Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Picking the right oil pan for your Hyundai Tucson matters because it affects oil containment, engine protection, and how easy routine service or repairs will be. A poorly fitting or flimsy pan can lead to leaks, difficulty during oil changes, or premature corrosion.This guide covers our shortlisted top picks for Hyundai Tucson oil pans and explains the evaluation criteria we used, including fitment accuracy, material and corrosion resistance, and serviceability. Read on to understand what to prioritize for reliable, long-term performance.
Looking for other parts? See all Hyundai Tucson parts & accessories.
Top Picks at a Glance
| Best overall The best all-around choice for most situations | TRQ Engine Oil Pan with Magnetic Drain Plug |  |
| Best quality Built to a higher standard if you want something more solid | A-Premium Engine Oil Pan with Drain Plug for Hyundai 2.0L Engines |  |
| Best Value The sweet spot between price and what you get | A-Premium Engine Oil Pan with Drain Plug (fits Hyundai Tucson 2016-2018, 1.6L Turbo) |  |
| Best Budget The cheapest option that still gets the job done reliably | BOXI Lower Engine Oil Pan for Hyundai Santa Fe/Tucson and Kia Sportage 2.7L V6 |  |
| Highest Rated A top-rated pick with lots of positive feedback | Dorman 264-359 Engine Oil Pan for Select Hyundai and Kia Models |  |
| Most popular A crowd favorite that many people choose with confidence | KAX Engine Oil Pan for Hyundai Tucson 2.0L (2015–2020) |  |
| Best Seller A high-volume bestseller chosen again and again | KOONDHEEND Engine Oil Pan Compatible with Hyundai Tucson 2.0/2.4 (Replacement for 21510-2G050) |  |
1. TRQ Engine Oil Pan with Magnetic Drain Plug
| Model | TRQ OPA78533 Engine Oil Pan with Magnetic Drain Plug |
|---|---|
| Exterior | Machined |
| Manufacturer | TRQ |
This TRQ lower engine oil pan is a direct-replacement kit designed to replace the lower pan on compatible V6 2.7L vehicles and arrives with a magnetic drain plug to capture metallic debris. It is intended for straightforward installation as a factory-quality replacement, so typical use is swapping the damaged or corroded pan during an oil service or repair. Notable features include machined exterior finish and the included magnetic drain plug, which helps trap particles and provides a simple maintenance advantage. The pan is offered as a pre-assembled lower unit to reduce installation time and the brand supplies how-to videos that can help DIYers follow the correct steps. Limitations to keep in mind are fitment sensitivity — correct fit requires matching the listed year and engine combination — and the kit does not include gaskets or hardware details in the listing, so you may need additional parts for a complete install. For a balanced buyer wanting a reliable replacement that simplifies installation, this pan covers the essentials with a useful magnetic drain plug.
Best for: Balanced buyers who want a dependable, direct-fit replacement that balances ease of installation and maintenance-friendly features for routine repairs and do-it-yourself oil service.
Less Ideal for: Buyers who need a universal pan for multiple engines or those seeking a performance-modified sump with extra baffling and capacity should look elsewhere.
- Direct-fit design for compatible V6 2.7L applications to simplify installation
- Includes a magnetic drain plug to capture metal particles and aid oil system longevity
- Machined exterior finish suggests consistent casting and fitment quality
- Manufacturer provides installation videos to guide DIY replacement
- Listing does not specify included gasket or all installation hardware
- Fitment can be specific to model years and trims so confirmation is required
Verdict: A practical, balanced direct-replacement oil pan for compatible V6 2.7L Hyundai/Tucson owners that adds the convenience of a magnetic drain plug but requires careful fitment confirmation.
2. A-Premium Engine Oil Pan with Drain Plug for Hyundai 2.0L Engines
| Material Type | Cast Iron |
|---|---|
| Fit Type | Vehicle Specific |
| Compatible with Vehicle Type | Car |
| Drain Plug | Included |
This A-Premium oil pan is a vehicle-specific replacement for Hyundai 2.0L engines and is intended to restore the engine lubrication sump when the factory pan is damaged or leaking. Made from cast iron with a painted, corrosion-resistant finish and supplied with a drain plug, it installs in place of the original pan to stop oil leaks and return normal oil capacity and drainage functionality. Typical use is direct replacement during routine repair after impact damage, corrosion, or excessive oil consumption; gasket is not included so you will need a new gasket and proper torque sequence for a reliable seal. The cast-iron construction is durable and mirrors factory form so fit and clearances look OEM-style, but it is heavier than aluminum alternatives and requires correct handling to avoid stress on mounting surfaces. A one-year limited parts guarantee covers the item itself but not installation or related costs. For a performance-focused Hyundai application this pan gives a sturdy, factory-style replacement without aftermarket baffling or sump modifications aimed at track use.
