Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Choosing the right Lincoln MKX suspension kit matters because it directly affects ride comfort, handling stability, and long-term component durability. Whether you want a more composed highway ride, crisper cornering, or to replace worn parts, the correct kit makes a noticeable difference in everyday driving.This guide covers seven shortlisted suspension kits chosen for their suitability to the Lincoln MKX. We evaluated each option across fitment accuracy, build quality, and expected longevity to help you narrow the choices. Read on for the factors that should guide your decision and the top picks for different needs.
Looking for other parts? See all Lincoln MKX parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Detroit Axle 10‑Piece Front End Suspension Kit for Ford Edge / Lincoln MKX (Includes 2 Lower Control Arms) |  |
| Best quality Built to a higher standard if you want something more solid | Detroit Axle Front Lower Suspension Kit with Ball Joints and Tie Rods |  |
| Best Value The sweet spot between price and what you get | TRQ Front Steering & Suspension 8-Piece Kit (front) |  |
| Best budget The cheapest option that still gets the job done reliably | AngyMeck 8‑Piece Front Suspension Kit for 2007–2014 Ford Edge & Lincoln MKX |  |
| Highest Rated A top-rated pick with lots of positive feedback | TRQ Front Steering & Suspension 8-Piece Control Arm Kit with Ball Joints |  |
| Most popular A crowd favorite that many people choose with confidence | Detroit Axle Front 8‑Piece Suspension Kit for 07–15 Lincoln MKX / 07–14 Ford Edge |  |
| Best Seller A high-volume bestseller chosen again and again | SCITOO 8‑Piece Front Suspension Control Arm and Steering Kit for Ford Edge / Lincoln MKX (2007–2014) |  |
1. Detroit Axle 10‑Piece Front End Suspension Kit for Ford Edge / Lincoln MKX (Includes 2 Lower Control Arms)
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front Lower |
| Includes | 2 Lower Control Arms, 2 Sway Bar End Links, 4 Tie Rod Ends, 2 Rack Boots |
| Manufacturer Part Number | 80067-10 |
This Detroit Axle kit supplies the main front-end suspension pieces needed when rebuilding the lower steering and control components on a Lincoln MKX: two lower control arms with ball joints, sway bar end links, inner and outer tie rod ends, and rack & pinion boots. It is typically used as a one-stop repair package when the vehicle shows play in the lower control arms or steering tie rods, or when replacing multiple worn parts at once. The parts are marketed as vehicle-specific fitment and many buyers report a straightforward install and solid fit for the MKX. Practical benefits include getting matched components in one box, factory-style ball joints on the arms, and serviceable tie rod joints for future greasing. Limitations to know are occasional kit fill errors and some reports of incorrect or short sway links in select shipments, so verify components before installation and be prepared to source a missing item if needed. The kit aims to balance value and functionality for mid-life suspension repairs on the MKX.
Best for: Balanced all-round buyers who want a single kit to refresh the front suspension on a Lincoln MKX and prefer convenience and coordinated parts over sourcing each component separately.
Less Ideal for: Buyers who require guaranteed perfect kit packing or want premium-brand factory-direct parts should consider purchasing individual high-end components instead.
- Complete front-end kit bundles lower control arms, tie rod ends and sway bar links for a coordinated repair
- Vehicle-specific fit claimed for Lincoln MKX which simplifies parts selection
- Includes lower control arms with integrated ball joints for direct replacement
- Many users report easy installation and serviceable tie rod joints for routine maintenance
- Some buyers received incorrect or missing components in the kit which required returns or replacement parts
- A few reports of shorter-than-expected sway bar links that were not usable without swapping with correct-length parts
Verdict: A convenient, value-focused front suspension kit that fits the Lincoln MKX and covers multiple replacement needs but inspect the box on arrival because occasional missing or incorrect parts have been reported.
