Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Picking the right oil filter housing for your Toyota Avalon matters because it affects engine protection, leak prevention, and serviceability. A poor fit or weak seal can lead to oil loss, contamination risk, and extra labor during routine maintenance. This guide covers seven shortlisted oil filter housings selected for their fitment, sealing performance, and durability. Below we explain the criteria we used and what to look for when choosing the right housing for your vehicle, then present the top options and what makes each choice practical for different needs.
Looking for other parts? See all Toyota Avalon parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Pilida Aluminum Oil Filter Housing Cap Assembly (15620-31060) |  |
| Most Popular A crowd favorite that many people choose with confidence | Yinlowa Aluminum Oil Filter Housing Cap Assembly with Oil Plug (15620-31060) |  |
| Best Quality Built to a higher standard if you want something more solid | APSG Toyota Genuine Oil Filter Housing Cap Kit with 04152-YZZA1 Oil Filter |  |
| Best Budget The cheapest option that still gets the job done reliably | Zorratin Aluminum Oil Filter Housing Cap Assembly (15620-31060) |  |
| Most Sold A high-volume bestseller chosen again and again | Yinlowa Aluminum Oil Filter Housing Cap Assembly Kit for Toyota Avalon |  |
| Best Value for Money The sweet spot between price and what you get | X AUTOHAUX Oil Filter Housing Cap Assembly for Toyota Avalon and Compatible Toyota/Lexus Models |  |
| Best Overall The best all-around choice for most situations | Toyota Genuine Oil Filter Housing Cap and Drain Plug (15620-31060 / 15643-31050) |  |
1. Pilida Aluminum Oil Filter Housing Cap Assembly (15620-31060)
| Material | Aluminum |
|---|---|
| Automotive Fit Type | Vehicle Specific Fit |
| OEM Part Number | 15620-31060 1562031060 15643-31050 |
| Manufacturer | Pilida |
This Pilida oil filter housing cap replaces the factory plastic cover with a machined aluminum unit designed to fit Toyota models that use part number 15620-31060. It is installed during routine oil service when replacing the filter and uses the same removal tool interface as the factory cap. Notable features include an aluminum construction for improved durability, included oil drain plug and O-rings, and compatibility with a wide range of Toyota engines listed by the manufacturer. In real-world use the housing avoids the cracking and thread damage that can affect plastic caps and makes removal and reinstallation feel more solid. Some users note the supplied internal filter spring or stand may differ from the factory part on certain models and might need swapping from the original unit for proper filter seating. If you prefer to keep the factory filter element you can do so; the cap functions as a direct replacement without altering other service procedures.
Best for: A reliability-focused buyer who wants a stronger, long-lasting replacement for the factory plastic oil filter housing cap on Toyota vehicles and prefers parts that reduce the chance of damage during service.
Less Ideal for: Buyers who want a complete filter and cap service kit with a specific OEM-branded filter included or those unwilling to swap small internal parts if required should consider other options.
- Aluminum construction increases strength and resistance to cracking compared with plastic caps
- Includes oil drain plug and O-rings so you get necessary sealing components at installation
- Made to match factory fit and removal tool pattern for straightforward swap-in
- Listed to replace Toyota part number 15620-31060 so fitment matches many Toyota models
- May require swapping the original filter spring or stand on some Toyota engines for correct filter alignment
- Does not include a brand-name Toyota filter element so you may want to reuse the OEM filter
- Aftermarket fitment means slight variations are possible between production batches
Verdict A durable aluminum replacement that strengthens the Toyota oil filter housing location and closely matches factory fit, but may need a minor spring swap on some engines.
2. Yinlowa Aluminum Oil Filter Housing Cap Assembly with Oil Plug (15620-31060)
| Material | Aluminum |
|---|---|
| Product Grade | Replacement Part |
| OEM Part Number | 15620-31060 / 1562031060 |
| Automotive Fit Type | Vehicle Specific Fit |
This aluminum oil filter housing cap assembly replaces the stock plastic cap with a metal unit that includes the cap, drain plug, and new gasket for a complete swap during an oil service. It is intended for Toyota vehicles that use part number 15620-31060 and installs by hand-threading then tightening with a wrench, making it a straightforward DIY job during an oil change. The aluminum construction resists cracking from over-tightening and high under-hood temperatures better than the factory plastic piece, so it reduces the chance of leaks and repeated replacements. Included parts simplify installation and help ensure a proper seal. Some users report the internal shaft or filter seating differs slightly from their original, so double-check fitment and inspect the filter engagement after installation. This is a practical upgrade for owners who want a longer-lasting, service-friendly alternative to the factory cap at minimal effort and mechanical skill.
