Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Picking the right oil filter housing matters because it affects oil routing, engine lubrication, and leak prevention. If the housing or its sealing surfaces fail, you can see oil loss, pressure fluctuations, and potential engine damage. This guide presents seven shortlisted oil filter housings chosen for the Lincoln MKX that meet common repair needs and durability expectations. We evaluated each option on criteria such as fitment accuracy and seal reliability to help you narrow choices quickly. Read on to understand the key factors we used and what to look for when replacing this component.
Looking for other parts? See all Lincoln MKX parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | ZONFANT Aluminum Oil Filter Cap Cover (Replaces FT4Z6A832C) for Ford and Lincoln V6 Engines |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium Oil Cooler Assembly for Ford Edge / Lincoln MKX (2015-2018) |  |
| Best Value The sweet spot between price and what you get | ZONFANT Oil Filter Cap Cover for Ford & Lincoln 2.7L/3.0L V6 (replaces FT4Z6A832C) |  |
| Best budget The cheapest option that still gets the job done reliably | A ABSOPRO Engine Oil Filter Housing Cover Cap (FT4Z-6A832-C) |  |
| Most Popular A crowd favorite that many people choose with confidence | Dasbecan Oil Filter Cap Cover for Ford Fusion / F-150 (Replaces FT4Z6A832C) |  |
1. ZONFANT Aluminum Oil Filter Cap Cover (Replaces FT4Z6A832C) for Ford and Lincoln V6 Engines
| Manufacturer | ZONFANT AUTO PARTS |
|---|---|
| Material Type | Aluminum |
| Included Components | 1 Aluminum Oil Filter Cap |
| Manufacturer Part Number | ZON-OF-FT4Z6A832C-AL |
This aluminum oil filter cap replaces the stock plastic cap on select Ford and Lincoln V6 engines and is supplied with the gasket and a filter element for a straightforward swap. It is typically used during routine oil changes to replace a worn or stripped plastic housing cap or when upgrading to a more durable component. The all-aluminum construction resists corrosion, impact, and heat better than the original plastic piece and gives a more solid fit and finish under the hood. Included seals and a drop-in design make installation simple for a DIYer with basic tools, and the part cross-references factory part numbers FT4Z6A832C and FT4Z6A862-C for correct fitment on the listed model years. Limitations are fitment specificity and generation differences; verify the exact year and engine variant before buying since later-model applications like some 2023 Bronco filters may differ in size and are not interchangeable.
Best for: Balanced buyers who want a longer-lasting, factory-replacement quality upgrade over the stock plastic oil filter cap and plan to do routine maintenance themselves.
Less Ideal for: Owners who need a one-size-fits-all solution across multiple model years or those unsure of their exact engine variant should look for an alternative with broader compatibility or verify fitment before purchasing.
- Aluminum construction improves durability and resistance to corrosion and impact compared with stock plastic caps
- Supplied with gasket and filter element for a ready-to-install replacement
- Direct replacement for factory part numbers FT4Z6A832C and FT4Z6A862-C for listed vehicle applications
- Vehicle-specific fit reduces installation guesswork when matched to the correct model years
- Fitment is specific to certain model years and V6 engine variants, so it will not work across all Lincoln MKX generations
- Not compatible with some later-model filters that changed size or design
Verdict: A sturdier aluminum replacement cap that upgrades durability and simplifies oil-change maintenance for the specified Lincoln and Ford V6 models.
2. A-Premium Oil Cooler Assembly for Ford Edge / Lincoln MKX (2015-2018)
| Compatible vehicles | Ford Edge 2015-2018, Lincoln MKX 2016-2018 |
|---|---|
| Compatible engines | 2.0L, 2.7L, 3.5L |
| Material | Aluminum |
| Manufacturer part number | APOFA042 |
| OEM reference numbers | F2GP7869DA, F2GZ7A095A, V25603025 |
This A-Premium oil cooler assembly is a direct-replacement oil cooler intended for Ford Edge (2015-2018) and Lincoln MKX (2016-2018) engines, designed to manage engine oil temperature and protect internal components from heat-related wear. Installed in place of the factory unit, it circulates engine oil through the aluminum cooler to shed heat and maintain lubrication efficiency during normal driving and higher-load conditions. Key features visible in the listing include aluminum construction for good thermal conductivity and compatibility with several OEM reference numbers to match factory fitment. The cooler ships without gaskets or seals, so expect to reuse serviceable seals or purchase replacement gaskets separately during installation. Practical benefits include restored oil temperature control after a failed cooler and a one-year unlimited-mileage guarantee from the brand. Limitations are that it is a vehicle-specific replacement for the listed Edge and MKX applications only and that missing seals add a small extra parts step at installation.
