Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Nissan Altima shows vibration, uneven tire wear, or unusual noise from a wheel, choosing the right wheel hub assembly matters for safety and ride quality. This guide covers seven shortlisted Nissan Altima wheel hub assemblies selected for reliability and fit accuracy. You will get practical guidance on the features that matter, such as bearing durability and installation fit, plus the evaluation criteria we used. Scroll on for the top picks and the key factors to weigh before you buy.
Looking for other parts? See all Nissan Altima parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Autoround Front Wheel Bearing and Hub Assembly 2-Pack (513294) for Nissan Altima |  |
| Most Popular A crowd favorite that many people choose with confidence | Detroit Axle Front Wheel Hub Bearing Assembly Kit (pair) for 2007–2012 Nissan Altima 2.5L with ABS, 5-Lug |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Wheel Bearing Hub Assembly Kit for Nissan Altima 2.5L (Front & Rear, 4-Wheel ABS) |  |
| Best Budget The cheapest option that still gets the job done reliably | PAROD Front Wheel Hub & Bearing Assembly 513296 |  |
| Most Sold A high-volume bestseller chosen again and again | KUSATEC Front Wheel Hub and Bearing Assembly (2-Pack) |  |
| Best Value for Money The sweet spot between price and what you get | MOOG 513296 Front Wheel Hub and Bearing Assembly for Nissan Altima |  |
| Best Overall The best all-around choice for most situations | KNOLET Pair 512388 Rear Wheel Bearing Hub Assembly with ABS |  |
1. Autoround Front Wheel Bearing and Hub Assembly 2-Pack (513294) for Nissan Altima
| Compatibility | 2007–2012 Nissan Altima 2.5L Front ABS |
|---|---|
| Lug Count | 5 Lugs |
| Flange Offset | 1.6IN |
| Flange Diameter | 5.35IN |
| Bolt Circle Diameter | 4.5IN |
This Autoround 513294 two-pack replaces the front wheel hub and bearing on 2007–2012 Nissan Altima 2.5L models with ABS and is intended as a direct factory-quality replacement. Each assembly integrates the bearing within the hub so installation is a single component swap at the front wheel, which speeds up repairs and reduces labor compared with pressing separate bearings. The listing highlights bolt circle, flange diameter, and offset so mounting aligns to factory locations, and multiple user reports note quiet operation and restored smoothness at highway speeds. For reliability-focused buyers, the product’s claim of meeting or exceeding factory performance and the included 2-pack make it practical for doing both sides at once. Limitations to consider are third-party branding and variable long-term durability compared with OEM units, and you should verify ABS sensor fitment and bolt pattern before ordering to avoid core compatibility issues.
Best for: Reliability-focused buyers who prioritize restoring factory-like performance and quiet operation on a Nissan Altima and prefer parts that simplify a dependable DIY or shop repair.
Less Ideal for: Drivers seeking a branded OEM replacement with a known long-term warranty or those who need guaranteed dealer-level fitment verification should consider dealer-sourced parts instead.
- Sold as a 2-pack allowing replacement of both front hubs in one job
- Designed for direct bolt-on replacement for 2007–2012 Altima 2.5L ABS models
- Reportedly restores quiet, vibration-free highway driving according to multiple user experiences
- Preassembled hub and bearing simplifies installation and reduces workshop time
- Aftermarket part so long-term durability may vary versus factory-brand hubs
- Fitment requires confirming ABS tone ring and bolt pattern match before purchase
Verdict A budget-friendly, ready-to-install 2-pack hub assembly that restores quiet, factory-style front-wheel performance on 2007–2012 Nissan Altima 2.5L ABS models.
2. Detroit Axle Front Wheel Hub Bearing Assembly Kit (pair) for 2007–2012 Nissan Altima 2.5L with ABS, 5-Lug
| Fits Models | 2007–2012 Nissan Altima 2.5L |
|---|---|
| Lug Pattern | 5 Bolts |
| ABS Type | Encoder |
| Bearing Type | Ball Bearing |
| Includes | 2x Front Wheel Hub Bearing Assemblies |
This kit supplies both front wheel hub and bearing assemblies intended as direct replacements for the 2007–2012 Nissan Altima 2.5L with ABS and 5-lug hubs. Typically used when you have wheel bearing noise, looseness, or ABS tone ring issues, the package includes left and right hubs preassembled with encoder-type ABS rings and ball bearings so installation is mostly a bolt-in job for anyone comfortable with basic front-end service. Detroit Axle states the parts undergo standard durability testing and many owners report quiet, smooth operation after replacement. The assemblies come as a matched pair which reduces fitment guesswork and saves time compared with pressing bearings separately. Limitations are that this listing fits only the 2.5L Altima with the specified spline count and lug pattern, and like all aftermarket hub assemblies you should verify ABS sensor alignment and torque procedures during installation to avoid ABS faults. Occasional reports of packaging or missing items suggest inspecting the kit on receipt before installation.