Best for: Performance-oriented owners who prioritize a robust, factory-style replacement to restore correct oil containment and reliability after damage or leakage.
Less Ideal for: Drivers seeking a lightweight or track-oriented oil pan with internal baffling or specialized sump features should consider dedicated performance aftermarket options instead.
- Vehicle-specific fit for Hyundai 2.0L engine applications, matching factory mounting and clearances.
- Cast iron construction offers strong impact resistance and long-term durability.
- Painted, corrosion-resistant finish helps resist environmental corrosion.
- Includes drain plug for immediate installation and normal oil service access.
- Gasket is not included so a separate purchase is required for proper sealing.
- Heavier cast-iron design adds weight compared with aluminum aftermarket pans.
Verdict: A durable, factory-style cast iron replacement that restores proper oil containment for Hyundai 2.0L engines but is heavier and lacks performance-specific features.
3. A-Premium Engine Oil Pan with Drain Plug (fits Hyundai Tucson 2016-2018, 1.6L Turbo)
| Compatible Vehicle | Hyundai Tucson 2016-2018 L4 1.6L Turbo |
|---|---|
| Material Type | Cast Iron |
| Fit Type | Vehicle Specific |
| Drain Plug Included | Yes |
This A-Premium oil pan is a direct-fit replacement designed for the Hyundai Tucson 2016-2018 1.6L turbo. It serves as the lower engine sump, collecting and directing oil back to the pump and includes a factory-style drain plug for routine servicing. Constructed from cast iron/steel with a painted, corrosion-resistant finish, it aims to match factory fitment and restore a leaking or damaged original pan. The product ships without a gasket so installers should plan to use a new gasket or sealant at installation; the pan’s vehicle-specific design reduces the need for modification and speeds up replacement. Practical benefits include a one-year unlimited-mileage guarantee and compatibility that helps resolve oil leaks and low-oil conditions when the original pan is compromised. Trade-offs are that the package may lack protective packaging in some cases and it does not include a gasket, which adds a small extra cost and time for a proper installation.
Best for: Practical optimizers who prioritize a low-cost, straightforward repair that restores factory-style function without premium OEM pricing; ideal for owners maintaining an older Tucson on a budget.
Less Ideal for: Drivers seeking a full OEM parts package or a complete plug-and-play solution including gasket and professional installation services should consider alternatives that include all installation materials or come from a dealer.
- Vehicle-specific fit for Hyundai Tucson 2016-2018 1.6L turbo which simplifies installation
- Includes a drain plug for standard oil changes
- Cast iron/steel construction with corrosion-resistant painted finish for durability
- Backed by a one-year unlimited-mileage guarantee from the manufacturer
- Gasket is not included so a separate seal or gasket must be purchased for proper installation
- Packaging quality may vary which can risk cosmetic damage in transit
Verdict: A budget-friendly, vehicle-specific replacement oil pan that restores function for the 2016–2018 Tucson 1.6L turbo but requires a separately purchased gasket for installation.
4. BOXI Lower Engine Oil Pan for Hyundai Santa Fe/Tucson and Kia Sportage 2.7L V6
| Manufacturer | ShangHai BOXI Auto Parts Co., Ltd. |
|---|---|
| Brand | BOXI |
| Manufacturer Part Number | BX04700111-1 |
| Position | Lower |
This BOXI lower engine oil pan is a direct replacement intended for 2.7L V6 Hyundai Santa Fe (2001-2005), Tucson (2005-2009) and Kia Sportage (2005-2010). It installs in place of the factory lower pan and is sold as a single new unit; the listing notes professional installation is recommended and no instructions are included. The part lists multiple replacement numbers so it is straightforward to confirm fitment against your original pan. In practice this pan offers a budget-friendly way to repair oil leaks or replace a damaged pan without buying an OEM unit. Buyers should expect a basic stamped or cast aftermarket pan that restores containment and drain functionality but may require careful bolt torque and a fresh gasket or sealant to achieve a leak-free fit. It is a simple maintenance or repair item that gets the vehicle back on the road, though the product does not include installation hardware or detailed guidance and quality can vary compared with factory parts.
