Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Kia Sorento feels loose at the wheel or produces grinding or humming noises, the wheel hub assembly is a likely culprit that affects safety and ride quality. Choosing the right wheel hub assembly matters because it directly influences steering stability, braking performance, and bearing life under varied driving conditions. This guide presents the top shortlisted options for Kia Sorento wheel hub assembly replacements and explains the evaluation criteria we used, including durability and bearing precision. Read on to understand the factors that matter and what to check before you install a replacement.
Looking for other parts? See all Kia Sorento parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Detroit Axle Rear Wheel Bearing and Hub Assembly Pair (5-Lug) with ABS |  |
| Most Popular A crowd favorite that many people choose with confidence | TRQ Wheel Bearing & Hub Assembly Set, 2-Piece |  |
| Best Quality Built to a higher standard if you want something more solid | Torchbeam Front Wheel Hub Bearing Assembly 513409 (Pair) |  |
| Best Budget The cheapest option that still gets the job done reliably | Nhsmgt 513266 Front or Rear Wheel Bearing Hub Assembly (Non-ABS, 5-Lug) |  |
| Most Sold A high-volume bestseller chosen again and again | PAROD Pair Front or Rear AWD Wheel Hub Bearing Assembly (513266) |  |
| Best Value for Money The sweet spot between price and what you get | PHILTOP Rear Wheel Hub Assembly for Kia Sorento (FWD, Rear) |  |
| Best Overall The best all-around choice for most situations | TRQ 4‑Piece Wheel Bearing & Hub Assembly Set for Kia Sorento (2011–2015) |  |
1. Detroit Axle Rear Wheel Bearing and Hub Assembly Pair (5-Lug) with ABS
| Position | Rear Left and Right |
|---|---|
| Lugs | 5 Bolt |
| Drive Type | FWD |
| ABS Type | Sensor Cap |
| Unit Count | 2.0 Count |
This Detroit Axle kit supplies two rear wheel bearing and hub assemblies intended as direct replacements for compatible FWD vehicles that use a 5‑lug rear hub with an ABS sensor cap. It is typically used to replace worn hubs that cause noise, vibration, or an ABS warning light; installations are common for owners doing a DIY job or for independent shops. Notable features include complete hub assemblies for left and right sides, a 5‑bolt lug pattern, and a sensor cap for ABS compatibility which removes the need to transfer the old bearing or sensor ring. In real use the assemblies provide a firm, factory‑style fit and have many user reports of eliminating bearing noise and restoring ABS operation. The kit comes with a long warranty period from the maker, which adds confidence for long-term reliability. Limitations are that correct fit depends on choosing the exact year and drivetrain variant for the Sorento and installation may require press tools and correct torque procedures; buyers replacing only a single side should note this is packaged as a pair.
Best for: Reliability-focused buyers who prioritize restoring factory-like braking and wheel performance on their Kia Sorento and want a long-term replacement rather than a short-term fix.
Less Ideal for: Shoppers who prefer to replace just one side at a time or need a plug-and-play swap without any press tools or mechanical work should consider alternatives or professional installation.
- Includes both left and right rear hub assemblies so both sides can be replaced at once
- 5‑lug hub with ABS sensor cap matches factory ABS setups and restores sensor function without extra parts transfer
- Marketed as a direct factory-style replacement for applicable FWD models, simplifying fitment checks
- Backed by a long manufacturer warranty that provides added ownership confidence
- Fitment is vehicle-specific so selecting the correct year/drivetrain is essential
- Installation can require a bearing press and special tools not included with the kit
- Sold as a pair which may be more than needed if only one side requires replacement
Verdict A reliability-minded, factory-style pair of rear hub assemblies that restore ABS function and eliminate bearing noise for compatible Kia Sorento FWD models, provided you confirm exact fitment and have the right installation tools.
2. TRQ Wheel Bearing & Hub Assembly Set, 2-Piece
| Brand Name | TRQ |
|---|---|
| Bearing Type | Ball Bearing |
| Included Components | 2 Piece Wheel Bearing & Hub Assembly Set |
| Material Type | Alloy Steel |
This TRQ kit supplies two pre-assembled wheel bearing and hub assemblies intended to replace worn rear hubs on compatible vehicles. It is typically used when rear bearing noise, looseness, or ABS-related symptoms indicate a failed hub; the assemblies come ready to bolt in place so most DIYers or independent shops can complete the job without bearing press tools. Notable features include a ball-bearing design, factory-style fitment approach, and included components for both driver and passenger rear positions. Practical benefits are straightforward installation, elimination of noisy or vibrating rear wheels, and the convenience of a two-piece set so both sides can be serviced at once. Limitations: ABS tone rings or sensors may not be included and will need to be transferred from the old units if required, and fitment must be confirmed for the specific Sorento year and drivetrain before buying. Some reviewers reported occasional packaging damage or rare defective units, so inspect parts on arrival.