2. Detroit Axle Front Lower Suspension Kit with Ball Joints and Tie Rods
| Fit Type | Vehicle Specific |
|---|---|
| Auto Part Position | Front Lower |
| Material Type | Alloy Steel, Cast Iron |
| Unit Count | 6.0 Count |
This Detroit Axle kit bundles two front lower control arms with integrated ball joints, two outer tie rod ends, and two sway bar end links to provide a complete front-end refresh for a Lincoln MKX. It is designed for direct replacement use and is typically installed when worn ball joints, tie rods, or sway bar links cause steering play, uneven tire wear, or a clunky ride. The components are made from alloy steel and cast iron and arrive preassembled where applicable so installation is straightforward for a home mechanic or shop. Buyers will appreciate the convenience of replacing multiple wear items at once and the 10-year manufacturer warranty adds confidence. Some customers report minor fitment differences in fastener sizes and occasional missing small hardware, so you should have a basic socket set and a few spare washers on hand. Build quality appears solid for a value-focused aftermarket kit, but a handful of reports cite premature rubber bushing wear on long-term units, so routine inspection after installation is wise.
Best for: Balanced buyers who want a practical, one-stop front suspension refresh for their Lincoln MKX and value parts that make a straightforward DIY or shop install easier.
Less Ideal for: Drivers seeking a long-term performance upgrade or fully OEM-spec restoration should consider higher-end or factory-direct parts instead.
- Complete 6-piece kit replaces ball joints, tie rods, and sway bar links in one purchase
- Preassembled lower control arms with integrated ball joints simplify installation
- Made from alloy steel and cast iron for robust basic strength
- Vehicle-specific fitment reduces the need for modification during install
- Some users report mismatched fastener wrench sizes compared with factory hardware
- A minority of reviews describe premature cracking of rubber components over time
- Occasional missing small hardware like washers or grease fittings reported
Verdict: A convenient, budget-friendly complete front suspension kit for the Lincoln MKX that simplifies replacing worn ball joints and related components, though higher-end options may last longer.
3. TRQ Front Steering & Suspension 8-Piece Kit (front)
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front |
| Unit Count | 1.0 Count |
| Model | TRQ PSA64478 8 Piece Steering & Suspension Kit |
This TRQ 8-piece front steering and suspension kit bundles the major front-end wear items—inner and outer tie rods, lower control arms with ball joints, and sway bar links—so you can refresh steering and suspension at once. It is designed as a vehicle-specific direct-fit kit for compatible Lincoln MKX models and arrives pre-greased with anti-corrosion coating to simplify installation and extend surface life. In practice the kit speeds a multi-part repair by supplying matched components and eliminating the need to source individual pieces, which helps when you want consistent fit and ride feel. Reviewers report improved steering response and reduced looseness after installation, and TRQ provides DIY videos to help with installation. Expect generally good build quality, but be aware that occasional fitment variations have been reported on some applications requiring dealer-style troubleshooting; also the kit parts do not include zerk fittings for routine joint service. For someone replacing multiple front-end parts at once, this kit delivers convenience and sensible quality, while buyers who need dealer-level exactness should verify fit for their VIN first.
Best for: A practical optimizer who wants a single, ready-to-install kit to refresh the Lincoln MKX front steering and suspension and prefers convenience and matched parts over sourcing components separately.
Less Ideal for: Buyers seeking dealer-level exactness or those unwilling to verify VIN fitment in advance should consider checking with a shop or choosing a vendor offering guaranteed fitment support.
- Complete front-end coverage in one kit reduces parts sourcing and ensures matched components
- Pre-greased joints and anti-corrosion coating cut initial maintenance and improve longevity
- Vehicle-specific direct-fit design aims to simplify installation and avoid modifications
- Includes DIY video resources to guide owners through installation
- Some reported fitment discrepancies on certain vehicles mean you should confirm fit by VIN before installing
- Ball joints lack grease fittings for later routine servicing
Verdict: If you want a convenient, value-focused way to replace multiple front steering and suspension parts on a Lincoln MKX, this TRQ kit bundles the essential components in one vehicle-specific package.
4. AngyMeck 8‑Piece Front Suspension Kit for 2007–2014 Ford Edge & Lincoln MKX
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front Lower |
| Auto Part Orientation | Front |
This AngyMeck 8-piece front suspension kit bundles the parts needed to refresh the entire front lower steering and suspension on a 2007–2014 Lincoln MKX. It includes left and right lower control arms with ball joints, inner and outer tie rod ends, and sway bar end links so you can replace worn components in one service session. The parts are described as direct factory-quality replacements with pre-greased ball joints and corrosion-resistant coatings, which makes installation easier and reduces initial maintenance. In practice the kit covers common symptoms such as clunking, looseness, steering vibration, and uneven tire wear and lets a shop restore factory steering feel and alignment without piecing separate parts together. As a budget-minded option it delivers good value, though long-term durability compared with higher-end name-brand assemblies is uncertain and rusted factory fasteners on older MKXs can complicate installation. Expect a full alignment after fitting to get handling back to spec.
