Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Buick Regal feels loose in corners or you hear clunks over bumps, the right sway bar link can restore steady handling and reduce noise. Choosing the correct link helps maintain alignment geometry and prevents excessive body roll, which matters for both daily driving and spirited road use. This guide highlights a short list of top-performing sway bar links for the Buick Regal, selected for correct fitment and long-term durability. Below we explain the key criteria used to evaluate these options and what to look for when selecting a replacement.
Looking for other parts? See all Buick Regal parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Metrix Premium Chassis Parts Front Sway Bar Stabilizer End Link Kit (2 pc) |  |
| Most Popular A crowd favorite that many people choose with confidence | XOPIYAO Front Stabilizer Bar End Link Kit (set of 2) |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Front and Rear Sway Bar Link Kit for Buick Regal |  |
| Best Budget The cheapest option that still gets the job done reliably | MOTOKU Front Sway Bar Link Kit for Buick Regal (2018–2020) |  |
| Most Sold A high-volume bestseller chosen again and again | X AUTOHAUX Front Suspension Kit with Inner & Outer Tie Rod Ends and Sway Bar Links |  |
| Best Value for Money The sweet spot between price and what you get | TCHENPART K750519 Front Sway Bar Link Kit |  |
| Best Overall The best all-around choice for most situations | ATRACYPART Front Sway Bar Stabilizer Link Kit, 2-Pack |  |
1. Metrix Premium Chassis Parts Front Sway Bar Stabilizer End Link Kit (2 pc)
| Position | Front |
|---|---|
| Quantity | 2x Front Stabilizer Bar Link K750660 |
| Pre-greased | Yes |
| Compatible models | Buick Regal (2014-2017) and select Chevrolet/Buick models listed |
This Metrix two-piece front stabilizer bar end link kit replaces worn or damaged front sway bar links on compatible Buick Regal models. It is supplied as a pair and arrives pre-greased to reduce initial noise and ease installation. Metrix positions these as factory-quality replacements with certification to recognized manufacturing standards, and many buyers report direct fit and corrosion-resistant finishes that hold up in winter conditions. In practice the larger nut and bolt heads mean you may need different sockets than the originals, and some installers note there are no flat wrench flats on the shaft so tight spaces can complicate removal and final torqueing. A few users saw shorter lifespans on high-mileage or harsh-road vehicles, while others extended durability by adding grease under the boots. For a reliability-focused buyer looking to restore handling and eliminate sway-bar noise on a Buick Regal, this kit offers a practical balance of fit, corrosion resistance, and value, but keep in mind it is not greaseable in-service and installation can be fiddly in cramped wheel wells.
Best for: Buyers prioritizing reliable, factory-quality suspension replacements who want a direct-fit repair to restore Buick Regal handling and reduce sway-bar noise.
Less Ideal for: Shoppers seeking a permanently serviceable or greasable link for frequent heavy-duty use should consider alternatives designed for regular maintenance or heavy-duty duty cycles.
- Sold as a matched pair for front sway bar link replacement
- Pre-greased out of the box to reduce initial binding and noise
- Corrosion-resistant machined finish that holds up in winter conditions
- Manufactured to certified quality standards that aim to exceed factory specifications
- Not serviceable or greaseable after installation
- Larger bolt and nut heads may require different sockets and can complicate installation in tight spaces
- Some reports of premature bushing wear under very harsh driving conditions
Verdict A corrosion-resistant, factory-quality replacement pair that restores Buick Regal front sway bar function but is not greaseable for long-term servicing.
2. XOPIYAO Front Stabilizer Bar End Link Kit (set of 2)
| Auto Part Position | Front |
|---|---|
| Compatible with Vehicle Type | Car |
| Material Type | Plastic |
This XOPIYAO front stabilizer bar end link kit is a direct-replacement style link set sold as two pieces for the front suspension. It connects the anti-roll bar to the control arm to reduce body roll and restore steering stability when the original plastic links wear out. Typical use is a straightforward swap during a front-end suspension service to eliminate clunks or looseness and recover crisp turn-in at moderate speeds. The listing highlights a tested build and black finish; customers report simple installation and an immediate reduction in front-end noise on applicable models. Because the kit is a basic replacement part it focuses on fit and function rather than premium hardware features such as grease fittings or heavy-duty metal alloys, so long-term durability may vary with driving conditions. Expect an affordable, no-frills replacement that restores normal handling quickly but may not match heavy-duty aftermarket links intended for aggressive driving or lifted setups.
