Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a Dodge Journey and are facing slipping, leaks, or rough shifts, choosing the right transmission rebuild kit can restore drivability and extend service life. A good kit supplies the parts you need to address worn seals, gaskets, and internal components so the transmission returns to reliable operation.This guide presents five shortlisted Dodge Journey transmission rebuild kits chosen for their suitability to common Journey transmissions. We evaluated part completeness, fitment accuracy, and the quality of seals and friction components. Read on to see which kit matches the transmission type in your vehicle and what to check before you begin the rebuild.
Looking for other parts? See all Dodge Journey parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | ZDKK 62TE Transmission Master Rebuild Kit for 3.6L V6 Chrysler/Dodge |  |
| Best Quality Built to a higher standard if you want something more solid | Transparts Warehouse Transmission Master Rebuild Kit for Dodge 62TE (07-On) |  |
| Best budget The cheapest option that still gets the job done reliably | Transparts Warehouse Transmission Level 2 Rebuild Kit for Dodge/Chrysler A518 A618 46RE 47RE (1998–2002) |  |
| Highest Rated A top-rated pick with lots of positive feedback | COPACHI Transmission Master Overhaul Rebuild Kit 62TE |  |
| Best Seller A high-volume bestseller chosen again and again | Mopar 62TE 6-Speed Transmission Rebuild Kit (2007–2019 Chrysler/Dodge/Jeep) |  |
1. ZDKK 62TE Transmission Master Rebuild Kit for 3.6L V6 Chrysler/Dodge
| Manufacturer | ZDKK |
|---|---|
| Model | 62TE Transmission Master Rebuild Kit |
| Compatible Engines | 3.6L V6 |
| Compatible Years | Select models 2007–2021 |
This ZDKK 62TE Master Rebuild Kit is a full transmission overhaul kit intended to replace worn clutches, seals, and gaskets in 62TE 3.6L V6 units used in Dodge Journey and related Chrysler models. It includes high-friction clutch plates, reinforced steel discs and viton seals so the transmission can stop slipping, shuddering, or exhibiting delayed shifts when installed as part of a full rebuild. The kit is built to match factory part numbers and is supplied as a single package for technicians to install during transmission disassembly. Practical benefits include renewed shift quality and improved heat and wear resistance from upgraded seals and friction materials. Important limitations are that professional installation and precise clearance measurements are mandatory and the kit alone does not replace valve body or torque converter work unless those components are also inspected and serviced. Users must also replace fluid and filter during the rebuild.
Best for: Balanced owners who want a comprehensive, factory-spec replacement kit to restore shift quality during a full 62TE transmission rebuild and prioritize reliability over piecemeal fixes.
Less Ideal for: Drivers seeking a simple plug-and-play fix or those unwilling to pay for professional transmission service should consider alternative solutions or partial repairs.
- Complete master kit includes clutch plates, steel discs, seals, and gaskets for a full rebuild
- High-friction clutch material and reinforced discs improve resistance to wear and heat
- Viton seals offer better durability under high temperature conditions compared with standard seals
- Requires professional transmission disassembly and precise measurements for safe installation
- Does not include valve body or torque converter replacement, which may be needed in some failures
Verdict: A full, factory-spec rebuild kit that restores smooth shifting in 62TE 3.6L V6 transmissions when installed as part of a professional overhaul.
2. Transparts Warehouse Transmission Master Rebuild Kit for Dodge 62TE (07-On)
| Brand | Transparts Warehouse |
|---|---|
| Manufacturer | Transparts Warehouse |
| Manufacturer Part Number | 262006AP |
This Transparts Warehouse master rebuild kit is built to return a worn 62TE transmission to strong, reliable service by supplying the common consumables used in a full overhaul. The kit groups Alto friction clutches, steel clutches, a premium gasket set, O-rings, metal-clad seals, sealing rings, and bonded pistons so a shop or experienced DIYer can replace all wear items in one job. For a performance-oriented rebuild on Dodge Journey 62TE transmissions the included bonded pistons and quality clutches help restore firm line pressure and engagement characteristics, while the comprehensive gasket and seal set reduces the chance of post-rebuild leaks. The package is focused on parts replacement rather than remanufactured cores or calibrations, so it suits projects where internal component replacement and careful reassembly are the goal. Expect labor and tuning work still required to diagnose valve body or electronic control issues that parts alone will not fix.
