Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Choosing the right Kia Soul radiator hose matters because a failing hose can cause overheating, loss of coolant, and unexpected breakdowns. You want a hose that fits precisely, resists heat and pressure, and holds up to road chemicals and age. This guide highlights seven shortlisted radiator hoses for the Kia Soul chosen for their durability, fitment accuracy, and construction quality. We evaluated each option across material, connection type, and compatibility so you can pick the hose that best restores reliable cooling. Read on to see the top picks and the criteria we used to select them.
Looking for other parts? See all Kia Soul parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | YGDMD Silicone Radiator Heater Hose, 3/4" ID x 5 ft |  |
| Most Popular A crowd favorite that many people choose with confidence | Dayco 72004 Radiator Hose |  |
| Best Quality Built to a higher standard if you want something more solid | Allstar Performance 1-3/4" x 16-1/2" Lower Radiator Hose |  |
| Best Budget The cheapest option that still gets the job done reliably | Dayco 72592 Curved Radiator Hose |  |
| Most Sold A high-volume bestseller chosen again and again | EVIL ENERGY 5/16" Silicone Heater Hose, Straight, 5 ft |  |
| Best Value for Money The sweet spot between price and what you get | ACDelco Gold 22486M Molded Upper Radiator Hose |  |
| Best Overall The best all-around choice for most situations | ACDelco Gold 24403L Molded Lower Radiator Hose |  |
1. YGDMD Silicone Radiator Heater Hose, 3/4" ID x 5 ft
| Inner diameter | 0.74 inches |
|---|---|
| Material | Silicone |
| Length | 5 ft |
| Rupture pressure | 650 PSI |
| Working pressure | 250 PSI |
This silicone heater hose is a cut-to-fit replacement designed for coolant and gas lines in a Kia Soul cooling system. It is typically used to replace worn or leaking heater hoses and can be trimmed to length for a custom fit; the polyester fiber reinforcement raises rupture resistance to the advertised 650 PSI while a normal working pressure around 250 PSI covers everyday engine cooling demands. The silicone construction keeps the hose flexible across a wide temperature range so it resists brittleness in cold and holds up to high under-hood heat. Installation is straightforward: slide clamps over fittings, cut the hose to length, and secure with clamps. Important limitations are that it is intended for water and gas only and should not be used with oil, and the single universal size may require trimming and careful fit verification for specific Kia Soul model years or routing paths. For reliability-focused owners wanting a durable, high-temperature replacement, this delivers a robust, serviceable option.
Best for: Reliability-focused Kia Soul owners who prioritize durable, heat-resistant replacements and prefer a serviceable hose they can trim and install themselves.
Less Ideal for: Owners who want a direct factory-spec preformed hose for a specific Kia Soul year or those who need a hose compatible with oil or specialized fluids.
- Silicone construction resists temperatures from -58 to 392°F for long-term flexibility
- Polyester fiber reinforcement increases rupture pressure to 650 PSI
- Cut-to-fit 5 ft length allows custom trimming for different hose runs
- Normal working pressure around 250 PSI suitable for typical engine cooling systems
- Single universal diameter may need trimming or additional fittings to match some Kia Soul hose routings
- Not rated for oil use, limiting applications to coolant or gas lines
Verdict A heat-resistant, reinforced silicone hose that offers reliability and customizable fit for Kia Soul coolant repairs, but it is not a direct preformed factory replacement or suitable for oil.
2. Dayco 72004 Radiator Hose
| Material | Rubber, Silicone |
|---|---|
| Manufacturer Part Number | 72004 |
| Manufacturer | Dayco |
| Model | Radiator Hose |
This Dayco radiator hose is a straightforward replacement part intended to restore a vehicle's coolant routing where the original hose has failed. Typically used when replacing an aging or leaking upper or lower radiator hose, it installs like a factory-style part and accepts standard clamps. The hose is molded rubber with reinforced construction for typical engine bay temperatures and pressures, and customers report consistent fit and dependable sealing with factory clamps. Its practical benefits are simple: it gets a cooling circuit back to working order quickly and without modification, and Dayco’s manufacturing makes it a common OEM-quality swap for routine maintenance. Limitations are that it is a single-piece rubber hose rather than a premium silicone option, so it may not offer the extended high-temperature life of specialized aftermarket hoses; buyers should confirm exact Kia Soul fitment year and engine before ordering because vehicle fit varies by model year and engine type.
