Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Acura TSX is showing vibration, noise, or instability while driving, the wheel hub assembly is often a common source. Choosing the right hub assembly matters because it affects steering precision, wheel alignment stability, and long-term bearing life. This guide highlights seven shortlisted Acura TSX wheel hub assemblies that met our fitment and durability criteria. We evaluated each option for bearing quality, fit accuracy, and expected lifespan to help you narrow down choices quickly. Read on for a concise breakdown of what to look for and why these picks made the list.
Looking for other parts? See all Acura TSX parts & accessories.
Top Picks at a Glance
1. Detroit Axle Rear Wheel Hub and Bearing Assembly (pair) — 5-Lug with Integrated ABS
| Fitment | 2004-2008 Acura TSX; 2005-2007 Honda Accord Hybrid (rear) |
|---|---|
| Lugs | 5 Bolt |
| ABS Type | Encoder |
| Bearing Number | 512327 |
This Detroit Axle kit supplies both left and right rear hub assemblies with integrated ABS encoders for a direct factory-replacement fit on the Acura TSX. It is typically used to replace noisy or worn rear bearings and restore smooth, quiet wheel rotation and reliable ABS sensing. The assemblies arrive pre-assembled so installation is mostly bolt-on and avoids pressing bearings at the bench. Detroit Axle highlights hardened bearing steel and a high-frequency quenching heat treatment that aim to improve wear and corrosion resistance for longer life. In practice buyers report straightforward installation and immediate reduction in wheel noise and vibration. Limitations are that this is a vehicle-specific rear pair only and requires the correct tools for hub removal and installation; longevity depends on driving conditions and proper installation. The inclusion of matched left/right units and an integrated ABS sensor makes this a practical, reliability-focused replacement for TSX owners dealing with bearing failure.
Best for: A reliability-focused buyer who prioritizes a dependable, factory-style rear hub replacement for an Acura TSX and prefers parts that minimize machining or pressing during installation.
Less Ideal for: Drivers looking for a front hub solution, multi-vehicle compatibility, or a truly universal part should consider different options.
- Pre-assembled hub and bearing units reduce need for bearing-press work during installation
- Integrated ABS encoder preserves wheel speed sensor function without separate parts
- Manufactured with high-frequency quenching and premium bearing steel for improved wear resistance
- Sold as a matched left/right pair so both sides can be replaced at once to maintain balance
- Fitment is limited to specific model years and axle position so it is not universal
- Installation still requires hub removal tools and mechanical skill for safe replacement
Verdict A practical, reliability-oriented matched rear hub pair with integrated ABS that restores quiet operation on compatible Acura TSX models while avoiding bench-pressing bearings.
2. TRQ Rear Wheel Bearing and Hub Assembly Set (2-piece)
| Material | Alloy Steel |
|---|---|
| Bearing Type | Ball Bearing |
| Quantity | 2 Piece |
| Fitment | 2004-2008 Acura TSX rear; 2005-2007 Honda Accord Hybrid rear |
This TRQ kit supplies both rear driver and passenger side wheel bearing and hub assemblies as a direct-fit replacement for 2004–2008 Acura TSX and 2005–2007 Honda Accord Hybrid rear applications. The pre-assembled hubs use a ball bearing design and arrive machined and greased, which speeds installation and reduces bench time for a DIYer or independent shop. TRQ highlights compatibility references and offers installation videos, so most technicians can swap both sides in a single job and restore wheel smoothness and stability. Customers report strong fitment and machining quality versus factory parts, though a few buyers experienced early failures, so careful break-in and verification after installation are advisable. Note that ABS sensor wiring is not included and must be transferred or sourced separately. If you want a convenient, ready-to-install rear hub pair that covers both sides, this set simplifies the repair while saving time versus chasing individual components.
Best for: Convenience-driven buyers who prioritize a fast, plug-and-play repair and prefer pre-assembled parts and online installation guidance to minimize shop time and complexity.
Less Ideal for: Buyers seeking guaranteed long-term factory-level longevity for high-mileage vehicles or those who need ABS sensors included should consider alternatives or source the missing components separately.
