Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
A worn or failing wheel hub assembly on an Infiniti Q50 can cause noise, vibration, and uneven tire wear, so picking the right replacement matters for safety and drivability. In this guide we spotlight seven shortlisted wheel hub assemblies chosen for reliable fitment and durable bearings to help get your Q50 back to smooth, quiet operation. The selections below were evaluated for bearing precision, durability, and fitment to the Infiniti Q50. Read on to see which assemblies match different needs and common installation considerations.
Looking for other parts? See all Infiniti Q50 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Detroit Axle Rear Wheel Hub and Bearing Assembly (Rear, 5‑Bolt, Non‑ABS) |  |
| Most Popular A crowd favorite that many people choose with confidence | TRQ Front Wheel Bearing & Hub Assembly Set, 2‑Piece for Infiniti Q50 (front, AWD) |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Front Wheel Hub and Bearing Assembly (pair) – BR930890 |  |
| Best Budget The cheapest option that still gets the job done reliably | Torchbeam Front Wheel Bearing & Hub Assembly 513334 |  |
| Most Sold A high-volume bestseller chosen again and again | TRQ Rear Wheel Bearing and Hub Assembly Set (2-piece) for Infiniti Q50 |  |
| Best Value for Money The sweet spot between price and what you get | TRQ Front Wheel Bearing & Hub Assembly (fits Infiniti Q50 AWD) |  |
| Best Overall The best all-around choice for most situations | TRQ Front Wheel Bearing & Hub Assembly Set (2-piece) |  |
1. Detroit Axle Rear Wheel Hub and Bearing Assembly (Rear, 5‑Bolt, Non‑ABS)
| Position | Rear |
|---|---|
| Lugs | 5 Bolt |
| ABS Type | Non-ABS |
| Bearing Type | Ball Bearing |
| Material | Alloy Steel |
This Detroit Axle rear wheel hub and bearing assembly replaces a failing rear hub on compatible Infiniti models and arrives as a ready-to-install single unit. It is a 5-bolt, non-ABS rear flange designed to swap directly into the vehicle where specified, so it is typically used when a noisy, loose, or failed bearing requires replacement. The part is alloy steel with a sealed ball bearing and is tested for impact and fatigue to improve durability. Buyers will appreciate the factory-style fitment, straightforward installation for a competent DIYer or technician, and the built-in bearing that removes the need to press in components. Limitations include non-ABS configuration, so it is only appropriate for Infiniti rear applications without an ABS tone ring, and mounting hardware is not included which can require sourcing the correct bolts separately. Expect a cost-effective, functional replacement that restores wheel smoothness and removes bearing noise when matched to the correct Infiniti model fitment.
Best for: Reliability-focused buyers who prioritize restoring factory ride quality and eliminating wheel bearing noise on their Infiniti Q50 with a practical, no-frills replacement.
Less Ideal for: Owners whose Q50 requires an ABS-equipped rear hub or those wanting a kit that includes replacement mounting hardware should consider other options.
- Factory-style ready-to-install hub and sealed bearing reduces installation complexity.
- Alloy steel construction and tested for impact and fatigue for improved durability.
- Designed as a direct rear replacement with 5-bolt flange for compatible Infiniti models.
- Non-ABS version not compatible with vehicles that require an ABS tone ring.
- Mounting bolts are not supplied with the hub assembly.
Verdict A straightforward, reliability-focused rear hub assembly for Infiniti Q50 owners needing a durable, factory-style non-ABS replacement, but source bolts separately if required.
2. TRQ Front Wheel Bearing & Hub Assembly Set, 2‑Piece for Infiniti Q50 (front, AWD)
| Quantity | 2 Piece |
|---|---|
| Bearing Type | Ball |
| Material | Alloy Steel |
| Specification Met | Oe |
This TRQ kit supplies both front driver and passenger wheel bearing and hub assemblies as a direct-fit replacement for AWD Infiniti Q50 models. It arrives pre-assembled so the units bolt into the knuckle without needing bearing press work, which speeds a DIY or shop installation and reduces labor time. The hubs use a gen-3 ball bearing design and machined exterior surfaces intended to match factory fitment and reduce vibration and noise when installed correctly. TRQ highlights grease-compatible bearings and provides installation videos to guide users through the swap. Practical benefits include replacing both sides at once to avoid repeated labor and having parts that many mechanics report install like factory replacements. Limitations to keep in mind are mixed long-term durability reports in customer feedback and the ABS sensor is not included so you must transfer the vehicle sensor or source one separately. Confirming exact year and AWD fitment for your Q50 before purchase is essential to avoid fit issues.