Best for: Budget-conscious owners looking for an affordable repair part to replace a damaged or leaking lower oil pan on a 2.7L V6 Hyundai or Kia, prioritizing cost savings over OEM sourcing.
Less Ideal for: Owners seeking a factory-original finish, included hardware, or a plug-and-play OEM replacement should consider factory-quality parts or dealer-sourced pans instead.
- Direct-fit replacement for specified 2.7L V6 Hyundai and Kia models with listed OEM numbers for easy verification
- Sold as a new single unit intended to restore oil containment after pan damage or leaks
- Lower-cost aftermarket option compared with buying a factory replacement pan
- Multiple product images and cross-reference numbers help confirm compatibility before purchase
- No installation instructions or hardware included so professional installation or extra parts may be required
- Aftermarket construction may not match factory fitment or finish and could need careful sealing to prevent leaks
Verdict: A cost-effective aftermarket lower oil pan that restores function for 2.7L V6 Hyundai Tucson and related models when a budget repair is needed.
5. Dorman 264-359 Engine Oil Pan for Select Hyundai and Kia Models
| Manufacturer | Dorman Products |
|---|---|
| Model | 264-359 |
| Exterior | Painted |
| OEM Part Number | 3310063; HY1414648; HYP05B; HYP23A; SK264359; 21510-25050; 21510-2G001; 21510-2G050; 2151025051; 2151025053; 2151025055; 215102G002; 215102G500 |
This Dorman oil pan replaces a leaking or damaged factory pan and is engineered to match original fitment on the listed Hyundai and Kia model years. It is supplied as a complete assembly with the drain plug installed and arrives with a painted, corrosion-resistant finish intended to extend service life compared with rust-prone factory pans. Typical use is a direct swap during an oil pan replacement or repair after impact damage or corrosion; installers report the bolt pattern and hole alignment match closely to factory locations for the covered models. Practical benefits include the complete assembly that reduces parts sourcing, a durable coating to resist rust, and compatibility verification via the vehicle selection tool. Limitations are that fitment is specific to the listed model years and trims so you must confirm trim-level compatibility, and some installers recommend using sealant or a new gasket depending on engine variant rather than assuming a no-gasket installation. Overall this is a practical, reliability-focused replacement for Tucson owners needing a dependable oil pan with factory-style fit and corrosion protection.
Best for: Reliability-focused buyers who prioritize a dependable, factory-style repair for a Tucson and want a long-lasting replacement part that reduces repeat repairs.
Less Ideal for: Buyers who need a universal or multi-vehicle pan or who have an unlisted trim or modified engine should look for a part explicitly specified for their configuration.
- Direct replacement engineered to match factory pan for listed Hyundai and Kia years
- Comes as a complete assembly including drain plug for easier installation
- Painted, corrosion-resistant finish improves longevity in rust-prone environments
- Positive owner reports of correct hole alignment and no leaks after installation
- Fitment is limited to specific model years and trims so incorrect selection will cause issues
- May require gasket sealant or a specific gasket choice for certain engine variants rather than guaranteed gasketless installation
Verdict: A factory-fit, corrosion-resistant replacement oil pan built to restore reliable oil containment for covered Hyundai Tucson model years.
6. KAX Engine Oil Pan for Hyundai Tucson 2.0L (2015–2020)
| Model | Engine Oil Pan |
|---|---|
| Exterior | Machined |
| Manufacturer | KAX |
| Manufacturer Part Number | OO1EOP00600 |
This KAX oil pan is a direct replacement for the Hyundai Tucson 2.0L (2015–2020) and is intended to collect and store engine oil while helping dissipate heat and keep contaminants out. It arrives with a drain plug installed and a machined exterior, and the manufacturer states the pan is thickened for improved durability, corrosion resistance, and impact resistance. Installation is intended to be straightforward as a bolt-on replacement when using the appropriate gasket or sealant, and the pan has been inspected before shipment according to the listing. In practice this pan offers a budget-friendly way to replace a damaged or leaking OEM pan and reviewers report good fit and sturdiness. Important limitations are that the kit does not consistently include the pan gasket or mounting hardware, so you should plan to source a correct gasket and bolts before starting the job. Also the listing focuses on the pan shell and does not include additional components some shops might expect.
