Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
A properly functioning wheel hub assembly is critical to safe handling, smooth driving, and even tire wear on your Mercedes-Benz GLE. If a hub or its integrated bearing begins to fail, you may notice vibration, noise, or uneven tire wear that affects control and comfort.This guide presents the top shortlisted wheel hub assemblies for the Mercedes-Benz GLE. We focus on parts that deliver reliable fitment, durable bearings, and predictable service life. Below you'll find the evaluation criteria we used and a selection of top options that met those standards.
Looking for other parts? See all Mercedes-Benz GLE parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | TRQ Front Wheel Bearing & Hub Assembly (BHA31350) |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Pair Front Wheel Bearing Hub Assembly for Mercedes‑Benz GLE/GL/ML Series (5‑lug, ABS) |  |
| Best Budget The cheapest option that still gets the job done reliably | DRIVESTAR 513363 Front Wheel Hub & Bearing Assembly (Pair) for Mercedes-Benz GLE/GL/GLS/ML Models |  |
| Most Sold A high-volume bestseller chosen again and again | Brake X Front Right Wheel Bearing and Hub Assembly for Mercedes-Benz GLE350 (2016–2018) |  |
| Best Value for Money The sweet spot between price and what you get | A-Premium Rear Wheel Bearing Hub Assembly for Mercedes-Benz |  |
| Best Overall The best all-around choice for most situations | TRQ Front Wheel Bearing & Hub Assembly Set (2-piece) |  |
1. TRQ Front Wheel Bearing & Hub Assembly (BHA31350)
| Brand Name | TRQ |
|---|---|
| Bearing Type | Ball Bearing |
| Included Components | Wheel Bearing & Hub Assembly |
| Material Type | Alloy Steel |
| Bearing Number | BHA31350 |
This TRQ wheel bearing and hub assembly is a direct-fit replacement intended to restore front-end wheel support, wheel speed sensing, and smooth rotation on compatible Mercedes-Benz models. It is supplied as a single complete hub-and-bearing unit so installation replaces the damaged hub and bearing in one step, which is useful during front-end repairs where noise, vibration, or ABS warnings indicate bearing failure. Notable features include a ball-bearing design, factory-aligned flange and bolt pattern, and the manufacturer’s installation resources such as step-by-step videos. Real-world benefits are quicker installation compared with pressed-in bearings, restored driving refinement, and elimination of wheel-noise and ABS error conditions when the part fits correctly. Limitations to consider are that flange bolts, wheel studs, and the ABS sensor are not included, so additional hardware or reuse of factory components may be necessary during installation. Some users report variable longevity, so professional torqueing and correct fitment are important to achieve reliable service life.
Best for: A reliability-focused buyer who prioritizes restoring factory-level driveability and stopping wheel noise or ABS faults quickly with a straightforward replacement part.
Less Ideal for: Buyers looking for a complete kit with new studs, bolts, and ABS hardware included or those who prefer an assembly with an extended proven field track record under heavy-duty use.
- Direct-fit design replaces hub and bearing in one unit for faster repair.
- Ball-bearing construction aimed at reducing noise and vibration.
- Includes manufacturer support materials and installation videos to aid DIY or shop installs.
- Factory-matching flange and bolt pattern for proper alignment and ABS pickup location.
- Does not include flange bolts, wheel studs, or ABS sensor, requiring reuse or separate purchase.
- Mixed reports on long-term durability in a small number of installations.
Verdict A practical, direct-fit hub assembly for Mercedes-Benz front repairs that speeds replacement but may require sourcing mounting hardware separately.