Best for: Buyers who prioritize convenience and want a ready-to-install, direct-replacement rear hub kit to finish a quick DIY or shop repair without sourcing individual bearings.
Less Ideal for: Drivers who prefer purchasing full hub assemblies including new ABS sensors or shops needing specialized bearings for nonstandard applications should consider alternatives.
- Pre-assembled hub and bearing for direct-fit replacement to speed installation.
- Sold as a two-piece kit so both rear sides are covered in one purchase.
- Ball-bearing design that matches factory-style bearing geometry for smoother operation.
- Strong machining quality reported by users, reducing need for modification during install.
- Does not include ABS sensor; sensor transfer or separate purchase may be necessary.
- Occasional reports of damaged packaging or rare defective units requiring inspection on receipt.
Verdict A convenient two-piece, pre-assembled rear hub and bearing kit that speeds DIY replacements but may require transferring or buying ABS sensors separately.
3. Torchbeam Front Wheel Hub Bearing Assembly 513409 (Pair)
| Brand | Torchbeam |
|---|---|
| Bearing Number | 513409 |
| Position | Front |
| Included Components | Front wheel bearing & hub assembly x2 |
| Material Type | 55# Steel and GCr15 Steel |
The Torchbeam 513409 front wheel hub bearing assembly is a direct-fit replacement intended for Kia Sorento model years 2016 through 2020 and is sold as a pair to handle both front sides at once. It installs in place of the factory hub to restore proper wheel mounting, bearing preload, and wheel stud alignment, so it is typically used when a worn bearing causes humming, rumbling, or looseness. Notable features include a high-carbon 55# steel outer ring, GCr15 bearing steel, a triple oil seal and corrosion-resistant finishes meant to extend service life and keep contaminants out. In practice that means quieter operation and reduced risk of premature failure if installed correctly. The assemblies come with studs preinstalled which speeds up replacement and avoids pressing a separate bearing. Limitations are that these units do not include an ABS tone ring and they only fit the Sorento fitment listed, so confirm year and drivetrain before ordering. Some users report occasional early failure, so proper installation and periodic inspection remain important for long-term reliability.
Best for: Performance-oriented buyers who prioritize restoring factory-quality wheel control and quiet operation on a 2016–2020 Kia Sorento and prefer a ready-to-install hub assembly over rebuilding a bearing.
Less Ideal for: Buyers who need an ABS-integrated hub or who prefer OEM-branded parts with dealer support should consider alternative factory-quality options.
- Direct-fit design for 2016–2020 Kia Sorento front hubs simplifies installation
- Constructed with high-carbon 55# steel and GCr15 bearing steel for improved surface hardness
- Triple oil seal and corrosion-resistant finish help keep contaminants out and extend bearing life
- Supplied as a pair with studs preinstalled to reduce installation time
- Does not include an ABS tone ring so may not suit Sorento variants that require an integrated sensor ring
- Some reviewers reported premature noise or failure on a minority of units
Verdict A performance-minded direct-fit replacement that restores front hub function on 2016–2020 Kia Sorento with factory-quality materials but verify ABS requirements before buying.
4. Nhsmgt 513266 Front or Rear Wheel Bearing Hub Assembly (Non-ABS, 5-Lug)
| Position | Front or Rear |
|---|---|
| Lugs | 5 Bolts |
| Drive Type | FWD/AWD |
| ABS Type | Non-ABS |
| Reference Part Number | 513266 |
This Nhsmgt 513266 hub assembly is a direct-replacement style wheel bearing and hub for compatible Kia Sorento applications and is intended to restore a worn or noisy hub with a ready-to-install unit. It ships as a single 5-lug, non-ABS hub that can be used in front or rear positions where the factory part matches, and some listings include an integrated speed sensor. The manufacturer highlights precision roll-form bearing design and higher-grade steel to reduce noise and wear, and the part is tested for dimensional accuracy and rotational smoothness. For a budget-focused repair this provides a practical, straightforward option that avoids pressing in bearings or sourcing multiple components. Limitations are that it is non-ABS by specification, so it will not suit Sorento variants that require an ABS-specific hub, and buyers should verify year and position fitment carefully before ordering. Installation may require standard hub replacement tools and torque procedures but otherwise mirrors a factory-style swap.