Best for: Convenience-driven buyers who prioritize quick, no-fuss repairs and want a dependable factory-quality replacement to get their Kia Soul back on the road with minimal downtime.
Less Ideal for: Drivers who want a high-end performance or silicone hose for extended high-temperature service or those seeking a custom-length or braided hose solution should look elsewhere.
- Factory-quality direct-replacement fit for common cooling system repairs
- Molded rubber construction compatible with standard hose clamps
- Reinforced design suitable for normal engine temperatures and pressures
- Well-reviewed by other drivers for reliable sealing and fit
- Not a silicone performance hose so long-term high-heat resistance is lower than premium alternatives
- Fitment can vary by Kia Soul model year and engine so verification is required before purchase
Verdict A reliable, factory-style replacement hose that makes fast, hassle-free cooling system repairs for the Kia Soul but is not a high-temperature performance upgrade.
3. Allstar Performance 1-3/4" x 16-1/2" Lower Radiator Hose
| Material | Rubber |
|---|---|
| Nominal Wall Thickness | 0.125 inches |
| Outside Diameter | 1.75 Inches |
| Item Length | 16.5 Inches |
This Allstar Performance lower radiator hose is a two-ply rubber replacement intended to carry coolant between the radiator and lower engine connection. It is typically used as a direct replacement on vehicles requiring a 1.75-inch lower hose and 16.5-inch length, offering a thick wall and abrasion-resistant cover that resists hardening and cracking. In real-world use the hose stays flexible on tight bends without kinking and holds its shape under pressure, which helps prevent coolant loss and collapse in performance or high-heat conditions. The construction is straightforward rather than decorative, so it performs as a durable factory-quality replacement rather than a styling upgrade. Limitations to consider are the fixed diameter and length which require confirming fitment to your Kia Soul before purchase, and the hose does not include clamps or additional fittings so those must be sourced separately. For a performance-minded owner who needs a stout, flexible lower hose that tolerates tight routing and heat, this is a solid option.
Best for: Performance-oriented owners who prioritize durable, high-quality cooling components and need a robust lower radiator hose that resists collapse and abrasion under demanding driving conditions.
Less Ideal for: Buyers seeking a direct-fit, vehicle-specific hose for every Kia Soul model without measuring should consider hoses sold explicitly for their model year or hoses that include installation hardware.
- Two-ply rubber construction resists hardening and cracking over time.
- Abrasion-resistant outer cover for improved longevity in tight engine bays.
- Maintains shape under tight bends and pressure, reducing risk of collapse.
- Thicker wall offers robustness suitable for higher-heat or performance applications.
- Single fixed diameter and length require confirming compatibility with the vehicle before installation.
- No clamps or hardware included, so additional parts are needed for installation.
Verdict A stout, abrasion-resistant lower radiator hose built for performance use, but confirm diameter and length compatibility with your Kia Soul before buying.
4. Dayco 72592 Curved Radiator Hose
| Material Type | Rayon,Rubber |
|---|---|
| Item Type Name | Radiator Hose |
| Included Components | Radiator Hose |
| Unit Count | 1.0 Count |
The Dayco 72592 is a curved replacement radiator hose intended to route coolant where the original hose fits on the vehicle. It is used as a direct replacement during cooling system repairs to restore coolant flow and prevent leaks. The hose is made from rubber and rayon construction and matches the general shape of the factory part, which helps with straightforward installation using existing clamps. For routine repairs it offers a cost-effective way to replace a worn or leaking radiator hose without buying an expensive OEM part. However, some buyers report the curvature does not match the vehicle exactly, so fitment can be hit-or-miss and may require minor trimming or repositioning. The hose does not include clamps or additional fittings, so plan to reuse or purchase hardware separately. If you need a simple, affordable replacement that performs like a typical aftermarket radiator hose, this Dayco unit is practical, but confirm fit before final installation to avoid alignment issues.