- Includes both rear driver and passenger hub assemblies for a single repair job
- Pre-assembled, machined units reduce installation time and eliminate pressing bearings
- Designed as direct-fit replacements for specified Acura TSX and Honda Accord Hybrid rear applications
- Manufacturer provides installation videos and fitment references to aid DIY installation
- ABS sensor harness is not included and must be reused or purchased separately
- Some buyers reported premature bearing noise or failures in a minority of units
Verdict A convenient two-piece, pre-assembled rear hub kit that simplifies rear wheel bearing replacement for the specified Acura TSX and Honda Accord Hybrid models, with the caveat that ABS hardware is not included and a few units have shown early failures.
3. A-Premium Front Left Steering Knuckle with Wheel Bearing Hub Assembly (Driver Side)
| Vehicle fitment | Acura TSX 2009-2014 |
|---|---|
| Position | Front Left (Driver Side) |
| Material | Alloy Steel |
| Bearing type | Ball Bearing |
| Hub included | Yes |
This loaded steering knuckle assembly replaces the front-left hub, bearing, spindle and dust shield in one unit to restore steering and wheel support on affected vehicles. It is used during front suspension repair when worn bearings, wheel wobble, or pulling and steering difficulty are present. The assembly arrives pre-assembled with the hub and ball bearing installed which speeds installation and reduces the need to press bearings. The steel construction and manufacturer claim of meeting or exceeding OEM specifications aim to deliver durable, road-ready performance for performance-oriented drivers. Reviews indicate good fitment on the listed vehicles and noticeably smoother driving after installation. Expect to reuse the original axle nut or source the correct size since some kits include a wrong-size nut, and be prepared to swap cheaper included fasteners for stronger originals if you want maximum longevity. Professional tools and basic suspension experience are recommended for a correct, torque-accurate installation.
Best for: A performance-oriented buyer who prioritizes restoring precise steering response and wheel stability with a ready-to-install, factory-replacement style assembly on an Acura TSX.
Less Ideal for: Drivers who prefer to reuse only original factory parts or who lack the tools and experience for suspension work should consider professional installation or alternative repair options.
- Loaded assembly includes hub and bearing to simplify replacement and eliminate bearing pressing
- Steel construction intended to meet or exceed factory specifications for durability
- Includes dust shield and ABS ring for a more complete installation
- Widely reported to fit the specified vehicle years with consistent fitment
- Some units ship with the wrong axle nut size or lower-quality included fasteners
- May require professional tools and torque equipment for safe installation
Verdict A ready-to-install, factory-style front-left knuckle and hub assembly aimed at performance-focused owners who want a durable, plug-and-play replacement for the Acura TSX.
4. Autoround Rear Wheel Bearing and Hub Assembly 512353 for Acura TSX / Honda Accord
| Bearing Number | 512353 |
|---|---|
| Material | Alloy Steel |
| Bearing Type | Ball Bearing |
| Compatible Lubricant | Grease |
This Autoround rear wheel bearing and hub assembly is a budget-focused replacement for vehicles that use part number 512353. It arrives as a complete hub with the bearing preinstalled, so installation is a straightforward swap for the rear axle and requires standard hand and impact tools. Notable features include a five-lug flange and ABS compatibility, which keeps the vehicle's wheel-speed sensor integration intact. The manufacturer states the unit is alloy steel with factory-spec performance testing and ships ready to install with grease-compatible bearings. For everyday drivers this means a quiet, stable rear wheel after replacement and a cost-saving alternative to dealer parts. Limitations are typical of value-brand parts: long-term durability may vary compared with premium factory-quality hubs and professional installation is recommended if you lack brake and suspension experience. The product does include a one-year support option.
Best for: Practical, budget-conscious buyers looking to repair an Acura TSX or compatible Honda Accord affordably while keeping a safe, quiet rear wheel assembly.
Less Ideal for: Drivers seeking the longest possible service life or certified dealership-level parts should consider higher-end or OEM factory-quality replacements.