Best for: Drivers who value convenience and a quick, low-hassle repair for a Nissan Altima 2.5L front hub problem and prefer a ready-to-install, matched pair over sourcing parts separately.
Less Ideal for: Owners who need hubs for Altima engines or axle configurations other than the 2.5L 5-lug ABS setup or those who prefer to rebuild existing hub components rather than replace the whole assembly.
- Sold as a left/right pair so both sides are replaced together for consistent performance
- Preinstalled bearing and ABS encoder reduce the need for bearing presses or extra machining
- Fits the specified Nissan Altima front application to simplify selection and installation
- Many buyers report quiet, smooth operation and fit comparable to factory replacements
- Compatible only with Altima 2.5L variants that match the listed spline count and 5-lug configuration
- Some customers reported receiving incomplete shipments or packaging issues on rare occasions
Verdict A convenient, ready-to-install paired hub assembly kit that simplifies front-end repairs on the 2007–2012 Nissan Altima 2.5L with ABS, provided you confirm the exact fitment before ordering.
3. Detroit Axle Wheel Bearing Hub Assembly Kit for Nissan Altima 2.5L (Front & Rear, 4-Wheel ABS)
| Bearing Number | 512388 |
|---|---|
| Bearing Type | Wheel Bearing |
| Compatible Lubricant | Grease |
| Specification Met | Oe |
This Detroit Axle kit supplies two front and two rear wheel bearing hub assemblies engineered for 2.5L Nissan Altima models with 4-wheel ABS. Installers use it as a direct factory-replacement package when worn hubs cause noise, looseness, or degraded steering feel. The listing includes both front and rear hubs with encoder-style ABS provisions and 5-lug fitment so it bolts into the stock knuckles without modification. Buyers will appreciate the ready-to-install assemblies that restore wheel alignment and wheel speed sensor function and eliminate the need to press bearings in or out. The practical benefits are straightforward: renewed handling, reduced vibration, and a clean way to return brake/ABS performance to factory behavior. Limitations are that this kit is specific to the Altima 2.5L with 4-wheel ABS and will not cover other engines or ABS setups, and expectations for long-term durability should follow typical aftermarket-to-factory replacement comparisons rather than claiming superior lifetime to fully new OEM units.
Best for: Performance-oriented owners who prioritize restoring precise steering and wheel control to factory levels and want a full front-and-rear hub solution for a Nissan Altima 2.5L with 4-wheel ABS.
Less Ideal for: Buyers seeking parts for Altima engines or ABS setups other than the 2.5L 4-wheel ABS configuration or those who prefer factory-branded hub assemblies from a dealer.
- Complete kit includes both front and rear hub assemblies for a one-stop replacement
- Factory-style ABS encoder provision preserves wheel speed sensor function
- Direct bolt-in 5-lug fitment removes need for bearing press work
- Restores steering feel and reduces vibration from worn hubs
- Fitment limited to Nissan Altima 2.5L models with 4-wheel ABS and not interchangeable with other configurations
- Aftermarket construction may differ in long-term durability compared with some factory replacements
Verdict A full front-and-rear, direct-fit hub assembly kit that brings handling and ABS function back to factory-standard on the Altima 2.5L with 4-wheel ABS.