Best for: Budget-conscious owners looking to restore steering and front suspension performance on a Lincoln MKX with a single, all-in-one parts purchase and minimal parts-sourcing hassle.
Less Ideal for: Drivers seeking an OE brand-name replacement with documented long-term durability or those wanting performance-tuned aftermarket suspension components should consider other options.
- Complete kit replaces lower control arms, inner and outer tie rods, and sway bar links so you can service the whole front end at once.
- Pre-greased ball joints and quality bushings reduce initial break-in and simplify installation.
- Anti-corrosion coating and heavy-duty construction aimed at resisting road salt and debris.
- Vehicle-specific fit for 2007–2014 Lincoln MKX ensures correct mounting points and bolt patterns.
- Long-term longevity versus premium OEM replacement parts is not proven by the listing.
- Installation on older MKX examples may require cutting or replacing rusted factory hardware.
Verdict: A cost-focused, all-in-one front suspension kit that restores steering and front-end components on 2007–2014 Lincoln MKX models without sourcing individual parts.
5. TRQ Front Steering & Suspension 8-Piece Control Arm Kit with Ball Joints
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front Lower |
| Material | Alloy Steel |
| Unit Count | 1.0 Count |
This TRQ 8-piece front steering and suspension kit is a direct-fit replacement designed to restore steering geometry and front-end stability on compatible Lincoln MKX vehicles. The kit bundles front lower control arms with pressed-in ball joints, inner and outer tie rods, and sway bar links so you can replace multiple worn components in one job rather than sourcing parts separately. Parts arrive pre-greased and anti-corrosion coated to simplify installation and help longevity, and TRQ provides DIY videos to walk through the process. In practice the kit will improve road feel and reduce play if your original front suspension components are tired, but installation is hands-on and may require a ball-joint press, alignment afterward, and time dealing with rusted fasteners on older cars. Build quality in most reviews is solid and the direct-fit approach saves time, though some buyers have reported inconsistent longevity on certain joints. For a convenience-focused owner wanting a single kit to bring a Lincoln MKX front end back to factory-style handling, this is a practical option with some installation effort required.
Best for: Convenience-driven buyers who prioritize a single, vehicle-specific kit to replace multiple front steering and suspension parts at once to save time and simplify repairs.
Less Ideal for: Drivers looking for performance upgrades or heavy-duty aftermarket components should consider purpose-built alternatives rather than a direct-fit restoration kit.
- Complete kit replaces control arms, inner and outer tie rods, and sway bar links in one purchase
- Pre-greased components and anti-corrosion coating reduce initial prep and help durability
- Vehicle-specific design for direct fit minimizes modifications during install
- Includes pressed ball joints to simplify assembly compared with separate part purchases
- Some user reports of premature wear on ball joints and dust boots on a minority of units
- Installation can require specialty tools and an alignment after fitting
Verdict: A convenient, all-in-one front suspension kit for Lincoln MKX owners who want direct-fit replacements to restore steering feel, but expect a hands-on install and occasional quality variation.
6. Detroit Axle Front 8‑Piece Suspension Kit for 07–15 Lincoln MKX / 07–14 Ford Edge
| Fitment | 2007–2015 Lincoln MKX / 2007–2014 Ford Edge |
|---|---|
| Kit contents | 2 lower control arms, 4 tie rod ends, 2 sway bar end links |
| Manufacturer | Detroit Axle |
| Manufacturer part number | 80067-8A |
| Position | Front Lower |
This Detroit Axle 8-piece front suspension kit supplies the common wear items you need when refreshing a tired front end: two lower control arms with ball joints, four inner/outer tie rod ends, and two sway bar end links. It is designed as a direct replacement for 2007–2015 Lincoln MKX (and 2007–2014 Ford Edge) and is typically used when steering feels loose, you hear clunks over bumps, or alignment cannot be held. The parts are factory-replacement style and arrive as a matched set so installers can swap multiple components at once instead of ordering separately. Buyers report good fit and noticeable improvement in handling and road noise after installation. Limitations to note are occasional missing fasteners or changing part styles between batches, and some installers will need to source cam bolts or specialty hardware separately. Expect to have alignment after installation and allow a mechanic or a confident DIYer time to manage any small hardware gaps.