Best for: Performance-oriented buyers who prioritize maintaining engine reliability and temperature control under load and want a high-quality replacement that restores factory cooling performance.
Less Ideal for: Buyers seeking a universal or multi-vehicle cooler or those who want a complete install kit with seals included should consider other options.
- Aluminum construction for efficient heat dissipation
- Direct-replacement design matched to factory reference numbers
- Covers common Edge and Lincoln MKX engine variants for correct fitment
- Comes with a one-year unlimited-mileage guarantee from the brand
- Does not include gaskets or seals needed for a complete install
- Fitment limited to specific 2015–2018 Edge and 2016–2018 MKX engine configurations
Verdict: A vehicle-specific aluminum oil cooler that restores factory oil temperature control for Edge and MKX engines while offering a one-year guarantee.
3. ZONFANT Oil Filter Cap Cover for Ford & Lincoln 2.7L/3.0L V6 (replaces FT4Z6A832C)
| Compatible engines | 2.7L V6, 3.0L V6 |
|---|---|
| Replaces part number | FT4Z6A832C, FT4Z-6A832-C |
| Material Type | Abs |
| Included components | 1 Oil Filter Cap Cover |
This ZONFANT oil filter cap cover is a direct-replacement lid for the oil filter housing on select Ford and Lincoln V6 models that use part FT4Z6A832C. It ships as a single cover and is molded from ABS to resist heat, impact, and corrosion; the listing says it comes with the required gasket and a drop-in filter in some orders so installation is straightforward and can be completed during a routine oil service. For Lincoln MKX owners with the 2.7L twin-turbo the main benefit is restoring a broken or cracked cap with a part that matches factory fitment at a much lower cost than dealer sources. Several buyers report an exact fit and easy swap, while a minority experienced fit issues, so verifying fit before installation is wise. This is a budget-friendly replacement intended to return the housing to service rather than an upgraded performance component, and durability will depend on correct installation and normal driving conditions.
Best for: Practical owners who prioritize low-cost, factory-style repairs and want a straightforward part to replace a broken oil filter cap on their Lincoln MKX without paying dealer prices.
Less Ideal for: Owners seeking a heavy-duty or performance upgrade to the oil filter housing or those unwilling to verify fit before installation should look elsewhere.
- Vehicle-specific replacement that matches the OEM equivalent part number
- Made from ABS for corrosion, heat, and impact resistance
- Supplied with gasket and ready for a straightforward replacement during oil service
- Affordable alternative to dealer-sourced parts
- Some customers reported fitment failures so compatibility checks are necessary
- Not an upgraded or performance part—meant only to restore factory function
Verdict: A low-cost, factory-equivalent replacement cap that restores oil filter housing function for Lincoln MKX 2.7L/3.0L V6 models.
4. A ABSOPRO Engine Oil Filter Housing Cover Cap (FT4Z-6A832-C)
| Brand | A ABSOPRO |
|---|---|
| Material | Plastic |
| Product Grade | Replacement Part |
| Automotive Fit Type | Vehicle Specific Fit |
| Manufacturer Part Number | FT4Z-6A832-C, FT4Z6A832C |
This A ABSOPRO oil filter housing cover cap is a budget replacement designed to seal the oil cartridge on Lincoln MKX 2.7L and 3.0L engines. It functions as the threaded cap that holds the cartridge-style oil filter in place and prevents leaks when the system is pressurized. Made of plastic, the cap is corrosion-resistant and intended to be swapped whenever the oil filter is changed. Installation is straightforward for a mechanic or experienced DIYer, though professional installation is recommended to ensure proper torque and seal. The main practical benefit is a low-cost way to restore a failing or cracked factory cap and avoid oil leaks that can lead to engine damage. Limits to consider are its plastic construction compared with higher-end metal caps and the need to confirm exact engine compatibility before buying; fitment is vehicle-specific. For budget-focused owners of the Lincoln MKX this cap provides a functional, inexpensive replacement, but those seeking longer-term durability may prefer a higher-grade aftermarket or factory-quality part.