- Complete hub assembly with bearing preinstalled for quicker installation
- Designed to retain ABS sensor function for vehicles with ABS systems
- Five-lug fitment matches factory rear hubs for a direct replacement
- Marketed and tested to meet or exceed OEM performance standards
- Value-brand construction may not match long-term durability of higher-priced factory-quality hubs
- Limited warranty period of one year
Verdict A cost-effective, direct-fit rear hub assembly for Acura TSX/Honda Accord owners who want a quick, wallet-friendly replacement with ABS compatibility.
5. A-Premium Rear Wheel Bearing and Hub Assembly, 5-Lug Compatible with Acura TSX 2009–2014
| Vehicle fitment | Acura TSX 2009-2014 |
|---|---|
| Position | Rear left and right |
| Wheel stud quantity | 5-Lug |
| Pre-greased | Yes |
| Flange type | 4-Hole Flange |
This rear wheel bearing and hub assembly replaces the rear left and right hubs on an Acura TSX 2009–2014 to correct noise, vibration, and grease leakage from a worn unit. It arrives pre-greased and includes a ball bearing, bearing cage and seals so installation restores the hub to a factory-quality style assembly without needing additional bearing servicing. The unit uses factory-compatible wheel stud specification and a 4-hole flange to accept the original rotor and wheel hardware. Typical use is straightforward axle-end replacement during a rear hub job or when symptoms indicate bearing wear. Benefits are simple: direct fitment for the TSX, reduced installation steps thanks to pre-greasing, and a complete sealed assembly that eliminates old contamination. Limitations to note are varying long-term durability reported by some buyers and the absence of a speed sensor, so it is not a plug-and-play swap where an ABS sensor is integrated. Expect standard mechanical installation procedures and verify sensor needs before you remove the old hub.
Best for: Risk-averse mainstream buyers who prioritize a direct-fit, ready-to-install replacement for an Acura TSX 2009–2014 and want a straightforward swap with minimal additional work.
Less Ideal for: Drivers who need an integrated ABS speed-sensor hub or who prefer long-term premium aftermarket options with extended proven lifespans should consider alternatives.
- Made as a complete sealed hub assembly so no separate bearing packing is required
- Pre-greased and includes seals and bearing cage for straightforward replacement
- 5-lug, factory-compatible stud pattern and flange that fit the Acura TSX rotor and wheel hardware
- Meets OEM specifications according to the product listing
- Does not include an integrated wheel speed sensor for ABS-equipped vehicles
- Some user reports indicate inconsistent long-term durability across installs
Verdict A direct-fit, pre-greased rear hub assembly that simplifies TSX rear hub replacements but lacks an integrated speed sensor and has mixed long-term durability reports.
6. Aeagle Front Right Steering Knuckle and Wheel Bearing Hub Assembly for Acura TSX (Passenger Side)
| Fitment | Acura TSX 2009-2014 |
|---|---|
| Installation position | Front right passenger side |
| Manufacturer part number | AESTK010-Q1FR |
This Aeagle front-right steering knuckle and wheel bearing hub assembly replaces the factory steering knuckle and bearing for Acura TSX models from 2009 to 2014. It arrives as a ready-to-install unit intended to simplify repair by avoiding separate press-in bearing work. Typical use is a suspension or hub replacement when you have wheel vibration, uneven tire wear, or noisy bearings. Notable features from the listing include an anti-corrosion finish, preinstalled bearing hub, and claimed minimal noise and vibration. In practice the assembly speeds up installation and reduces the need for specialized press tools, which is useful for DIY mechanics or independent shops. Several buyer reports note good fit and easier installation compared with swapping bearings alone, but a few mention inconsistent hardware sizes and the dust shield or axle nut may not be preinstalled or correct, so confirm fasteners before installation. The product is a practical, lower-cost alternative to dealer parts that can restore wheel function quickly when matched to the specified TSX fitment.
Best for: Practical optimizers looking to fix a worn hub or knuckle on an Acura TSX without paying dealer prices, prioritizing quicker installation and lower total repair cost.
Less Ideal for: Buyers seeking a guaranteed factory-identical part with fully matched hardware or those who prefer paying a dealer for full verified fitment and installation support should consider alternatives.