2. Detroit Axle Pair Front Wheel Bearing Hub Assembly for Mercedes‑Benz GLE/GL/ML Series (5‑lug, ABS)
| Position | Front Left & Right |
|---|---|
| Lugs | 5 |
| ABS on Hub | Yes |
| Bearing Type | Ball Bearing |
This kit supplies two front wheel bearing hub assemblies intended as direct factory-quality replacements for Mercedes‑Benz GLE/GL/ML models that use a 5‑lug ABS hub. Installation replaces worn or noisy hubs and restores secure wheel mounting and proper ABS sensor function. The assemblies are ball-bearing style, arrive as a pair, and include studs and the hub units so you can swap both sides in one service session. Detroit Axle says the parts undergo impact, wear, and fatigue testing and the listing notes ISO 16949 specification alignment, which supports consistent manufacturing. Practical benefits include reduced road noise and restored wheel alignment behavior after failure, and many owners report plug-and-play fitment and improved drivability after installation. Limitations to consider are that fitment must be verified against your specific GLE variant and year, and some buyers reported occasional packaging or sensor damage in transit requiring vendor support. Professional installation is recommended if you do not have the tools to access ABS tone rings and press or torque hub hardware properly.
Best for: Performance-oriented owners who prioritize restoring factory handling and braking feedback on Mercedes‑Benz GLE/GL/ML models and want a high-quality aftermarket hub that behaves like a factory replacement.
Less Ideal for: Buyers seeking a universal or multi-vehicle solution or those unwilling to verify exact model-year fitment should look elsewhere; also avoid if you plan to install without proper tools or mechanical experience.
- Sold as a matching front left and right pair so both sides can be serviced together.
- Designed for 5‑lug Mercedes‑Benz hubs with integrated ABS tone ring to maintain braking and traction control function.
- Manufactured to automotive quality standards and vibration/wear testing for durability.
- Includes wheel studs and hub assemblies to simplify the replacement process.
- Fitment depends on exact Mercedes‑Benz model and year so you must confirm compatibility before purchase.
- A few customers reported damaged sensors or packaging on arrival requiring replacement communication.
Verdict A high-quality, tested pair of front hub assemblies built to restore factory handling and ABS function on compatible Mercedes‑Benz GLE/GL/ML models, provided you confirm exact fitment.
3. DRIVESTAR 513363 Front Wheel Hub & Bearing Assembly (Pair) for Mercedes-Benz GLE/GL/GLS/ML Models
| Bearing Number | 513363 |
|---|---|
| Bearing Type | Roller Bearing |
| Material Type | Alloy Steel |
| Compatible Lubricant | Grease |
This DRIVESTAR hub and bearing assembly is a paired front replacement intended for Mercedes-Benz GL, GLE, GLS, and ML vehicles from the specified model years. It combines a roller bearing cartridge with a preassembled hub and coated wheel studs so you can swap in both left and right units during a service. The listing emphasizes factory-spec fit and uses Kyodo Yushi AF-I grease made in Japan, which should help bearing life and performance in a range of temperatures. Installation is presented as straightforward for a shop or experienced DIYer because the studs are coated to resist corrosion and the assembly arrives ready to mount. On the downside this is an aftermarket option rather than a factory-branded part and longevity depends on installation quality and vehicle conditions. Also the listing covers many model year permutations so confirming exact year and drivetrain fitment before buying is important. For a cost-focused buyer this set delivers the core function of restoring wheel bearing support without premium branding or features like built-in sensors beyond the basic hub assembly.
Best for: Budget-conscious Mercedes-Benz owners who prioritize fixing wheel-end noise or play affordably and prefer replacing both front hubs at once to avoid repeat labor.
Less Ideal for: Owners seeking an exact factory-branded replacement or those who want extended OEM-backed coverage should consider dealer parts or higher-end alternatives.
- Sold as a left and right pair so both sides can be replaced at once
- Pre-greased with high-quality Kyodo Yushi AF-I grease intended for wheel bearings
- Coated wheel studs resist corrosion for easier removal and proper torqueing
- Designed to match factory fitment for the listed Mercedes-Benz models to simplify installation
- Aftermarket manufacture rather than factory-brand may mean different long-term durability
- Compatibility depends on precise model year and variant so fit must be verified before purchase
Verdict A cost-focused paired front hub and bearing assembly that restores wheel-end function on compatible Mercedes-Benz models without premium OEM branding.