Best for: Convenience-driven buyers who want a quick, budget-friendly factory-style replacement to stop front-end noise and restore everyday handling on their Buick Regal.
Less Ideal for: Drivers seeking heavy-duty, performance, or off-road sway bar links for aggressive use or modified suspensions should consider reinforced aftermarket options instead.
- Sold as a matched two-piece front link kit for easy full-side replacement.
- Designed to directly replace worn factory links to eliminate front-end clunks and restore handling.
- Black finish and preassembled components simplify installation and visual integration.
- Multiple customer reports confirm straightforward fit and immediate noise reduction.
- Manufacturer uses basic materials and the kit lacks grease fittings for re-lubrication.
- Not positioned as a heavy-duty or performance link for aggressive driving or modified suspensions.
Verdict A practical, easy-to-install front link kit that quickly fixes worn factory links and restores everyday handling on a Buick Regal but is not designed for heavy-duty performance use.
3. Detroit Axle Front and Rear Sway Bar Link Kit for Buick Regal
| Brand | Detroit Axle |
|---|---|
| Item model number | 80006-4E-DA |
| Fitment | Buick Regal |
| Kit contents | 2 front and 2 rear sway bar end links |
This Detroit Axle kit replaces the front and rear stabilizer links on Buick Regal models and is intended as a direct-fit, factory-replacement style solution. The kit contains two front and two rear sway bar end links so you can replace worn links on both axles in one service. Built for durability, the components are thicker than many stock pieces and undergo impact and fatigue testing for longer life under spirited driving. Install is straightforward for a competent DIYer or tech; many users note the included Allen-style feature makes assembly easier, though serviceable grease fittings may only be present on the front links. In practice the stiffer links reduce play and eliminate rattle, which sharpens body control during cornering and gives a more connected feel to the chassis. Trade-offs are that corroded factory mounting hardware can make removal difficult and the increased stiffness can transmit slightly more road noise over rough surfaces. For Regal owners seeking a long-lasting, performance-minded replacement, this kit delivers tangible handling improvements.
Best for: Performance-minded Buick Regal owners who prioritize firmer handling and long-lasting suspension components and are comfortable with a hands-on installation or professional fitment.
Less Ideal for: Buyers who prefer the soft factory compliance for a very quiet ride or who need a completely serviceable greasable joint on every link should consider different options.
- Includes both front and rear links so complete stabilizer replacement is possible in one purchase
- Thicker, more robust construction aimed at increased durability under spirited driving
- Direct-fit design tailored for Buick Regal mounting points for predictable installation
- Undergoes impact, wear, and fatigue testing to help ensure longevity
- Only the front links appear to have grease fittings, despite product images showing more serviceable joints
- Removal can be difficult if original mounting nuts and studs are rusted or seized
Verdict A beefy, direct-fit sway bar link kit that tightens body control on Buick Regal at the cost of a firmer ride and potentially limited greasability.
4. MOTOKU Front Sway Bar Link Kit for Buick Regal (2018–2020)
| Compatible models | Buick Regal 2018-2020 |
|---|---|
| Position | Front driver and passenger |
| Exterior | Machined |
This MOTOKU sway bar link kit replaces both driver and passenger front links on Buick Regal 2018–2020. It is supplied as a matched pair with machined exterior surfaces and includes the fasteners needed for installation, so it is typically used when worn links cause clunks or excess body roll. In everyday use it restores a firmer, quieter front end and is a common DIY replacement for owners doing front suspension maintenance. The machined finish and included nuts simplify fitment and help with corrosion resistance compared with plain stock replacements. Important limitations are that this is an aftermarket budget option rather than a factory-branded component and long-term durability can vary with driving conditions; heavy-duty or performance-oriented drivers may prefer a more robust aftermarket or OE-level part. Fitment is limited to the specified Buick Regal model years, so confirm year before purchasing.