4. PAROD Front Wheel Hub & Bearing Assembly 513296
| Bearing Number | 513296 |
|---|---|
| Bearing Type | Ball Bearing |
| Compatible Lubricant | Grease |
| Manufacturer | PAROD |
This PAROD 513296 front wheel hub and bearing assembly replaces the front wheel hub on compatible Nissan Altima applications and is presented as an economical alternative to factory parts. It arrives preassembled with the bearing installed so installation is similar to swapping a factory hub and can be completed by a competent DIYer or mechanic without specialty tooling. The listing emphasizes vehicle-tested fit and says the assembly meets OEM-quality standards, which translates to straightforward fitment and the ability to restore steering stability and wheel rotation without additional machining. Practical benefits include lower cost compared with dealer parts and a pre-greased ball bearing for immediate use. Limitations to expect are variable longevity compared with higher-end brands and occasional fitment confusion between model years or subvariants, so confirm the 513296 part number against your Altima's requirements before buying. Some reviewers report short service life in a few cases, while others find it a perfect, budget-friendly replacement.
Best for: Budget-conscious owners seeking an affordable, factory-replacement style front hub for routine repair of a Nissan Altima who prioritize immediate fit and lower upfront cost.
Less Ideal for: Drivers who prioritize maximum long-term durability or those restoring a vehicle to highest-spec original condition should consider premium branded units or dealer replacements instead.
- Preassembled hub and bearing for faster installation
- Advertised to meet factory-quality standards for proper fit
- Pre-greased ball bearing ready for immediate use
- Lower cost alternative to dealer replacement parts
- Some reviewers report inconsistent durability compared with premium replacements
- Possible fitment confusion across Altima model years if part number is not verified
Verdict A cost-effective, preassembled front hub for Nissan Altima owners who need a quick, lower-cost replacement but should verify part fitment and accept mixed longevity reports.
5. KUSATEC Front Wheel Hub and Bearing Assembly (2-Pack)
| Fits vehicle | Nissan Altima (specified years) |
|---|---|
| Position | Front |
| Flange bolt pattern | 4 holes |
| Flange bolt thread | M12X1.5 |
| Wheel lugs | 5 lug |
These KUSATEC front wheel hub and bearing assemblies are sold as a two-pack intended for front installation on compatible Nissan Altima vehicles. They combine the hub and bearing into a single replaceable unit, which simplifies installation compared with rebuilding a pressed-in bearing. The listing notes a 4-bolt flange pattern, M12x1.5 flange bolt thread size, and a 5-lug bolt wheel interface, so the parts mount like factory replacements on applicable Altima front hubs. Buyers report quiet operation and functioning ABS sensor signals after installation. Benefits include improved sealing to minimize road noise and corrosion-resistant hub bolts that help when torquing the wheel nuts. Important limitations are that long-term durability is uncertain from the listing alone and some customers reported rare failures, so expect variable lifespan compared with higher-cost name brands. This is a practical option for do-it-yourselfers or shops replacing failed front hubs on supported Altima years who want a ready-to-install assembly rather than separate bearing service.
Best for: Risk-averse mainstream buyers who prioritize restoring safe, quiet front-end operation on a Nissan Altima without custom machining and want a straightforward, ready-to-install replacement.
Less Ideal for: Drivers seeking long-term, high-mileage assurance from an established premium brand or those who prefer to reuse original hub components should consider alternatives.
- Sold as a two-pack so both front hubs can be replaced together
- Built-in hub and bearing assembly speeds installation compared with pressing bearings
- Protective coating on hub bolts reduces corrosion and eases wheel nut tightening
- Improved seal design noted to reduce noise and vibration
- No explicit warranty details provided on the sales page
- Some reviewers reported isolated early failures, indicating inconsistent longevity
Verdict A cost-effective, ready-to-install front hub and bearing two-pack for Nissan Altima owners who want a quick, OEM-style replacement, but expect variable long-term durability.
6. MOOG 513296 Front Wheel Hub and Bearing Assembly for Nissan Altima
| Brand | MOOG |
|---|---|
| Bearing Number | 513296 |
| Bearing Type | Roller Bearing |
| Compatible Lubricant | Grease |
This MOOG 513296 hub assembly replaces the front wheel hub and bearing on compatible Nissan Altima models and is designed for direct-fit installation. It combines a precision roll-formed bearing and application-specific raceway to reduce noise and heat, with machined exterior surfaces and coated wheel studs to resist rust and help torqueing and removal. Typical use is a bearing/hub replacement when you have noise, play, or ABS sensor issues; installation is intended to be straightforward for a DIY mechanic with the right tools, and MOOG highlights engineered fit and testing. Practical benefits include improved ride smoothness, consistent bearing preload to limit premature wear, and fewer fitment surprises when the correct spline count and sensor slot are selected. Important limitations are that fit depends on matching spline count and sensor location exactly, and some users report occasional alignment or corrosion concerns, so double-check application notes before installing and prepare for light cleanup of the knuckle during replacement.
