Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Replacing a wheel hub assembly on your Ford Fusion can restore stable steering, reduce noise, and extend the life of surrounding suspension components. Picking the right hub matters because fitment, bearing quality, and ease of installation all affect road feel and long-term reliability. This guide highlights seven shortlisted wheel hub assemblies chosen for their relevance to common Fusion model years and driving conditions. Below you will find the criteria we used to evaluate each option and a concise list of the top picks to help you decide which hub assembly suits your needs.
Looking for other parts? See all Ford Fusion parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Detroit Axle Front Wheel Bearing Hub Assembly (pair) |  |
| Most Popular A crowd favorite that many people choose with confidence | Detroit Axle Front Wheel Bearing Hub Assembly (512498) for Ford Fusion / Lincoln MKZ |  |
| Best Quality Built to a higher standard if you want something more solid | Youxmoto Front Steering Knuckle Wheel Hub Bearing Assembly (2-pack) for Ford Fusion/Mercury Milan/Lincoln MKZ |  |
| Best Budget The cheapest option that still gets the job done reliably | Autoround Rear Wheel Bearing and Hub Assembly for Ford Fusion (Rear, 5-Lug) |  |
| Most Sold A high-volume bestseller chosen again and again | A-Premium Front Wheel Bearing and Hub Assembly (5-Lug) for Ford Fusion & Lincoln MKZ |  |
| Best Value for Money The sweet spot between price and what you get | SEHNSUCHT Front Left Steering Knuckle with Loaded Wheel Bearing Hub Assembly |  |
| Best Overall The best all-around choice for most situations | TRQ Wheel Bearing and Hub Assembly Set, 2-Piece |  |
1. Detroit Axle Front Wheel Bearing Hub Assembly (pair)
| Bearing Number | 513394 |
|---|---|
| Material | Alloy Steel |
| Bearing Type | Ball Bearing |
| Specification Met | ISO 16949 |
| ABS Type | Magnetic ABS Encoder Seal |
These Detroit Axle front wheel bearing hub assemblies replace the front left and right hubs on compatible Ford Fusion models. They come as a two-piece kit and include a magnetic ABS encoder seal for integration with the vehicle speed/ABS system. Typical installation replaces worn or noisy hubs to restore wheel alignment, remove rumble or play, and return a solid, quiet ride. The hubs are alloy steel with ball bearings preinstalled and are supplied with grease compatibility for standard service. Buyers will appreciate the included ABS encoder type and the fact the kit covers both sides so you can swap hubs at once. Installation requires basic hub removal tools and often e-torx sockets and an impact for stubborn fasteners, as noted by other owners. These are aftermarket factory-quality replacements aimed at budget-conscious repairs; they perform well when installed correctly but still require proper torqueing and occasional professional assistance if you lack the right tools. Expect the same fit-and-function as a factory replacement when matched to the correct Fusion year and configuration.
Best for: Ford Fusion owners needing to replace noisy, loose, or failed front wheel hubs who want a matched pair for a complete repair.
Less Ideal for: Drivers without access to specialty tools or mechanical experience who prefer dealer-installed factory service should consider having these fitted by a professional.
- Sold as a matched pair to replace both front hubs at once
- Magnetic ABS encoder seal included for direct ABS sensor compatibility
- Alloy steel construction with preinstalled ball bearings for ready installation
- Compatible with standard grease and meets ISO 16949 specification
- Installation can require specialty tools such as e-torx drivers and a heavy-duty impact
- Not a direct statement of lifetime performance beyond testing claims
Verdict A budget-friendly, factory-quality pair of front hub assemblies for Ford Fusion owners who want a complete front-end hub replacement with ABS compatibility.
2. Detroit Axle Front Wheel Bearing Hub Assembly (512498) for Ford Fusion / Lincoln MKZ
| Position | Front |
|---|---|
| Lugs | 5 Bolt |
| ABS on Hub | Yes |
| Item model number | 512498 |
This Detroit Axle front wheel bearing and hub assembly is a direct replacement intended for the front of select Ford Fusion and Lincoln MKZ models. It arrives as a complete hub with integrated bearing and ABS tone ring so you can remove the old unit and bolt the new assembly in place rather than pressing a separate bearing. Typical use is a repair for axle noise, play, or ABS issues caused by a failed hub bearing. The listing notes impact, wear, and fatigue testing and the part matches the vehicle fitment listed for 2013 through 2020 Fusion and 2013 through 2016 MKZ applications. Practical benefits include reduced installation time compared with replacing just the bearing, a factory-style fit, and an included ABS provision. Limitations to expect are the need for proper torque procedure during installation, occasional packaging or connector damage in transit reported by some buyers, and the normal lifespan difference versus a new OEM hub depending on driving conditions.