Best for: Convenience-driven buyers who want an affordable, ready-to-install replacement that restores oil containment with minimal hassle and avoids sourcing a specialized OEM pan.
Less Ideal for: Shoppers who prefer a complete hardware kit or want a bundled gasket and bolt set included should consider options that supply all installation parts.
- Made to match factory fit for Hyundai Tucson 2.0L (2015–2020) for straightforward replacement
- Thickened construction offers improved resistance to impact and corrosion
- Includes a drain plug so you do not need to source that separately
- Machined exterior finish and pre-inspection reduce the chance of visible defects on arrival
- Gasket and mounting bolts are not reliably included, requiring separate purchase
- Listing does not cover all installation hardware or accessories some installers expect
Verdict: A budget-friendly, factory-fit replacement oil pan for the Hyundai Tucson 2.0L that performs well but usually requires buying a gasket and hardware separately.
7. KOONDHEEND Engine Oil Pan Compatible with Hyundai Tucson 2.0/2.4 (Replacement for 21510-2G050)
| Brand | KOONDHEEND |
|---|---|
| Position | Front |
| Model | Engine Oil Pan |
This KOONDHEEND oil pan is built as a direct replacement for Hyundai vehicles that use part number 21510-2G050, including Tucson models with the L4 2.0 and 2.4 engines. It collects and stores engine oil, helps dissipate heat, and keeps contaminants out of the sump like a factory pan. The pan arrives with a drain plug and a set of mounting screws and has a polished exterior and corrosion-resistant finish intended for long service life. Installation is straightforward for a competent DIYer or an independent shop, but a few reviewers noted bolt length and flange thickness differences that required using original hardware or minor trimming on adjacent brackets. That means check fit and bolt compatibility before final assembly. For routine replacement after damage or leaks this pan offers a cost-effective, factory-quality alternative, though buyers should plan to reuse any non-fitting bolts and allow time for test-tightening to confirm leak-free sealing.
Best for: Risk-averse mainstream buyers who prioritize a reliable, factory-style replacement for routine oil pan repair on a Tucson and prefer a part that closely matches factory form and function.
Less Ideal for: Customers seeking an exact bolt-for-bolt swap without any trial fitting or those who want a heavy-duty performance upsize for offroad or racing use.
- Designed to replace part number 21510-2G050 for direct compatibility with Hyundai L4 2.0/2.4 engines
- Includes drain plug and a set of mounting screws for convenience
- Polished, corrosion-resistant finish intended to resist rust and provide longer service life
- Constructed to collect oil and aid heat dissipation similar to factory pans
- Some buyers reported supplied bolts did not fit and needed to reuse original hardware
- Flange thickness can differ from factory pan and may require minor bracket trimming during installation
Verdict: A budget-friendly, factory-style replacement for Hyundai Tucson 2.0/2.4 engines that usually installs easily but may require checking bolt fit and minor adjustments.
Choosing the Right Hyundai Tucson Oil Pan: Key Factors to Consider
Fitment And Compatibility
Accurate fitment is critical because the oil pan must align with the engine block, drain plug, sensors, and transmission housing to seal properly. A pan that is even slightly misaligned can cause stress on fasteners or create gaps that lead to leaks.
Compatibility also affects installation time and the need for additional parts. Choosing a pan listed specifically for the Hyundai Tucson reduces the chance you will need additional adapters, modified gaskets, or altered bolt patterns.
Material And Corrosion Resistance
Oil pans are commonly made from stamped steel or cast aluminum, each with tradeoffs. Steel pans can dent more easily from road debris but are often less expensive; aluminum pans resist corrosion and can dissipate heat better but may be more brittle against impacts.
Coatings and finishes matter as much as base material. A corrosion-resistant coating or anodizing helps prolong life in regions with road salt or frequent moisture exposure. Consider the expected driving environment when weighing material choices.
Sump Design And Oil Control
The internal shape and baffle arrangement influence oil pickup and aeration during cornering, acceleration, and braking. A well-designed sump keeps oil around the pickup tube to prevent temporary oil starvation and reduces foaming that can impair lubrication.
If you drive in hilly terrain or do light towing, prioritize pans with deeper sumps or effective baffling to maintain consistent oil supply under dynamic conditions.
Serviceability And Drain Access
Routine oil changes are easier if the drain plug is accessible and the pan allows clearance for a wrench or socket. Some pans feature captive drain plugs or reinforced drain areas to reduce wear from repeated servicing.