Best for: Convenience-driven buyers who want a single, ready-to-install kit to refresh the front suspension of a Lincoln MKX without sourcing individual parts and who prefer a straightforward repair process.
Less Ideal for: Buyers seeking brand-new OEM-sourced components or those who require every original fastener included should consider alternatives or plan to purchase additional hardware separately.
- Complete matched set covers the most commonly worn front-suspension parts for a single repair job
- Designed for direct replacement fit on Lincoln MKX (2007–2015) which speeds installation
- Components are factory-replacement style and tested for impact, wear, and fatigue
- Saves time compared with buying each suspension part separately
- Some kits have been reported missing specific fasteners or hardware in certain batches
- Occasionally parts arrive with differing fittings (sealed vs greaseable) requiring adaptation or replacement bolts
Verdict: A convenient, all-in-one front suspension kit that restores steering feel and reduces noise on Lincoln MKX models, though installers should verify included hardware before starting the job.
7. SCITOO 8‑Piece Front Suspension Control Arm and Steering Kit for Ford Edge / Lincoln MKX (2007–2014)
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front Lower |
| Material | Alloy Steel, Stainless Steel |
| Unit Count | 8.0 Count |
This SCITOO eight-piece front suspension kit supplies the main chassis components you need to refresh the front end on a 2007–2014 Lincoln MKX: lower control arms with ball joints, inner and outer tie rod ends, and sway bar end links. The parts arrive fully assembled and coated for corrosion resistance, which makes them ready for direct replacement during a workshop service. In practical use the kit restores steering feel and chassis stability by replacing multiple wear items at once, so you avoid mixing old and new components. Notable features include vehicle-specific fitment, forged steel construction, and supplied alternates to common factory part numbers for easier matching. Limitations are that the kit targets the front lower position only and professional installation is recommended to ensure alignment and safe operation. Also this bundle does not include alignment or additional suspension hardware like ball joint press adapters.
Best for: Risk-averse mainstream buyers who prefer a single, vehicle-specific kit to restore front-end steering and stability on a Lincoln MKX without sourcing parts individually.
Less Ideal for: Shoppers who want only one replacement part at a time, do their own press-fit suspension work, or need rear suspension components should consider alternatives.
- Comprehensive eight-piece kit replaces multiple front suspension and steering wear items at once
- Forged alloy/stainless steel construction with electrophoretic coating for corrosion resistance
- Supplied parts arrive fully assembled and ready for direct replacement
- Vehicle-specific fitment for 2007–2014 Lincoln MKX improves compatibility with factory mounting points
- Requires professional installation and post-installation wheel alignment
- Covers front lower suspension components only and excludes related hardware or tools
Verdict: A convenient, vehicle-specific front suspension kit that replaces multiple wear items at once to restore steering and chassis stability on 2007–2014 Lincoln MKX models.
Choosing the Right Lincoln MKX Suspension Kit: Key Factors to Consider
Fitment and Compatibility
Accurate fitment matters because suspension components must align with vehicle mounting points to perform correctly and avoid premature wear. A kit that specifies compatibility with the exact Lincoln MKX model year and subtrim reduces installation time and the risk of incorrect part pairing.
Check mounting patterns, bracket locations, and any required hardware. Kits that include vehicle-specific brackets or adapters are easier to install and tend to provide better long-term reliability than universal parts that require modification.
Spring Rate and Ride Tuning
Spring rate influences ride comfort, body control, and how the vehicle responds to bumps and cornering. Softer rates can improve comfort but may increase body roll, while firmer rates tighten handling at the cost of ride harshness.
When evaluating kits, consider the stated spring rates and whether the tuning is aimed at comfort, performance, or a balanced compromise. If you frequently carry passengers or cargo, choose rates that preserve load handling and maintain proper ride height.
Shock Absorber Technology
Shock absorbers control damping and are critical for managing rebound and compression during driving. Different technologies such as monotube, twin-tube, or adjustable designs offer varying tradeoffs in heat dissipation, responsiveness, and ride quality.
