Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Honda CR-V shows vibration, uneven tire wear, or wheel noise, choosing the right wheel hub assembly matters for safety and drivability. You want a direct-fit component that restores correct wheel alignment and smooth rotation without extra work. This guide covers the top shortlisted wheel hub assemblies for the Honda CR-V, each chosen for fit reliability and bearing longevity. We evaluated serviceability, installation compatibility, and long-term durability to help you decide which option suits your needs.
Looking for other parts? See all Honda CR-V parts & accessories.
Top Picks at a Glance
1. KAX 512501 Rear Wheel Bearing Hub Assembly for Honda CR-V 2012–2016 AWD
| Bearing Number | 512501 |
|---|---|
| Specification Met | ISO 16949 |
| Material | 55# Steel and GCr15 Steel |
This KAX 512501 rear wheel bearing hub assembly is a direct-fit replacement intended for Honda CR-V 2012–2016 AWD models. It combines a hub and sealed bearing into one unit so you replace the worn part, restore smooth wheel rotation, and maintain ABS sensor function without needing to service the old bearing separately. The listing notes steel construction and ISO 16949 conformance, which suggests factory-style manufacturing controls. In practice it is used when you hear hub noise, feel play at the wheel, or have an ABS fault related to the rear hub. Installation is straightforward for a competent DIYer or mechanic since it comes as a complete assembly. Benefits include vehicle-tested fitment and sealed bearing convenience that reduce installation time. Important limitations are the single-vehicle fitment requirement and reliance on proper torque and installation technique to avoid premature failure; longevity will also depend on driving conditions and maintenance. The product is focused on restoring reliable wheel operation rather than offering performance upgrades.
Best for: Reliability-focused buyers who prioritize restoring factory-like wheel operation on a Honda CR-V 2012–2016 AWD and want a straightforward, vehicle-tested replacement.
Less Ideal for: Shoppers looking for performance or heavy-duty upgraded hubs, or those who need parts for other vehicles or non-AWD CR-V configurations should consider alternatives.
- Direct-fit replacement designed for Honda CR-V 2012–2016 AWD which simplifies fitment checks
- Sealed hub-and-bearing unit reduces assembly time compared with separate bearings
- Manufacturing noted to meet ISO 16949 indicating controlled quality processes
- Includes ABS-compatible design to maintain wheel-speed sensing when replacing the rear hub
- Only specified for rear hub fitment on the CR-V AWD application so not universal
- Durability depends on correct installation and vehicle usage; not a performance upgrade
Verdict A practical, ISO-backed rear hub assembly for CR-V 2012–2016 AWD owners who want a reliable, direct replacement to restore factory wheel function.
2. Detroit Axle Rear Wheel Bearing Hub Assembly with ABS Encoder
| Bearing Number | 512345 |
|---|---|
| Material | Alloy Steel |
| Bearing Type | Integral |
| Compatible Lubricant | Grease |
| Specification Met | ISO 9001 |
This Detroit Axle rear wheel bearing hub assembly is a ready-to-install replacement for the rear of compatible Honda CR-V 4WD models. It combines the wheel hub and bearing into a single integral unit with a built-in ABS encoder so you can swap the old hub without separate sensor work. Typical use is a direct replacement during rear hub service or when symptoms like noise, play, or ABS warnings appear. The unit is alloy steel, shipped as a single hub assembly, and the listing notes impact, wear, and fatigue testing plus a long-term warranty from the maker. In practice the integrated design speeds up installation and reduces parts sourcing since the sensor encoder is included, but the hub does not include mounting bolts so you may need to re-use factory hardware or source bolts separately. Build quality is generally reported as good and the hub comes pre-packed with grease, though a small number of buyers reported fitment issues on non-CR-V vehicles and one-off manufacturing inconsistencies; careful fit check at install is recommended.
Best for: Buyers who prioritize convenience and quick roadside or DIY repairs on a Honda CR-V and want a near drop-in replacement that reduces install steps.
Less Ideal for: People seeking an exact OEM-sourced hub with included fasteners or those unwilling to check fit at installation should consider factory-quality alternatives.