Best for: Practical optimizers who want a reliable, tested replacement hub that balances durability and cost and are comfortable doing or supervising a straightforward DIY or shop installation for their Altima.
Less Ideal for: Buyers who need a hub for a vehicle outside the specific Altima fitments or who want a no-questions plug-and-play swap without checking spline and sensor compatibility.
- Designed for direct-fit replacement on specified Nissan Altima model years
- Precision roll-form bearing and application-specific raceway to reduce noise and wear
- Coated wheel studs for improved rust resistance and easier removal
- Machined exterior and factory-style preload for consistent fit and performance
- Requires matching spline count and sensor slot orientation for correct fit
- Some users report early surface corrosion in certain conditions
Verdict A well-tested, value-oriented hub assembly for Altima owners who want a balance of factory-style fit and long-term performance as long as you confirm spline and sensor compatibility.
7. KNOLET Pair 512388 Rear Wheel Bearing Hub Assembly with ABS
| Brand | KNOLET |
|---|---|
| Bearing Number | CHB203006U2P |
| Bearing Type | Ball Bearing |
| Compatible Lubricant | Grease |
| Position | Front Left and Right Axle |
These KNOLET 512388 hub assemblies replace worn rear hubs and are built to restore quiet, vibration-free rolling and ABS sensor function. They install as direct replacements on confirmed-fit vehicles and include the ABS sensor preinstalled, which simplifies swapping the old units for new ones and reduces troubleshooting after installation. Constructed from forged carbon steel with protective coating and seals, the hubs are aimed at lasting through road moisture and resisting early corrosion. Typical use is a front-rear replacement when bearings rumble, wheel vibration increases, or ABS/traction warnings appear; installers report the flange and bolt pattern match factory parts so alignment and fit are straightforward. On the downside these are aftermarket parts, so long-term durability can vary by driving conditions and removal of rusted originals may require heat and force during installation. They are a practical, cost-effective alternative to dealer units but expect a professional installation or proper tools for a clean job.
Best for: Practical, balanced buyers who want a reliable, ready-to-install hub assembly that restores ride quality and ABS function without paying dealer prices.
Less Ideal for: Drivers who prioritize factory direct parts or who need a heavy-duty, high-mileage warranty service plan should consider dealer or premium branded alternatives.
- Direct-fit replacement for specified Nissan and Infiniti models with matching flange and bolt patterns
- Integrated ABS sensor included to restore traction/ABS functionality without extra wiring
- Forged carbon steel construction and protective coating for improved corrosion resistance
- Pre-sealed bearing design reduces noise and helps keep grease in place for quieter operation
- As an aftermarket hub, long-term lifespan may differ from factory hubs depending on driving conditions
- Installation can be difficult on corroded vehicles and may require specialty tools or heat to remove the old hub
Verdict A cost-effective, direct-fit hub assembly that restores quiet operation and ABS function for compatible Nissan/Infiniti models while offering good corrosion protection for typical drivers.
Choosing the Right Nissan Altima Wheel Hub Assembly: Key Factors to Consider
Fitment and Compatibility
Correct fitment is essential because the hub assembly secures the wheel and aligns with the brake and suspension components. An assembly that matches the Nissan Altimas wheel mounting pattern, spline count, and hub flange dimensions prevents issues like hub runout and premature tire wear.
Compatibility also ensures the ABS tone ring and wheel speed sensor interfaces align properly when present. Choosing an assembly with documented vehicle-specific fitment reduces the chance of extra modifications during installation and helps preserve steering and braking behavior.
Bearing Durability and Construction
Bearing quality determines how long the assembly will run quietly and carry load without excess play. Look for units that specify bearing type, heat-treated races, and sealed bearing designs to keep contaminants out.
Longer-lasting bearings reduce the frequency of future repairs and help maintain consistent wheel alignment and steering feel over time. Durability also matters under varied driving conditions, from city commuting to highway driving.
Sealing and Corrosion Resistance
Road salts, water, and debris attack hub assemblies and can cause premature bearing failure. Effective seals and corrosion-resistant coatings extend service life by preventing moisture ingress and rust on mating surfaces.