Look for damping characteristics matched to the intended use—street-oriented damping prioritizes comfort and small-bump compliance, while firmer damping favors precise control. Adjustable shocks provide flexibility to tune the ride after installation.
Corrosion Resistance and Durability
Suspension parts are exposed to moisture, road salt, and debris, so corrosion resistance affects longevity and maintenance. Coatings, stainless fasteners, and protective boots help prevent premature failure and maintain performance over time.
Consider the expected environment for the vehicle. If you drive in wet or winter conditions, prioritize kits with enhanced corrosion protection and replaceable wear items to extend service life.
Completeness of the Kit
A complete kit that replaces both shocks and springs, plus associated mounts, bushings, and hardware, simplifies installation and ensures balanced performance across axle ends. Partial replacements can leave weak points that limit overall improvement.
Review what is included and whether additional components like sway bar links or control arm bushings are recommended. A truly comprehensive kit reduces the chance of follow-up purchases and helps maintain consistent ride and handling.
Installation Considerations
Ease of installation affects cost and downtime. Kits that use standard fasteners, include clear instructions, and avoid special tools lower the barrier for a DIY install or make the professional job faster.
Also consider alignment recommendations after fitting a new kit. Some changes in ride height or spring rate will require an alignment to ensure correct tire wear and handling characteristics.
How We Chose the Best Lincoln MKX Suspension Kit
We focused on kits specifically designed to fit the Lincoln MKX and evaluated them across multiple practical dimensions relevant to owners. Key filters included exact vehicle fitment and bolt-on compatibility, construction materials and corrosion resistance, shock and spring tuning for street use, and the completeness of the kit in replacing worn components. We also considered warranty support and documented manufacturer specifications for load ratings and travel.Excluded from consideration were universal-fit assemblies, one-off custom builds, and components that required extensive fabrication or welding. We prioritized kits that minimize additional parts purchases and that address common wear points on this vehicle. The result is a list of seven options that balance reliable fitment, component quality, and real-world performance expectations for Lincoln MKX owners.
Our full evaluation process is outlined in our review methodology.
FAQ
How do I know which suspension kit fits my Lincoln MKX?
Start by confirming your MKX model year and any factory suspension options that may affect fitment. Look for kits that explicitly list compatibility with your exact year and subtrim. Check included mounting hardware and notes about required additional parts to avoid surprises at install.
Will a suspension upgrade kit change ride height on my Lincoln MKX?
It depends on the kit. Some upgrade kits maintain factory ride height while improving damping and spring control. Others, such as lowering or lift-oriented kits, are designed to change ride height. Verify the kit description for stated ride height change and any effects on alignment or clearance.
Do I need an alignment after installing a suspension replacement on the MKX?
Usually yes. Replacing shocks, springs, or suspension geometry components often changes wheel alignment values. Getting a professional alignment after installation helps ensure safe handling and even tire wear.
Can I install a suspension components kit myself?
If you have basic mechanical skills and the right tools, some kits are feasible for a competent DIYer, especially if they use standard fasteners and provide clear instructions. However, tasks that require spring compression, strut assembly, or precise alignment may be better handled by a shop for safety and accuracy.
How long should a performance suspension kit last on a Lincoln MKX?
Longevity varies based on component quality, driving conditions, and maintenance. Well-built components with corrosion protection often last several years under normal driving. Harsh climates, heavy loads, or aggressive driving can shorten service life, so inspect components periodically.
What are common signs that my MKX suspension needs replacement?
Look for increased body roll, a bouncy or harsh ride, uneven tire wear, leaking shock absorbers, or unusual noises over bumps. These symptoms often indicate worn shocks, springs, or bushings and suggest it is time to consider a comprehensive kit.
Conclusion
When choosing a Lincoln MKX suspension kit, prioritize correct fitment, appropriate spring rates, and shock damping that match your driving priorities. Balanced kits that replace related wear items and offer corrosion protection typically provide the best long-term value.Weigh the tradeoffs between comfort and handling, and account for installation and alignment needs. Focusing on the factors above will help you select a kit that improves daily drivability while minimizing follow-up maintenance and fitment issues.
Explore More:
- Check out all Lincoln MKX parts & accessories
- Explore Suspension Kits Maintenance & Repair Guides
- Explore Suspension & Steering
- Browse all Auto Parts