Best for: Budget-conscious owners who prioritize low replacement cost and straightforward DIY repairs on a Buick Regal 2018–2020 and want a quick way to eliminate front-end clunks and looseness.
Less Ideal for: Drivers who frequently tow, carry heavy loads, or demand performance-oriented suspension components should consider heavy-duty or premium alternatives tailored for higher stress use.
- Sold as a matched driver and passenger pair for straightforward replacement
- Includes new nuts for immediate installation without hunting hardware
- Machined exterior for a neater fit and improved surface protection compared with unrefined cast parts
- Direct fit for Buick Regal 2018–2020 so alignment of mounting points is straightforward
- Aftermarket budget construction may not match the long-term durability of higher-end or heavy-duty links
Verdict A cost-effective, direct-fit front sway bar link pair for Buick Regal 2018–2020 that gets a worn suspension feeling fixed quickly for budget-minded owners.
5. X AUTOHAUX Front Suspension Kit with Inner & Outer Tie Rod Ends and Sway Bar Links
| Fitment | Buick Regal 2012, Buick Regal 2014-2017 |
|---|---|
| Includes | 2 sway bar links, 2 outer tie rod ends, 2 inner tie rod ends |
| Material | Iron |
| Position | Front |
This X AUTOHAUX kit bundles front sway bar links with inner and outer tie rod ends designed to replace worn steering and stabilizer components on compatible Buick Regal models. It is used to eliminate clunking over bumps, reduce body lean in turns, and address loose or misaligned steering by swapping in fresh linkage parts. The listing emphasizes durable iron construction and corrosion resistance, and the kit includes two stabilizer links plus two inner and two outer tie rod ends for a direct replacement installation. Practical benefits include restoring factory-like steering feel and addressing uneven tire wear caused by worn tie rods. The kit does not include installation instructions and professional or experienced installation is recommended; buyers should confirm fitment to the specific model year before purchase. As an aftermarket assembly, fit and finish can vary compared with factory-quality parts, so alignment after installation is necessary to ensure proper steering geometry.
Best for: Risk-averse mainstream buyers seeking a straightforward suspension refresh to restore stable steering and eliminate noises while preferring a complete kit that addresses multiple front-end wear items.
Less Ideal for: Buyers who want exact factory-quality parts or who need a single-component replacement rather than a bundled kit should consider other options.
- Complete front kit includes sway bar links plus inner and outer tie rod ends for one-side replacement coverage
- Constructed from iron with corrosion-resistant finish to withstand road exposure
- Direct-replacement design intended for compatible Buick Regal model years to simplify swap-in installation
- No installation manual included so professional installation or prior experience is recommended
- Aftermarket fit may require fine adjustments and a post-service wheel alignment
Verdict A convenient bundled replacement for worn front stabilizer and tie rod components on compatible Buick Regal models that restores steering stability but may need professional installation and alignment.
6. TCHENPART K750519 Front Sway Bar Link Kit
| Brand | TCHENPART |
|---|---|
| Model | K750519 Sway Bar Links |
| Position | Front |
| Manufacturer Part Number | TC-PHG39 |
This TCHENPART K750519 sway bar link kit replaces worn front stabilizer end links to reduce vibration, stop clunking noises, and restore the Regal’s roll control during cornering. Intended as a direct-fit replacement, the kit includes two front links finished for corrosion resistance and installs in the same orientation as the factory parts. In practical use you swap the old, loose links for these using basic hand tools or a shop visit; many owners report straightforward installation and immediate improvement in steering feel and suspension quietness. The links come with serviceable ball joints and, in some applications, grease fittings so you can maintain them rather than leaving them sealed. Expect a budget-friendly, functional part that addresses the common symptoms of failing links, though a few users noted nut fit and initial greasing are needed and long-term durability may not match higher-end aftermarket or factory-quality options. For a cost-conscious repair that cures noise and restores handling, these are a sensible choice with the caveat that careful installation and proper tightening are important.
Best for: Practical optimizers seeking an affordable, effective front sway bar link replacement to stop noise and restore handling on a budget-focused repair plan for their Buick Regal.
Less Ideal for: Drivers wanting long-term, high-end suspension components or those who prefer fully pre-greased, premium aftermarket links should consider higher-tier alternatives.