Best for: Owners of the specified Ford Fusion or Lincoln MKZ who need a front hub replacement to eliminate bearing noise, restore wheel stability, or fix ABS sensor issues. It suits DIY mechanics and independent shops wanting a ready-to-install assembly.
Less Ideal for: Drivers who prefer purchasing directly from a dealership or who require factory-certified parts and documentation should consider dealer-sourced factory replacements instead. Those without basic mechanical skills or tools should seek professional installation.
- Complete hub with integrated bearing simplifies replacement compared with pressing a separate bearing
- Includes ABS tone ring so wheel speed sensor compatibility is maintained
- Sold specifically to fit listed Ford Fusion and Lincoln MKZ model years to reduce fitment guesswork
- Undergoes impact, wear, and fatigue testing per product notes
- Some customers reported poor packaging or damage to sensor connectors during shipping
- Installation still requires correct torqueing and basic tools; press work may be needed if removing old hub from rotor
- 10-year warranty referenced in listing but warranty details are not provided in the product specs here
Verdict A convenient, vehicle-specific front hub assembly for Ford Fusion and Lincoln MKZ owners who want a ready-to-install replacement to stop bearing noise and restore wheel function.
3. Youxmoto Front Steering Knuckle Wheel Hub Bearing Assembly (2-pack) for Ford Fusion/Mercury Milan/Lincoln MKZ
| Brand | Youxmoto |
|---|---|
| Model | YXSTK017YXT |
| Fitment | Front left and right for Ford Fusion 2006-2012, Lincoln MKZ 2007-2012, Mercury Milan 2006-2011 |
| Replace Number | 698-408, 698-409, LK011, LK012, 3M8Z-1215-A, 6E5Z-1104-AB |
This two-piece front steering knuckle and wheel hub bearing assembly set replaces the factory front hubs on compatible Ford Fusion, Mercury Milan, Lincoln MKZ and Zephyr model years. It installs in the front left and right positions and is intended to fix symptoms like grinding, wheel play, uneven tire wear, and vibration by restoring the hub, bearing, and knuckle as a single unit. The assemblies come with a protective coating to resist surface corrosion and are marketed as precise fit replacements for the listed part numbers so you can swap them in without modifying suspension components. In practice these will speed up a front-end repair because the bearing and knuckle arrive preassembled, reducing press-fit work. Some buyers report solid fit and feel, while a few report premature noise on longer-term use, so longevity may vary with driving conditions and installation. Expect a straightforward mechanical replacement that gets a Fusion back on the road quickly but monitor for unusual noise during the first few hundred miles after installation.
Best for: Owners or mechanics working on a Ford Fusion, Mercury Milan, Lincoln MKZ or Zephyr who need a direct-fit replacement for failing front hubs and want a quicker install than pressing bearings separately.
Less Ideal for: Drivers who prefer factory dealer parts or who need a hub with an extended proven service history should consider alternatives from established OEM suppliers.
- Sold as a matched left and right set for front axle repairs
- Preassembled hub, bearing, and knuckle to simplify installation and cut shop time
- Protective coating to help resist rust and corrosion
- Listed to replace common OEM part numbers for direct fit on specified models
- Some user reports of premature noise or failure under heavy use
- Heavier than a single unit which may require two-person handling during installation
Verdict A convenient preassembled front hub and knuckle pair that simplifies Fusion front-end repairs, though long-term durability may vary by use.