Best for: Budget-conscious owners seeking an affordable, straightforward hub replacement to get a Kia Sorento back on the road without sourcing multiple parts or specialist bearing press services.
Less Ideal for: Drivers who need an exact ABS-equipped hub or who prefer OEM-branded parts and extended factory-backed warranties should consider alternative factory-quality options.
- Direct-replacement design for compatible Sorento hub locations, simplifying swap-out repairs
- Roll-form bearing and factory-aligned preload aimed at reduced noise and wear
- Made from higher-hardness steel materials and factory-style testing for consistent performance
- Includes a single ready-to-install hub assembly that avoids separate bearing press work
- Non-ABS specification makes it incompatible with vehicles that require an ABS-style hub or sensor integration in all cases
- Sold as a single unit so replacing both sides requires purchasing two assemblies
Verdict A cost-effective, factory-style hub assembly for Kia Sorento owners who need a simple, budget repair—only choose it if your vehicle does not require an ABS-specific hub.
5. PAROD Pair Front or Rear AWD Wheel Hub Bearing Assembly (513266)
| Brand Name | PAROD |
|---|---|
| Bearing Type | Ball Bearing |
| Unit Count | 2.0 Count |
| Material Type | Metal |
These PAROD hub bearing assemblies are sold as a pair and meant to replace failed wheel hub units on compatible AWD Kia Sorento vehicles. They combine a preassembled bearing and hub so installation is typical of a like-for-like hub swap: remove the knuckle, press out the old unit, and install the new assembly. The listing highlights vehicle-tested fit and factory-quality performance, so you get an aftermarket option that aims to match original fit and basic durability. Buyers report smooth, quiet operation after installation and straightforward fitment on Sorento models, though one installer noted the wheel studs were longer than OEM and required trimming to accept factory lug nuts. The hubs come greased and use metal construction suitable for standard street use, offering a cost-effective alternative to factory replacements for routine repairs. Expect the usual caveats of aftermarket hubs: possible minor differences in non-critical details and the need for careful measurement and torqueing during install to avoid wheel or ABS issues.
Best for: Risk-averse mainstream buyers who prioritize restoring factory-like drivability and quiet operation on their Kia Sorento without paying OEM prices.
Less Ideal for: Do-it-yourselfers who want a perfect bolt-in match with no adjustments or technicians who need parts with full documented installation specs should consider alternatives.
- Sold as a matched pair for front or rear replacement on compatible AWD Sorento models
- Preassembled hub and bearing reduces install time compared with rebuilding a bearing
- Manufacturer states vehicle-tested fit to match factory performance
- Comes pre-lubricated and uses metal construction for standard driving durability
- Some users reported longer wheel studs than factory which may require modification before factory lug nuts fit
- No vehicle-specific torque or installation instructions included in the listing
Verdict A budget-friendly, vehicle-tested replacement pair for AWD Kia Sorento hubs that restores quiet, factory-style rotation but may need minor stud adjustments during installation.
6. PHILTOP Rear Wheel Hub Assembly for Kia Sorento (FWD, Rear)
| Compatibility | Kia Sorento 2016-2024 (FWD, Rear) |
|---|---|
| Brand | PHILTOP |
| Manufacturer Part Number | 1120WBK4723US |
| Wheel Hub Number | 512646 / HA590646 / WE61788 / BR930945 |
This PHILTOP rear wheel hub assembly is a direct replacement for the rear hub on front-wheel-drive Kia Sorento models (2016–2024). It combines the hub and bearing into a single unit so you swap the whole assembly instead of pressing bearings in and out, which speeds repairs and reduces tooling needs. The listing emphasizes vehicle testing and factory-quality fit to match mounting points and restore smooth wheel rotation and load support. Typical use is a straightforward axle-end replacement when a bearing is noisy, has play, or the ABS sensor requires replacement. Practical benefits include easier installation for experienced DIYers or faster shop turnaround, and many owners report bolt-on fit and quiet operation. Limitations are that it is a generic aftermarket assembly rather than a factory-branded part and some users have reported occasional early failure, so careful inspection at installation and correct torqueing are important. If you lack installation experience, have a dealer preference, or need guaranteed long-term OEM coverage, factor that into your choice.
Best for: Practical optimizers who want a cost-effective, straightforward repair that minimizes shop time and tooling fuss while restoring safe wheel rotation on their Kia Sorento.
