Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If you drive a Ford Edge, a worn wheel hub assembly can affect ride quality, handling, and safety. Choosing the right wheel hub assembly matters because the hub houses the wheel bearing and secures the wheel to the vehicle, so a poor choice can lead to noise, vibration, or premature failure. This guide highlights seven shortlisted wheel hub assemblies selected for fitment, bearing durability, and straightforward installation for the Ford Edge. Below we outline the evaluation criteria used and what to look for during replacement, then present the top options chosen for this vehicle.
Looking for other parts? See all Ford Edge parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | A-Premium Wheel Bearing and Hub Assembly (5-Lug) |  |
| Most Popular A crowd favorite that many people choose with confidence | MotorbyMotor 513394 Front Wheel Bearing Hub Assembly with ABS |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Rear Wheel Hub Bearing Assembly (pair) |  |
| Best Budget The cheapest option that still gets the job done reliably | Autoround 513275 Wheel Hub Bearing Assembly with ABS, 5-Lug |  |
| Most Sold A high-volume bestseller chosen again and again | A-Premium Front Steering Knuckle and Wheel Bearing Hub Assembly (Left & Right) for Ford Edge 2007–2010 |  |
| Best Value for Money The sweet spot between price and what you get | Detroit Axle Rear Wheel Bearing Hub Assembly (fits Ford Edge 2011–2014) |  |
| Best Overall The best all-around choice for most situations | PAROD Wheel Hub & Bearing Assembly 513275 |  |
1. A-Premium Wheel Bearing and Hub Assembly (5-Lug)
| Fitment Position | Rear Side (Ford Edge 2011-2014) |
|---|---|
| Wheel Studs | 5-Lug |
| Pre-Greased | Yes |
| Flange Type | 4-Hole Flange |
| Bearing Type | Ball Bearing |
This A-Premium hub assembly replaces a worn Ford Edge rear hub by combining a pre-greased ball bearing, integrated wheel studs, and sealing components into a single unit. It installs in the rear position on Ford Edge 2011–2014 and is intended to eliminate symptoms like wheel noise, steering vibrations, and grease leakage without reusing old parts. The assembly uses GCr15 and 65Mn steel and includes a flange with four mounting holes and five wheel studs sized to match factory fitment, so it mates directly to the rotor and wheel hardware. Practical benefits include easier installation versus rebuilding a hub, a ready-to-fit replacement that restores ride quietness, and the convenience of a pre-greased bearing. Reported limitations include occasional fitment mistakes and mixed long-term durability reports, so confirm vehicle year and side before ordering and plan to inspect for premature wear during routine service intervals.
Best for: Practical, reliability-focused buyers who prioritize restoring quiet, predictable rear-wheel behavior on a Ford Edge 2011–2014 with a straightforward replacement rather than rebuilding components.
Less Ideal for: Those who need a hub with an integrated wheel speed sensor or who require an extended-life premium bearing for heavy towing or commercial use should consider alternatives.
- Pre-greased integrated bearing reduces installation prep and initial break-in.
- Designed with factory-style 5-lug studs and 4-hole flange for direct fit to Ford Edge rear rotors.
- Includes sealing components and new axle spline interface to address common leak and vibration causes.
- Made from hardened steel grades intended for axial and radial load capacity.
- Fitment can be specific to year and axle side so ordering the wrong position has occurred.
- Some users report shorter-than-expected service life in heavy-duty use scenarios.
- Does not include a speed sensor so it is not for Edge applications requiring a sensor-integrated hub.
Verdict A ready-to-install, pre-greased rear hub assembly that restores quiet operation on Ford Edge 2011–2014 but check fitment and long-term durability expectations before choosing it.
2. MotorbyMotor 513394 Front Wheel Bearing Hub Assembly with ABS
| Placement on Vehicle | Driver(LH Left) or Passenger(RH Right) Side Front |
|---|---|
| Number Of Lug Bolts Included | 5 |
| Number ABS Sensor Ring Teeth | 44 |
| ABS Ring Type | Magnetic |
| Number Of Bolts To Knuckle | 4 |
This MotorbyMotor 513394 is a complete front wheel hub and bearing assembly intended to replace a worn unit on compatible Ford Edge and related Lincoln models. It arrives pre-lubricated and includes an integrated magnetic ABS ring, five lug studs, and a quad-lip seal to keep contaminants out. In use it replaces the hub and bearing as a single unit, so installers avoid pressing bearings and can restore quiet rotation and correct ABS signals more quickly. The listing highlights low-runout engineering to reduce noise and vibration and premium grease for initial protection. Customer reports show generally good fit and smoother rotation versus some aftermarket alternatives, though there are occasional quality-control complaints such as premature bearing failure or damaged ABS wiring on arrival. This product is practical for routine replacement when you want a factory-quality style swap without bearing-press work, but expect to inspect the ABS cable and mounting flange during install and be prepared for possible returns if defects appear.