Best for: Budget-conscious Lincoln MKX owners who prioritize low upfront cost and need a straightforward replacement during routine oil changes.
Less Ideal for: Buyers who want a longer-lasting, premium metal cap or who prefer parts with extended durability guarantees should consider higher-end alternatives.
- Low-cost replacement that restores the oil filter housing seal
- Plastic construction resists rust and is lightweight
- Sold as a single, vehicle-specific part for direct swap during routine oil service
- Plastic material is less durable than metal alternatives
- Requires correct engine fitment verification before installation
Verdict: A no-frills, affordable replacement cap that gets the Lincoln MKX oil cartridge sealed again, but metal upgrades last longer.
5. Dasbecan Oil Filter Cap Cover for Ford Fusion / F-150 (Replaces FT4Z6A832C)
| Compatible vehicles | Ford Fusion 2017-2020, F150 2015-2020 |
|---|---|
| Closure Type | Twist-On |
| Style Name | Modern |
This Dasbecan oil filter cap replaces the factory plastic cap and includes a replacement disposable filter and new seals. It is used when the original cap is cracked, leaking, or the pressure relief valve inside has failed; installation is a simple twist-on swap that typically takes a few minutes. The housing is molded from a heat-resistant plastic and ships with O-rings and the internal pressure relief stem and spring, so it restores sealing and oil flow functions without needing additional parts. Buyers will appreciate the included filter for convenience, though several users report the disposable filter is lower quality than name-brand cartridges and many prefer to fit a preferred filter instead. The cap’s fitment and thread engagement match factory geometry, so it seats and seals well after a few heat cycles. This is a budget-friendly, quick fix for a leaking or damaged housing, but if you want a high-end replacement filter included you should plan to install a separately sourced cartridge.
Best for: Convenience-driven buyers who want a quick, low-cost repair or spare to restore leak-free operation without a trip to a dealer or lengthy downtime.
Less Ideal for: Drivers who expect a premium included filter or who prefer buying a complete factory-branded replacement filter and cap assembly should consider other options.
- Direct vehicle-specific replacement for broken or leaking oil filter caps
- Includes new seals and the internal pressure relief assembly for straightforward installation
- Made from heat-resistant plastic with factory-style threads for proper seating
- Affordable option that lets you keep a spare on hand
- Included disposable filter is reported by multiple users to be lower quality than standard brand filters
Verdict: A budget-friendly, vehicle-specific replacement cap that restores sealing and oil flow quickly for convenience-focused owners.
Choosing the Right Lincoln MKX Oil Filter Housing: Key Factors to Consider
Fitment and Mounting Accuracy
Correct fitment is the baseline for a successful replacement. A housing that matches factory mounting points and oil passages reduces the risk of misalignment that can stress fasteners or cause uneven sealing.
Poorly fitting housings may require shims or forceful installation, which increases the chance of hairline cracks or stripped threads. Confirming fitment also minimizes installation time and the need for additional gaskets or adaptors, making the repair more straightforward and reliable.
Seal and Gasket Integration
The housing-to-engine seal is where most leaks originate, so integrated sealing features matter. Look for housings designed to accept OEM-style gaskets or those with properly sized O-ring grooves and flat, machined mating surfaces.
A design that protects the gasket from extrusion and offers consistent compression across the contact area reduces leak risk. Consider whether replacement gaskets or seals are easy to source and whether the housing design facilitates correct torqueing without distorting the seal.
Material Strength and Crack Resistance
Housings experience thermal cycling and mechanical stress, so material choice affects long-term durability. Materials that resist embrittlement and tolerate heat cycling are less likely to develop stress cracks over time.
Reinforcements around bolt bosses and thin sections help prevent cracking during installation and operation. Avoid housings with excessive thin-wall areas or visible stress concentrators, especially near fluid passages and mounting points, to reduce the chance of failure under normal service conditions.