Best for: Performance-oriented owners and independent shops rebuilding Dodge Journey 62TE transmissions who prioritize restoring firm engagement and durable internal components.
Less Ideal for: Casual DIYers without transmission experience or buyers seeking a remanufactured long-block transmission replacement rather than a parts-only kit.
- Comprehensive kit includes friction and steel clutches plus bonded pistons for a full internal refresh
- Premium gasket and seal set reduces likelihood of leaks after rebuild
- Clutch friction discs are made in the USA by a known supplier for consistent quality
- Supplies common wear items needed for a single complete rebuild job to save sourcing time
- Does not include remanufactured hard parts or valve body components, so additional sourcing may be required
- Requires professional-level installation and proper diagnosis to address electronic or hydraulic control faults
Verdict: A complete, quality-focused parts kit that lets shops and experienced builders perform a thorough rebuild of the Dodge 62TE transmission.
3. Transparts Warehouse Transmission Level 2 Rebuild Kit for Dodge/Chrysler A518 A618 46RE 47RE (1998–2002)
| Compatible Transmissions | A518 A618 46RE 47RE |
|---|---|
| Fitment Years | 1998-2002 |
| Includes | Alto clutches, Dacron filter, front band, bushings, gaskets, O-rings, metal-clad seals |
| Manufacturer | Transparts Warehouse |
This Transparts Warehouse level 2 rebuild kit is a budget-focused package intended to refresh a 46RE or 47RE transmission in Dodge and Chrysler vehicles from 1998–2002. The kit includes Alto friction clutches, a Dacron filter, front band, pump and extension housing bushings, gaskets, O-rings, metal-clad seals and sealing rings so you can replace worn consumables during a mid-level overhaul. In practice it covers the majority of parts a DIY mechanic or an independent shop will swap when repairing slipping clutches, leaks, or poor shift quality, and the Alto clutches are made in the USA which helps reliability. It does not include steel plates, solenoids, or any electronic components, so you may still need to source a direct clutch, snap ring, or solenoids depending on your failure. The kit is a practical value option for cost-conscious rebuilds but expect to verify clearances and buy any missing hard parts separately if your transmission has additional wear or damage.
Best for: Budget-conscious owners and independent shops doing a mid-level rebuild on a Dodge Journey with a 46RE/47RE transmission who prioritize replacing worn consumables affordably.
Less Ideal for: Owners seeking a full, drop-in remanufactured transmission or those who need electronic components and hardened steel clutch packs included should look at more complete rebuild or reman options.
- Comprehensive consumables: friction clutches, filter, gaskets, seals and bushings included for a typical mid-level rebuild.
- Alto friction clutches are US-made, supporting better durability than generic clutch packs.
- Covers common leak and wear items so a shop can refresh the transmission without replacing the entire unit.
- Suitable for DIY or independent shops familiar with transmission clearance checks and adjustments.
- Does not include steel clutch plates or solenoids so additional parts may be required for a complete rebuild.
- Kit may not address internal wear beyond consumables, requiring separate reman parts or machining if damage is present.
Verdict: A cost-effective parts kit that refreshes the consumables in 46RE/47RE Dodge transmissions but you may need extra steel parts or solenoids for a full rebuild.
4. COPACHI Transmission Master Overhaul Rebuild Kit 62TE
| Manufacturer | COPACHI |
|---|---|
| Model | Transmission Master Overhaul Rebuild Ki |
| Item model number | 62TE |
| Manufacturer Part Number | I12D0367 |
This COPACHI master overhaul rebuild kit supplies rings, seals, gaskets, and clutch plates intended to service the 62TE transmission used in Dodge vehicles. It is designed for rebuild shops or experienced DIYers tackling a transmission teardown and rebuild, providing the common wear items needed to restore sealing and clutch function. Notable features include a full complement of seals and friction components and manufacturer quality checks before shipment. In practice the kit simplifies parts sourcing by grouping most replacement items required for a rebuild around the 62TE platform, and the included parts aim to match factory fit and function for a straightforward installation when paired with correct inspection and machining. Limitations are that it does not include hardened wear parts like drums or solenoids and buyers must verify exact 62TE variant fitment before purchase; expect to supplement the kit if machining or additional replacement components are needed during a full overhaul.