- Integrated hub and bearing reduces labor compared with separate components
- Built-in ABS encoder avoids separate wheel speed sensor replacement
- Alloy steel construction and advertised testing aim to provide durable service
- Ships with factory grease preinstalled for immediate installation
- Mounting bolts are not included and must be reused or purchased separately
- A minority of users reported fitment or machining inconsistencies requiring replacement
Verdict A convenient, integrated rear hub assembly for Honda CR-V 4WD that speeds installation but requires sourcing or reusing mounting bolts and a quick fit check.
3. A-Premium Front Steering Knuckle and Wheel Hub Bearing Assembly for Honda CR-V 2007–2009 (Pair)
| Vehicle Fitment | Honda CR-V 2007-2009 L4 2.4L |
|---|---|
| Position | Front left and right |
| Material | Steel |
| Loaded Knuckle | Yes (hub and bearing included) |
This loaded steering knuckle assembly replaces the front left and right knuckles on 2007–2009 Honda CR-V 2.4L models and arrives preassembled with hub and bearing to simplify installation. Typical use is a direct suspension replacement when worn bearings, steering play, vibration, or wheel wobble appear; fitting both driver and passenger sides lets you address front-end issues in one go. Notable features include a steel knuckle body and factory-style loaded hub and bearing so you avoid pressing bearings in and out during installation. Practical benefits are faster shop time, reduced risk of damaging spindles, and restored steering feel when the hubs are the source of noise and pull. Limitations to consider are occasional reports of incorrect spindle nut sizing and the absence of an axle, which may require verifying included fasteners before starting work. The assemblies appear to match referenced part numbers for direct replacement and are best for owners who prioritize reliable, factory-quality hub replacements that cut install complexity.
Best for: Performance-oriented buyers who want a factory-quality replacement that restores steering precision and reduces workshop time when servicing the front hubs on a Honda CR-V.
Less Ideal for: Shoppers who need a complete axle-level rebuild or exact OEM fastener kits without verification should consider alternatives or source missing hardware before installation.
- Loaded assembly includes hub and bearing to avoid pressing bearings and speed installation
- Steel knuckle construction for durability and alignment with factory replacement expectations
- Sold as a front left and right pair so both sides can be serviced at once
- Fits Honda CR-V 2007–2009 2.4L according to the listed reference part numbers
- Some buyers reported the supplied spindle/axle nut was the wrong size for certain vehicles
- Axle is not included so additional parts may be needed during install
Verdict A factory-style, loaded front knuckle and hub pair that speeds installation and restores steering performance on 2007–2009 Honda CR-Vs, but check fasteners before you install.
4. Autoround 512344 Rear Wheel Hub and Bearing Assembly (5-Lug)
| Fitment | Honda CR-V 2007-2011 Rear FWD |
|---|---|
| Lug Count | 5 Lugs with ABS |
| Bearing Type | Ball Bearing |
| Material | Steel Alloy |
This Autoround rear wheel hub and bearing assembly is a direct-replacement style part intended for the rear, front-wheel-drive positions on compatible Honda CR-V models. It installs where the wheel mounts and supports rotation while incorporating an ABS tone ring for wheel-speed sensing. The sealed ball-bearing design and grease compatibility help keep contaminants out and reduce noise compared with a worn hub, and the listing notes factory-spec fit and durability testing to ease installation and fitment concerns. Typical use is as a single-side replacement during routine repair or after a failed bearing produces vibration, noise, or ABS warnings. The product comes as a complete hub assembly with five-lug mounting hardware pattern so you do not need to press bearings separately. Limitations are that this is an aftermarket budget option so longevity may vary by driving conditions, and you may still need a professional press or mechanic for correct installation and torque procedures. No additional sensors or wheel studs beyond the included hub are indicated in the item details.
Best for: Budget-conscious DIYers or owners looking for an affordable, straightforward rear hub replacement to restore normal wheel rotation and ABS function on a compatible Honda CR-V.
Less Ideal for: Those seeking a premium or performance-grade hub for heavy towing or aggressive driving should consider higher-end or OEM replacements instead.