4. Brake X Front Right Wheel Bearing and Hub Assembly for Mercedes-Benz GLE350 (2016–2018)
| Fitment | 2016-2018 Mercedes-Benz GLE350 AWD front right |
|---|---|
| Pre-lubricated | Yes |
| Includes | Coated wheel studs and housing |
| Manufacturer warranty | 1 year manufacturer |
This Brake X front right hub assembly is a direct-fit replacement for the 2016–2018 Mercedes‑Benz GLE350 AWD front passenger side. It arrives pre-lubricated and ready to install, so it replaces a worn bearing and hub without additional machining or bearing packing. The unit is promoted as engineered to meet factory-level axial and radial load requirements and includes coated wheel studs to resist corrosion and seizure over time. In practice this means quieter operation, restored wheel alignment stability, and a straightforward swap for technicians or competent DIYers. The assembly comes from a brand-backed package with a stated one-year manufacturer coverage. Limitations are that the listing does not include detailed torque, tolerance, or bearing supplier data, and any variation in vehicle trim or ABS tone ring condition may require inspection before install. Expect a practical, no-frills replacement that focuses on fit and basic durability rather than performance upgrades.
Best for: Risk-averse mainstream buyers seeking a straightforward, factory-quality replacement that restores safe wheel mounting on a Mercedes‑Benz GLE350 without experimental upgrades.
Less Ideal for: Shoppers looking for performance or heavy-duty upgraded hub assemblies or those who need extensive technical specification data for benchmarking should consider alternative options.
- Direct-fit front right hub assembly specified for 2016–2018 GLE350 AWD so no modification is required
- Pre-lubricated bearing reduces installation prep and helps immediate serviceability
- Coated wheel studs offer improved corrosion resistance to reduce seizure risk
- Engineered to meet factory-level axial and radial load expectations for stable wheel support
- Listing lacks detailed technical tolerances and supplier bearing specifications that advanced technicians may want
- No mention of ABS tone ring condition or replacement parts which may require extra inspection or parts on some vehicles
Verdict A practical, ready-to-install factory-quality front right hub assembly for 2016–2018 GLE350 owners who want a dependable, risk-averse replacement.
5. A-Premium Rear Wheel Bearing Hub Assembly for Mercedes-Benz
| Position | Rear Left or Right Side |
|---|---|
| Speed Sensor Included | No |
| Material Type | GCr15 Steel and 65Mn Steel |
| Pre-Greased | Yes |
| Flange Type | 4-Hole Flange |
This hub assembly replaces the rear left or right wheel bearing and hub on select Mercedes-Benz vehicles and arrives pre-greased with sealing components, an integrated bearing cage, and a CV axle-compatible spline to simplify installation. It is typically used when worn bearings produce noise, vibration, or grease leakage; fitting the full hub assembly removes the need to press bearings in and can reduce labor time for DIYers and independent shops. The unit is made from GCr15 and 65Mn steels and is supplied without a speed sensor or wheel studs, so you need to transfer those if required by your car. Buyers will appreciate the ready-to-install design and the one-year unlimited-mileage parts guarantee. Limitations include the absence of an integrated speed sensor and no included reluctor ring, which may require purchasing additional parts for ABS-equipped models, and fitment must be checked carefully against the specified Mercedes-Benz applications before ordering.
Best for: A practical optimizer who wants a straightforward, cost-conscious repair that minimizes shop time and simplifies replacement on compatible Mercedes-Benz rear hubs.
Less Ideal for: Drivers who prefer a full plug-and-play solution with integrated ABS/speed sensor hardware or those who need a factory-specified OEM part for warranty-sensitive repairs should look elsewhere.
- Pre-greased, ready-to-install hub assembly reduces bench work and press-fit operations
- Built from heat-treated bearing steels for durability under road loads
- Includes sealing components and bearing cage to address common leakage and noise issues
- Fits a wide range of Mercedes-Benz rear applications listed by the manufacturer
- Does not include a speed sensor or reluctor ring, which may be required for ABS systems
- Wheel studs are not supplied so stud transfer or replacement may be necessary
Verdict A cost-effective, pre-greased rear hub assembly that saves labor for Mercedes-Benz owners but may require purchasing ABS or stud hardware separately.