4. Autoround Rear Wheel Bearing and Hub Assembly for Ford Fusion (Rear, 5-Lug)
| Position | Rear |
|---|---|
| Lug Count | 5 Lugs |
| Fitment | Compatible with select 2014–2020 Ford Fusion FWD (see part reference) |
This Autoround rear wheel bearing and hub assembly replaces the factory rear hub on compatible Ford Fusion FWD models and installs as a single bolt-on unit. It is intended for rear left or right positions and includes a sealed bearing and ABS tone ring so you can restore wheel alignment and braking sensor operation without pressing in a separate bearing. In everyday use it functions like a direct factory-replacement hub: bolt it to the knuckle, attach the wheel, and the vehicle regains proper wheel guidance and reduced vibration relative to a worn hub. Notable features include a corrosion-resistant coating on the wheel bolts, a sealed design to keep grease in and contamination out, and compatibility referenced to common part numbers for Fusion rear hubs. Practical benefits are straightforward installation for mechanics familiar with hub swaps and quieter operation compared with a failing bearing. Limitations to expect are occasional fitment inconsistencies across model years and the need to verify the exact Fusion VIN or part number before ordering since one review reported an incorrect fit for a 2014 Fusion. The unit is sold as a single hub assembly for one side.
Best for: Ford Fusion owners who need an affordable, direct-replacement rear hub to fix noise, vibration, or ABS sensor issues and who will verify fitment before ordering.
Less Ideal for: Drivers who prefer dealer-sourced factory parts or who need a guaranteed exact-match hub without pre-purchase verification should consider alternatives.
- Sealed bearing design keeps grease in and contamination out
- Includes ABS tone ring for sensor compatibility
- Corrosion-resistant coating on wheel bolts to ease installation and removal
- Sold as a complete bolt-on hub assembly for faster replacement
- Fitment can be inconsistent across model years so verification is required
- Sold as one hub so you must purchase a second unit for both rear wheels if needed
Verdict A budget-friendly, sealed rear hub assembly that restores wheel guidance and ABS function on compatible Ford Fusion models but double-check fitment before buying.
5. A-Premium Front Wheel Bearing and Hub Assembly (5-Lug) for Ford Fusion & Lincoln MKZ
| Bearing Number | HA590481 |
|---|---|
| Material | GCr15 Steel, 65Mn Steel |
| Bearing Type | Ball Bearing |
| Wheel Stud Quantity | 5-Lug |
| Pre-Greased | Yes |
This A-Premium hub assembly replaces the wheel bearing and hub on compatible Ford Fusion and Lincoln MKZ models to eliminate noise, vibration, and grease leakage from worn hubs. It arrives pre-greased with a ball bearing design and five wheel studs, so installation involves swapping the old hub for this complete unit without having to pack bearings. The assembly uses hardened steel components and includes a new axle spline, bearing cage, and seals to restore factory-style fit and function. For typical use it corrects grinding or humming at the wheel, removes play that causes steering vibration, and allows a worn rotor and wheel to sit correctly again. Expect straightforward, mechanic- or DIY-friendly installation where access and rusted fasteners permit. Limitations are that this unit does not include a speed sensor and fitment is specific to certain model years and axle positions, so confirm exact vehicle and side before purchase.
Best for: Ford Fusion owners (and Lincoln MKZ owners doing Fusion-based repairs) who need a direct, complete hub-and-bearing replacement to stop wheel noise and vibration on specified model years.
Less Ideal for: Drivers who need an ABS speed-sensor integrated assembly or those repairing other vehicle models beyond the listed Fusion and MKZ years should look for a part specific to their application.
- Complete hub-and-bearing unit arrives pre-greased for simpler installation
- Five-stud hub and flange match factory wheel mounting for direct replacement
- Includes new sealing components and axle spline to address grease leaks and wear
- Hardened steel construction intended to handle axial and radial loads typical for daily driving
- Does not include a wheel speed sensor so additional parts may be required for ABS-equipped positions
- Fitment is limited to specific model years and axle positions so cross-check vehicle application before ordering
Verdict A budget-friendly complete hub assembly that restores fit and quiet operation on specified Ford Fusion and Lincoln MKZ models, but confirm side and year and note it lacks a speed sensor.