Less Ideal for: Buyers seeking an exact factory-branded part with extended dealer-backed warranty or those who prefer to have bearings professionally pressed at a dealership should consider alternatives.
- Direct-fit replacement for Kia Sorento FWD rear hub to avoid separate bearing press work.
- Combined hub-plus-bearing assembly simplifies installation and reduces labor time.
- Vehicle-tested fit claimed to match factory mounting and restore quiet wheel rotation.
- Aftermarket unit rather than factory-branded part so long-term durability may vary.
- Not supplied with installation instructions so professional installation is recommended for inexperienced users.
Verdict A budget-friendly, bolt-on rear hub assembly that simplifies Sorento rear bearing replacement for DIYers and shops, with the caveat that it is an aftermarket alternative to factory parts.
7. TRQ 4‑Piece Wheel Bearing & Hub Assembly Set for Kia Sorento (2011–2015)
| Fitment | Kia Sorento 2011–2015 AWD Front & Rear |
|---|---|
| Quantity | 4 Piece kit (2 front, 2 rear) |
| Bearing Type | Ball Bearing |
| Material Type | Alloy Steel |
This TRQ kit supplies two front and two rear preassembled wheel bearing and hub assemblies intended to replace worn units on 2011–2015 Kia Sorento all‑wheel‑drive models. Installation is aimed at DIY mechanics and independent shops: the hubs arrive preassembled to reduce swap time and the listing includes step‑by‑step videos to guide the job. In use the assemblies should silence bearing noise, restore wheel stability, and return accurate wheel speed signals for ABS systems. Materials list alloy steel construction and factory-style ball bearings, which most buyers report fit precisely and feel solid. Reported issues include occasional incorrect or short wheel studs and rare stud failures, so check each hub carefully before installation and torque to spec. Some units include an ABS sensor lead that may not match every Sorento variant, which could require modifying or replacing the connector. For balanced buyers wanting a full set for both axles, this kit offers convenience and value, but inspect components on arrival and follow manufacturer torque and installation procedures to avoid problems.
Best for: Balanced all-round buyers who want a convenient, full-axle replacement set that balances cost, ease of installation, and reliable, factory-like performance for routine Sorento repairs.
Less Ideal for: People who need OE direct parts with guaranteed matching studs and sensor connectors or professional shops requiring parts with documented heavy-duty stud upgrades should consider alternative suppliers.
- Complete four-piece kit covers both front and rear hubs for one vehicle, simplifying parts sourcing.
- Preassembled hubs reduce installation time and eliminate press-in bearing work for most DIYers and shops.
- Includes installation videos and broad fitment guidance to aid correct installation and reduce errors.
- Alloy steel construction and factory-style ball bearings aim to restore quiet operation and wheel stability.
- Some buyers reported incorrect or short wheel studs that required swapping or adjustment.
- A few reports of catastrophic stud failure suggest the need to inspect and torque hardware before driving at highway speeds.
- ABS sensor connector may not match every Sorento variant and could need modification or a connector swap.
Verdict A convenient, value-focused full replacement kit that restores Sorento wheel function and quietness for most owners but warrants inspection of studs and sensor connectors on arrival.
Choosing the Right Kia Sorento Wheel Hub Assembly: Key Factors to Consider
Fitment and Compatibility
Correct fitment is essential because wheel hub assemblies must align precisely with the vehicle’s knuckle, axle spline, lug pattern, and wheel offset. An assembly that does not match these dimensions can cause premature wear, vibration, or failure.
Confirming compatibility reduces installation time and avoids modifications. Check mounting bolt pattern, axle engagement, and any integrated sensor provisions to ensure the assembly mates cleanly with the Sorento’s components.
Bearing Type and Sealing
Bearing design and the quality of seals determine noise levels, friction, and service life. Tightly toleranced bearings with effective seals resist contaminants and retain lubricant longer, which reduces the chance of grinding or humming during operation.
Sealing performance is especially important in regions with moisture, road salt, or heavy dust. Better seals and lubrication strategies translate directly into longer intervals between replacements and steadier wheel behavior.
Load Rating and Durability
Wheel hub assemblies carry vehicle weight and absorb forces from cornering and braking, so their load rating should match the Sorento’s weight and intended use. Assemblies designed with robust materials and heat-treated components resist deformation under repeated stress.
Durability also involves corrosion resistance of flanges and bearings. Coatings and stainless or treated steels help maintain structural integrity over time, particularly where roads are salted or in coastal climates.