Also consider whether the pan's shape complicates removal of the oil filter or access to nearby components. A design that simplifies routine maintenance saves time and reduces the chance of installation errors.
Gasket Interface And Sealing Surface
The flange where the pan meets the engine block must be flat and free of warping to achieve a reliable seal. The choice of gasket material and the condition of the sealing surface affect leak resistance and long-term reliability.
Torque specifications and an even tightening pattern are essential to prevent distortion. Inspect the pan's mounting flange and consider whether the pan is designed to work with OEM-style gaskets or requires a specific sealant or gasket type.
Build Quality And Fastener Integrity
Bolt hole alignment, thread quality, and the robustness of mounting points influence both installation and longevity. Poorly finished threads or inconsistent hole sizing can lead to stripped bolts or uneven clamping pressure.
Check for reinforced areas around high-stress sections such as the drain plug and mounting bosses. Durable construction reduces the likelihood of fastener failure or the need for repairs after road impacts.
How We Chose the Best Hyundai Tucson Oil Pan
We focused on parts specifically designed for the Hyundai Tucson, evaluating candidates across multiple objective criteria that matter to owners and technicians. Key factors included precise vehicle-specific fitment to ensure proper alignment with drain plugs and baffles; material and coating quality to resist corrosion and impact; oil capacity and sump design to maintain oil pickup and engine protection under different driving conditions; ease of access for routine oil changes and compatibility with common gaskets and sensors; and manufacturing tolerances that affect bolt hole alignment and sealing performance.We excluded universal, multi-vehicle pans and obviously modified or custom-fabricated units that require extensive alteration. We also screened out items lacking clear manufacturing specifications or that did not list fitment for the Hyundai Tucson. The final list favors parts that balance durability, serviceability, and straightforward installation for this specific vehicle application.
Our full evaluation process is outlined in our review methodology.
FAQ
How do I know if my Hyundai Tucson oil pan is leaking?
Common signs include oil spots under the parked vehicle, a persistent drop in engine oil level, or oil visible on the pan's exterior. You may also notice a burning oil smell if oil contacts hot exhaust components. Inspect the pan flange, drain plug, and gasket area for wetness to identify the likely source.
Can I replace the oil pan gasket without removing the pan?
Usually the gasket replacement requires removing the oil pan to properly clean sealing surfaces and verify flange flatness. In some limited cases, sealants are applied without full removal, but that is generally a temporary fix and may not address warped or damaged flanges.
What torque value should I use for oil pan bolts on a Hyundai Tucson?
Bolt torque values depend on bolt size and material, and they vary by model year and engine. It is best to follow the vehicle's factory torque specification to avoid over-tightening and flange distortion. If factory specs are not available, consult a service manual or a qualified technician for the exact figure.
When is an aftermarket oil pan a good option?
Aftermarket oil pans can be a suitable choice when the original pan is damaged, corroded, or unavailable. Look for units that specify exact fitment for the Hyundai Tucson and provide clear material and manufacturing details. Quality aftermarket pans can offer enhanced features like improved coatings or reinforced drain areas, but vetting specifications is important.
How much does repairing an oil pan usually involve?
Repair complexity depends on the damage. Small dents and thread repairs may be straightforward, while cracks or significant flange distortion often require replacement. Time required ranges from a simple drain and reinstall to a full drop of the pan for cleaning and gasket replacement. Labor intensity increases if suspension or crossmembers must be moved for access.
Can a damaged oil pan cause engine damage?
A severely leaking or punctured oil pan can lead to low oil levels and inadequate lubrication, which increases the risk of engine wear or failure. Minor leaks that are addressed promptly typically do not cause immediate catastrophic damage, but sustained low oil pressure can lead to serious engine problems.
Conclusion
When choosing an oil pan for a Hyundai Tucson, prioritize correct fitment, a corrosion-resistant material and a sump design that maintains oil around the pickup under real driving conditions. Equally important are a flat sealing flange, quality fastener areas, and a design that makes routine servicing straightforward.Weigh the tradeoffs between material, impact resistance, and serviceability based on how and where you drive. Selecting a pan that matches the vehicle's specifications and offers durable construction will reduce the chance of leaks and simplify future oil maintenance.
Explore More:
- Check out all Hyundai Tucson parts & accessories
- Explore Oil Pans Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