Oil Flow and Internal Passage Design
Internal oil routing impacts filtration efficiency and engine lubrication. A housing with smooth, unobstructed passages and properly sized ports ensures steady oil flow and minimizes pressure drops that can affect filter performance.
Consider designs that reduce turbulence and avoid sharp turns or narrow necks that can trap contaminants. Properly arranged ports also make it easier to service the filter element and related lines without accidental kinking or interference.
Ease of Service and Installation
A service-friendly housing shortens repair time and reduces the chance of installation errors. Look for features like accessible fasteners, clear O-ring seats, and compatible filter locations that allow you to reach components without extensive disassembly.
Housings that require specialized tools or removal of multiple ancillary parts increase labor and the potential for mistakes. Consider whether the design allows reusing common service items and whether replacement seals and hardware are standard sizes.
Compatibility with Seals and Replacement Parts
Availability of compatible gaskets, O-rings, and replacement hardware affects long-term maintenance. Choosing a housing that uses common seal sizes and standard filter interfaces helps ensure you can perform repairs quickly when needed.
If a housing uses proprietary or hard-to-find parts, future maintenance becomes more complicated and may require ordering specialty items. Confirm part numbers and seal specifications to make sure replacement components are accessible.
How We Chose the Best Lincoln MKX Oil Filter Housing
We focused on components that meet the specific fit and function requirements of the Lincoln MKX engine environment. Selection prioritized housings designed to match factory mounting points and oil routing so the part installs cleanly without modification. We evaluated materials and manufacturing quality that affect long-term resistance to cracking and warping, along with the design features that support reliable sealing against oil leaks.Seal performance and gasket integration were core filters because many field failures stem from degraded seals or poor mating surfaces. We also considered ease of installation, including whether common fasteners and O-rings are readily accessible during service. Parts lacking clear fitment documentation, or those that required significant modification, were excluded. Finally, durability indicators such as reinforced materials and thoughtful coolant or oil passage layouts were weighed to ensure the shortlist favors longevity and dependable performance.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common signs that the oil filter housing needs replacement?
Common signs include visible oil leaks around the housing, a strong oil smell in the engine bay, or fluctuating oil pressure readings. You may also notice oil collecting under the vehicle or contamination on surrounding components. Any of these symptoms often indicate a failing seal, cracked housing, or loose mounting.
Can I replace the oil filter housing myself?
Many owners can handle this repair with basic mechanical skills and the right tools because it typically involves draining the oil, removing fasteners, swapping the housing and seals, and refilling fluids. However, tight access, torque specifications, and proper sealing are important, so take care to follow service instructions or consult a technician if you are unsure.
How important is using the correct gasket or seal?
Using the correct gasket or O-ring is essential to prevent leaks and maintain oil pressure. Incorrect or damaged seals can fail quickly even if the housing fits correctly. Always inspect mating surfaces for damage and replace seals with the specified type to ensure a reliable seal.
What causes an oil filter housing to crack?
Cracking can result from thermal cycling, over-tightening of bolts, impact damage, or material fatigue over time. Thin-wall designs and stress concentrators around bolt holes increase susceptibility. Proper installation torque and avoiding overtightening help reduce the risk of inducing cracks.
Will a leaking oil filter housing affect engine performance?
Yes, a leak can lower available oil volume and pressure, which may lead to reduced lubrication and increased engine wear. Small leaks might only produce oil spots, but persistent or large leaks can cause noticeable pressure drops and trigger warning lights, so addressing leaks promptly is prudent.
How do I find the correct part number for a replacement housing?
The correct part number typically depends on the vehicle's engine and production details. Check the vehicle identification resources, service manual, or an OEM parts catalog for the exact part number. Cross-referencing seals and bolt patterns can also help confirm compatibility before purchasing.
Conclusion
When choosing an oil filter housing for a Lincoln MKX, prioritize fitment accuracy and reliable sealing. Those two factors most directly affect leak prevention and oil pressure stability, which are critical to engine health.Also weigh material durability, serviceability, and the availability of compatible gaskets or O-rings. Balancing these tradeoffs will help you select a housing that reduces the chance of repeat work and supports dependable engine lubrication over time.
Explore More:
- Check out all Lincoln MKX parts & accessories
- Explore Oil Filter Housings Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