Best for: Buyers who prioritize convenience and lower repair time for an Infiniti Q50 AWD and prefer a ready-to-install, do-it-yourself friendly replacement that minimizes workshop labor.
Less Ideal for: Owners seeking a single-sided, lifetime-guaranteed bearing solution or those who require included ABS sensors and want an all-in-one OEM-equivalent package without sourcing additional parts.
- Two pre-assembled hub assemblies included so both front sides can be replaced together.
- Designed as a direct-fit replacement to simplify installation and reduce shop labor.
- Gen-3 ball bearing design and machined exterior aimed at reducing noise and vibration.
- Manufacturer provides step-by-step installation videos to assist DIYers.
- ABS sensor is not included and must be transferred or bought separately.
- Some customer reports cite premature failure, so long-term life can vary.
Verdict A convenient, pre-assembled two-piece hub set that makes front bearing replacement on AWD Infiniti Q50s faster, but plan to transfer or buy the ABS sensor separately and expect varied long-term durability.
3. Detroit Axle Front Wheel Hub and Bearing Assembly (pair) – BR930890
| Bearing Number | BR930890 |
|---|---|
| Position | Front |
| Lugs | 5-Bolts |
| ABS Type | Encoder |
| Specification Met | ISO 9001 |
This Detroit Axle kit supplies two front wheel hub and bearing assemblies intended to replace worn units on compatible Infiniti models, including many Q50 RWD years. Each assembly arrives pre-mounted so installation is a direct bolt-in job for a professional or experienced DIY mechanic, restoring wheel support, wheel alignment of the hub, and integrated ABS encoder function. Detroit Axle highlights high-frequency quenching and premium bearing steel for improved wear and corrosion resistance, which in practice means quieter operation and longer service life under normal driving. The kit uses a 5-bolt mounting pattern and includes encoder-type ABS compatibility to maintain traction/ABS system signals. Some buyers report consistently good fit and long-term reliability while others have seen early failures or fitment issues, so careful verification of vehicle year and RWD configuration is important before purchase. This part aims to match factory fit and function without performance upgrades beyond stock, making it a solid quality aftermarket replacement when the original hub is worn or noisy.
Best for: Performance-oriented buyers who prioritize restoring factory handling and ABS reliability on their Infiniti Q50 and want a high-quality aftermarket replacement rather than an OEM source.
Less Ideal for: Owners seeking upgraded performance hubs or extended heavy-duty use should consider specialty performance parts instead.
- Pre-assembled hub and bearing makes installation faster than rebuilding a bearing in-place
- Designed with encoder-style ABS sensor provision to preserve ABS and traction control function
- Manufactured with heat-treated bearing steel and high-frequency quenching for improved wear resistance
- Intended to match factory-style fit and 5-bolt mounting to simplify replacement on compatible Infiniti models
- Mixed user reports of early failures and occasional fitment mismatches across vehicle years
- Does not provide performance upgrades over factory-spec hubs; it is a like-for-like replacement
Verdict A factory-style, pre-assembled front hub pair that aims to restore Q50 handling and ABS function with improved wear resistance, but verify fitment carefully due to mixed reports of failures.
4. Torchbeam Front Wheel Bearing & Hub Assembly 513334
| Bearing Number | 513334 |
|---|---|
| Material | 55# Steel and GCr15 Steel |
| Specification Met | ISO 16949 |
This Torchbeam front wheel bearing and hub assembly (bearing number 513334) is a direct replacement designed for a range of Infiniti and Nissan rear-wheel-drive models, including the Q50 from 2014 to 2023. It installs in place of the factory hub to restore wheel support, wheel speed sensor alignment and reduce noise from a worn bearing. The unit uses hardened steel rings and a multi-seal design to resist corrosion and keep lubrication in, which should help quiet vibrations and extend service life compared with a bare bearing. For a budget-focused buyer it delivers the core function you need: correct fit, integrated studs and a sealed bearing so you can swap the assembly without pressing in a new bearing. Limitations are typical for lower-cost aftermarket hubs: long-term durability depends on installation accuracy and driving conditions, and some buyers may prefer an established OEM-brand part or professional verification of ABS sensor compatibility before installation. The product is best used as a cost-conscious repair to return a Q50 to quiet, safe operation quickly.
Best for: Cost-conscious Infiniti Q50 owners who want an economical, ready-to-install hub assembly to restore ride quality and stop bearing noise without replacing separate components.