Best for: Convenience-driven owners who prioritize simple, low-effort upgrades that reduce future maintenance hassle and make routine oil changes easier.
Less Ideal for: Buyers who need exact factory-matching internal geometry for nonstandard aftermarket filters or those unwilling to verify fitment before first use.
- Aluminum construction is far more durable than the factory plastic cap and resists cracking.
- Includes cap, drain plug, and gasket for a complete replacement during oil service.
- Designed as a direct replacement for the specified part number for straightforward installation.
- Helps prevent slow oil leaks associated with degraded plastic housings and reduces repeat repairs.
- Some reports note the internal filter shaft or filter seating can be slightly different from the original, requiring inspection after fitment.
Verdict A durable, easy-to-install metal replacement that simplifies oil changes and avoids the short lifespan of the factory plastic cap.
3. APSG Toyota Genuine Oil Filter Housing Cap Kit with 04152-YZZA1 Oil Filter
| Brand | APSG |
|---|---|
| Material | Aluminum, Paper |
| Thread Size | NPT 3/4" |
| Automotive Fit Type | Vehicle Specific Fit |
This kit replaces the fragile plastic oil filter housing cap with a factory-style metal housing cap and bundles the 04152-YZZA1 oil filter plus a cap wrench and crush washer to simplify oil service. For Toyota Avalon owners the metal cap reduces the risk of cracking or stripping during removal, so shop or DIY oil changes are less likely to end with a damaged cover. The included filter is a direct-fit replacement designed to match factory fitment and filtration performance, while the cap wrench fits the housing and makes removal straightforward. Practical benefits include a longer-lasting housing, fewer surprises at service time, and a cleaner, leak-free reassembly when installed with the provided crush washer. Limitations: this kit uses the 04152-YZZA1 filter variant which is not the original part for every Avalon year and engine combination, so confirm compatibility before ordering; some installers report needing to transfer a center tube from the old housing on certain models. Expect a small installation step for those edge cases rather than a zero-mod fit-and-forget swap.
Best for: Performance-oriented Toyota Avalon owners who prioritize durable, factory-quality service parts and want to avoid repeated housing failures during routine oil changes.
Less Ideal for: Owners who prefer an exact-year OEM part number without any possibility of minor fit adjustments should consult dealer parts lists before buying or choose a kit specified for their exact engine and year.
- Replaces plastic cap with durable metal housing to reduce cracking or breakage during service.
- Includes matching 04152-YZZA1 oil filter for a single convenient kit.
- Supplies a correctly sized cap wrench for easier removal and installation.
- Comes with a crush washer to ensure a reliable, leak-free seal.
- Filter variant in the kit may not match every Avalon engine year and could require verification or a tube swap on some models.
Verdict A solid upgrade for Avalon drivers who want a durable, factory-style metal oil filter housing cap and a bundled filter and wrench, provided you confirm the 04152-YZZA1 variant fits your specific Avalon model.
4. Zorratin Aluminum Oil Filter Housing Cap Assembly (15620-31060)
| Material | Aluminum |
|---|---|
| Vehicle Service Type | Car |
| Manufacturer | Zorratin |
| Model | 15620-31060 |
This aluminum oil filter housing cap assembly replaces the factory plastic cap and includes the cap, drain plug, and o-ring for a straightforward swap during an oil change. It is intended as a direct replacement for Toyota part numbers 15620-31060 and related plug part numbers, so installation is typically a simple hand-thread and light wrench tweak. The aluminum construction is noticeably more durable than stock plastic and reduces the risk of cracking during routine service. Buyers report good fitment across multiple Avalon-compatible model years and generally leak-free performance when the plug and o-ring are installed correctly. One practical limitation is the drain check valve design; a few users found oil can leak from the drain hole when the plug is removed, which can make draining messier than the factory setup. As a budget option it gives a durable, factory-style fit at a low cost, but expect to double-check seal seating during installation to avoid minor leaks.