- Complete hub-and-bearing assembly simplifies replacement compared with separate bearing-only repairs.
- Sealed ball-bearing design helps limit contamination and reduce noise and vibration.
- Includes ABS tone ring for wheel-speed sensing on equipped CR-Vs.
- Sold as a single unit sized for five-lug rear hubs, matching factory mounting pattern.
- Aftermarket budget part so long-term durability can vary under heavy use.
- Sold as one assembly only so buyers must purchase both sides if replacing a pair.
Verdict A cost-focused, ready-to-install rear hub assembly for compatible Honda CR-Vs that restores wheel rotation and ABS sensing at a budget price.
5. A-Premium Front Left Steering Knuckle with Wheel Bearing Hub Assembly for Honda CR-V (2015–2016) FWD Driver Side
| Vehicle Fitment | Honda CR-V 2015-2016 (FWD only) |
|---|---|
| Position | Front Left driver side |
| Loaded Knuckle | Knuckle, hub and bearing included |
| Dust Shield | Included |
This A-Premium steering knuckle with integrated wheel bearing and hub is a direct-fit replacement for the front left (driver) side of 2015–2016 Honda CR-V FWD models. It ships as a loaded assembly that includes the knuckle, hub and bearing and arrives with a dust shield already installed, which simplifies installation compared with swapping separate components. In normal use it restores proper wheel mounting, smooth rotation, and helps eliminate symptoms like vibration, uneven tire wear and steering pull that come from a worn hub or loose knuckle. The listing states the parts meet or exceed factory specifications and provides OEM reference numbers to verify fitment. Limitations to consider are that this unit is for FWD CR-Vs only and excludes axle components, so AWD vehicles and models like i-Style or LX are not compatible; professional installation is recommended because the part replaces suspension hardware and affects safety. For a risk-averse buyer seeking a factory-replacement style repair, this keeps the front suspension close to original operation while avoiding the hassle of separate bearing press work.
Best for: A risk-averse mainstream buyer who prioritizes a dependable, factory-style repair and wants a ready-to-install replacement that minimizes workshop time and uncertainty.
Less Ideal for: Buyers with AWD CR-Vs, i-Style or LX trims, or those seeking a complete drivetrain overhaul including axle replacement should look elsewhere.
- Loaded assembly includes knuckle, hub and bearing for faster replacement without pressing bearings separately
- Includes dust shield which reduces corrosion and debris exposure to the hub area
- Made to meet or exceed factory specifications and lists OEM reference numbers for fit verification
- Compatible only with front-wheel-drive 2015–2016 CR-V variants and excludes i-Style and LX trims
- Does not include axle or CV components so additional parts may be required for a full drivetrain repair
Verdict A practical, factory-style loaded steering knuckle and hub assembly for risk-averse CR-V owners with FWD 2015–2016 models who want a straightforward replacement.
6. Detroit Axle Rear Wheel Bearing Hub Assembly (pair) for 2007–2011 Honda CR-V, 5-Lug with ABS
| Fitment | 2007–2011 Honda CR-V (rear, 5 lug, with ABS encoder) |
|---|---|
| Quantity | 2 hub assemblies (left and right) |
| Position | Rear left and right |
| Lug Pattern | 5 bolts |
These Detroit Axle rear hub assemblies replace both left and right rear hubs on 2007–2011 Honda CR-Vs and include integrated wheel bearings and ABS speed sensors for a one-step swap. Installation is typical for rear hub replacements: remove the old hub, press or unbolt as required, then fit the new unit and plug in the provided speed sensor. The assemblies are sold as a pair, come with a factory-style flange and five-lug pattern, and are tested for impact and fatigue according to the product listing. For a practical DIYer or an independent shop this kit delivers an OEM-style fit and the convenience of preassembled hubs, which avoids pressing in new bearings. Downsides to expect are the normal variability of aftermarket parts versus factory items and occasional warranty/service hassles reported by some buyers; long-term lifespan can depend on installation practice and driving conditions. If you need a straightforward, value-focused replacement for a CR-V’s rear hubs, these offer a convenient, ready-to-install option.