Best for: Buyers who prioritize convenience and a fast, bolt-in repair for Ford Edge front hubs and prefer replacing the whole assembly to avoid specialized tooling.
Less Ideal for: Drivers who want to rebuild a hub by replacing only the bearing or who need a guaranteed OEM-sourced part for dealer-level assurance should consider other options.
- Complete hub-and-bearing unit reduces the need for bearing press work and speeds installation
- Integrated magnetic ABS ring restores wheel-speed sensing without separate components
- Pre-lubricated with grease and quad-lip seal to protect bearings from contaminants
- Low-runout design aimed at reducing road noise and vibration
- Some buyers reported quality issues including early bearing failure or damaged ABS wiring on arrival
- Fitment problems reported in a few cases where stud size or alignment did not match vehicle
Verdict A convenient, ready-to-install hub-and-bearing assembly for Ford Edge owners who want a quick factory-style replacement, but inspect for installation damage and occasional quality issues.
3. Detroit Axle Rear Wheel Hub Bearing Assembly (pair)
| Brand | Detroit Axle |
|---|---|
| Bearing Number | 513275 |
| Bearing Type | Hub Bearing |
| Compatible Lubricant | Grease |
| Set Name | Rear Wheel Bearing Hubs Assembly Kit |
This Detroit Axle kit supplies two rear wheel hub bearing assemblies intended as direct replacement rear hubs for Ford Edge models in the listed years. Each hub includes an integrated bearing and ABS encoder so it installs in place of the factory unit and restores wheel rotation, bearing support, and ABS speed sensing without needing a separate bearing press for some installations. Typical use is a like-for-like swap when a rear bearing starts to whine, shows play, or triggers an ABS fault. The assemblies are alloy steel with grease-compatible sealed bearings and a 4-bolt square flange to match factory mounting. Buyers will appreciate that the pair covers both sides so you can replace both rears together for consistent handling and longevity. Limitations to note are that fitment must match the Ford Edge year and ABS encoder type exactly and that some buyers report occasional returns or surface corrosion on units received, so inspect parts on arrival before installation.
Best for: Performance-oriented owners who want a factory-replacement style rear hub to restore handling and ABS function on a Ford Edge and prefer replacing both sides together for balanced performance.
Less Ideal for: Owners seeking a long-term, high-mileage premium rebuild solution or those who need hubs for vehicles other than the specified Ford Edge model years should consider alternatives.
- Sold as a pair so both rear hubs can be replaced at once for balanced performance
- Integrated ABS encoder and sealed bearing simplify installation and restore ABS function
- Alloy steel construction aimed at durability under normal driving loads
- Not a universal fit so it must match Ford Edge year and ABS encoder type exactly
- Some buyers reported units with surface rust or returned items on rare occasions
Verdict A practical, performance-oriented pair of rear hub assemblies that restore factory-style function for the Ford Edge when fitment matches, offering good value with occasional quality-control caveats.
4. Autoround 513275 Wheel Hub Bearing Assembly with ABS, 5-Lug
| Compatible vehicles | Ford Edge 2011-2014 |
|---|---|
| Lug count | 5 Lugs |
| ABS | Yes |
| Manufacturer part number | 513275 |
This Autoround 513275 wheel hub assembly replaces a failed hub and integrated bearing and is sold as a ready-to-install unit for compatible Ford Edge applications. It is used to restore wheel mounting, maintain correct wheel alignment, and provide wheel-speed sensor signals for the ABS system. The assembly ships with the hub, bearing, and mounting flange preassembled so installation is straightforward for a mechanic or experienced DIYer when the correct hub is selected. Notable features include a 5-lug pattern, ABS sensor provision, and flange and bolt circle dimensions that match the factory-style component. In practice it offers a low-cost alternative to factory parts with generally good fit and reliable performance according to owner reports, but some buyers have seen fitment issues where studs or dimensions did not match their vehicle variant. If replacement is needed, expect standard hub-press and torque procedures and check compatibility carefully before installation. This unit is attractive for budget repairs but keep in mind occasional variation in fitment means a local parts check or test fit may be required.