Integrated Wheel Speed Sensor Provisions
Many modern vehicles rely on wheel speed sensors for ABS and traction control. Assemblies that include or properly accommodate sensor rings and tone wheels simplify installation and preserve system accuracy.
Ensure the replacement provides the correct sensor mounting or sensor-compatible ring spacing. Mismatched sensor interfaces can trigger fault codes or reduce the effectiveness of stability systems.
Ease of Installation and Included Hardware
Ease of installation affects total labor time and the risk of installation errors. Assemblies that come with pre-installed studs, bearings, or mounting hardware cut out extra steps and reduce workshop time.
Also consider whether the hub requires press-fitting or specialized tools. Units designed for straightforward bolt-on installation are preferable for DIYers and independent shops, while others might need a press or hub puller.
Maintenance Intervals and Serviceability
Some assemblies are fully sealed and sealed-for-life while others allow for bearing repacking or separate bearing replacement. Sealed units reduce routine maintenance but require full replacement when they fail.
Think about long-term ownership and whether having a serviceable unit aligns with repair preferences and resource availability. Serviceability influences both downtime and the total lifecycle cost of ownership.
FAQ
How can I tell if my Kia Sorento wheel hub assembly is failing?
Common signs include persistent humming or grinding noises from the wheel area, uneven tire wear, or a loose or wobbly feeling at the steering wheel. You may also notice ABS warning lights if a sensor is affected. Symptoms often worsen with speed or when turning. If you suspect hub issues, have the wheel inspected for play and listen for bearing noise during a road test.
Can I replace a wheel hub assembly myself?
Many hub assemblies are designed for bolt-on replacement and can be changed with basic mechanical skills and common tools. However, some require a press or specific torque procedures to seat bearings correctly. If you are comfortable lifting the vehicle, removing the wheel and brake components, and following torque specs, a DIY replacement is possible. Otherwise, professional installation ensures correct alignment and safety.
Should I replace front and rear hub assemblies at the same time?
Replacement timing depends on symptoms and wear. If only one hub shows signs of failure, replacing just that assembly is acceptable. However, if multiple hubs have similar mileage and wear, swapping pairs or all four can provide more consistent performance and reduce future downtime. Consider the vehicle’s service history and whether the cost and effort of staged replacements align with your maintenance plan.
What causes wheel hub noise like grinding or humming?
Noise often comes from degraded bearings, loss of lubricant, or ingress of water and debris that damage bearing surfaces. Excessive axial or radial loads from impacts or misalignment can accelerate wear and produce humming or grinding. Addressing the root cause helps prevent recurrence, which may include replacing damaged components and correcting suspension or alignment issues.
Do wheel hub assemblies include wheel speed sensor rings?
Some assemblies include integrated sensor rings or are designed to accept the vehicle’s original tone ring. Others provide a blank flange that requires transferring the existing ring or sensor components. Verify whether the chosen assembly includes sensor provisions to avoid additional steps during installation and to maintain ABS and traction system function.
How We Chose the Best Kia Sorento Wheel Hub Assembly
To build this list we focused on fitment accuracy, bearing type and quality, load and speed ratings, corrosion resistance, and ease of installation for Kia Sorento wheel hub assembly applications. Fitment accuracy was a primary filter to ensure the assemblies align with bolt patterns, sensor locations, and hub height specific to the vehicle. We evaluated bearing construction and lubrication strategy because those aspects determine noise levels and longevity under load. Corrosion resistance and sealing were included to assess real-world durability in wet and salted-road environments. Installation factors such as whether the unit is bolt-on, includes studs, and accessibility for typical home-garage tools were also considered. We excluded units lacking clear fitment data, assemblies without sealed bearings, and any listings that did not provide torque guidance or specification details. The final selections prioritize assemblies that balance serviceability, long-term reliability, and consistent bearing performance for the Kia Sorento.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Kia Sorento wheel hub assembly, prioritize correct fitment, bearing quality, and sealing to maintain safe handling and quiet operation. Think about whether you need a sealed-for-life unit or a serviceable assembly based on maintenance preferences and local driving conditions. Balance ease of installation and included hardware with durability and sensor compatibility. Focusing on these tradeoffs will help you select an assembly that restores steering precision and minimizes future repairs.
Explore More:
- Check out all Kia Sorento parts & accessories
- Explore Wheel Hub Assemblies Maintenance & Repair Guides
- Explore Wheels & Tires
- Browse all Auto Parts