Best for: Reliability-focused owners and independent technicians who prefer restoring a Dodge Journey transmission with a consolidated parts kit to ensure consistent sealing and clutch replacements during a carefully executed rebuild.
Less Ideal for: Users seeking a turnkey remanufactured transmission or those unwilling to perform inspection, machining, or source supplemental hard parts should consider a remanufactured unit instead.
- Comprehensive set of seals, gaskets, rings, and clutch plates for a 62TE rebuild
- Packed as a master kit to reduce time spent sourcing individual parts
- Manufacturer inspects items prior to shipment to help ensure parts arrive usable
- Aftermarket direct-replacement design intended to match factory fit for common wear items
- Does not include hard wear components such as drums, valve body parts, or solenoids
- Requires correct 62TE part-number verification and may need additional machining or parts for a complete overhaul
Verdict: A convenient, reliability-minded rebuild kit that consolidates the common seals and clutch components needed to restore a Dodge 62TE transmission.
5. Mopar 62TE 6-Speed Transmission Rebuild Kit (2007–2019 Chrysler/Dodge/Jeep)
| Brand | Mopar |
|---|---|
| Manufacturer Part Number | 68272623AB .9 |
| ASIN | B083ZM1SVN |
This Mopar rebuild kit provides the internal components needed to overhaul the Aisin-built 62TE 6-speed automatic transmission found in many Chrysler, Dodge, and Jeep vehicles from 2007 through 2019. It is intended for use during a transmission teardown and rebuild to replace worn clutch packs, seals, and other service parts with factory-spec replacements. The kit ships with a comprehensive set of parts from the Mopar brand which simplifies sourcing and helps ensure component compatibility with factory tolerances. For a repair shop or experienced DIYer, the kit reduces downtime by combining required pieces in one package and avoids piecing together parts from multiple vendors. Limitations are that installation requires transmission-specific tools and expertise and the kit alone does not address worn drums, shafts, or electronic components that may also need replacement, so additional parts or machining may be required for a complete rebuild.
Best for: A risk-averse mainstream buyer who prefers factory-brand parts and wants a reliable rebuild solution for a Dodge Journey with an Aisin 62TE transmission, relying on a shop or experienced technician to perform the work.
Less Ideal for: Someone looking for a complete, no-additional-parts rebuild solution or a beginner wanting a simple plug-and-play fix should consider a remanufactured transmission or professional rebuild service instead.
- Factory-brand components that match original specifications for the 62TE transmission
- Combines multiple rebuild parts in one kit to simplify ordering and reduce parts-matching errors
- Saves time for shops and skilled DIYers by consolidating common wear items into a single package
- Does not include heavy wear items like drums, shafts, or valve body components that may require separate repair
- Requires professional-level tools and transmission knowledge to install correctly
Verdict: A convenient factory-brand parts kit for rebuilding the 62TE transmission that suits risk-averse buyers who will use a professional or experienced technician for installation.
Choosing the Right Dodge Journey Transmission Rebuild Kit: Key Factors to Consider
Fitment and Compatibility
Correct fitment is the single most important factor because the Dodge Journey has specific transmission variants that require matching dimensions and part interfaces. Selecting a kit that explicitly lists compatibility with your Journey transmission model reduces the risk of receiving mismatched gaskets, seals, or valve body components.
Compatibility affects installation time and the likelihood of a successful rebuild. Incorrectly fitted parts can cause leaks, shifting problems, or premature failure. Always cross-check the kit's fitment notes against your vehicle's transmission code and build date before purchasing.
Seal and Gasket Coverage
Transmission leaks are a common failure mode, so a kit that includes a full set of seals and gaskets matters a great deal. Comprehensive seal coverage should include the pan gasket, pump seal, input/output shaft seals, and any internal O-rings that are known to wear.
High-quality seals preserve fluid pressure and prevent contamination. If a kit omits critical seals, you may need to source missing pieces separately, which increases downtime and the chance of errors during reassembly.
Friction Components and Band Material
Friction discs, clutch plates, and band linings control gear engagement and smooth shifting. The wear characteristics of these materials determine shift firmness and longevity. Kits that include full sets of friction components allow you to restore the transmission's shift quality to original specifications.
Pay attention to the type and number of plates included. Using worn or partial sets can lead to slippage and overheating, so ensure the kit supplies the correct stack height and material compatible with your Journey's transmission.