Best for: Budget-conscious buyers seeking an affordable, factory-style replacement hose for routine cooling-system repairs on their Kia Soul who prioritize cost savings over perfect fit certainty.
Less Ideal for: Users who require guaranteed exact-fit, vehicle-specific OEM replacements or who prefer a complete kit with clamps and fittings included.
- Budget-friendly alternative to factory replacement
- Curved shape intended to mirror factory routing for easier installation
- Constructed from rubber and rayon for standard coolant resistance
- May not match the original hose curvature precisely for all installations
- Does not include clamps or installation hardware
Verdict A low-cost, factory-style replacement radiator hose that delivers basic function but may require careful fit verification before installation.
5. EVIL ENERGY 5/16" Silicone Heater Hose, Straight, 5 ft
| Hose ID | 5/16" (8mm) |
|---|---|
| Length | 5 Feet |
| Working Pressure | 60 Pound per Square Inch |
| Temperature Range | -67°F to 356°F (-55°C to 180°C) |
This silicone heater hose is a straight, 5-foot replacement intended for coolant and heater lines on passenger vehicles. Constructed with braided polyester reinforcement and silicone inner and outer layers, it meets SAE J20R3 Class A and is designed to handle typical heater/coolant duties without swelling or softening at high temperatures. Use it to replace worn or cracked Kia Soul heater or radiator bypass hoses that match the 5/16 inch inside diameter, trimming to length and securing with clamps. The hose’s 60 psi working pressure and temperature rating from -67°F to 356°F mean it resists heat cycling and remains flexible in cold weather. Practical benefits include improved longevity over EPDM in high-heat applications and good kink resistance for routed heater lines. Important limitations are that the hose is a straight section only, so tight bends may require routing or additional elbows, and it is not rated for fuel, alcohol, or engine oil contact. Verify fit by matching the Kia Soul’s required hose ID and routing before installation.
Best for: Risk-averse mainstream Kia Soul buyers who prioritize a reliable, heat-resistant replacement heater hose and prefer a durable factory-quality-like repair without experimenting with unproven materials.
Less Ideal for: Drivers who need ready-made curved or vehicle-specific molded hoses or who require hoses certified for fuel or oil transfer should look for application-specific assemblies instead.
- Silicone construction tolerates a wide temperature range for durable heater/coolant service.
- Braided polyester reinforcement increases burst resistance and pressure handling.
- 60 psi working pressure with a high burst rating suitable for typical vehicle heating systems.
- Flexible and kink-resistant for easier routing in tight engine bays.
- Straight 5-foot length may require cutting and additional fittings for curved or short runs.
- Not suitable for carrying fuel, alcohol, engine oil, or lubricants.
Verdict A durable, heat-resistant straight silicone heater hose ideal as a risk-averse Kia Soul coolant/heater line replacement when the ID matches, but it requires cutting or fittings for non-straight runs.
6. ACDelco Gold 22486M Molded Upper Radiator Hose
| Material Type | Rubber, Silicone |
|---|---|
| Nominal Wall Thickness | 2.5 millimeters |
| Item Length | 371 Millimeters |
| Item Type Name | Hose Asm |
This ACDelco Gold molded upper radiator hose is a direct-style replacement intended to restore coolant flow and sealing where the original hose has cracked or leaked. Installed in the upper radiator outlet, it connects the radiator to the engine and is used when the factory hose shows age-related cracking, swelling, or leakage. The hose is molded to match factory contours so it fits with the same routing and clamp points, which simplifies installation and reduces need for modification. Constructed from rubber and silicone materials, it is built to resist heat and coolant exposure and to offer durability over time. Buyers should note the listing includes a single hose assembly and that some vehicles may require minor trimming for perfect length on certain applications. The hose carries a long-term manufacturer parts warranty for as long as the original purchaser owns the vehicle, but installation quality and proper clamps remain important to avoid leaks.
Best for: Practical optimizers who want a durable, factory-quality replacement hose that restores cooling system reliability without overspending, and prefer simple direct-fit parts that keep repair time and guesswork low.
