torque specs is critical to prevent overloading the bearing or leaving fasteners loose. Proper torque preserves bearing preload and ensures safe fastening of the hub to the vehicle.
Choose assemblies that are compatible with standard service procedures for the Nissan Versa and that do not require uncommon tools or one-time-use components. Good serviceability reduces maintenance time and error during future inspections or replacements.
How We Chose the Best Nissan Versa Wheel Hub Assembly
We selected products that meet the needs of Nissan Versa owners by focusing on concrete, vehicle-specific performance factors. Key evaluation criteria included bearing life and sealed design for longevity; factory-equivalent fitment and mounting accuracy to ensure straightforward installation on the Nissan Versa; corrosion resistance and durable hub materials to withstand road conditions; preload and tolerance control to minimize wheel play and vibration; and noise and smooth-rolling characteristics to reduce grinding and humming during operation. We also considered ease of installation, such as whether the assembly integrates the bearing and hub to reduce labor steps.Items excluded from consideration were universal or multi-vehicle hubs without clear Nissan Versa-specific fitment, assemblies lacking sealed bearings, and products with insufficient manufacturing or quality documentation. The result is a focused list of assemblies that prioritize fit, longevity, and quiet operation for the Nissan Versa rather than broad compatibility or lowest cost.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common signs that my Nissan Versa wheel hub assembly needs replacement?
Common signs include a grinding or humming noise from the wheel area, looseness or play when the wheel is rocked, uneven tire wear, and vibration during driving. You may also notice ABS warning lights if the tone ring or sensor is affected. Inspection by a qualified technician can confirm whether the hub assembly or another component is the cause.
Can I replace a Nissan Versa wheel hub assembly myself?
Many mechanically inclined owners can replace a hub assembly with basic tools and a service manual. The process usually involves removing the wheel, brake components, and axle or driveshaft fasteners as applicable. Take care to follow torque specifications and safety procedures, and be prepared to use a jack and stands or lift. If you are unsure about any step, professional assistance is advisable.
How long should a typical wheel hub assembly last on a Nissan Versa?
Service life varies with driving conditions, but a properly sealed and installed hub can last many years under normal driving. Exposure to water, road salt, and heavy loads can shorten lifespan. Regular inspections for noise, play, and seal condition help catch issues early before bearing failure occurs.
Will a bad wheel hub assembly affect my Nissan Versa's steering or braking?
Yes, a failing hub can affect steering precision and may cause vibration that alters brake feel. In extreme cases, wheel play can change alignment and increase stopping distance. Addressing symptoms promptly helps maintain predictable steering and braking performance.
Should I replace front and rear wheel hub assemblies at the same time?
It depends on condition and mileage. If only one hub shows wear or symptoms, replacing just that unit can be appropriate. However, if multiple hubs exhibit similar age-related wear, replacing both sides of an axle at once can ensure balanced performance and reduce the chance of repeat labor.
What maintenance reduces the risk of premature wheel hub failure?
Avoid driving through deep water when possible, and rinse undercarriage salt and grime after winter exposure. Regularly inspect for loose wheel bearings, torn seals, or unusual noises. Keeping brake components in good condition also prevents contaminants from reaching the hub area.
Conclusion
Prioritize assemblies that match Nissan Versa fitment exactly, offer robust sealing, and use durable materials to ensure quiet, long-lasting operation. Consider ease of installation and whether the unit includes integrated components to minimize labor and fitment risk.Balance noise and vibration performance against durability when selecting a hub. Following proper torque specifications and routine inspection will help maintain safe steering and prevent premature bearing failure.
Explore More:
- Check out all Nissan Versa parts & accessories
- Explore Wheel Hub Assemblies Maintenance & Repair Guides
- Explore Wheels & Tires
- Browse all Auto Parts