- Direct-replacement design for Acura TSX 2009–2014 simplifies fitment
- Integrated wheel bearing hub reduces the need for bearing press work
- Anti-corrosion finish helps extend service life in road conditions
- Designed to minimize noise and vibration after installation
- Hardware may not match factory fastener sizes and some buyers reused original nuts
- Dust shield and certain small components may not come preinstalled
- Reported occasional quality inconsistency such as premature ball joint failure
Verdict A cost-effective, ready-to-install hub and knuckle for Acura TSX owners who want a faster repair than pressing bearings, but check and prepare hardware before fitting.
7. Aeagle Front Left Steering Knuckle with Wheel Bearing Hub Assembly (Driver Side)
| Brand | Aeagle |
|---|---|
| Installation position | Front left driver side |
| Compatible models | Acura TSX 2009-2014; Honda Accord 2008-2012 |
| Manufacturer Part Number | AESTK011-Q1FL |
This Aeagle steering knuckle arrives as a complete front-left driver-side assembly with the wheel bearing preinstalled, so it replaces the knuckle and bearing in one job rather than pressing bearings in and out. It is intended for use when a worn or damaged knuckle is causing vibration, uneven tire wear, noise, or brake and wheel-rotation issues. Practical features called out by the manufacturer include an anti-corrosion finish and new quality components that help the part last in service environments. Buyers will appreciate the time savings during installation and the simplified fitment process compared with sourcing a separate bearing. Some customers reported minor fastener fitment differences and the need to reuse OEM nuts or cotter pins, so expect to verify bolt and nut sizes and keep original hardware handy. While the assembly streamlines replacement and reduces shop time, careful pre-checking of fasteners and following vehicle fitment are important to avoid installation hassles.
Best for: Balanced all-round buyers who want a practical, time-saving factory-replacement style part that simplifies front-left steering knuckle and bearing repairs on an Acura TSX 2009–2014.
Less Ideal for: Buyers who need guaranteed exact-fit fasteners included or those who prefer to service only the wheel bearing instead of replacing the entire knuckle assembly should consider alternatives.
- Complete assembly with bearing preinstalled reduces labor and eliminates pressing bearings during replacement
- Anti-corrosion finish intended to extend service life in corrosive conditions
- Engineered as a direct-replacement for specified Acura TSX years to restore steering and wheel function
- Saves time compared with buying knuckle and bearing separately
- Some customers reported incorrect or mismatched fasteners supplied, requiring reuse of OEM nuts or sourcing correct sizes
- Ball joint quality may vary between units which could require inspection before installation
Verdict A time-saving, complete front-left knuckle and hub assembly for Acura TSX owners who prefer replacing the whole unit to avoid bearing press work, but check fasteners before installation.
Choosing the Right Acura TSX Wheel Hub Assembly: Key Factors to Consider
Fitment Accuracy
Correct fitment is the foundation of a trouble-free wheel hub installation. An assembly that matches the Acura TSX mounting pattern, bolt spacing, and wheel stud configuration reduces the chance of installation complications and uneven wheel runout.
Precise fit affects alignment and steering feel. Components with clear vehicle-specific fitment data and OEM-equivalent mounting dimensions typically install more easily and maintain factory tolerances. When fitment is off even slightly, you can get vibration, premature tire wear, or the need for additional modifications, so prioritize parts that list explicit compatibility with the TSX.
Bearing Quality and Load Rating
The internal bearing is the part that endures the most stress, so its material, manufacturing tolerances, and load rating matter. Higher-grade bearings resist wear and maintain smooth rotation under cornering and braking loads, which preserves steering responsiveness.
Look for assemblies that specify bearing type, dynamic load ratings, and tolerance standards. Bearings designed for automotive use will have heat-treated races and precision rollers or balls to minimize noise and extend service life. Low-quality bearings often fail prematurely and can produce grinding or rumbling sounds that signal impending replacement.
Seal Design and Contaminant Protection
Seals keep water, dirt, and road salt away from the bearing surfaces. A robust sealing system reduces the risk of contamination, which is a leading cause of bearing failure, especially in climates with heavy precipitation or salted roads.
Good seals are often double-lipped, incorporate dust shields, and use durable elastomers that maintain flexibility across temperature ranges. Assemblies with better sealing typically deliver longer, maintenance-free service life and reduce the chance of noise or roughness developing from contaminated bearings.