Best for: Budget-conscious Ford Edge owners looking to replace a failing hub/bearing with a low-cost, ready-to-install assembly to get the vehicle back on the road without paying OEM prices.
Less Ideal for: Buyers who prioritize guaranteed factory fitment or long-term warranty support should consider factory-quality replacements or purchasing through a parts specialist instead.
- Integrated hub and bearing assembly simplifies replacement and reduces installation steps
- Includes ABS provision so wheel-speed sensor function is maintained
- 5-lug configuration matches common Ford Edge wheel patterns
- Marketed as meeting or exceeding factory performance standards while costing less than OEM
- Some buyers reported fitment mismatches with studs or flange that required returning the part
- Lower-cost aftermarket tolerances can vary, increasing likelihood of additional adjustment or local parts needed
Verdict A cost-effective, preassembled hub/bearing for Ford Edge owners who need an affordable repair but must double-check fitment before installation.
5. A-Premium Front Steering Knuckle and Wheel Bearing Hub Assembly (Left & Right) for Ford Edge 2007–2010
| Vehicle Fitment | Ford Edge 2007-2010 V6 3.5L |
|---|---|
| Position | Front left and right |
| Material | Steel |
| Loaded Knuckle | Hub and bearing included |
This loaded steering knuckle kit replaces both front left and right assemblies on Ford Edge 2007–2010 and comes with the hub and bearing preinstalled to simplify replacement. It is intended for owners who want to avoid pressing bearings by offering a ready-to-fit assembly that installs into the suspension like the factory piece. The parts are steel construction and the listing notes performance testing and factory-spec fitment references for direct replacement. In practice this speeds repairs, reduces labor when swapping a bad bearing, and addresses symptoms like wheel vibration, pulling, or uneven tire wear without needing specialized press tools. Some buyers report long-term durability while others have experienced early failures, so quality can vary between units. Also this kit does not include axle shafts and you should verify the referenced part numbers against your vehicle before ordering. For a risk-averse buyer this is a practical way to restore front hub performance while avoiding the extra steps of bearing removal and installation.
Best for: A risk-averse mainstream buyer who values straightforward, factory-style replacements and wants to avoid bearing-press work when repairing a Ford Edge's front hub assemblies.
Less Ideal for: Shoppers looking for a long-term performance upgrade, custom suspension work, or a solution that replaces axle components should consider other options.
- Comes as a loaded knuckle with hub and bearing preinstalled, eliminating the need for a press
- Manufactured from steel and sold as brand-new assemblies for direct replacement
- Targets common failure symptoms such as wheel vibration, pulling, and uneven tire wear
- Includes both driver and passenger side pieces so both fronts can be replaced at once
- Mixed long-term reliability reported by some users suggesting inconsistent quality control
- Does not include axle shafts so additional parts may be needed for a complete repair
Verdict A practical, ready-to-install replacement that removes the need to press bearings, but watch for variable long-term durability.
6. Detroit Axle Rear Wheel Bearing Hub Assembly (fits Ford Edge 2011–2014)
| Position fit | Rear left or right |
|---|---|
| Lugs | 5 bolts |
| ABS type | Encoder |
| Bearing type | Roller Bearing |
| Material | Alloy Steel |
This Detroit Axle rear wheel bearing hub assembly is a factory-replacement style unit that installs at the rear left or right of a 2011–2014 Ford Edge. It arrives as a one-piece hub and bearing with a built-in ABS encoder, so it replaces the worn hub and speed-sensor interface in a single job. Typical use is a brake- or noise-related rear bearing failure or replacing a hub during wheel bearing service; the unit is greased and tested for impact and wear before shipping. In practice you get a correct-fit aftermarket hub that simplifies installation compared with pressing in a separate bearing, and many owners report straightforward swaps with no noises and restored wheel-speed sensor function. Limitations to note are occasional quality-control outliers and the fact the kit does not include mounting bolts, so you may need to source hardware separately. For a practical owner who wants a solid, cost-conscious repair that brings the Edge back to factory-like operation, this hub covers the essentials without extra complexity.
Best for: A practical optimizer who wants a budget-conscious, correct-fit replacement to return a 2011–2014 Ford Edge to reliable operation without aftermarket frills.
Less Ideal for: Drivers seeking premium OEM-branded components or professional shops that prefer to supply matched hardware and pins as part of a full service package may prefer other options.