Best for: Budget-conscious owners seeking a durable, low-cost replacement for the Toyota Avalon oil filter housing cap who prioritize easy, factory-style swaps during routine maintenance.
Less Ideal for: Users who want a perfect factory-matching drain behavior or who need a plug/check valve design identical to the original should consider higher-end alternatives or factory parts.
- Aluminum construction is more durable than factory plastic and resists cracking during service.
- Includes cap, drain plug, and o-ring so you get the main components needed for replacement.
- Designed to match OEM fitment and part numbers for straightforward installation.
- Low-cost option that upgrades a common failure point without requiring other parts.
- Some units have reported oil leaking from the drain/check valve when the plug is removed, requiring careful handling during drain operations.
Verdict A wallet-friendly aluminum replacement that improves durability over plastic factory caps but may require careful sealing to avoid drain-hole leakage.
5. Yinlowa Aluminum Oil Filter Housing Cap Assembly Kit for Toyota Avalon
| Model | 15620-31060 |
|---|---|
| Exterior | Aluminum |
| Vehicle Service Type | Car, Truck, Sports Utility Vehicle, Van |
This Yinlowa oil filter housing cap assembly replaces the factory plastic cap on Toyota Avalon engines with a machined aluminum housing, an included oil filter, O-rings, drain plug, and a small wrench. It is installed during routine oil changes by removing the original cap and screwing the new unit into place, then tightening for a secure seal. The aluminum construction resists cracking and overheating better than plastic, which reduces the chance of oil leaks after repeated service or over-tightening. Buyers also get a spare drain plug and an oil filter so the kit covers a full service step. Some users report the filter shaft is slightly shorter than the original on rare units, so check fit and clearance during installation. This is a practical, service-oriented upgrade that simplifies future oil changes and aims to match factory fit while offering improved durability compared with the stock plastic housing.
Best for: Practical, risk-averse Avalon owners who prefer a factory-quality replacement that reduces the chance of leaks and broken plastic housings during routine maintenance.
Less Ideal for: Owners who want an exact OEM part match down to every internal dimension or those who prefer to use only dealer-sourced components should consider alternatives.
- Aluminum housing that is more resistant to cracking and heat than the original plastic cap
- Includes oil filter, O-rings, drain plug, and wrench so it covers a full oil change step
- Direct-fit design intended for Toyota Avalon which simplifies installation
- Multiple quality checks and testing claimed by the manufacturer to ensure fit and function
- Some units have a shorter filter shaft than the OEM part which may cause fitment concerns on a small number of vehicles
Verdict A durable aluminum replacement housing for Toyota Avalon owners who want a tougher, service-friendly upgrade to the stock plastic cap.
6. X AUTOHAUX Oil Filter Housing Cap Assembly for Toyota Avalon and Compatible Toyota/Lexus Models
| Material | Metal, Plastic |
|---|---|
| Vehicle Service Type | Car |
| Position | Inner |
| Manufacturer Part Number | a22033100ux0092 |
This X AUTOHAUX oil filter housing cap replaces a worn or damaged factory cap on compatible Toyota and Lexus engines to stop oil leaks and restore a proper seal. It is typically used during routine maintenance or when an original cap is cracked or stripped; installation requires removing the old cap and torquing the new cap to factory spec, and many owners note it fits without modification. The part combines metal and plastic components for a balance of durability and affordability and references common OEM part numbers for straightforward fitment checks. Practical benefits include restoring oil system integrity, being vehicle-specific which simplifies selection, and offering a lower-cost alternative to dealership parts. Limitations are typical of budget aftermarket caps: material blend may not match the lifespan of higher-end factory-quality caps and proper installation requires the correct oil-cap wrench and attention to the O-ring to avoid leaks. Expect a straightforward repair that gets a leaking filter cap back to working condition at a modest price point.
Best for: Practical optimizers looking to repair a leaking or damaged oil filter cap on a Toyota Avalon without paying dealership prices and who prioritize straightforward, cost-effective maintenance solutions.