6. SEHNSUCHT Front Left Steering Knuckle with Loaded Wheel Bearing Hub Assembly
| Fitment | Ford Fusion 2006–2012 |
|---|---|
| Position | Front Left driver side |
| Bearing Type | Ball Bearing |
| Material | Alloy Steel |
This SEHNSUCHT front left steering knuckle arrives as a loaded assembly with the wheel hub and ball bearing preinstalled to replace the factory driver-side knuckle on Ford Fusion 2006–2012 models. It is intended as a direct, bolt-on replacement to address symptoms like hard braking, steering difficulty, uneven tire wear, or abnormal shaking. The alloy steel construction and a protective coating aim to resist rust and extend service life, while the preassembled hub and greased bearing remove the need to press bearings in during installation. Typical use is a suspension or wheel-end repair where the knuckle or hub bearing has failed or when upgrading a worn part; installation is described as straightforward and requires standard tools. The main limitations are that fitment is limited to the specified Fusion years so confirm model fit before ordering, and long-term durability depends on installation and driving conditions since aftermarket assemblies can vary from factory-quality parts. For a Fusion owner looking for a ready-to-install replacement, this one minimizes labor on bearing installation but expect variation from OEM fit and finish across batches.
Best for: Ford Fusion owners (2006–2012) who need a driver-side knuckle and prefer a ready-to-install hub-bearing assembly to reduce labor time.
Less Ideal for: Owners who require an exact factory-original part or broader multi-vehicle compatibility should consider alternatives from factory-quality suppliers or dealer parts.
- Comes preassembled with hub and ball bearing to avoid bearing press work
- Alloy steel construction with protective coating for corrosion resistance
- Bolt-on design intended for straightforward installation with common tools
- Listed fitment specifically covers Ford Fusion 2006–2012 driver side
- Fitment limited to specified model years so not usable on other vehicles
- Long-term reliability can vary compared with factory replacement depending on batch
Verdict If you need a low-effort, ready-to-install driver-side knuckle and hub for a 2006–2012 Ford Fusion, this assembly offers good value though it may not match factory parts exactly.
7. TRQ Wheel Bearing and Hub Assembly Set, 2-Piece
| Brand | TRQ |
|---|---|
| Material | Alloy Steel |
| Bearing Type | Ball Bearing |
| Specification Met | ISO 16949 |
| Quantity | 2 Piece |
This TRQ two-piece wheel bearing and hub assembly kit supplies a driver and passenger side hub preassembled to replace worn units on compatible Ford Fusion models. It is used when bearings make noise, generate vibration, or cause ABS warnings, and the assemblies are intended to bolt into the stock knuckle with no machining required. Notable features include ball-type bearings, a machined exterior, and grease-compatible lubrication; the set is sold specifically with the reference numbers 512498, BR930913, and HA590481 to match factory replacements. The practical benefits are straightforward: direct-fit components speed up a DIY or shop installation, reduce road noise and vibration compared with failing hubs, and restore wheel stability and ABS sensor engagement when fitment is correct. Limitations to consider are variable quality control reported by some users and that longevity depends on installation, hub mating surfaces, and vehicle use; a small number of buyers reported missing hardware or fitment issues, so inspect parts on arrival and follow torque and sensor recalibration procedures during installation.
Best for: Ford Fusion owners doing a front or AWD rear hub replacement who want a direct-fit, ready-to-install pair for a DIY job or routine shop service.
Less Ideal for: Drivers seeking a premium lifetime hub solution for heavy towing, track use, or unusually high-mileage duty should consider higher-end or OEM-sourced alternatives.
- Sold as a matched pair covering driver and passenger sides for a complete axle service.
- Preassembled hub units simplify installation and eliminate pressing bearings separately.
- Ball-bearing design and machined exterior aim to reduce noise and vibration.
- Listed to meet ISO 16949 specification for manufacturing process controls.
- Some buyers reported missing or damaged parts on arrival requiring inspection or replacement.
- Quality control appears inconsistent across batches based on user reports.
- Not a guaranteed long-term high-performance option for heavy-duty or high-mileage use.
Verdict A convenient direct-fit pair that restores quiet operation and wheel stability on compatible Ford Fusion models but inspect incoming parts due to occasional quality issues.
Choosing the Right Ford Fusion Wheel Hub Assembly: Key Factors to Consider
Fitment and Vehicle Specificity
Correct fitment ensures bolt patterns, spline counts, and ABS sensor provisions match your Ford Fusion. Mismatched fitment can lead to poor wheel alignment, premature wear, and safety issues. Verify vehicle year, engine, and axle side specifications before selecting a hub assembly.