- Built as a one-piece hub and bearing for straightforward replacement of the Ford Edge rear hub
- Includes integrated ABS encoder to restore wheel-speed sensor function without separate parts
- Grease-packed and tested for impact, wear, and fatigue to help durability
- Fits either rear left or right position and matches the Edge lug and flange pattern
- Does not include mounting bolts or fasteners needed for installation
- Some users report occasional fitment or manufacturing variances requiring inspection before installation
Verdict A cost-effective, correct-fit rear hub assembly for the 2011–2014 Ford Edge that restores ABS function but requires you to source mounting bolts separately.
7. PAROD Wheel Hub & Bearing Assembly 513275
| Bearing Number | 513275 |
|---|---|
| Bearing Type | Ball Bearing |
| Compatible Lubricant | Grease |
| Manufacturer | PAROD |
This PAROD wheel hub and bearing assembly replaces the hub on compatible Ford Edge and other listed Ford/Lincoln vehicles, restoring proper wheel rotation and support. It arrives as a complete hub/bearing unit ready for installation, so it is typically used when the original hub shows play, noise, or ABS sensor issues. The listing emphasizes OEM-quality construction, ball-bearing internals, and grease-compatible lubrication, which together suggest durable, road-ready performance for everyday driving. Buyers will appreciate that the part is sold as a tested assembly, which reduces installation time compared with pressing in a separate bearing. Some owners report straightforward fitment and reliable operation, though removing a seized original hub can be difficult and may require specialty tools or a professional press. There is also some variability in vehicle-specific fit notes, so double-checking fitment before installation is important. For balanced buyers who want a ready-to-install replacement that aims for factory-level function, this hub assembly is a practical choice with good value, provided you account for the potential difficulty of removing the old hub.
Best for: A balanced all-round buyer who wants a ready-to-install, factory-quality replacement for a worn wheel hub on their Ford Edge and values reliability and straightforward installation when the old hub is removable.
Less Ideal for: Drivers planning a DIY job without access to a press or removal tools or those who have not confirmed exact year/model compatibility should consider professional installation or an exact-fit alternative.
- Sold as a complete hub and bearing assembly for faster installation compared with separate bearings
- Manufactured to meet factory-quality standards with ball-bearing design
- Grease-compatible bearing reduces maintenance concerns during normal use
- Multiple customer reports of correct fit and reliable operation on listed Ford/Lincoln models
- Installing can be difficult if the original hub is seized and may require presses or professional help
- Fitment details vary by model year so incorrect selection is possible without careful checking
Verdict A practical, factory-quality hub assembly that delivers a ready-to-install replacement for compatible Ford Edge models but may require professional help to remove a stuck original hub.
Choosing the Right Ford Edge Wheel Hub Assembly: Key Factors to Consider
Fitment and Vehicle-Specific Compatibility
Accurate fitment is fundamental because the hub must match the Ford Edge's spindle or knuckle mounting pattern and spline count to seat correctly and prevent play. Incorrect fitment can cause wheel misalignment, uneven tire wear, and compromised braking geometry. Verify bolt pattern, flange dimensions, and whether the assembly is intended for front or rear application, since fitment differs between axles.
Manufacturers sometimes list multiple vehicle families; for the Ford Edge you should confirm the part references the correct model year and drivetrain configuration. A hub that requires modification or additional adapters increases installation time and risk, so favor assemblies with explicit fitment confirmation for the Ford Edge.
Bearing Type and Durability
The integrated bearing inside the hub determines load capacity and lifespan. Sealed, pre-assembled bearings reduce contamination risk and simplify replacement compared with loose-bearing rebuilds. Consider the bearing design, preload specification, and whether the unit uses tapered or angular contact bearings if applicable to the hub design.
Durability relates to material quality, heat treatment of bearing races, and sealing effectiveness against water and grit. For the Ford Edge, choose assemblies that emphasize robust seals and corrosion-resistant components to withstand varied driving conditions and maintain consistent bearing preload over time.
Noise, Vibration, and Harshness Characteristics
Wheel hub assemblies have a direct effect on NVH because worn or low-quality bearings produce rumble, grinding, or humming that changes with vehicle speed. A tightly manufactured hub with precise tolerances and effective seals tends to run quieter and reduces vibration transmitted through the steering and suspension.
When assessing options, look for design notes about noise-reduction features and manufacturing tolerances. For routine driving on the Ford Edge, prioritize assemblies that minimize bearing play and dampen resonance to preserve steering feel and passenger comfort.