Less Ideal for: Users seeking an exact factory-material match for heavy-duty longevity or those who prefer dealer-sourced parts with full OEM material specification should consider alternatives.
- Vehicle-specific fit for many Toyota and Lexus models including Avalon and Camry, reducing fitment guesswork.
- References common OEM part numbers for easier cross-checking with factory parts.
- Metal and plastic construction offers a balance of strength and lower cost compared with all-plastic caps.
- Helps stop oil leaks and restore proper sealing when replacing a damaged or cracked original cap.
- Build uses mixed materials so long-term durability may be lower than higher-end factory-quality caps.
- Requires the correct oil filter cap wrench and care with the O-ring during installation to ensure a leak-free seal.
Verdict A budget-friendly, vehicle-specific replacement that restores a leaking oil filter cap on Toyota Avalon models with reasonable fit and function, but it may not match dealer-grade longevity.
7. Toyota Genuine Oil Filter Housing Cap and Drain Plug (15620-31060 / 15643-31050)
| Material | Stainless Steel |
|---|---|
| OEM Part Number | 15620-31060 |
| Includes | Housing cap and drain plug |
| Vehicle Service Type | Cars, SUVs |
This is a genuine Toyota replacement oil filter housing cap and matching drain plug sold as a factory-quality metal assembly. It replaces the common plastic housing used on many Toyota models and is typically installed during a DIY oil service or as an upgrade to prevent cracking and leaks. The housing is stainless steel with a machined finish and ships with the factory label and part numbers 15620-31060 and 15643-31050. In practice the metal housing installs like the original, torques to factory specifications, and offers a more durable alternative that resists over-tightening and long-term degradation. Users report that the drain port seals reliably and the part fits various Toyota applications when the correct internal filter sizing is present. Limitations to note are fitment sensitivity across model years and filter cartridge types, so confirm compatibility before buying, and the package protection in transit can be minimal which may concern collectors or resellers.
Best for: Buyers who want a balanced, long-lasting factory replacement that reduces the risk of plastic housing failures while keeping service procedures familiar.
Less Ideal for: Drivers who need a universal or aftermarket housing for nonstandard filter conversions or who cannot verify exact model-year fitment should consider other options.
- Factory genuine Toyota part for factory-quality fit and finish
- Stainless steel machined construction is more durable than the original plastic housing
- Includes the matching drain plug so oil can be drained without removing the entire housing
- Installs and torques to factory specifications for predictable service procedure
- Fit can vary by model year and internal filter carrier size, requiring verification before purchase
- Packaging during shipment may be minimal and can arrive with cosmetic box damage
Verdict A durable factory replacement that upgrades plastic housings to stainless steel for owners seeking a reliable, OEM-quality solution provided you confirm model-year fitment.
Choosing the Right Toyota Avalon Oil Filter Housing: Key Factors to Consider
Fitment and Mounting Accuracy
Correct fitment is critical because the housing must align precisely with the engine’s mounting points and oil passages. Poor alignment can cause leaks, stress on fasteners, or difficulty seating the oil filter element. When fitment is accurate, installation is quicker and service bolts torque evenly, which reduces the chance of thread damage.
Always verify that bolt patterns, orientation, and clearance match your vehicle’s engine layout. Consider whether the housing allows convenient access to the filter and fasteners during routine changes to minimize workshop time.
Seal and Gasket Design
The quality of the seal between the housing and the engine block, and between the housing and the filter cap, determines leak resistance. A robust gasket or integrated seal must sustain oil temperatures and pressure cycles without hardening or deforming. Sealing design also affects how evenly pressure is distributed across the mating surfaces.
Look for housings with durable gasket materials and clear sealing surfaces. Consider whether replacement gaskets or seals are available separately and how easy they are to replace when performing maintenance.
Material Strength and Resistance to Cracking
Housings are exposed to thermal cycling and mechanical stress, so materials that resist cracking and warping extend service life. Metal housings often offer higher structural strength, while engineered composites can reduce weight but must be validated for long-term heat resistance. Cracking tends to occur around bolt bosses or thin sections, which compromises sealing.