Bearing Quality and Sealing
High-quality bearings and robust seals resist water and debris intrusion and reduce noise over time. Better bearings typically use precision manufacturing and hardened races for longer life. Effective seals help prevent contamination that leads to early failure.
Assembly Type and Installation Ease
Some hubs come as complete bolt-on assemblies while others require pressing bearings into place. Complete assemblies reduce installation time and the need for specialized tools. Consider whether you will do the work yourself or have a shop handle installation.
Durability and Corrosion Resistance
Materials and protective coatings influence how well the hub resists rust and pitting in wet or salted roads. Durable construction maintains proper tolerances under load and helps preserve wheel alignment. Look for corrosion-resistant finishes and solid machined surfaces.
ABS and Sensor Compatibility
If your Fusion has ABS, the hub must accommodate the ABS tone ring or sensor interface correctly. Improper ABS fit can trigger warning lights or uneven braking behavior. Confirm the hub supports any required electronic or mechanical sensor features.
Load Rating and Performance Expectations
Different hub assemblies are designed to handle varying loads based on driving style and vehicle configuration. Choose a hub that meets or exceeds the load demands of the Fusion to avoid premature wear. Consider heavier duty options if you tow or regularly carry heavy loads.
FAQ
How do I know when a Ford Fusion wheel hub assembly needs replacing?
Common signs include a growling or humming noise from the wheel area that changes with speed, noticeable play or wobble in the wheel, uneven tire wear, or an ABS warning light if the hub includes the sensor. Symptoms often worsen over time, so diagnosing early can prevent additional suspension or brake damage.
Can I replace a hub assembly myself or should I use a professional mechanic?
Replacement can be a DIY task if you have basic mechanical skills and access to the right tools, such as torque wrenches and possibly a press for non-assembled units. Complete bolt-on assemblies are easier for home mechanics. If you are uncomfortable with suspension work, wheel bearing preload, or ABS sensor handling, professional installation reduces risk.
Is it better to replace a single hub or both sides at once?
Replacing both sides at once is often recommended when wear is significant or when mileage is high, because bearings on the opposite side may be close to failure. However, if only one side shows clear symptoms and the other looks and feels normal, you can replace just the failing unit while monitoring the other.
What maintenance helps extend the life of a wheel hub assembly?
Keeping wheel bearings properly sealed and avoiding excessive exposure to water and road salt reduces failure risk. Regularly inspecting axle nuts, wheel studs, and seals during routine service helps catch issues early. Addressing suspension problems promptly also prevents added stress on the hub.
Will a new hub assembly fix ABS faults?
A properly fitted hub assembly that includes the correct ABS tone ring and sensor interface can resolve ABS faults caused by damaged or misaligned hub components. If the ABS fault stems from wiring or the control module, replacing the hub alone may not clear the warning.
How long should a typical wheel hub assembly last on a Ford Fusion?
Lifespan varies with driving conditions, maintenance, and build quality, but many properly installed hub assemblies last tens of thousands of miles. Harsh environments, frequent heavy loads, or contaminated bearings can shorten service life. Regular inspections help estimate remaining life before failure.
How We Chose the Best Ford Fusion Wheel Hub Assembly
We focused on criteria that directly impact real-world performance and long-term reliability for Ford Fusion wheel hub assemblies. Fitment accuracy was a primary filter to ensure bolt pattern, spline, and mounting surfaces match common Fusion model specifications. Bearing quality and sealing were evaluated to identify units likely to resist contamination and wear under typical road conditions. Durability and materials looked at metal grades and protective finishes to assess corrosion resistance. Ease of installation considered whether assemblies arrive as complete units ready for bolt-on replacement and how often special tools are required. Finally, noise and vibration characteristics were considered based on design features that reduce rumble and wheel play. We excluded remanufactured or heavily modified units that do not restore factory geometry and any parts that lacked verifiable technical specifications. The result is a list focused on properly fitting, durable assemblies that minimize installation complexity and long-term maintenance.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Ford Fusion wheel hub assembly, prioritize accurate fitment, bearing quality, and whether the unit comes as a complete bolt-on assembly. Those factors most directly affect handling, noise, and the complexity of installation. Balance durability and sensor compatibility against installation needs, and consider replacing both sides if one unit shows advanced wear to maintain consistent performance.
Explore More:
- Check out all Ford Fusion parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