Less Ideal for: Buyers seeking a factory-sourced branded hub or those planning high-performance or heavy-duty use should consider OEM or premium aftermarket options instead.
- Direct-fit replacement for Infiniti Q50 (2014–2023) RWD, simplifying installation
- Integrated sealed bearing and studs reduces labor compared with separate bearing replacement
- Hardened steel construction and triple oil seal design aim to resist corrosion and contamination
- Marketed with ISO 16949 specification and seller support for questions
- Long-term durability and fit depend on proper installation and real-world conditions
- Not an OEM-branded part so some buyers may prefer factory-source verification for ABS compatibility
Verdict A budget-friendly, direct-fit replacement that restores a Q50's front wheel function and quiets bearing noise, suitable for owners prioritizing cost and convenience over OEM branding.
5. TRQ Rear Wheel Bearing and Hub Assembly Set (2-piece) for Infiniti Q50
| Quantity | 2 Piece |
|---|---|
| Bearing Type | Ball Bearing |
| Specification Met | ISO 16949 |
| Compatible Lubricant | Grease |
This TRQ kit supplies both left and right rear wheel bearing and hub assemblies intended as direct-fit replacements for the Infiniti Q50. The pre-assembled hubs use a ball-bearing design and come ready to bolt into the knuckle, which speeds installation and reduces time in the garage. TRQ highlights machined exterior surfaces and industry-standard ball bearings with grease compatibility, and the package includes both driver and passenger side units so you can address both rear hubs at once. In practice the assemblies simplify a typical rear-bearing replacement job for a mechanically competent DIYer or an independent shop because you do not press bearings on and off the hub. Reports from owners indicate generally good fit and quieter operation after replacement, but there are some quality outliers in user feedback so occasional early failure is possible. Note that the ABS sensor is not included and must be transferred from the old unit or sourced separately. For risk-averse buyers focused on restoring factory-like behavior, the set offers a practical balance of convenience and value but inspect each unit at arrival and confirm exact year fitment before installation.
Best for: A risk-averse mainstream buyer who wants a ready-to-install, factory-replacement style rear hub set for routine repairs on an Infiniti Q50 and prefers parts that simplify shop or DIY installation.
Less Ideal for: Buyers seeking a complete plug-and-play solution with new ABS sensors included or those unwilling to accept some variability in aftermarket quality should consider alternatives or sourcing a hub that includes the sensor.
- Includes both left and right rear hub assemblies so both sides can be replaced at once
- Pre-assembled hub and bearing design reduces need for pressing operations during installation
- Machined exterior and ball-bearing construction aimed at matching factory fit and noise reduction
- Compatible with grease lubrication common to axle applications
- ABS sensor is not included and must be reused or purchased separately
- Some customer reports note early failures, indicating occasional quality variability
Verdict A convenient two-piece rear hub and bearing set that restores factory-style fit for Infiniti Q50 rear repairs but requires transferring or buying the ABS sensor separately.
6. TRQ Front Wheel Bearing & Hub Assembly (fits Infiniti Q50 AWD)
| Compatible Vehicle | Infiniti Q50 AWD (2014–2023) |
|---|---|
| Bearing Type | Ball Bearing |
| Material | Alloy Steel |
| Wheel Stud Quantity | 5 |
This TRQ hub assembly is a pre-assembled replacement for the front wheel on Infiniti Q50 AWD models (2014–2023). It installs as a direct-fit unit and is intended to restore wheel running quietly and squarely after a failed bearing. The part ships with the hub, bearing, and wheel studs already installed so installation is mainly bolt-on once the old hub is removed and the knuckle is cleaned. Notable features include a machined alloy-steel exterior, a ball-bearing design, and included wheel studs which reduce parts hunting during a repair. Practical benefits are straightforward: it gets the car back on the road without hub machining or bearing presses, and TRQ supplies DIY videos to guide less-experienced installers. Limitations to consider are typical of aftermarket hub assemblies — long-term durability can vary compared with factory-quality parts, and some customers report early failures in isolated cases, so expect to monitor the repair and keep documentation for warranty follow-up if needed.
Best for: Practical optimizers who want a cost-conscious, ready-to-install replacement that minimizes garage time and avoids sourcing extra hardware.
Less Ideal for: Buyers who prioritize long-term factory-quality longevity above upfront value or who prefer dealer-sourced parts and full OEM validation.