Best for: Practical optimizers who want a cost-effective, ready-to-install rear hub solution for routine CR-V maintenance and prefer minimizing shop labor by using preassembled units.
Less Ideal for: Those seeking an exact factory-sourced replacement from Honda or buyers who prioritize extended dealer-backed warranties should look elsewhere.
- Sold as a matched left/right pair for complete rear replacement
- Integrated bearing and ABS speed sensor reduce labor compared with separate bearing installs
- Direct-fit design for 2007–2011 Honda CR-V rear application with 5-lug pattern
- Undergoes stated impact and fatigue testing for durability assurance
- Aftermarket quality can vary compared with factory parts and lifespan is not guaranteed for all use cases
- Some customers report difficulty or delays when pursuing warranty service
Verdict A budget-friendly, preassembled rear hub pair that simplifies rear-wheel bearing replacement on 2007–2011 Honda CR-Vs while trading off the consistency and warranty backing of factory-sourced parts.
7. TRQ Rear Wheel Bearing and Hub Assembly Set (2‑Piece) for Honda CR-V AWD
| Fitment | 2012–2016 Honda CR-V All Wheel Drive rear driver & passenger |
|---|---|
| Quantity | 2 Piece kit |
| Bearing type | Ball Bearing |
| Compatible lubricant | Grease |
| Exterior | Machined |
This TRQ kit replaces both rear wheel bearing and hub assemblies on AWD Honda CR-V models and is sold as a direct-fit two-piece set for the driver and passenger sides. It arrives pre-assembled to simplify installation and is intended for DIY mechanics or shops to swap in place of worn factory units. The assemblies use ball bearings with grease lubrication and a machined aluminum exterior that aims to reduce noise and vibration while restoring rear-end stability. TRQ provides installation videos and compatibility references to help confirm fit before purchase. Practical benefits include quieter highway operation and eliminating play or rumble from failing hubs, plus the convenience of replacing both sides at once. Some buyers have reported occasional quality or missing-part issues, so a careful inspection on arrival is wise and professional installation may catch fit or ABS sensor concerns. If long-term durability under heavy use is critical, consider monitoring the parts after installation since user experiences vary.
Best for: Balanced, practical buyers who want a factory-style replacement to quiet rear-end noise and restore stability on a Honda CR-V while keeping installation straightforward and reasonably affordable.
Less Ideal for: Buyers seeking a lifetime-guaranteed OEM part or those who prefer dealer-installed factory parts for warranty continuity should consider factory replacement options instead.
- Direct-fit design for rear driver and passenger sides on AWD Honda CR-V (2012–2016) simplifies installation
- Comes as a matched two-piece kit so both rear hubs are replaced together to restore symmetry and reduce noise
- Pre-assembled units eliminate bearing packing and reduce install time compared with separate bearings and hubs
- Manufacturer provides step-by-step installation videos to assist DIYers
- Some buyers report inconsistent quality control and occasional missing or damaged components on arrival
- A few installs have required attention to ABS sensor connections or additional mechanical adjustments
Verdict A practical, direct-fit two-piece rear hub and bearing kit that restores quiet, stable rear-wheel operation on AWD Honda CR-Vs but inspect parts on arrival for quality issues.
Choosing the Right Honda CR-V Wheel Hub Assembly: Key Factors to Consider
Fitment and Vehicle Compatibility
Correct fitment is essential because the hub must match the Honda CR-V hub flange, bolt pattern, and axle interface to ensure safe mounting. A precise match reduces installation time, prevents alignment issues, and eliminates the need for adaptors or modifications.
Mismatched hubs can cause uneven loads, premature bearing wear, or ABS sensor misalignment. Verify bolt pattern, stud thread size, and any built-in wheel speed sensor connector locations to avoid fitment surprises.
Bearing Quality and Durability
The bearing inside the hub carries radial and axial loads and largely determines service life under real driving conditions. Look for hubs with high-quality bearing materials, proper preload control, and factory lubrication to handle highway speeds and urban stop-and-go use.
Durability matters because replacing a hub is labor-intensive. Better bearings resist heat, contamination, and fatigue, which reduces the chance of repeat failures and extended repair intervals.