Consider assemblies with robust seals and plated or treated flanges, especially if you drive in wet or winter climates. Better sealing also helps retain lubricant and reduces the chance of noise or roughness developing early.
ABS Integration and Sensor Compatibility
Many Nissan Altima models rely on wheel speed information for ABS and traction control. If your vehicle uses an ABS tone ring or integrated sensor, the hub assembly must replicate that function accurately.
Incorrect ABS integration can trigger warning lights or affect braking performance. Confirm whether the replacement includes an ABS ring or requires reusing the original component, and ensure physical alignment to the sensor pickup.
Included Hardware and Installation Ease
Some assemblies come pre-pressed with bearings and include the necessary nuts or studs, which simplifies installation and reduces labor time. Others may require pressing bearings or transferring studs from the old hub, adding complexity and potential for installation error.
Choosing an assembly that matches your intended installation approach can save time and minimize the chance of improper fit. Also verify whether torque specifications and installation notes are provided to achieve correct clamping and preload.
Noise, Vibration, and Performance Indicators
A well-made hub assembly minimizes wheel noise and vibration, contributing to a smoother driving experience. Pay attention to design features that reduce chatter, such as tight manufacturing tolerances and secure flange interfaces.
Recognizing early signs of bearing wear, like growling or grinding during rotation, helps you choose an assembly with proven quiet performance. Prioritizing quality in this area supports comfort and reduces secondary wear to steering and suspension parts.
FAQ
How do I know if my Nissan Altima needs a new wheel hub assembly?
Common signs include persistent humming or grinding noise from a wheel, increased vibration through the steering wheel, uneven tire wear, and ABS warning lights in some cases. Symptoms often appear gradually and may be more noticeable while turning or at higher speeds. Having a mechanic check wheel play and listen for bearing noise can confirm whether the hub assembly is the issue.
Can I replace just the bearing or should I replace the whole hub assembly?
Replacing the whole hub assembly is often recommended because it avoids the need to press bearings and reduces the risk of contamination during installation. Complete assemblies commonly arrive pre-assembled and can save time and lower the chance of installation errors. The best choice depends on the condition of surrounding components and the tools you have available.
Does the ABS system require special consideration when replacing a hub assembly?
Yes. If the Altima model uses an ABS tone ring or an integrated sensor, the replacement must provide the same interface and alignment. Mismatched or misaligned ABS components can trigger warning lights or impair system performance. Verify whether the assembly includes an ABS ring or plan to transfer the original ring exactly to preserve sensor spacing.
What should I know about installing a wheel hub assembly myself?
Installation typically requires lifting the vehicle, removing the wheel and brake components, and supporting the suspension while accessing the hub fasteners. Some assemblies come with pre-pressed bearings, which simplifies the job, but others may require bearing pressing tools. Accurate torqueing of fasteners and checking for proper wheel bearing preload or endplay are important to avoid premature failure.
How long do wheel hub assemblies usually last on a Nissan Altima?
Lifespan varies with driving conditions, but assemblies often last many tens of thousands of miles under normal use. Exposure to water, road salt, heavy loads, or rough roads can shorten service life. Regular inspections and addressing early symptoms like noise or looseness can help prevent sudden failures.
How We Chose the Best Nissan Altima Wheel Hub Assembly
We focused on what actually affects long-term performance and safe operation on the Nissan Altima. Primary evaluation criteria included bearing lifespan under normal driving, OEM or OE-equivalent fitment accuracy to ensure correct alignment and wheel engagement, sealing and corrosion protection to resist road salt and moisture, and the presence of integrated ABS tone rings where applicable. We also considered ease of installation, including whether assemblies are pre-pressed and include necessary hardware, and the supplier quality controls that reduce early-failure risk. We excluded units that lacked clear fitment data for the Nissan Altima, assemblies without specified bearing specifications, and parts intended for heavy-duty or non-passenger applications. The result is a shortlist of assemblies that meet real-world durability, fitment, and safety expectations for this vehicle class.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Nissan Altima wheel hub assembly, prioritize correct fitment, bearing durability, and proper ABS integration where applicable. Those factors directly affect safety, brake behavior, and long-term reliability. Balance ease of installation and sealing against corrosion with the expected driving conditions. Selecting an assembly that matches the vehicles specifications and includes clear installation guidance will minimize rework and help maintain smooth, safe handling.
Explore More:
- Check out all Nissan Altima parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