- Direct-fit pre-assembled hub and bearing for Infiniti Q50 AWD which simplifies installation
- Includes wheel studs so no separate hardware purchase is required
- Machined alloy-steel construction for precise fit and resistance to corrosion during installation
- Ball-bearing design intended to reduce noise and vibration after replacement
- ABS sensor is not included so vehicles relying on an integrated sensor may need additional parts or sensors
- Aftermarket longevity is less certain than factory-quality parts based on mixed user reports
Verdict A budget-friendly, pre-assembled front hub for Infiniti Q50 AWD that simplifies replacement and saves time, but monitor long-term durability compared with factory-quality parts.
7. TRQ Front Wheel Bearing & Hub Assembly Set (2-piece)
| Fitment | Infiniti Q50 2014-2023 Rear Wheel Drive |
|---|---|
| Quantity | 2 Piece |
| Bearing Type | Ball Bearing |
| Compatible Lubricant | Grease |
| Specification Met | ISO 16949 |
This TRQ kit replaces both front driver and passenger wheel bearing and hub assemblies and is intended as a direct-fit replacement for compatible Infiniti Q50 rear-wheel-drive models from 2014–2023. It arrives as pre-assembled hub units so installation is typically straightforward for a professional or experienced DIYer and TRQ supplies installation videos to guide the process. The assemblies use ball bearings, come greased, and meet ISO 16949 specification, which supports reliable rotation, reduced road noise, and restored wheel stability when installed correctly. Buyers report quiet operation and correct fit on many Infiniti applications, and the packaged pair makes it convenient to address both sides at once. Quality control appears generally solid, but there are isolated reports of damaged or incomplete units arriving, so inspect parts before installation and be prepared to return defective items. This is a practical, cost-conscious alternative to factory replacements for Infiniti Q50 owners who want a balance of value and fitment without aftermarket modification.
Best for: Balanced buyers who prioritize reliable fitment and value for routine repairs on an Infiniti Q50 and who plan to either install the parts themselves or have a trusted mechanic do the work.
Less Ideal for: Owners seeking an exact long-term OEM replacement under an extended warranty program or those who prefer dealer-only parts and service should consider factory-quality alternatives.
- Direct-fit pre-assembled hub and bearing units for quicker installation on compatible Infiniti Q50 rear-wheel-drive models
- Supplied as a matched pair so both sides can be replaced at once
- Ball bearing design and factory-grade lubrication reduce noise and improve rotational smoothness
- Manufacturer lists ISO 16949 compliance and includes installation videos to support DIY installs
- Some customers reported receiving damaged or incomplete units, so incoming inspection is necessary
- Not a guaranteed long-term match for every vehicle build—longevity may vary compared with higher-cost factory-quality parts
Verdict A practical, value-focused direct-fit hub and bearing pair for Infiniti Q50 owners who want quieter, restored front-end rotation without the dealer price.
Choosing the Right Infiniti Q50 Wheel Hub Assembly: Key Factors to Consider
Fitment and Vehicle Specificity
Correct fitment is critical because a hub that does not match the Infiniti Q50 mounting pattern, wheel studs, or sensor ports will not install or function properly. Confirm bolt pattern orientation, stud size and length, and any integrated sensor locations to ensure the assembly mates cleanly to the knuckle and wheel.
Choosing a hub labeled for the Q50 reduces the risk of alignment issues and premature wear. Even small deviations in hub dimensions can change hub preload and wheel bearing life, so prioritize parts with documented vehicle-specific fitment.
Bearing Precision and Load Capacity
Bearing quality directly affects noise, vibration, and service life. Look for assemblies with tight bearing tolerances and specifications that match or exceed the original equipment load ratings for the Infiniti Q50. Bearings designed to handle the vehicle's axle loads will resist deformation and reduce heat build-up under normal driving.
Higher-precision bearings usually translate to quieter operation and longer intervals between service. For frequent towing or spirited driving, choosing a hub with a higher load rating can improve durability.
Seals and Corrosion Resistance
Effective seals keep contaminants out and lubricant in, which preserves bearing life. For the Infiniti Q50, choose hubs with quality lip seals and protective covers that resist water, dirt, and road salt exposure. Corrosion-resistant coatings on the hub and flange help prevent rust that can complicate future removal.
Durable sealing reduces the chance of bearing failure due to contamination and can extend service intervals, particularly in wet or winter climates.
Integrated Sensor Compatibility
Some wheel hub assemblies include mounting provisions or integrated mounts for speed or ABS sensors. If your Infiniti Q50 has wheel speed sensors, ensure the replacement hub supports the same sensor type and mounting geometry. Mismatched sensor fitment can lead to warning lights or incorrect ABS operation.