Wheel Stud and Mounting Hardware Integrity
Wheel studs and the hub mounting interface must be strong and accurately located to ensure consistent lug torque and wheel retention. Studs that are poorly formed or mounted on a substandard flange can stretch or fail under repeated torque cycles.
Choose assemblies that include hardened, properly sized studs or specify the use of OEM-grade hardware. Also consider the finish and corrosion resistance of studs and mounting surfaces because rust can make future removal difficult and affect torque accuracy over time.
Noise, Vibration, and Harshness (NVH) Performance
Wheel hub assemblies influence NVH characteristics felt in the cabin and steering wheel. Bearings with looser tolerances or poor preload control can introduce growl, hum, or grinding sensations at certain speeds.
Assess features that reduce NVH, such as precision bearing fits, properly balanced hub faces, and secure flange geometry. Better NVH performance improves perceived vehicle quality and driver comfort, making it an important consideration when replacing a hub assembly.
Serviceability and Documentation
Ease of installation and available technical documentation save time and reduce the risk of incorrect assembly. Clear torque specifications, torque-to-yield guidance where applicable, and step-by-step fitment notes are valuable for DIYers and professional shops alike.
Parts that include installation notes, recommended torque specs, and sealant or grease instructions reduce uncertainty during replacement. Consider whether the assembly is a direct-swap unit or requires additional bearings or hardware, because that affects labor time and complexity.
FAQ
What are common symptoms of a failing wheel hub assembly on an Acura TSX?
Common signs include a humming or grinding noise that changes with vehicle speed, vibration in the steering wheel, or uneven tire wear. You might also notice looseness at the wheel or a ABS warning light if the hub includes a tone ring.
Can I replace a wheel hub assembly myself on an Acura TSX?
Many mechanically inclined owners can replace a hub assembly with basic tools and a torque wrench, but it requires proper jacking, safe support, and following torque specs. If you are unsure about press-fit bearings or ABS sensor handling, professional installation is advisable.
How long does a wheel hub assembly typically last?
Hub life varies widely depending on driving conditions, seal quality, and bearing design. Under normal driving, a well-made assembly can last tens of thousands of miles, while exposure to water, road salt, or heavy loads can shorten service life.
Is noise always a sign the hub assembly needs replacement?
Not always. Noise can also come from tires, brakes, or suspension components. However, if the noise correlates with wheel speed and you detect roughness when rotating the wheel by hand, the hub bearing is a likely culprit and should be inspected.
Do front and rear hub assemblies differ for the Acura TSX?
Yes, front and rear assemblies can differ in bearing size, mounting orientation, and whether they integrate ABS tone rings. Always confirm the assembly is specified for the correct axle position to ensure proper fit and function.
How We Chose the Best Acura TSX Wheel Hub Assembly
We focused on parts that deliver reliable fit and long service life for the Acura TSX. Our evaluation emphasized accurate vehicle-specific fitment, bearing durability under typical driving loads, and sealing design to resist road contaminants. We also considered hub assembly stiffness and mounting bolt alignment because these affect wheel runout and steering feel, plus the quality of wheel studs to ensure consistent lug torque retention. Additional checks covered warranty terms and manufacturer technical support documentation to judge confidence in long-term performance. We excluded universal or non-vehicle-specific hubs and any parts lacking clear technical specifications or fitment data for the Acura TSX. We did not include items without documented bearing ratings or assemblies missing integral seals. The result is a shortlist of seven hub assemblies that meet the practical demands of TSX ownership while minimizing guesswork on compatibility and durability.
Our full evaluation process is outlined in our review methodology.
Conclusion
When selecting an Acura TSX wheel hub assembly, prioritize fitment accuracy, bearing quality, and seal robustness. These factors have the biggest impact on steering feel, noise, and long-term durability. Also weigh serviceability and hardware integrity because correct installation and reliable studs reduce future issues. Balancing these tradeoffs will help you choose a hub assembly that delivers consistent performance and fewer repeat replacements.
Explore More:
- Check out all Acura TSX parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