Sealing and Corrosion Resistance
Effective seals prevent water, road salt, and debris from entering the bearing, which slows wear and avoids contamination-related failure. Hubs with robust seals and corrosion-resistant finishes help maintain performance in wet or winter conditions.
Corrosion protection on mounting surfaces and studs also makes future removal easier and helps preserve torque accuracy over time. Consider coatings and seal designs that suit your local climate and driving environment.
ABS Sensor Integration
If the Honda CR-V hub location includes a wheel speed sensor, integrated or compatible ABS sensor provisions are important. Proper sensor mounting and signal integrity affect braking stability and traction control systems.
Choose assemblies that provide clear sensor interfaces or include preinstalled sensors to reduce wiring work and ensure correct signal alignment. Incorrect sensor fitment can trigger fault codes or impair safety features.
Serviceability and Installation
Ease of installation affects labor time and the likelihood of correct assembly. Hubs designed for straightforward bolt-on installation with accessible mounting points and clear torque specifications reduce the risk of installation errors.
Consider whether hub replacements require press-fit operations, hub pullers, or if they are direct-replacement units. Also check for included hardware and documentation so a technician can complete the job without additional parts.
Warranty and Support Documentation
A clear warranty and accessible technical documentation indicate manufacturer confidence and help if the part fails prematurely. Warranty terms can reflect expected longevity and manufacturing standards.
Support documentation should include torque specs, mounting sequence, and sensor wiring notes when applicable. This information helps maintain correct installation and prevents avoidable follow-up repairs.
FAQ
What are common signs a Honda CR-V wheel hub assembly is failing?
Common signs include persistent wheel noise such as grinding or humming, vibration through the steering wheel, and uneven tire wear. You might also notice occasional ABS warning lights if a wheel speed sensor is affected. Diagnosis usually starts with a road test and a wheel-bearing check at the lifted wheel.
Can I replace only the bearing instead of the whole hub on a Honda CR-V?
Sometimes bearings are available as separate service parts, but many modern assemblies are sealed and designed as a single unit. Replacing the entire hub ensures correct preloading and sealing. Whether a bearing-only repair is appropriate depends on the vehicle year and the specific hub design.
How important are torque specs when installing a wheel hub assembly?
Accurate torque is critical because under-torquing can allow movement and wear, while over-torquing can damage threads or bearings. Follow the published torque values and tightening sequence to ensure proper clamping and long-term reliability. If torque specs are not available, consult repair documentation before installation.
Is wheel hub noise always a sign of bearing failure?
Not always. Grinding or humming often indicates bearing wear, but noise can also come from loose hardware, rotor issues, or tire problems. A proper inspection should isolate the wheel hub and bearing from brakes and tires to identify the true source of the noise.
Should I choose a hub with an integrated ABS sensor for the Honda CR-V?
Choosing a hub with an integrated ABS sensor can simplify installation and ensure correct sensor alignment. If the original hub location uses a sensor, an integrated or prewired option reduces wiring work and potential compatibility issues. Verify the connector type and signal orientation before installation.
How We Chose the Best Honda CR-V Wheel Hub Assembly
We focused on components specifically designed for the Honda CR-V and filtered candidates by direct fitment and documented compatibility. Our editorial process prioritized bearing life estimates, hub sealing and moisture protection, and the presence of integrated sensors where applicable. We also considered corrosion-resistant materials, recommended torque and mounting interfaces, and the ease of installation for technicians. Excluded items included generic or universal hubs lacking clear CR-V vehicle fitment, rebuild kits that require extensive machining, and products without published torque or mounting specifications. The final list emphasizes proven fit, robust bearing design, effective sealing against contaminants, and clear serviceability for routine replacement.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize correct fitment, bearing quality, and sealing when selecting a Honda CR-V wheel hub assembly. Those factors have the biggest impact on safety, ride quality, and how long the replacement lasts. Balance ease of installation and clear torque or sensor documentation against warranty support. Focusing on these tradeoffs helps you choose a hub that restores smooth operation and minimizes the chance of repeat service.
Explore More:
- Check out all Honda CR-V parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