When a hub includes a provision for a sensor, verify clearance and connector location to make sure the sensor will seat correctly without strain on the wiring harness.
Installation and Serviceability
Consider how easy the assembly is to install and later service. Features such as pre-pressed bearings, captive studs, and clearly machined mounting faces can shorten installation time for the Infiniti Q50 and reduce the chance of installation errors. Parts that require fewer additional components save effort during replacement.
Also factor in whether the hub allows for conventional torque procedures and whether replacement requires special tools. Better serviceability reduces labor time and the risk of damage during installation.
Noise, Vibration, and Longevity
Hub assemblies with well-balanced hub flanges and precise bearings produce less vibration and noise, improving ride quality on the Infiniti Q50. Look for indications of quality control such as balanced machining and consistent bearing preload specifications. Longevity is influenced by material choices, bearing seals, and manufacturing tolerances.
Expect that hubs with tighter quality control and robust construction will maintain quieter performance and avoid premature failures, which is especially important for daily-driven vehicles.
FAQ
What are common signs the Infiniti Q50 wheel hub assembly needs replacement?
Common signs include persistent grinding or growling noise from a wheel, noticeable vibration in the steering or floor at speed, and uneven tire wear. You may also notice looseness at the wheel or a vehicle pull during braking. These symptoms often indicate bearing wear or hub damage that warrants inspection.
Can I replace a wheel hub assembly on the Infiniti Q50 myself?
Many mechanically inclined owners can replace a hub assembly with basic automotive tools and a torque wrench, but the job can require removing brake components and the wheel knuckle. Proper torqueing of mounting bolts and correct bearing preload procedures are important. If you do not have experience or the required tools, professional installation is recommended.
How long does a wheel hub assembly typically last on an Infiniti Q50?
Hub assembly life varies with driving conditions but often lasts many tens of thousands of miles under normal use. Exposure to water, road salt, rough roads, or heavy loads can shorten service life. Regular inspections and prompt attention to noise or vibration help catch issues early and can extend hub longevity.
Will a bad wheel hub assembly cause ABS or traction control lights on the Infiniti Q50?
Yes, if the assembly affects a wheel speed sensor or its mounting, you may see ABS or traction control warnings. Faulty sensor signals caused by a damaged mounting surface or connector can trigger system alerts. Ensure any replacement hub supports the same sensor mounting geometry to avoid such issues.
What should I know about torque specs and tightening when installing a hub on an Infiniti Q50?
Proper torqueing of hub mounting bolts and axle nuts is important to achieve correct clamping and bearing preload. Follow factory torque specifications and tightening sequences to avoid overloading the bearing or creating uneven clamping. If you are unsure of the specific numbers, consult the Infiniti Q50 service literature or a qualified technician.
Are rebuilt or remanufactured wheel hub assemblies a good option for the Infiniti Q50?
Rebuilt hubs can be a viable alternative if they are remanufactured to strict tolerances and include new seals and bearings where needed. The critical factors are the quality of the remanufacturing process and whether the unit meets original fit and tolerance requirements. Verify that the remanufacturer follows thorough inspection and replacement procedures.
How We Chose the Best Infiniti Q50 Wheel Hub Assembly
We focused on wheel hub assemblies that offer precise fitment and robust bearing performance for the Infiniti Q50. Our editorial filters prioritized units designed specifically for the vehicle, measured bearing tolerance and load ratings, and assessed sealing and corrosion resistance to ensure long-term durability. Other criteria included hub material and machining quality, integrated sensor compatibility when applicable, and serviceability for common maintenance tasks. We also considered axle load capacity and manufacturing tolerances that affect vibration and noise. We excluded hubs lacking clear vehicle-specific fit data, parts without adequate sealing or tolerance information, and assemblies with unclear bearing specifications. The final list favors parts that balance reliable bearing performance, proper fitment, corrosion protection, and straightforward installation characteristics.
Our full evaluation process is outlined in our review methodology.
Conclusion
When replacing a wheel hub assembly on an Infiniti Q50, prioritize accurate fitment, bearing precision, and robust sealing to restore quiet operation and reliable performance. Consider sensor compatibility and installation ease to avoid additional complications. Weigh the tradeoffs between long-term durability and serviceability: a well-specified hub with quality seals and proper load ratings will reduce noise and extend service life, while easier-to-install assemblies can lower labor risk and time.
Explore More:
- Check out all Infiniti Q50 parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