Corrosion Resistance and Materials
Exposure to road salt, moisture, and debris can accelerate corrosion at the hub flange and bearing races, leading to difficult removal or premature failure. Hubs made from treated steel or with protective coatings resist rust formation and maintain structural integrity.
Cold-formed or forged components often offer better fatigue resistance than stamped parts. Consider assemblies that specify corrosion-resistant finishes or plated fastener interfaces. Good material choices reduce long-term maintenance and help ensure the hub remains serviceable on the Ford Edge.
Included Hardware and Seal Quality
Some hub assemblies include wheel studs, retaining nuts, or ABS tone rings while others require reusing existing components. Including necessary hardware reduces the risk of missing parts during a replacement and simplifies installation. The quality of seals supplied with the hub is equally important because poor seals allow contaminants to reach the bearing.
Confirm whether the assembly is sold as a complete kit or a hub-only unit. For a straightforward Ford Edge replacement, an assembly that bundles studs and seals reduces variables during installation and lowers the chance of early bearing contamination.
Installation Considerations and Torque Specs
Ease of installation affects labor time and the likelihood of a correct repair. Clear mounting surfaces, correct hole alignment, and availability of torque specifications for axle nut and mounting bolts help ensure the hub is installed to manufacturer-recommended settings. Incorrect torque can lead to bearing preload errors or fastener loosening.
Plan for necessary tools and procedures such as proper torque wrenches, bearing preload checks if applicable, and any hub press steps. For the Ford Edge, confirm torque specs and whether the hub requires a specific tightening sequence to avoid common installation mistakes.
FAQ
What are common symptoms of a failing wheel hub assembly on a Ford Edge?
Common signs often include humming or grinding noises that change with vehicle speed, vibration in the steering wheel, and uneven tire wear. You may also notice play in the wheel when lifted and checked by hand. Symptoms usually develop gradually and may worsen with longer drives or when turning.
Can I replace a Ford Edge wheel hub assembly myself?
Many owners with basic mechanical skills can perform the replacement using standard tools, but it usually requires removing the wheel and brake components and following proper torque procedures. Safety, correct tool use, and adherence to torque specs are important. If you are unsure about bearing preload or press-fit steps, consult a technician.
How long do wheel hub assemblies typically last on a Ford Edge?
Lifespan varies with driving conditions, climate, and maintenance, but assemblies with sealed bearings often last many years under normal driving. Exposure to water, road salt, or heavy loads tends to shorten life. Regular inspection helps catch early signs of wear before failure.
Is it okay to reuse the old wheel studs or seals when installing a new hub assembly?
Reusing hardware may be possible if components are in good condition, but new assemblies that include fresh studs and seals reduce the risk of future issues. Damaged or corroded studs and worn seals should be replaced to ensure reliable mounting and to protect the bearing from contamination.
Will a noisy wheel hub assembly affect vehicle safety?
Noise itself is a symptom rather than a cause, but the underlying bearing wear can affect wheel retention, steering stability, and braking performance if left unaddressed. Addressing the issue promptly reduces the chance of further damage and maintains safe handling.
How We Chose the Best Ford Edge Wheel Hub Assembly
We focused exclusively on wheel hub assemblies that are appropriate for the Ford Edge and evaluated each option across multiple, vehicle-specific performance dimensions. Key criteria included bearing durability under typical highway and city driving, hub fitment accuracy and mounting integrity, noise and vibration characteristics related to bearing operation, corrosion-resistant materials and finishes for longevity, and ease of installation focusing on common repair workflows for the Ford Edge. We also considered whether assemblies include necessary hardware and seals to reduce installation uncertainty. Products were excluded if fitment information did not explicitly cover the Ford Edge, if assemblies lacked sealed-bearing construction, or if technical specs did not provide torque guidance or mounting details. The resulting list favors units that balance long-term reliability, quiet operation, and predictable installation for Ford Edge owners and technicians.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a wheel hub assembly for a Ford Edge, prioritize correct fitment, bearing durability, and seal quality. These factors most directly influence noise, handling, and long-term service life. Balance ease of installation and included hardware against material and corrosion protection to minimize future maintenance. Expect tradeoffs between convenience and specific material treatments. Focusing on assemblies that explicitly match the Ford Edge, provide clear torque guidance, and emphasize sealed bearing construction will deliver the most predictable results.
Explore More:
- Check out all Ford Edge parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