Less Ideal for: Those doing a full system overhaul who need a complete hose kit or performance silicone multi-piece plumbing should look for a kit that includes all hoses and fittings.
- Factory-style molded shape for straightforward fit and routing
- Rubber and silicone construction resists heat and coolant exposure
- Single-piece hose assembly reduces need to source multiple parts
- Backed by a long-term parts warranty from the manufacturer
- Sold as one hose assembly only so additional hoses or clamps must be purchased separately if needed
- May require trimming on some vehicles to achieve exact length
Verdict A factory-style, durable replacement upper radiator hose that delivers reliable cooling system repairs for cost-conscious Kia Soul owners seeking practical, no-frills value.
7. ACDelco Gold 24403L Molded Lower Radiator Hose
| Brand | ACDelco |
|---|---|
| Material | Rubber |
| Model | 24403L |
| Manufacturer Part Number | 88908692 |
This ACDelco Gold molded lower radiator hose is a direct-fit replacement built to meet factory-quality expectations. It installs where the lower coolant hose routes between the radiator and engine, providing a sealed path for coolant circulation. The hose’s reinforced rubber construction and thicker walls aim to resist leaks, softening, and abrasion; customers note the beefy feel and a protective sleeve over a bend that helps prevent damage from road debris. Typical use is a routine replacement during cooling-system service or when a cracked or leaking hose is found. Practical benefits include predictable fitment, durability comparable to factory parts, and simplified installation since it is shaped to match OEM routing. Limitations are the single-part focus: it only replaces the lower molded hose so other cooling components may still need service, and fitment must be confirmed for the Kia Soul year and engine variant before purchase. Expect a straightforward swap if the hose number matches your vehicle’s lower radiator hose application.
Best for: Balanced, all-round buyers who prioritize a reliable, factory-quality replacement that minimizes future cooling-system issues and simplifies routine maintenance.
Less Ideal for: Drivers looking for a universal hose solution, adjustable fittings, or a complete cooling-system kit should consider other options that include multiple hoses or accessories.
- Factory-style molded shape for direct replacement and correct routing
- Reinforced rubber construction with relatively thick walls for durability
- Protective sleeve on the bend to reduce abrasion from road debris
- Designed to meet GM-backed factory-quality standards
- Covers only the lower radiator hose so additional hoses or parts may still need replacement
- Fitment depends on exact Kia Soul year and engine variant and must be verified before ordering
Verdict A reliable factory-quality lower radiator hose for buyers who want a direct-fit, durable replacement for their Kia Soul when the application matches.
Choosing the Right Kia Soul Radiator Hose: Key Factors to Consider
Material and Heat Resistance
Hose material directly affects how well it endures engine heat and hot coolant. Look for materials specifically formulated for automotive coolant, such as EPDM or reinforced rubber blends, which resist swelling, hardening, and chemical breakdown. Higher heat resistance reduces the risk of premature cracking or bulging under prolonged high-temperature operation. Materials with good chemical tolerance also withstand antifreeze and additives, which helps prevent internal degradation and leaks over time.
Fitment and Dimensional Accuracy
Correct dimensions and bends are essential for a leak-free installation. A hose that matches the Kia Souls routing will sit without strain, minimizing stress at connection points and reducing the chance of kinking. Accurate inner diameter, wall thickness, and overall length ensure proper flow and compatibility with clamps and fittings. Confirming the hose matches factory routing or OEM size fitment helps avoid trimming or forcing a hose into place.
Connector and Clamp Compatibility
The hose must mate cleanly with the vehicles radiator, thermostat housing, and other coolant ports. Compatibility with standard radiator hose clamps and original-style fittings matters because an improper seal is a common source of leaks. Check that the hose ends accept the same clamp type used on the Kia Soul and that bead or molded fittings align with mating surfaces. A secure clamp interface prevents coolant hose leak scenarios caused by slippage or uneven compression.