6. TRQ Front Wheel Bearing & Hub Assembly Set (2-piece)
| Quantity | 2 Piece Wheel Bearing & Hub Assembly Set |
|---|---|
| Bearing Type | Ball Bearing |
| Material Type | Alloy Steel |
| Compatible Lubricant | Grease |
| Fitment | Front driver & passenger side for specified Mercedes‑Benz GLE/GLS models |
This TRQ kit supplies both front left and right preassembled wheel bearing and hub assemblies intended to replace worn factory units on compatible Mercedes‑Benz SUVs. Installation is aimed at DIYers and independent shops because the assemblies come preassembled to match factory fit, which can reduce bench time and eliminate bearing packing. TRQ highlights step-by-step installation videos and a broad compatibility chart to confirm the GLE/GLS fitment. In real use the assemblies restore quiet rotation and steering stability when original bearings start to rumble or vibrate, and multiple customers report noticeably reduced road noise after replacement. Build uses alloy steel ball bearings with grease lubrication and is offered as a two-piece set for front driver and passenger sides. Expectations should be tempered by some inconsistent reports of damaged or incomplete units on arrival, so inspect parts before install and have a backup plan if a return or replacement is needed. For a balanced buyer this kit delivers factory-style fit and straightforward installation at a value compared with dealer parts, provided you confirm vehicle compatibility prior to purchase.
Best for: Drivers seeking a balanced, cost-conscious replacement that restores factory-style fit and ride quality on Mercedes‑Benz GLE/GLS models and who value straightforward DIY or shop-friendly installation.
Less Ideal for: Buyers who want guaranteed long-term OEM-level longevity without any warranty risk or those unwilling to inspect parts on delivery should consider dealer or higher-end options instead.
- Sold as a matched pair for front left and right to simplify repairs
- Preassembled direct-fit design reduces install time and eliminates bearing packing
- Includes OEM-style ball bearing design and is greased for immediate use
- Extensive installation videos and compatibility info make DIY replacement easier
- Some customers report receiving damaged or incomplete units, so incoming inspection is necessary
- Not covered: long-term durability can vary between individual units
Verdict A practical, direct-fit paired hub assembly set that restores quiet operation and fit on specified Mercedes‑Benz GLE/GLS models, but inspect parts on arrival due to occasional quality issues.
Choosing the Right Mercedes-Benz GLE Wheel Hub Assembly: Key Factors to Consider
Vehicle-Specific Fitment
Correct fitment is the foundation of a successful hub replacement. A hub must align with the GLE’s wheel bolt pattern, mounting flange dimensions, and any integrated ABS or speed-sensor tone rings. If the assembly does not match those dimensions exactly, you can face installation difficulty, wheel alignment issues, or sensor errors.
Confirming fitment reduces the risk of vibration, premature wear, and the need for supplemental adapters or machining. Always verify part references and mounting specifications against your vehicle’s VIN or service manual before purchasing.
Bearing Type and Load Rating
The bearing inside the hub determines how well it handles radial and axial loads from cornering, braking, and vehicle weight. High-quality tapered or ball-bearing designs with appropriate load ratings will resist deformation and maintain smooth rotation under repeated stresses.
Choose assemblies specified for the GLE’s gross axle load and intended use. A hub with insufficient rating can develop play or noise more quickly, while a correctly rated unit will retain geometry and reduce uneven tire wear.
Sealing and Corrosion Resistance
Effective seals keep moisture, road salt, and contaminants away from bearing surfaces. A robust seal design paired with corrosion-resistant materials for the hub body helps prevent rust and premature bearing failure, especially in regions with harsh winters or coastal exposure.
Look for assemblies with durable seals and protective coatings. Better corrosion resistance reduces the likelihood of seized fasteners and simplifies future servicing or replacement.
ABS Tone Ring and Sensor Compatibility
Many GLEs use ABS tone rings integrated into the hub assembly to provide wheel speed data. The tone ring geometry and placement must match the vehicle’s sensor expectations to avoid ABS faults or inconsistent readings. Even subtle deviations can trigger warning lights or affect traction control function.