Inspect design features like ribbing, wall thickness, and reinforcements around mounting holes. Durable materials reduce the risk of unexpected failures that could lead to oil leaks or engine damage.
Compatibility With Filter Elements
Compatibility with standard oil filter elements affects both filtration performance and service convenience. The housing must accept the proper filter size and ensure the bypass and anti-drainback features function as intended. Mismatched elements can impair oil flow or bypass protection.
Confirm that the housing supports the OEM or equivalent filter specifications, including thread type and depth, gasket seating, and bypass valve clearance. This reduces the chance of installation errors during routine changes.
Serviceability and Access
A housing that simplifies filter changes saves time and reduces the likelihood of cross-threading or over-torquing. Consider how much clearance exists around the filter cap, whether fasteners require special tools, and if the housing orientation complicates oil drainage.
Good serviceability also means replacement gaskets and seals are easy to source and that the housing design minimizes trapped oil during removal. These factors affect routine maintenance costs and the convenience of do-it-yourself repairs.
Corrosion and Chemical Resistance
Exposure to oil, additives, and underhood contaminants requires materials and finishes that resist corrosion and chemical degradation. Surface treatments or corrosion-resistant alloys prolong the housing life and maintain sealing surface integrity.
Assess whether the housing has protective coatings, corrosion-resistant fasteners, and materials rated for automotive fluids. Long-term resistance lowers the risk of leaks and reduces the need for premature replacement.
FAQ
What are common symptoms of a failing oil filter housing?
Common signs include visible oil leaks around the housing area, low oil pressure warnings, or oil pooling under the vehicle. You may also notice oil smell in the cabin or transient pressure drops during startup. These symptoms often indicate a compromised seal, cracked housing, or loose fasteners.
Can I replace the oil filter housing myself?
Many technicians and experienced DIYers can replace an oil filter housing with basic hand tools, provided they have the correct replacement parts and torque specifications. Tasks typically include draining some oil, removing fasteners, replacing the gasket or seal, and refilling to the proper level. If access is limited or the job requires engine support components to be removed, professional service may be preferred.
How do I identify the correct part number for my Toyota Avalon?
Locate the vehicle identification and engine code information, then cross-reference those details with parts diagrams or manufacturer publications. Many housings list compatible engine codes and model years in their fitment notes, which helps ensure you select the correct part number. When uncertain, consult repair documentation or a trusted parts database.
What causes an oil filter housing leak?
Leaks usually stem from deteriorated gaskets or seals, loose or improperly torqued fasteners, or hairline cracks in the housing itself. Thermal cycling and vibration can accelerate seal wear or cause stress fractures around mounting points. Regular inspection during maintenance often catches issues before significant leakage occurs.
Should I replace the gasket or the whole housing when I find a leak?
It depends on the source of the leak. If the gasket or seal is damaged but the housing is structurally sound, replacing only the gasket may be sufficient. However, if the housing shows signs of cracking, deformation, or compromised mounting bosses, replacing the entire housing is usually the safer long-term solution. Consider ease of access and long-term reliability when deciding.
How We Chose the Best Toyota Avalon Oil Filter Housing
We evaluated candidate oil filter housings using criteria that reflect real-world ownership and maintenance concerns for the Toyota Avalon. Primary filters were fitment accuracy to factory mount points and bolt pattern, and sealing performance under operating temperatures. We also assessed material durability and resistance to cracking, the integrity and design of the gasket or seal interface, and ease of access for routine filter changes. Additional considerations included compatibility with OEM filter elements and the clarity of part number documentation to help ensure correct selection. We excluded units that required extensive modification, adapters, or that lacked clear fitment data for the Toyota Avalon. Units with known manufacturing quality issues or poor reported long-term sealing performance were not considered. The result is a focused list prioritizing correct fit, reliable seals, and durable construction.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right oil filter housing for a Toyota Avalon means balancing fitment accuracy, sealing reliability, and material durability. Prioritize housings that clearly match your engine mounting and offer robust gasket or seal designs to minimize leak risk. Also weigh serviceability and the availability of replacement seals when making a decision. Focusing on these core factors will reduce maintenance hassle and help maintain consistent oil pressure and engine protection over time.
Explore all Toyota Avalon parts & accessories.