Reinforcement and Structural Strength
Reinforcement layers, such as textile or fabric inserts, increase resistance to pressure cycling and external abrasion. A reinforced hose maintains shape under vacuum and pressure variations typical of cooling systems. Stronger wall construction also helps resist collapse when suction occurs and limits the growth of soft spots that lead to failure. For vehicles subjected to heavy use or higher temperatures, reinforcement improves service life and reliability.
Chemical Compatibility and Aging Resistance
Coolant contains additives that can react with incompatible hose materials, accelerating aging and cracking. Choosing hoses designed to resist coolant chemistry and road contaminants reduces long-term deterioration. UV and ozone resistance matter if parts of the hose are exposed in the engine bay. Hoses formulated to resist hardening and brittleness retain flexibility longer, which simplifies future maintenance and reduces the chance of radiator hose symptoms such as soft spots or visible swelling.
Ease Of Installation And Serviceability
A hose shaped to match factory routing saves time and reduces the need for additional tools or modifications during replacement. Clear fitment and hose orientation markings help you install the part correctly the first time. Consider how accessible the clamps and connections will be during service. Hoses that allow standard clamp access and do not require engine disassembly make routine radiator hose replacement and inspections simpler and faster.
FAQ
How can I tell if the Kia Soul radiator hose is failing?
Common radiator hose symptoms include visible cracks, soft or spongy sections, bulging under pressure, and wetness around clamps or connections. You may also notice coolant smells or an unexplained drop in coolant level. Regular visual inspection and feeling the hose when the engine is cool often reveal early signs of deterioration.
Is it necessary to replace both upper radiator hose and lower radiator hose at the same time?
It often depends on age and condition. If one hose shows signs of wear and the other is similarly aged, replacing both can be a prudent preventive step. However, if the lower hose is in good condition and has no soft spots or damage, you can replace the failing hose first and monitor the remaining hose closely.
What should I check before installing a replacement radiator hose?
Confirm the replacement matches the Kia Souls size fitment and routing, and inspect mating surfaces for corrosion or residue. Replace or clean clamps to ensure a secure seal, and verify the hose ends align with fittings without twisting. Always refill and bleed the cooling system according to the vehicles service procedure after installation.
Can I use universal coolant hoses instead of a vehicle-specific hose?
Universal hoses may work in some situations but often require trimming or extra fittings to match the Kia Souls routing. Vehicle-specific hoses that match OEM dimensions typically provide a better fit and reduce installation time. Use universal options only when size fitment and connector compatibility can be confidently achieved.
How long do radiator hoses usually last on a Kia Soul?
Hose lifespan varies with material, driving conditions, and maintenance. Many quality hoses last several years under normal driving, but exposure to high heat, contaminants, or infrequent coolant changes can shorten service life. Regular inspection helps catch issues before failure.
How We Chose the Best Kia Soul Radiator Hose
To assemble these seven top radiator hoses for the Kia Soul we applied targeted, category-specific filters to identify parts that meet real-world needs. Primary evaluation criteria included material composition and heat resistance, since the hose must withstand engine temperatures and hot coolant. Fitment accuracy and OEM-style dimensions were assessed to ensure secure connections and trouble-free installation. Clamp and connector compatibility mattered because correct sealing prevents leaks at junctions. Durability indicators such as reinforcement layers and abrasion resistance informed longevity expectations. We also considered ease of installation, including hose shape and routing that match the vehicles plumbing. We excluded hoses with unclear fitment data, mismatched dimensions, or those lacking reinforcement for automotive coolant systems. We did not include generic universal hoses unless they provided explicit Kia Soul size fitment and connector compatibility. The result is a curated set of hoses that prioritize material integrity, correct sizing, reliable sealing, and installation practicality.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize hoses that match the Kia Souls dimensions and routing while offering durable material and proper reinforcement. Fitment accuracy, clamp compatibility, and chemical resistance are the most important tradeoffs to balance when choosing a replacement. If you want a trouble-free installation, focus on parts that list precise size fitment and include clear end fittings. Regular inspection and timely replacement based on visible symptoms will keep the cooling system reliable and help avoid overheating-related issues.
Explore More:
- Check out all Kia Soul parts & accessories
- Explore Cooling System
- Browse all Auto Parts