- Direct-fit replacement for compatible front suspension applications on listed models
- Improves anti-roll control and reduces knocking and rattling noises when installed
- Often simple to install with common tools or a routine shop job
- Includes serviceable ball joints and optional grease fittings for maintenance
- Some users reported loosened lock nuts or slightly different nut sizes requiring re-tightening or extra tools
- May not match longevity of premium or factory-quality sway bar links
Verdict A budget-friendly, direct-fit front sway bar link kit that restores handling and quiets suspension noise for a practical, cost-conscious Buick Regal repair.
7. ATRACYPART Front Sway Bar Stabilizer Link Kit, 2-Pack
| Brand | ATRACYPART |
|---|---|
| Manufacturer | ATRACYPART |
| Manufacturer Part Number | AP-A2270 |
| Compatible Vehicles | Buick Regal and other listed Buick/Chevy/Pontiac/SAAB models |
| Warranty | 12-Month |
This ATRACYPART front sway bar stabilizer link kit replaces worn links to restore steering stability and reduce body roll and clunking from the front suspension. It is supplied as a left and right pair intended for straightforward replacement of failed links on compatible Buick Regal and similar vehicles. The parts are described as manufactured to match the original fit and include corrosion-resistant construction for longer service life. In practice this means you should expect improved handling feel and reduced noise after installation, and many owners report an easy install and correct fit. Build quality reviews are mixed, with several users praising durability while a minority reported breakage during installation, so careful handling and correct torque during fitment are important. The kit comes with a 12-month warranty which provides some buyer protection. This is a practical, budget-friendly factory-style replacement for owners who want to fix handling issues without upgrading to performance hardware.
Best for: Buyers seeking a balanced, no-fuss factory-style replacement to restore ride stability and eliminate front suspension noise will appreciate this kit.
Less Ideal for: Drivers looking for heavy-duty or performance sway bar links for aggressive driving or track use should consider aftermarket performance options instead.
- Sold as a matched left and right pair for one-step front suspension repair
- Designed to match factory fit and function for direct replacement
- Corrosion-resistant construction for longer on-vehicle life
- Many buyers report straightforward installation and correct fit on compatible models
- Some customers reported parts failing or coming apart during installation, indicating variable quality control
- Not a performance upgrade; restores stock behavior rather than improving handling beyond factory
Verdict A budget-friendly, factory-style pair of front sway bar links that restores stability for Buick Regal owners but is not a performance upgrade.
Choosing the Right Buick Regal Sway Bar Link: Key Factors to Consider
Vehicle-Specific Fitment
Correct fitment is essential because sway bar links attach to precise suspension points that vary by year, trim, and axle position. A link that does not match the Buick Regal mounting dimensions can cause incorrect geometry, rapid wear, or failed installation. When fitment is correct, the link moves as intended with the sway bar and control arm, preserving handling characteristics.
Always verify whether a link is designed for the front or rear of the vehicle and for the Buick Regal model year you own. Fitment that includes proper bushings and hardware reduces the risk of noise and ensures the part sits without stressing adjacent components.
Joint Design and Bushing Type
The joint design determines how well the link copes with movement, vibration, and lateral forces. Ball-joint style links offer more articulation but can transfer noise if poorly damped. Rubber or elastomer bushings cushion movement and reduce clunking, while polyurethane provides firmer response with potentially more noise. Consider the typical driving style and road conditions when choosing bushing materials.
Inspect whether the joint is sealed against contaminants. A well-sealed joint resists water and grit, which lengthens service life and maintains smooth operation over time.
Material and Corrosion Protection
Sway bar links are exposed to road salt, water, and debris, so material choice affects longevity. High-strength steel or treated alloys resist bending under load, while zinc plating, powder coating, or other corrosion-resistant finishes prevent rust that can seize fasteners or degrade the link. Corrosion protection is especially important in climates with heavy winter use.
Stronger materials also sustain repeated loading without permanent deformation, preserving suspension geometry and reducing the chance of sudden failure.
Noise and Vibration Control
Many drivers replace sway bar links because of clunking or rattles. Components designed with noise-mitigating bushings, tight tolerances, or integrated dampers help eliminate common symptoms like clunks over bumps or loose feeling during cornering. Choosing a link that prioritizes quiet operation improves perceived quality and comfort.