Verify that the hub’s tone ring is designed for the GLE model and year, or that the assembly offers a provision for transferring the original tone ring when required. Sensor compatibility preserves safety system performance.
Serviceability and Installation
Consider how the hub assembly affects repair time and future maintenance. Units that allow bearing replacement or use common fasteners simplify service and reduce labor during later repairs. Installation-friendly features include pre-pressed bearings, clearly marked torque points, and included hardware when applicable.
An assembly that is straightforward to install can reduce shop time and minimize the risk of incorrect assembly, which in turn supports long-term reliability.
Warranty and Manufacturer Support
A clear warranty and accessible manufacturer support provide added protection against early failures. Warranties that cover defects in materials and workmanship for a reasonable term indicate confidence in the component’s longevity.
Check warranty terms for coverage specifics and any required installation or maintenance conditions. Good documentation and support channels also help resolve fitment or performance questions promptly.
FAQ
What are common wheel hub symptoms on a Mercedes-Benz GLE?
Common signs include growling or grinding noises from a wheel area, vibration through the steering or floor, and uneven tire wear. Symptoms often worsen with speed changes or when turning. If you notice these signs, inspect for play in the hub and abnormal wheel movement.
Can I replace just the bearing instead of the entire hub assembly?
It depends on the hub design. Some assemblies have pressed-in bearings that can be replaced with the right tools, while many modern assemblies are sold as an integrated unit for ease of replacement. Consider serviceability when choosing a part and consult repair documentation for the GLE to confirm which approach applies.
How important is the ABS tone ring when replacing a hub?
The ABS tone ring is important for accurate wheel speed sensing. If the replacement hub does not have the correct tone ring geometry, it can trigger sensor errors or affect stability systems. Ensure the assembly matches the GLE’s sensor requirements or that the original tone ring can be transferred.
What causes wheel hub noise like grinding or humming?
Noise often results from wear or damage to the bearing surfaces, contamination from moisture or debris, or excessive play in mounting points. Humming noises that change with vehicle speed typically point to bearing wear, while grinding suggests more severe deterioration or lubrication loss.
Are front and rear wheel hub assemblies different for the GLE?
Yes, front and rear assemblies can differ in mounting configuration, bearing type, and ABS tone ring design. Confirm the correct position-specific part for your vehicle when ordering to ensure proper fitment and function.
What should I check during installation to ensure a reliable repair?
During installation verify correct torque on mounting bolts, proper seating of the hub flange, and secure connection of any ABS sensor wiring. Inspect adjacent suspension components and wheel bearings for related wear, and perform a road test to confirm noise elimination and smooth operation.
How We Chose the Best Mercedes-Benz GLE Wheel Hub Assembly
We selected wheel hub assemblies based on several Mercedes-Benz GLE–specific fit and performance factors relevant to long-term ownership. Primary filters included exact vehicle fitment and factory-equivalent mounting points to ensure bolt-on installation without modification. Bearing durability and load ratings were evaluated to reflect the demands of a midsize luxury SUV. We also considered sealing design and corrosion resistance to limit moisture intrusion and premature failure under varied weather conditions.Additional criteria included ABS tone ring accuracy where applicable, ease of installation based on access to mounting hardware, and warranty coverage tied to expected service life. We excluded any units that required substantial vehicle modification, lacked clear vehicle application information, or used non-replaceable bearing designs that compromised future serviceability. The final list prioritizes assemblies that balance precise fitment, longevity, and service-friendly design.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a wheel hub assembly for a Mercedes-Benz GLE, prioritize exact vehicle fitment, bearing load capacity, and effective sealing to protect against contaminants. These factors have the biggest influence on noise, vibration, and service life.Balance serviceability and warranty support with the technical specifications that match your GLE’s requirements. Focusing on correct fit, sensor compatibility, and durable materials will reduce return visits and help maintain safe, quiet operation.
Explore More:
- Check out all Mercedes-Benz GLE parts & accessories
- Explore Wheel Hub Assemblies Maintenance & Repair Guides
- Explore Wheels & Tires
- Browse all Auto Parts