Included Hardware and Small Parts
Small components like snap rings, bushings, springs, and torque converter hub bolts are easy to overlook but essential for a complete rebuild. A kit that bundles these items helps avoid assembly delays and the risk of improvising with incorrect substitutes.
Hardware condition influences longevity and serviceability. Reusing fatigued or damaged small parts can compromise reassembly integrity and lead to early rework, so prefer kits that explicitly include critical fasteners and internal retainers.
Documentation and Installation Support
Clear, vehicle-specific installation instructions reduce the chance of errors during a rebuild. Documentation that includes torque specs, reassembly order, and diagrams for the Dodge Journey transmission layout is especially valuable for DIY mechanics or shops unfamiliar with that model.
Some kits may offer online resources or parts lists that simplify verification during teardown. Lack of guidance increases the likelihood of missed steps or incorrect clearances, which can negatively affect transmission performance after the rebuild.
Material Quality and Durability
Material selection for seals, gaskets, and friction elements affects how the transmission holds up under load and heat. Durable polymers and properly treated friction surfaces resist swelling, glazing, and rapid wear, contributing to a longer service interval after rebuild.
Consider whether the kit specifies OEM-equivalent materials or upgraded components. While higher-grade materials can offer better longevity, verify compatibility to avoid unintended interactions with the transmission fluid or mating surfaces.
How We Chose the Best Dodge Journey Transmission Rebuild Kit
We prioritized kits that supply the core components required for a full transmission refresh on the Dodge Journey. Key evaluation criteria included completeness of included seals and gaskets, coverage of wear-prone friction components, and whether the kit included critical hardware such as snap rings and bushings needed for reassembly. Fitment accuracy was assessed by how specifically the kit aligns with Dodge Journey transmission models and common internal layouts.Durability indicators were another filter, favoring kits that include upgraded or OEM-equivalent seals and friction materials. We also considered the clarity of installation documentation and whether the kit grouped components logically to reduce the chance of missing parts during rebuild.Exclusions: we did not include partial or single-component packs that omit essential seals or friction elements, nor did we include kits lacking clear fitment guidance for the Dodge Journey. We focused on full or comprehensive overhaul kits suitable for in-vehicle transmission rebuilds.
Our full evaluation process is outlined in our review methodology.
FAQ
How do I know which transmission rebuild kit fits my Dodge Journey?
Check your vehicle's transmission identification code, model year, and any casting numbers on the transmission housing. Match those details against the kit's fitment notes and parts list. If documentation lists compatible transmission codes, that is the most reliable way to confirm fitment.
Can I rebuild a Dodge Journey transmission myself?
Many mechanically skilled owners can perform a rebuild with the right tools, workspace, and documentation. It requires attention to torque specs, clearances, and correct reassembly order. If you are unsure about diagnosing internal transmission issues or lack specialized tools, professional help is often advisable.
Which components are most important to replace during a rebuild?
Prioritize seals, gaskets, friction plates, and any worn bushings or snap rings. Replacing the filter and inspecting the pump and valve body for wear are also important. Addressing these elements restores hydraulic integrity and shift quality in most rebuilds.
How long does a transmission rebuild typically take?
Rebuild time varies with experience and workspace setup but often ranges from a full day for an experienced technician to several days for a DIYer. Time is influenced by the need to source missing parts, clean components thoroughly, and perform precise measurements and clearances.
Should I replace the torque converter during a rebuild?
Replacing the torque converter is recommended if you suspect internal damage or contamination, or if the converter shows signs of wear that could compromise hydraulic pressure. It depends on inspection results and whether the cost and effort align with the overall rebuild goals.
Conclusion
Choosing the right Dodge Journey transmission rebuild kit comes down to matching fitment, ensuring full seal and gasket coverage, and replacing all wear-sensitive friction and hardware components. Prioritize kits that include clear installation guidance and quality materials to reduce the chance of rework.Balance the desire for upgraded components with strict compatibility checks. When in doubt, verify transmission codes and inspect internal parts during teardown to confirm which components truly need replacement.
Explore More:
- Check out all Dodge Journey parts & accessories
- Explore Transmission Rebuild Kits Maintenance & Repair Guides
- Explore Transmission & Drivetrain
- Browse all Auto Parts