Evaluate whether the design reduces metal-to-metal contact and whether replacement includes new hardware to prevent gaps that cause noise. Ensuring proper torque during installation also helps keep rattles from developing.
Durability Under Load
Sway bar links transfer torsional loads between the stabilizer bar and suspension, so fatigue resistance matters. Look for links engineered to withstand repeated cycles without developing play. Reinforced mounting points, thicker shafts, and robust joint construction all contribute to longer service life under demanding driving or rough road conditions.
Durability considerations reduce the frequency of replacements and the risk of sudden handling degradation while driving.
Ease of Installation and Included Hardware
Installation complexity affects whether you can perform the job yourself and how long it will take. Links that include proper nuts, bolts, and lock washers simplify installation and help ensure secure attachment. Designs that do not require press-fitting or specialized tools are more approachable for DIYers.
Clear instructions and complete hardware reduce the chance of incorrect assembly. Also consider whether torque specifications are provided so you can tighten fasteners to the recommended values and avoid under- or over-torquing.
FAQ
What are common symptoms that a Buick Regal sway bar link needs replacement?
You will often notice clunking or rattling over bumps, increased body roll in corners, or a loose feeling in steering. Some symptoms depend on whether the front or rear link is worn, and noise often appears when the suspension cycles. If you hear a persistent clunk and inspection shows play in the link joints, replacement is usually warranted.
Can I replace the Buick Regal sway bar link myself?
Many owners can perform the replacement with basic hand tools and a jack and stands. Tasks include removing the old link, fitting the new part, and tightening fasteners to the correct torque. If hardware is corroded or access is difficult, professional help may be safer. Follow safe lifting practices and confirm torque specs before driving.
How long do sway bar links typically last on a Buick Regal?
Lifespan varies with driving conditions and environment. In moderate climates and normal driving, links often last several years, while exposure to salt, potholes, or heavy loads can shorten service life. Regular inspections for play, damaged bushings, or rust help catch wear before it affects handling.
Does replacing sway bar links improve handling immediately?
Replacing worn links often restores the original handling response and reduces body roll or looseness, so you may notice improved steering feel right away. The extent of improvement depends on how worn the previous components were and whether other suspension parts also need attention.
Should I replace front and rear sway bar links at the same time?
It depends on condition. If only one link is worn or noisy, replacing just that side can be appropriate. However, if both sides show similar age or wear, replacing links in pairs can ensure balanced handling and consistent durability. Inspect both front and rear links and compare wear before deciding.
What maintenance prevents premature stabilizer link wear?
Regular visual inspections, keeping joints free of debris, and addressing rust or damaged bushings early can extend life. Avoiding repeated heavy impacts and driving cautiously over rough roads also reduces stress. When replacing, choose parts with good corrosion protection and sealed joints to minimize future wear.
How We Chose the Best Buick Regal Sway Bar Link
We focused on the practical qualities that matter most for Buick Regal sway bar links. Primary evaluation criteria included correct vehicle-specific fitment and mounting hardware compatibility, since accurate fit prevents premature wear and steering feedback issues. We assessed material quality and corrosion protection because sturdier components and coatings extend service life in wet or salty conditions. Noise and vibration resistance was a major filter, looking for designs and bushings that minimize clunking. Durability under load and expected service life were considered, with attention to joint design and reinforcement. Finally, ease of installation and whether common tools suffice influenced selection, since many owners will perform replacement themselves. We excluded universal or non-vehicle-specific links that require alteration to fit, along with components lacking clear fitment information. We also filtered out options with insufficient mounting hardware or unclear warranty support. The remaining picks meet the dimensional and performance needs specific to the Buick Regal while balancing longevity, noise control, and straightforward installation.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing sway bar links for a Buick Regal, prioritize correct fitment, durable joint design, and corrosion resistance to maintain handling and reduce noise. Consider your driving conditions when selecting bushing materials and aim for parts that include proper hardware and torque guidance. Balancing noise control, longevity, and ease of installation will give the best overall value and restore confident cornering.
Explore More:
- Check out all Buick Regal parts & accessories
- Explore Suspension & Steering
- Browse all Auto Parts
